Related
Hey there guyz,
I am trying to flash new recovery but my explorer isn't connecting properly when I connect it to pc. My pc gives me an error that device malfunctioned etc. I have tried alot of thing in these 3 or 4 days but issue still exists and I am unable to flash new recovery to my device kindly help me.
1. Tried to Flash recovery with app (not working)
2. fastboot is not working when I connect USB cable it say fastboot USB but as soon as computer shows my device (Fastboot USB) turns to (fastboot)
3. Tried each and every driver on windows 8 64bit none of them worked for me
I am sure that there is something wrong with my device I dont know what it is or I am doing something wrong. I have rooted my devices using jaggyjags tut year ago. Here is the link of that tut.
http://forum.xda-developers.com/showthread.php?t=1415223
Now I am trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=2217680 but it hang at the sense 5 logo so in description they said that try CWM 6 or TWRP 2.6 recovery if you hang at bootanimation.
bump anyone???
what is the current recovery in the phone?
Again same issue I am unable to flash stock recovery to my htc explorer. Now what I am trying to do is unroot my phone, install stock recovery, Stock ROM and hard reset my phone because I am having issues with soft keys and touch it works fine sometime but sometime it doesn't. Now I have unroot my phone and I am unable to connect my phone in fastboot mode. It get stuck at waiting for device. Urgent replies needed.
Edit: I am using CMW touch philz recovery
Regards,
Usman Aly
try
Usman Aly said:
Again same issue I am unable to flash stock recovery to my htc explorer. Now what I am trying to do is unroot my phone, install stock recovery, Stock ROM and hard reset my phone because I am having issues with soft keys and touch it works fine sometime but sometime it doesn't. Now I have unroot my phone and I am unable to connect my phone in fastboot mode. It get stuck at waiting for device. Urgent replies needed.
Edit: I am using CMW touch philz recovery
Regards,
Usman Aly
Click to expand...
Click to collapse
Try this method http://forum.xda-developers.com/showthread.php?t=2183269
Aasim4u said:
Try this method http://forum.xda-developers.com/showthread.php?t=2183269
Click to expand...
Click to collapse
Okay.
the title would sum it up guys!. its a falcon! i have twrp installed, but even when i go to recovery it reboot before i can do anything! help please guys! when i go into fastboot mode (i think its called fastboot, idk i am a noob, by pressing power and volume down key) , all options are visible and its stable, i.e it does not reboot! however if i go to recovery, it starts rebooting! usb debugging is disabled! idk what to do! is there any way i can enable usb debugging via fastboot? help please!
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Saadjamil36 said:
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Click to expand...
Click to collapse
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Tried to reflash twrp?
Debanka said:
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Click to expand...
Click to collapse
Hey, thank you the problem was solved but then I installed CyanogenMod 13.0 on my moto g. After a day of use the phone automatically stopped working and i restarted it. Didnt display screen after CyanogenMod animation. I booted into TWRP recovery, was backing up data into a usb otg when the backup failed and the phone rebooted itself. Now it doesnt even display the CyanogenMod startup animation. I tried to enter twrp recovery again. It shows the main blue screen with twrp written on it but doesnt proceed further instead it restarts. I tried flashing twrp recovery again but the same problem persists. please help me out
Try flashing stock ROM, then again TWRP and CM13 via TWRP. I suggest this version of TWRP (NOTHEME version!).
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
Hello,
I had some issues in phone and had to wipe all the data in it (from recovery mode) with the thought of flashing the firmware after cleanup. The only way i know to flash this firmware is by SP flash tool and here's the issue!! the phone wont connect to the pc in switch off mode which is a need of the process. I've gone through a lot of forums on different websites including this (I asked for the issue on forum but didnt get any help), a lot of forums start from after the mt65xx preloader shows in the device manager.
The things i've tried are deleting the drivers of MTK device(The only thing available related to this phone) from my pc with the help of USB Deview , Tried pressing volume up button while connecting the phone(Without battery) to pc and even inserting the battery just after connection.
Any help would be grateful..Thanks!!
P.s- Unfortunately usb debugging is off in the phone
Sp5297 said:
Hello,
I had some issues in phone and had to wipe all the data in it (from recovery mode) with the thought of flashing the firmware after cleanup. The only way i know to flash this firmware is by SP flash tool and here's the issue!! the phone wont connect to the pc in switch off mode which is a need of the process. I've gone through a lot of forums on different websites including this (I asked for the issue on forum but didnt get any help), a lot of forums start from after the mt65xx preloader shows in the device manager.
The things i've tried are deleting the drivers of MTK device(The only thing available related to this phone) from my pc with the help of USB Deview , Tried pressing volume up button while connecting the phone(Without battery) to pc and even inserting the battery just after connection.
Any help would be grateful..Thanks!!
P.s- Unfortunately usb debugging is off in the phone
Click to expand...
Click to collapse
Hi, is your device completely dead? Or it boots?
If your device's is alive, get sprout4 Stock Rom and flash it via custom recovery like Philz or TWRP!
sachin n said:
Hi, is your device completely dead? Or it boots?
If your device's is alive, get sprout4 Stock Rom and flash it via custom recovery like Philz or TWRP!
Click to expand...
Click to collapse
Hello, thanks for the support
The phone boots and get into a bootloop, as i mentioned that i wiped the data out, and i can enter in recovery mode but not in fastboot (maybe coz usb debugging is off).
I had no idea about sprout4 and that android one devices have common ROM and recoveries !!!!
I have found my device listed on this page but how do i flash recovery in my phone? The way i know is through ADB and that wont work.
I would like to know if theres any other way to do it .
Thanks!!
Sp5297 said:
Hello, thanks for the support
The phone boots and get into a bootloop, as i mentioned that i wiped the data out, and i can enter in recovery mode but not in fastboot (maybe coz usb debugging is off).
I had no idea about sprout4 and that android one devices have common ROM and recoveries !!!!
I have found my device listed on this page but how do i flash recovery in my phone? The way i know is through ADB and that wont work.
I would like to know if theres any other way to do it .
Thanks!!
Click to expand...
Click to collapse
Oww, that's cool bruh.
Hang on, I'll link you a Sprout4 Full stock ROM [latest one]
All you need to do is, just enter into recovery mode then wipe everything except micro SD, flash the given Rom zip, give few minutes, once the Flashing done, reboot!
Edit - Rom Link - https://www.androidfilehost.com/?fid=24686681827315150
*.Note that, all the sprout4 roms compatible with each other, so just download the zip, put it to your SD, reboot recovery, wipe all [Wipe system, data. except SD card ], flash that zip, reboot!
No need for ADB stuffs.
sachin n said:
*.Note that, all the sprout4 roms compatible with each other, so just download the zip, put it to your SD, reboot recovery, wipe all [Wipe system, data. except SD card ], flash that zip, reboot!
Click to expand...
Click to collapse
urgh... Stock recovery doesnt show 'install from sd card'. The only options visible are apply update from sdcard , ..from adb, wipe data/factory reset, wipe cache.
thanks!
Sp5297 said:
urgh... Stock recovery doesnt show 'install from sd card'. The only options visible are apply update from sdcard , ..from adb, wipe data/factory reset, wipe cache.
thanks!
Click to expand...
Click to collapse
Lolwut? :/
You were on stock recovery!!!
Deym, I thought you were on Custom Recovery like Philz or TWRP!
So now, @Sp5297... Your device is just bootlooping? And before this had took place, you were on stock Rom right? What was the build number?
sachin n said:
Deym, I thought you were on Custom Recovery like Philz or TWRP!
Click to expand...
Click to collapse
Oops, i thought i asked for how to flash em!!
Well, whats next now!!
Sp5297 said:
Oops, i thought i asked for how to flash em!!
Well, whats next now!!
Click to expand...
Click to collapse
Err... I misread that, pardon me.
AFAIK, if you wipe data / factory reset from stock recovery, then that's not at all an issue, just reboot the device that's gonna work.
You can't i guess, fastboot / ADB modes requires theyve to enabled from settings /developer option. So it was looping / you can't do that either.
First tell me what build you were on before this took place.
Flashing the very next OTA[prior to that] via stock recovery will works sometimes.
@saichin n I have the same problem with my phone, I tried to use sp frashtool but as sp5297 the phone doesn't connect with the pc (it connects only when i do apply update from ADB). When i plug in the pc without battery it's just dead. My mobile is Karbonn Sparkle V
Edit: It started to bootloop me when i tried to start a game (soccer stars official). When i start it it just crashed the UI and i restarted it via power button
Hi bro. I have the same prob with my Karbonn Sparkle v (Not rooted) with 6.0.1/MOB31E
Hi bro. I have the same prob with my Karbonn Sparkle v (Not rooted) with 6.0.1/MOB31E . I am stuck at bootloop too and cant flash any roms as it errors that earlier version can not be flashed or so. I am not able to connect my fone to PC as well, its not detecting, Can I flash anything from SD Card ( as in recovery it gives option to update from Sd Card). I have tried factory reset, cache cleaning but nothing wokred. could you please advise me on this??? appologise, not sure where to write my query, as i just joined today.
hi, i wanted to change my xperia l rom for fun, but when i flashed twrp (graphical bugs) and the phone stopped going into fastboot or flashmod, then i just tought to myself (ohh, i ****ed up) then i flashed a even older version on twrp from twrp, and guess what?? its even worse... twrp doesnt even boot, my phone is in something like a twrp loop...
like this:
https://www.youtube.com/watch?v=Kr46ugrpL6U
i think im stuck at this point...
ps: the phone is recognized by adb and it shows up as in recovery mode, but thats it...
plz help me!!!
Turn off your phone.make sure you have more 50% battery.flash last firmware in flashtool..
rubengamerpt said:
hi, i wanted to change my xperia l rom for fun, but when i flashed twrp (graphical bugs) and the phone stopped going into fastboot or flashmod, then i just tought to myself (ohh, i ****ed up) then i flashed a even older version on twrp from twrp, and guess what?? its even worse... twrp doesnt even boot, my phone is in something like a twrp loop...
like this:
https://www.youtube.com/watch?v=Kr46ugrpL6U
i think im stuck at this point...
ps: the phone is recognized by adb and it shows up as in recovery mode, but thats it...
plz help me!!!
Click to expand...
Click to collapse
the twrp 3.02 or something has issue the screen flickers ..but you need to be patient and slowly install ROM :silly:
Hipom said:
Turn off your phone.make sure you have more 50% battery.flash last firmware in flashtool..
Click to expand...
Click to collapse
hi, but i cant flash with flashtool, because i cant connect phone to flashmode (i think i flashed twrp to the boot folder or something, i think i killed the phone at this point .-. )
rubengamerpt said:
hi, but i cant flash with flashtool, because i cant connect phone to flashmode (i think i flashed twrp to the boot folder or something, i think i killed the phone at this point .-. )
Click to expand...
Click to collapse
Keep the phone off then.Up to this step nr 3
You got it work??
Check Agent Fabulous's AOSP Nougat ROM thread.He has given instructions regarding TWRP.It solved the flickering issue.
No need to panic
rubengamerpt said:
hi, i wanted to change my xperia l rom for fun, but when i flashed twrp (graphical bugs) and the phone stopped going into fastboot or flashmod, then i just tought to myself (ohh, i ****ed up) then i flashed a even older version on twrp from twrp, and guess what?? its even worse... twrp doesnt even boot, my phone is in something like a twrp loop...
like this:
https://www.youtube.com/watch?v=Kr46ugrpL6U
i think im stuck at this point...
ps: the phone is recognized by adb and it shows up as in recovery mode, but thats it...
plz help me!!!
Click to expand...
Click to collapse
You dont have to panic. Since you can enter into fastboot mode by holding " vol- and power button " , you can flash latest TWRP recovery version 3.2 which is flicker free. Once you are done with it , try to flash a new rom with clean install. If that doesnt work , connect your mobile to pc in fastboot mode and open flashtool and select LOCK THE BOOTLOADER assuming you have already unlocked it. If your bootloader is locked , you can easily restore your device using SONY COMPANION. Its really easy. Let me know if this helps!!!
but it doesnt enter in fastboot mode, thats the problem xD
rubengamerpt said:
but it doesnt enter in fastboot mode, thats the problem xD
Click to expand...
Click to collapse
Can you explain in more detail?
Devansh Bhinde said:
Can you explain in more detail?
Click to expand...
Click to collapse
well, i flashed twrp into the boot folder or something, i dont remember and already took it as a loss...
but the phone doesnt enter into flash mode or anything, the only thing it does is bootlooping on the twrp boot screen