I tried to flash cwm recovery through sp tools and after some time My xolo q1010i is not starting nor pc is recognizing it as a result i am not able to flash any rom . :crying:
kshubham506 said:
I tried to flash cwm recovery through sp tools and after some time My xolo q1010i is not starting nor pc is recognizing it as a result i am not able to flash any rom . :crying:
Click to expand...
Click to collapse
Does your phone response in any way?
LS.xD said:
Does your phone response in any way?
Click to expand...
Click to collapse
No nothing
Related
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Have u tried enter the emergency mode?
Sent from my WT19i using xda premium
ur phone has which cpu??? mence mtk or other??
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Do u have ur mobile model stock rom??
Sent from my Micromax A116 using xda premium
daviyankee said:
please help me to unbrick my xolo a500
it is in a soft brick and dont have cwm recovery installed
all stared when tried to install the driver of chainfire 3d
what can i do
Click to expand...
Click to collapse
Download Stock/ custom rom for XOLO A500 (Search In google or XDA )
Download CWM Recovery
Place Rom in memory card
Remove and install battery press vol up then press power key to get bootloader mode
flash this CWM recovery then flash rom through CWM
A500 Not booting
professor_proton said:
Its was foolish of you to install cf3D when its clearly says no ics support
Well you can flash cwm using fastboot method and flash your stock rom
sent from my super advanced mini fridge
Click to expand...
Click to collapse
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
sonujain10 said:
I installed auto swapper script from some post, and now my cell is not booting,
i have download stock rom but it does not have scatter.txt, i have SP flash tool and drives and all things.
even i have download blu dash4.0 but its not completing, error message update failed.
please help me to install stock rom please
i do not know how to flash with SP flash tool,
so please provide me steps
Click to expand...
Click to collapse
download cwm recovery from here https://www.dropbox.com/s/h3w1doejuh3ecq4/cwm_a500.img
flash using fastboot (bootloader)
reboot to recovery
cwm 6 will be there
flash stock rom
Xolo q500 softbricked
Can Anyone Help me. My Xolo Q500 is softbricked. It is niether booting normally nor booting to recovery menu. I have tried sp flash tools but the stock rom of my phone which i downloaded does not contain any scatter file, probably because it is a Qualcomm based device. Please help me..................
xolo q500 dead after formatted
sir please help me i do have the same problem
xolo q 500 i soft bricked using format while connect in the smart upgared tool
i tried to flash but its ask disk to be formatted i am unaware of it so i mistakenly formatted now the phone is not getting turn on
or in the recovery mode please help or tell me the procedure
Well, I have seen the guide to get cwm recovery on q700 but sp flash tool doesnt recognize my phone, it keeps on searching, please tell me soon as i am a noob.
akash7071 said:
Well, I have seen the guide to get cwm recovery on q700 but sp flash tool doesnt recognize my phone, it keeps on searching, please tell me soon as i am a noob.
Click to expand...
Click to collapse
switch off ur phone and connect to pc through usb
Swap internal sd with external on q700 check this
http://androidsingh.com/showthread.php?tid=183
Sent from my XOLO Q700 using Tapatalk 4
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,
ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below
non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
Hello My Q-3000 is getting stuck in the boot loop(XOLO Logo ) . Even though I am used Vol+ & power not getting recovery menu ,but odin with red triangle.Please help to solve this problem. I requesting experts to guide me to resolve this issue.
Use Sp flash tool to install stock ROM & u should check ultimate thread
Use Sp flash tool to install stock ROM & u should check ultimate thread
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
vmc809 said:
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
Click to expand...
Click to collapse
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
sachin.r.fulzele said:
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
Click to expand...
Click to collapse
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
No more suggestions, submit phone to Xolo care
Sent from my HM NOTE 1W_MIUI6_5.7.23
vmc809 said:
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
Click to expand...
Click to collapse
Have u followed the procedure mentioned in this post.
04 - Flashing stock ROM using SP flash tools
Unbricking guide.
If u did exactly same then the phone should boot normally.
Also check the battery charging, maybe its not sufficiently charged.
avi3230 said:
Have u followed the procedure mentioned in this post.
Click to expand...
Click to collapse
I've told him, the same earlier, but he replied that he had done it, still no success.
Sent from HM NOTE 1W_MIUI6_5.8.6
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
mujaid714 said:
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
Click to expand...
Click to collapse
It's because u should either install vcom drivers or cynus drivers for xolo q3000, availability of both causing the trouble.
Sent from HM NOTE 1W_MIUI6_5.8.6
Yeah you read it correct?. Its a TWRP for this outdated device. I've ported a TWRP? recovery for this phone when I saw so many people requested one in XDA threads.this recovery is able to flash any android version. In order to flash it just unzip the twrp.zip & download flashify on a rooted micromax a108 and select flash then select this recovery and reboot.
OR
Use sp flash tool to flash only the recovery
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
rishavsoni said:
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
Click to expand...
Click to collapse
Your device is bricked bro.
rishavsoni said:
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
Click to expand...
Click to collapse
Flash this recovery using sp flash tool...
Then flash some custom ROM on it..
Or if you want to stay on the stock ROM then download the stock ROM from https://firmwarefile.com/micromax-a108 and flash it using sp flash tool
prateek0005 said:
Flash this recovery using sp flash tool...
Then flash some custom ROM on it..
Or if you want to stay on the stock ROM then download the stock ROM from https://firmwarefile.com/micromax-a108 and flash it using sp flash tool
Click to expand...
Click to collapse
link for sp flash tool
rishavsoni said:
link for sp flash tool
Click to expand...
Click to collapse
Visit this site and download sp flash tool and the mediatech vcom drivers https://spflashtool.com/
phone is booting but it is not connecting to pc
rishavsoni said:
phone is booting but it is not connecting to pc
Click to expand...
Click to collapse
Have you tried these methods https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Check this website and reply.
prateek0005 said:
Have you tried these methods https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Check this website and reply.
Click to expand...
Click to collapse
tried no luck
rishavsoni said:
tried no luck
Click to expand...
Click to collapse
Can you access the recovery and if yes then have you tried clearing data