hey guys . i own a sparkle v , running on marshmallow ( last updated a week ago, smth like, 1,8mb) ... but i`m experiencing huge battery drain ... anyone know what to do ? i kinda like marshmallow more than lollipop, but there is any solution for keeping it ? like a better life battery kernel or smth .. . or just downgrade to 5.1.1 ? 10x in advance
Well I have a solution for you, Use Cody Kernel.
You have to unlock your bootloader and use TWRP Recovery (Recommend)
http://forum.xda-developers.com/showthread.php?t=3128888 kernel ? link
DeepSahota said:
Well I have a solution for you, Use Cody Kernel.
You have to unlock your bootloader and use TWRP Recovery (Recommend)
http://forum.xda-developers.com/showthread.php?t=3128888 kernel link
Click to expand...
Click to collapse
10x, i will try it, but before, anyone did this ? and it realy works , or do any difference ?
DeepSahota said:
Well I have a solution for you, Use Cody Kernel.
You have to unlock your bootloader and use TWRP Recovery (Recommend)
http://forum.xda-developers.com/showthread.php?t=3128888 kernel link
Click to expand...
Click to collapse
if i unlock bootloader, can`t i just flash that kernel using the recovery that phone already has ?
No you you have to flash custom recovery (twrp recommended) and Try it and you'll know the difference
even philz touch recovery or cwm recovery works fine
I installed custom recovery on the Nvidia Shield Tablet K1 (TWRP) and can't boot into recovery or install updates. Any suggestions?
Which version of TWRP? And which version of Android? The bootloader differs between Android 5 and 6. Twrp versions need matching bootloaders
I have the same problem on my k1(android 6). I already tried to flash an other recovery but i can't find a working one. Even the original recovery (downloaded from nvidia's site) doesn't work.
evanw68 said:
I installed custom recovery on the Nvidia Shield Tablet K1 (TWRP) and can't boot into recovery or install updates. Any suggestions?
Click to expand...
Click to collapse
if you're on MM, you need the Experimental 2.8.7.1 by Steel01 or unofficial 3.0.0-0 by Romracer.
The official TWRP does not work with the new MM Bootloader
prulleman said:
Which version of TWRP? And which version of Android? The bootloader differs between Android 5 and 6. Twrp versions need matching bootloaders
Click to expand...
Click to collapse
It's Android Marshmallow 6.0
drewski_1 said:
if you're on MM, you need the Experimental 2.8.7.1 by Steel01 or unofficial 3.0.0-0 by Romracer.
The official TWRP does not work with the new MM Bootloader
Click to expand...
Click to collapse
Will that work even with the K1?
unofficial 3.0.0-0 by Romracer works for me
evanw68 said:
Will that work even with the K1?
Click to expand...
Click to collapse
I installed TWRP. It was supposed to be TWRP 2.8.6.0, but it is 2.8.5.0. Today, I just backed up my tablet with it. After using TWRP, my tablet boots up 6 times faster and the UI functions twice as fast as it did before. Overall, my tablet got better after running TWRP. So, what did it do? Also, I want to flash Lollipop. Can I do that with this version?
I don't know what twrp did to your tablet. If you want to flash a lollipop or a marshmallow rom however you should use this version of twrp : http://forum.xda-developers.com/gal...overy-team-win-recovery-project-twrp-t3464050
And use one of theses rom :
lollipop : http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-12-cm12-t2997934
Marshmallow (recommended) : http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
Ka-B00M said:
I installed TWRP. It was supposed to be TWRP 2.8.6.0, but it is 2.8.5.0. Today, I just backed up my tablet with it. After using TWRP, my tablet boots up 6 times faster and the UI functions twice as fast as it did before. Overall, my tablet got better after running TWRP. So, what did it do? Also, I want to flash Lollipop. Can I do that with this version?
Click to expand...
Click to collapse
twrp manage all general functions before the android system completely started. you can compare twrp with the bios system on your pc.
if you want install the latest roms, you should upgrade your twrp to the latest unofficial common version (3.0.2-6). you can find it here: http://andi34.github.io/recoveries_tab2.html
smart-t78 said:
twrp manage all general functions before the android system completely started. you can compare twrp with the bios system on your pc.
if you want install the latest roms, you should upgrade your twrp to the latest unofficial common version (3.0.2-6). you can find it here: http://andi34.github.io/recoveries_tab2.html
Click to expand...
Click to collapse
Can I flash the linked recovery using the recovery I already have? If not, how can i do it? I do not have a PC, BTW.
Ka-B00M said:
Can I flash the linked recovery using the recovery I already have? If not, how can i do it? I do not have a PC, BTW.
Click to expand...
Click to collapse
yes, you can install the new version with your current twrp.
smart-t78 said:
yes, you can install the new version with your current twrp.
Click to expand...
Click to collapse
Awesome.
It's official, my device will be upgraded. May the force be with us all!
For example, I can't install this ROM. https://androidfilehost.com/?fid=529141701856461698
When I install this ROM, the system doesn't boot
But I can install this ROM. https://androidfilehost.com/?fid=95916177934523996
So what's the problem?
dogukans3131 said:
For example, I can't install this ROM. https://androidfilehost.com/?fid=529141701856461698
When I install this ROM, the system doesn't boot
But I can install this ROM. https://androidfilehost.com/?fid=95916177934523996
So what's the problem?
Click to expand...
Click to collapse
which version of twrp are you running?
smart-t78 said:
which version of twrp are you running?
Click to expand...
Click to collapse
I don't use twrp.I'm using PhilZ Touch Recovery 6.59.2
dogukans3131 said:
I don't use twrp.I'm using PhilZ Touch Recovery 6.59.2
Click to expand...
Click to collapse
and thats the cause of your problem. philz touch recovery is out of date and cant handle unified espressowifi builds. if you want to use the latest roms, update to the latest common twrp by android-andi
smart-t78 said:
and thats the cause of your problem. philz touch recovery is out of date and cant handle unified espressowifi builds. if you want to use the latest roms, update to the latest common twrp by android-andi
Click to expand...
Click to collapse
the same problem was repeated for recovery.When I flash this recovery,it doesn't boot https://androidfilehost.com/?fid=673368273298980762
( I flash it using TWRP 3.0.0-0)
But when ı flash TWRP 3.0.0-0 for P5110( https://androidfilehost.com/?fid=24407100847293583 )It works perfectly
dogukans3131 said:
the same problem was repeated for recovery.When I flash this recovery,it doesn't boot https://androidfilehost.com/?fid=673368273298980762
( I flash it using TWRP 3.0.0-0)
But when ı flash TWRP 3.0.0-0 for P5110( https://androidfilehost.com/?fid=24407100847293583 )It works perfectly
Click to expand...
Click to collapse
which rom do you want to install?
when you run a unified common twrp, you cant install older device specific roms. if you run an older device specific twrp, you cant install newer unified roms.
smart-t78 said:
which rom do you want to install?
when you run a unified common twrp, you cant install older device specific roms. if you run an older device specific twrp, you cant install newer unified roms.
Click to expand...
Click to collapse
I want to install newer unified ROMs, but I can't install anything for Unified , I can only install device specific ROM and TWRP
If I install anything for "Unified espresso" (ROM, TWRP, Kernel etc.), the system will not boot, but if I install anything for device specific, the system will boot successfully
dogukans3131 said:
I want to install newer unified ROMs, but I can't install anything for Unified , I can only install device specific ROM and TWRP
If I install anything for "Unified espresso" (ROM, TWRP, Kernel etc.), the system will not boot, but if I install anything for device specific, the system will boot successfully
Click to expand...
Click to collapse
so what was the last installed samsung stock rom? 4.2.2 or 4.0.4?
smart-t78 said:
so what was the last installed samsung stock rom? 4.2.2 or 4.0.4?
Click to expand...
Click to collapse
4.2.2
dogukans3131 said:
4.2.2
Click to expand...
Click to collapse
ok.
next case is there replaced hardware in your tab (e.g mainboard, display)? you need a special kernel then. look here https://forum.xda-developers.com/ga...nified/kernel-anykernel-t3484739/post74352635
smart-t78 said:
ok.
next case is there replaced hardware in your tab (e.g mainboard, display)? you need a special kernel then. look here https://forum.xda-developers.com/ga...nified/kernel-anykernel-t3484739/post74352635
Click to expand...
Click to collapse
No
dogukans3131 said:
No
Click to expand...
Click to collapse
are you sure. maybe its a refurbished tab. try it out. install common twrp + unified rom + special kernel for your device
smart-t78 said:
are you sure. maybe its a refurbished tab. try it out. install common twrp + rom + special kernel for your device
Click to expand...
Click to collapse
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)
dogukans3131 said:
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)
Click to expand...
Click to collapse
backup your current system. after that try a marshmallow rom (e.g lineage 13). only to be sure
dogukans3131 said:
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)
Click to expand...
Click to collapse
no, this kernel isnt compatible with kitkat.
smart-t78 said:
no, this kernel isnt compatible with kitkat.
Click to expand...
Click to collapse
I just downloaded Cyanogenmod 13 (device specific). Does this kernel work with device-specific ROMs? If it works, I'll try to flash the latest Unified TWRP first. If it works, I'll install the Unified ROMs.
The second question is, can I install cm 13 without factory reset(on CM 11)
dogukans3131 said:
I just downloaded Cyanogenmod 13 (device specific). Does this kernel work with device-specific ROMs? If it works, I'll try to flash the latest Unified TWRP first. If it works, I'll install the Unified ROMs.
The second question is, can I install cm 13 without factory reset(on CM 11)
Click to expand...
Click to collapse
1. i think there is no need for the special kernel on device specific roms. keep in mind that device specific builds wont be supported and wont get updates amymore.
2. no, you cant upgrade from cm11 to cm13 without factory reset. clean install is needed
smart-t78 said:
1. i think there is no need for the special kernel on device specific roms. keep in mind that device specific builds wont be supported and wont get updates amymore.
2. no, you cant upgrade from cm11 to cm13 without factory reset. clean install is needed
Click to expand...
Click to collapse
No, I want to install this kernel because I want to install Unified TWRP. If it works, then install Unified ROM
dogukans3131 said:
No, I want to install this kernel because I want to install Unified TWRP. If it works, then install Unified ROM
Click to expand...
Click to collapse
You can install unified twrp (or any other version of twrp) without installing the kernel. The rom and the kernel you have installed are completely independent of the twrp recovery. If you want to install a unified rom with a custom kernel you must first install unified twrp, then clean flash the rom and after that flash the kernel.
john99ap said:
You can install unified twrp (or any other version of twrp) without installing the kernel. The rom and the kernel you have installed are completely independent of the twrp recovery. If you want to install a unified rom with a custom kernel you must first install unified twrp, then clean flash the rom and after that flash the kernel.
Click to expand...
Click to collapse
Unfortunately, I can't enter the recovery mode when I flash Unified TWRP (after the Samsung Galaxy Tab 2 logo, the screen goes black and remains until I restart the system). I can only enter the recovery mode when I flash device specific TWRP
I flashed the firmware and update but after that the touch screen in twrp is unresponsive. Sometimes it works to push buttons but swiping to confirm an install (like magisk) doesvdefinitely not work. Same issue after reflash to official recoverey (3.2.3.0)
What can I do?
onkeljoe said:
I flashed the firmware and update but after that the touch screen in twrp is unresponsive. Sometimes it works to push buttons but swiping to confirm an install (like magisk) doesvdefinitely not work. Same issue after reflash to official recoverey (3.2.3.0)
What can I do?
Click to expand...
Click to collapse
Latest MIUI Roms (Developer ROM) with Android Pie has huge issues with touch screen and TWRP.
Already Reported here in XDA-Developers
Regards,
fbirraque said:
Latest MIUI Roms (Developer ROM) with Android Pie has huge issues with touch screen and TWRP.
Already Reported here in XDA-Developers
Regards,
Click to expand...
Click to collapse
Thank you for that info. Do you know how to rollback without using Windows and weird miui tools? Is it possible to flash back to stock recovery without touching Rom?
Cheers
You can rollback to latest stock Stable ROM flashing with Mi Flash Tool.