[Completed] [Q] Help Allwinnera13 HardBricked - XDA Assist

I was stuck in a boot loop some months ago.........
I flashed the tab with firmware from its official website but it was unsuccessful......
Then I flashed the stock firmware and now it wont turn up even after the flash turned out to be successful.
My tablet wont go to recovery mode, not show any battery sign when plugged and not boot up normally..........
I tried using pheonix card tool but it didn't work......
tablet also doen't show up as a storage device on computer......
HELP NEEDED
Any knowledge provided is appreciated
Thanks in advance

Hi
Thanks for writing to us at XDA Assist. If your device is indeed hard-bricked you'll need to take it to a repair centre to be inspected by a professional.

No response in two days, thread closed.

Related

[Completed] [Q] Phone Stuck at bootlogo.

hi,
I am using a micromax A117. I have changed my ROM a couple of times. couple days back I changed my ROM to MIUI Rom. but as I didn't like it much I tried to change the ROM and I was surprised to find that my phone would not start in recovery mode and would continue with regular boot. So i tried installing TWRP recover and after i selected the particular recovery image to be flashed and selected boot to recovery my phone gets hung at the boot logo. I even tried taking of the battery and on but it didn't help.
Then i thought of using ABD to reboot the bootloader but my PC wouldn't detect the phone. I am stuck with almost a dead phone now. Need help ASAp
:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. You might have to return your device to stock and start over. See this, http://forum.xda-developers.com/can.../stock-rom-tweaked-deodexed-micromax-t2647353. Also see this, http://forum.xda-developers.com/canvas-magnus. They are the experts on your device and can help with any further questions you have.
Thread closed.

[Completed] anybody with stock acer b1 a71 firmware

i bricked my acer b1 a71 when i installed twrp using twrp magic maker. it flashed successfully but when it rebooted it just showed acer logo and thats it. whenever i turn it off just the logo appears and then blank screen. tried to go to recovery but i was only able to go to the first step where you have three choices 1.to go to recovery 2.to fastboot and 3 clean(boot) and whenever i choose one it just shows acer and blank screen. tried to reset it with the pin button but still nothing. my pc doesn't recognize the tablet whenever i plugged it in so thats another problem. i"ve studied all the solutions but they all start with a stock rom and that's the thing i don't have. anybody out here cna help me iwill deeply appreciate. thank you very musch.
XDA Visitor said:
i bricked my acer b1 a71 when i installed twrp using twrp magic maker. it flashed successfully but when it rebooted it just showed acer logo and thats it. whenever i turn it off just the logo appears and then blank screen. tried to go to recovery but i was only able to go to the first step where you have three choices 1.to go to recovery 2.to fastboot and 3 clean(boot) and whenever i choose one it just shows acer and blank screen. tried to reset it with the pin button but still nothing. my pc doesn't recognize the tablet whenever i plugged it in so thats another problem. i"ve studied all the solutions but they all start with a stock rom and that's the thing i don't have. anybody out here cna help me iwill deeply appreciate. thank you very musch.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please create an XDA account and post your question here:
Android Q&A
There are no specific forums for your device on XDA but you will receive expert advice in the forum I linked you to.
Good luck and welcome to XDA!

[Completed] Zenfone 6 black screen after wrong flashing

Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!
Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist

[Completed] How to fix blocked boot recovery samsung?

Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
androcrazy24 said:
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
Click to expand...
Click to collapse
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
my phone is samsung galaxy s4 mini DUOS GT-I9192, OBVIOUSLY BY SAMSUNG..........
Kdio said:
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
androcrazy24 said:
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
Click to expand...
Click to collapse
Hi androcrazy24
Thank you for your answer
Our experts at the below forum should be able to help you. Please be welcome to ask in there.
Galaxy S 4 Mini Q&A, Help & Troubleshooting
Nice regards and good luck.
.

[Completed] Yureka Plus YU5510A bricked black screen no fast boot , not getting detected on pc.

so its like i was installing twrp boot loader with flashify application and it said success fully installed click yes to boot in to recovery and i pressed yes
and it started restarting and and finally got in to a boot loop ,
so i pressed the volume up button and plugged in to the PC. it got in to fast boot mode and then i flashed a cynogen rom and it got successfully installed and then it went off and wont turn on , its hard bricked now , no boot loader, no fast boot , not getting detected on pc.
I tried almost everything online downloaded all the firmware , rom , sp tools and all crap stuff , but nothing helped ,
then I went to Micromax service center and told then this phone isnt getting on , they said we can't do anything .
now my last hope is here
please help me this is my only phone ;(
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
The experts there may be able to help.
Register a XDA account in order to post and reply in the forums. Good luck.

Categories

Resources