Bought a 16gb nook tablet (BNTV250) and the touch screen doesn't work. Ok maybe sometimes in certain spots.
Anyway there is something very wrong with the touchscreen. When I bought it, it had stock B&N firmware in it.
Now my question is how do I know if the touchscreen controller chip is bad or if someone loaded CM into it a left
10 touch firmware in the in the touchscreen controller ?
If I install CM into this nook does the CM rom detect whether it has 10 touch or 2 touch firmware in it and go from there ??
So many noob questions sorry about that.
Related
Hi There!
I Have bought one "ching ling" Tablet. It uses processor Telechips of 1Ghz, have 512MB of RAM and 8GB TTF included. it have to some cool things, like hdmi out and 3g dongle support that works fine using a ZTE MF190.
My android in this tablet is v2.3.3 Gingerbread.
But I have a little problem.
I turn it on, I calibrate the touch screen (it's resistive), now everything is perfect, my touch are working good, but when I restart my tablet, i need to re-calibrate the touch screen. I've made a factory reset but this error persist.
anything erase the configuration.
How I can fix it? It's very boring.
PS: Sorry for my bad english.
Thanks for the help.
Hey guys, I need some major help...
So I was given a Impression i7 Tablet from Leader International.
I have done plenty of research on this tablet, and I do know that support is limited and problems are abundant. Here are some of the things I need help with or it if it to much trouble, I will just take it back.
When I load it, it load all the way up to the homescreen, but I have no touch screen function and the buttoms at the bottom do not light up. I have used the reset button multiple of times with no luck.
Then I have tried to install the Android Drivers Rev 4 but they seem to not install on my computer. (Windows 7)
Also has anyone been able to root this device.
I hope to get some answers. I dont want to take it back unless I have to. (I like to hack away at android devices)
Thanks Everyone!!
the tablet 7 inch have place to put sim card or only tablet 10.1 ?
the leader i7 is a rebrand of another tablet. Find that tablet and youll have your answer.
I have searched the forum and I didn't find anything relating to this specific pad and I apologize if this breaks forum rules to start this post.
I bought a Sanei N90 9.7" Cube tablet with android 4.0.3 and I installed the newest firmware upgrade. I am having an issue when the pad is in portrait mode the touch keys will not respond and in either mode, the screen seems to be off calibration. Is there a screen calibration tool for android 4.0.3 tablets or how do I access the screen calibration mode?
Also, are there custom rom's that can flashed to this pad? As long as the rom is for an android 4.0 tablet, can I flash this tablet with it?
Any help would be greatly appreciated. Thank you
Rocky21 said:
I have searched the forum and I didn't find anything relating to this specific pad and I apologize if this breaks forum rules to start this post.
I bought a Sanei N90 9.7" Cube tablet with android 4.0.3 and I installed the newest firmware upgrade.
Click to expand...
Click to collapse
Hi, I came across this tablet in a post at tabletrepublic.com/forum/android-tablet-reviews/jxd-s9000-first-impressions-will567-1331-2.html#post14214 (sorry cant post urls yet).
I do not know anything more about it but talk to McBub and see if it can use the same Roms as MOMO11 and the others discussed in that thread. Please post any reply you get here as I am interested too.
Apart from those issue, do you like the device? Build quality good?
BT works (BT is the reason I am considering it instead of a momo11)?
Another sanei n90 discussion: tabletrepublic.com/forum/android-tablet-reviews/sanei-n90-review-1385.html
Ps. It seems to be called Ampe A90 as well (sometimes sold with/without BT according to specs)
I got one of this from mcBub: performance are ok, but build quality is awful, the display has a bleeding light on the top (where is the camera), brightness float every time i touch it especially with white background, the frame isn't really on place. I'had support from mcBub, with their times (slowly) but they take care of my situation and send me a new firmware to solve the problem, now the brightness floating is barely visible for an half second after touching the touch and the tablet doesn't freeze anymore.
Color Problems
Hello,
Anybody a similar problem to this:
My tablet twist the grey color with blue, and the black color as red points...
Is this a firmware problem or hardware?
Thank You
RRS
Bought a nearly new galaxy tab2 from the internet, but the touchscreen seems not to be working.
Any idea what that can be. Could it be something with a ROM, or does it need to go to Samsung.
OOge said:
Bought a nearly new galaxy tab2 from the internet, but the touchscreen seems not to be working.
Any idea what that can be. Could it be something with a ROM, or does it need to go to Samsung.
Click to expand...
Click to collapse
It could be failed hardware, a bad cable, or perhaps a problem with the touchscreen controller chip.
If you can capture the boot messages using 'dmesg' over ADB, there may be info there that could help determine which.
If it's under warranty, return it to the seller for a refund or replacement, else just keep searching for a solution :\
OOge said:
Bought a nearly new galaxy tab2 from the internet, but the touchscreen seems not to be working.
Any idea what that can be. Could it be something with a ROM, or does it need to go to Samsung.
Click to expand...
Click to collapse
When you say the touchscreen "seems" to not be working, what exactly do you mean?
Does it not work AT ALL, or is it just not very responsive to your touch, i.e. scrolling is slow and choppy and/or pinch to zoom is flaky?
Because I have noticed certain apps do not work well on my 10.1 when it comes to the touchscreen, when the tablet is under heavy load. Are you experiencing this more with certain apps, like Chrome and/or Samsung Keyboard? If that's what is happening, I can help.
I use a custom firmware, so not possible to return to samsung.
As it is stuck on the install screen, I can't enable debug for ADB.
Or is it auto enabled on a custom rom.
What has the highest chance of failing. Logic board or digitizer (as the cable is not sold seperatly)
I have a Tab 2 P5110, I bought it as faulty as the touchscreen is not working. Otherwise it's alive and responding to the buttons.
After reading several topics it looks like it is a bug that can only be fixed by physically replacing the digitizer panel.
Of course I'd prefer a software solution but so far what I've found wouldn't work on this model due to HW difference.
Can someone confirm that?
Thanks.
DEAR Friends im looking for your us i looked everywhere and i could't find anything
Im looking to flash my phone which is Alcatel One Touch SCRIBE HD 8008X, i did something wrong and now my phone is like a stone no responsible for anything no any animation on the screen completely dead i can hear only the voice of the phone when im connecting to the laptop, i can't even go to recovery mode nothing at all
memory 4 Gb, slot microSD (TransFlash)
screen: 5", resolution: 720x1280
Bluetooth, Wi-Fi, 3G, GPS
camera 8 Mp, autofocus
smartphone, 4.1
the chipset is MT6589 i have tried already two device with the same chipset from Lenovo phones which was s950,s960 and i have some error that is not the right one,
hope some one will reply to me,
waiting your help guys