Database Info

problem in bluetooth

i have a major probleam with the bluetooth of my lg optimus 3d . in start they work all right , then after i put the KING 3D ROM v2.3 , by this forum . after i few days i try to reinstal the buckup , but with no succes , so i used the program of lg to reinstal it , with succes in this time . and here is the probleam , whean i try to turn on the bluetooth , they seems to loading in start , and then they are off , absolutly nothink . i reinstal the rom from lg twice , but the same , iven and with the update the bluetooth do the same , and with this i mean nothink . can you help me to find a solution , because i dont want to send it in the service before im sure that i cant found a solution . and i dont want to send it because , the previus and first time , they had stamp the leter "E" in the up of the screen , but from my luck i had put a plastick screen protection before .

My brother got the same problem with his o3d. His smartphone is a german branded vodafone version, but i debranded it with the stock 2.3.5 fw. Since then when he pushes the bluetooth button the o3d freezes and after a few seconds everything is allright except the bluetooth is not turned on. I tried to solve the problem with a reflash but its still there. A solution would be nice

thanks for the not help of all of you . i know that you have biger probleams than mine , but at least say somethink like , i dont know , or at least i dont care .

i have a major probleam with the bluetooth of my lg optimus 3d . in start they work all right , then after i put the KING 3D ROM v2.3 , by this forum . after i few days i try to reinstal the buckup , but with no succes , so i used the program of lg to reinstal it , with succes in this time . and here is the probleam , whean i try to turn on the bluetooth , they seems to loading in start , and then they are off , absolutly nothink . i reinstal the rom from lg twice , but the same , iven and with the update the bluetooth do the same , and with this i mean nothink . can you help me to find a solution , because i dont want to send it in the service before im sure that i cant found a solution . and i dont want to send it because , the previus and first time , they had stamp the leter "E" in the up of the screen , but from my luck i had put a plastick screen protection before .
Click to expand...
Click to collapse
does it works when go back to stock rom

i tried to return to stock rom , as also and in the last update , but always the same . right now i had send my divece to service , as none can healp me .

[Q] P500 Stuck ~

Hi guys , Im new here , althought I've been searching around here for like 3 days , and .... I'll start from the beggining :
My friend gave me his P500 ,he got a new phone so ... It was completely new , with Android 2.2.1
I just downloaded some ROMs , installed 1 , didnt like it , 2 same ... and 3rd where everything started
I lost my IMEI in the 3rd , and I didnt make the backup (really dumbish) until there i was ok , because the phone had internet and such
But then i wanted to make calls n sht, And I started searching solutions , found like , 2 , baseband and the folder in root ..
No-one worked or seemed fine for me , but , then after trying a baseband , my phone got stuck in the emergency screen
Searched for more solutions ... found 2 , KDZ and LG Support ... tried both , and .... after trying KDZ it got stuck on Android Screen
Then i tried doing with LG Support ... the same thing happened , clearing things , im stuck on Android screen , and now im here to ask you guys
if theres any chance of my little beautiful staying alive with me ? e_e *Sorry 'bout my bad english*
*Update*
After letting it for hours on the Android screen , it turned off , and now when pressing the power button , LG screen appears and then the phone turn off..

Try to go in repairshop

optimusPRIME said:
Try to go in repairshop
Click to expand...
Click to collapse
Well . I'll try that too ... maybe theres some luck. Ty

DONE , Gosh! I found the problem!! !! If ANYONE WISH to know how to repair it ... Heres what i did
Downloaded the baseband for my fone V10E , installed with LGMDP
Worked like a charm!

Nakamachy said:
DONE , Gosh! I found the problem!! !! If ANYONE WISH to know how to repair it ... Heres what i did
Downloaded the baseband for my fone V10E , installed with LGMDP
Worked like a charm!
Click to expand...
Click to collapse
Good,you are lucky one

[Resolved] [Q] No SIM and IMEI is null

Hello ,
My brother screwed my SGS3 , he connected it to Galaxy Tab 2 , and the SGS3 just got frozen , restarted it and it stuck at boot , on logo
We could manage to turn it on , but , it says there's no SIM card & IMEI is null
I've read some of the threads here but all of them say
Either do a back up , or give it to customer service center
1st , I don't have a back up , and it's not my fault , cause my brother did it , I was sleeping and he did all the things
2nd , I'm living in the 3rd world and we don't have a customer service center here , here they just sell yo the phone , when yo go outta the store , then it's all your problem if anything happens to the phone
So , any ideas for what to do except what I've mentioned ???
BTW , I've read in a thread someone said restore the custom ROM or something from
sammobile.com/firmwares
and the one who posted the thread said he tried it but didn't work too.
So , if there's any way to do it , I'll really appreciate it , and thanx in advance.
********************************************************************************************************************************************
The problem is solved , for whoever got this problem
just download the custom ROM from
sammobile.com/firmwares
choose your country , and do it with ODIN 1.8
It's working for me ^_^

[Q] LG l4 ii bricked phone ...

Hello guys , yesterday i decided to install chainfire 3d on my phone , so i thought it could support android jelly bean version 4.1.2 but it did not , my phone got "bricked" , i can only access download mode ... So i decided to flash my phone with firmware i got from some website , everything worked fine i could connect my phone to pc , i used the LG FLASH TOOL to flash my phone , but when the S/W update got to 5% it just stopped , i have waited for couple of hours but no luck ... So guys if someone can tell me whats the problem with this ? How can i solve it ? I need help ! ... If you have other method to uninstall chainfire 3d please tell me ... I couldnt find the right subforum for this phone so sorry bout that ...

QH SUSB_Dload /Hardbrick Xperia Tx Recovery

Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
 @Antiga Prime & @Adrian DC any view .

srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.

@Antiga Prime
Reached to a level where S1 tool works but shows Unknown SIN version . snapshot attached and again stuck ,
thanks added for your quick response and related link .
what else can be done
Antiga Prime said:
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
Click to expand...
Click to collapse

srd34 said:
@Antiga Prime
tried using the steps shown except for opening the phone part for test point and got error attached .
Thanks for the link though . any other view ?
Click to expand...
Click to collapse
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.

@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Antiga Prime said:
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
Click to expand...
Click to collapse

srd34 said:
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Click to expand...
Click to collapse
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.

Thanks , but it seems this SIN file is also not compatible .
Seems the last resort is to reach service center .
Antiga Prime said:
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Click to expand...
Click to collapse

srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Hello. Have you find the decision about QH SUSB on TX?

No solution yet . The device still with me and gets blinked when connected with charger , however . No solution to recover from hard brick I believe . Service centre also of no help since this model was a limited edition one and they dont have in their SKU list to do anything . keeping as fancy paper weight