[Completed] [Q] thl 5000 flashed a rom and touch screen doesnt work - XDA Assist

Hello there
I have a thl 5000 and recently i tried to change to a custom rom. I wiped data, erased dalvic and nvram but in the end the rom couldnt install so I could no longer open my phone (since everything was deleted)
After that I downloaded the stock rom and flashed it in my mobile. It booted fine but since then my touch screen is ruined... I touch it and it reads the touch half screen away making it almost imposible to navigate through the phone.
I've tried a lot of things and im running out of ideas so anything would be welcome
Ps. i made a backup for my rom and nvram with mtkdroid but it doesnt work when i try to restore it. And also seems i cant root my phone something must be corupted in the su binaries... (wierd since I wiped everything)

Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything specifically about the problem you describe, but take a look at this thread:
THL 5000 OctaCore MTK6592T,ROOT,RECOVERY.
I'd suggest you ask your question there so it reaches other people who are experienced with your device.

Thread closed, thanks.

Related

please guys helppppp!!!!!!

hello!!!!i am really sorry to write here and not at lg gt 540 section but i really need a fast and reliable solution!as many answers are better.
8 hours ago me and my best friend (the owner of the gt540) had the idea to root his phone and install a custom rom.I have rooted my optimus2x several timesand i thought that it would be easier than it seemd to be.he'sphone had a factory problem.It couldn't connect to play store.so i downloaded the r4 and rooted he's phone.this is when the problems started.i installed clockworkmod but when i rebooted it booted normally.no clockworkmod recovery.so i followed some guides about have it done and finally i had to install an orange staf from france or england....(i do not remember).then i wiped data /factory reset and clear dalvik cashe and every rom i tried to install said fail status 7.i tried cyanogen , oxygen and more.now i can go cwm but when i let it boot normally it gets stuck at orange.please gime a solution cause tomorrow he is flying to Cyprus to college and he has to have at least a working phone there.uf anyone wants more than answer and can chat with me,i can tell you my Skype so that solution can be found much faster!!!thank you for your tine!!!!
wtf?????
well guys,i do not know what to say.....after several reboots it booted normally and unrooted.......i rooted the device from the start,all over and everything is ready....i do not know how it happened....

[Q] Help with a Freelande PH20 / MAPAN MX713

Hello, i know it's not great one of my 1° post be a cry for help, but i'm having way more trouble then i should with my father's PD20
well... lets me start, i was trying to root the tablet because... because i wanted, wen i was using Z4root (the last one) my tablet just reset after some little time, wen he boot again i notice the all my apps are gone and the tablet was on Chinese (or Korean) i tried save some new apps on the internal memory and the system just said the my tabled was full ( but wasnt).
I did a quick search on this forum and diagnosed as a rom problem, nothing rly serious if wasn't for the fact its almost impossible (at least for me) find the original room.
another search on the forum and i saw some people with a similar problem but different tablet model, they solve their problems installing a rom from a similar model. I tried several generic/similar roms and kinda worked, some of they are way to slow, another ones had some problems with the touch, but on my 14-16 attempt i installed this rom "MaPan_MX713_Android_4.0.4os_Firmware_20121028J" for MAPAN MX713 and the system worked a little bit slow and with a huge discrepancy on the touchscreen, but my problem was for some reason that uso modified my boot system not allowing anymore the backup mode, just that screen who has no options and that kinda broke my legs
i guess i will need a clockwork for one MAPAN MX713 to be able to keep trying find the rom but im almost lost, any help will be appreciated
if i buy another one (same model) can i recovery this one ??
Bumb/Update
I menage to install adb tolls and tried a couble recovery.img from clockworkMoD, no luck fom me
if anyone knows who i could install a decent Recovery mode i will be gratefull
if i buy another one (same model) can i recovery this one ?

[Resolved] [Q] Elephone P6000 unresponsive screen after Chinese fix

Hello all,
I would like to ask a question about a problem I encountered with my Elephone P6000. I’ve been reading and searching for similar situations and solutions for 3 straight days now, and my motivation as dropped to a minimum.
This week I got the P6000 from a friend, and it was running on the 8.3 stock-ROM from 26-12-2014. I read about a screen lag problem, and went on trying to fix it. I tried several methods, a app made by lidmiloff, a .bat file by the1024 (and zOrgent? Not sure..) and finally a Russian/Chinese application provided on 4PDA.
This last method had an effect, although it was not the effect I was expecting. When I tried to operate my phone after the application was done, the touchscreen had become unresponsive to my touches. The volume buttons, and power button still work and I can boot the phone as it would normally.
I’ve tried to flash several ROMs (using SP Flash tool) to repair the touchscreen: a stock-rom provided by Elephone, a stock-ROM provided by s7yler (from needrom) and a backup (20141228) rom provided by (the1024). Unfortunately, flashing another ROM does not fix the problem and I’m still stuck with an unresponsive touchscreen.
The plan I wanted to try next was to flash the 8.4 ROM from 31-01-2015 and after that try the .bat file by the1024 again. However, I’m not really sure anymore if it would help and if I can break the phone any more than that it already is. It seems that flashing a new ROM with SP Flash tool does not affect the change that was made by the Chinese application. Does anybody know why this is the case?
It would be great if you guys could give me your two cents on my problem. I’m stuck, and to be honest getting quite insecure about the whole thing.
Kind regards,
Tom
PS: I've asked this question in multiple (relevant) threads. I hope this is not a problem, please let me know if it is!

[Completed] [Q] need help note 3 (SM-N9005)

hi there,
i have a SM-9005( Australian Telstra) which i bought used a couple of weeks/ about a month ago. NOT KNOWING WHAT I WAS DOING i tried to install android 5.0 via odin but, the thing that i did'nt realise was that it was the hong kong firmware after installing it i encountered a problem something like " binary (number) < (number) i figured that it was because when i decided to install it the storage was about 95% full and it only had like 300mb left so i just went into recovery and restored the phone. after successfully installing 5.0 i noticed that the phone was starting to be glitchy as in system would'nt respond (lag) no sound and camera and mic and calling wouldn't work. so i decided it was best to just roll back to the old os 4.4.2 and thats what i did. after doing so i realised that the same problems were still there "no in/outgoing call, no sound, no Google Now, no S-Voice, no camera, slow lock screen and slow settings" after trying to research and not finding anything that would help me ( mainly as my phone is Australian variant) i decided to install a custom rom Cyanogenmod, although this fixed the camera the other problem were still there and after trying to even restore from a nandroid backup via twrp recovery the problem has still not been resolved and well....:crying:
Hi, thank you for using XDA assist. Start here, http://forum.xda-developers.com/showthread.php?t=2439633 Also see this which is your device specific forum, http://forum.xda-developers.com/galaxy-note-3
thanks, but?
jd1639 said:
Hi, thank you for using XDA assist. Start here, http://forum.xda-developers.com/showthread.php?t=2439633 Also see this which is your device specific forum, http://forum.xda-developers.com/galaxy-note-3
Click to expand...
Click to collapse
thanks, but i have no idea what to do with this information neither do i know what to call the problem (name for problem would be good). as for what phone model mine is, it is the same as the one in the link it is 32gb telstra aus vrs.
Thread closed.

[Completed] No sim card detected

micromax e311, 4.4 kitkat rooted and CWM philztouch 6.59
hi guys sorry for this new thread, i know there are other similar threads like this too but i know those posts wont help me coz i tried everything, so please dont shout at me, and in near future someone too will face problems like me and they may try to fix and nothing will work for them, so here it is.
last night i was trying many different custom roms like touchwiz, mangna, and others etc which made my phone bootloop many times, but that didnt worry me as coz i fixed that by flashing another rom but here the issue starts where my phone cannot detect sim card no more and it was in slot 2 as my sim slot 1 was broken many months ago, baseband and everything was unknown, i tried everything every imei changer app from playstore to factory reset, previously nandroid backup, stock rom flash, mtk engineering mode in cds information( now cds information also greyed out , no idea how). nothing worked!!! so i kindly request you Developers to help me out of this situation , any help will be appreciated
Snapshots attached.
N.B- I DONT HAVE PC ..
Russel Got stucked said:
micromax e311, 4.4 kitkat rooted and CWM philztouch 6.59
hi guys sorry for this new thread, i know there are other similar threads like this too but i know those posts wont help me coz i tried everything, so please dont shout at me, and in near future someone too will face problems like me and they may try to fix and nothing will work for them, so here it is.
last night i was trying many different custom roms like touchwiz, mangna, and others etc which made my phone bootloop many times, but that didnt worry me as coz i fixed that by flashing another rom but here the issue starts where my phone cannot detect sim card no more and it was in slot 2 as my sim slot 1 was broken many months ago, baseband and everything was unknown, i tried everything every imei changer app from playstore to factory reset, previously nandroid backup, stock rom flash, mtk engineering mode in cds information( now cds information also greyed out , no idea how). nothing worked!!! so i kindly request you Developers to help me out of this situation , any help will be appreciated
Snapshots attached.
N.B- I DONT HAVE PC ..
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
we actually don't do technical support, we're here to guide you to the most suitable board on xda, unfortunately the phone you're using has no specific device Forum, make sure you give proper information
https://forum.xda-developers.com/general/general/guide-how-to-question-t3464199
and ask here again
http://forum.xda-developers.com/android/help
My personal opinion is that you successfully damaged your efs / nvram partition with your flashing adventure, so a proper backup would be the best help, have you backed up this critical participation? On most mtk devices you can restore imei with engineer mode but you'll have to redo it every factory reset, unfortunately it seems you tried that already, if non of this works I would ask in the mentioned help section but it could also very likely be that your phones phone functionality can't be recovered anymore..
That's why first thing is always a proper backup of all critical partitions and efs / nvram is definitely one of the most important ones.. If you missed that a recovery method can't be guaranteed..
Good luck

Categories

Resources