I decided to give the new CM9 rom a try this morning on my verizon s3. after playing around a little i decided that I liked the stock rooted rom I had before so I was going to return to my nandroid backup. However, CM9 has its own recovery. I flashed my other recover, which was InvisibleK's recovery, which actually boots into a stock rom from recovery but never really goes into the recovery menu. So now I am stuck bootlooping because I think the recovery is trying to boot up but isnt finding the rom becuase I couldnt flash it from the CWM rcover that I was on with CM9. I can get into download mode but of course Odin is not seeing my phone for some reason. Anyone out there have anysuggestions? or did I just make myself a fancy new paperweight?
got odin
i got to odin now. i recognized my phone. I switched usb cords to the one that came with the phone
flashed stock rooted rom no luck
flashed stock rooted rom thought i was in the clear and now its bootlooping at the verizon boot animation. Im pretty sure i just have to factory reset but i cant get into recovery
kulahpac said:
flashed stock rooted rom thought i was in the clear and now its bootlooping at the verizon boot animation. Im pretty sure i just have to factory reset but i cant get into recovery
Click to expand...
Click to collapse
Revert to complete stock with no root, then try to access the samsung recovery and do a factory reset from there.
unrooting brought me back to stock recovery
I finally sbf'ed back to the stock rom and being unrooted must have not allowed the phone to use the recovery I had installed and instead took me to the stock recovery where i was able to factory reset and all is good now. Phew..... that was a close one
thanks skander
Thank you very much. I actually tried that last night. I was getting desperate. wasnt sure if it would work or not but I thought maybe that and if that didnt work i would try flashing a different recovery from adb but i can never get adb to work from my pc. Anyway though, didnt matter. its all good now. Just got root back and learned a valuable lesson. thanks again....
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
rrhutch said:
I received notice this morning that a firmware update was ready to install. I chose to install it and the tablet rebooted and start to apply the update. However, it gets to 32% on the update install, stalls, and then reboots and does the exact same thing.
Any thoughts on a solution?
Click to expand...
Click to collapse
i have the same problm :crying:
Need more info than that.
For example... Are you rooted or stock?
If rooted, there are a couple of reasons off hand I can think of you could be having a problem.
If you're stock, well... All I can think of is wave your hands in the air, and wave them like you just don't care. Pretty sure that won't fix the problem though, but if it does, report back! xD
I'm rooted.
Sent from my DROID RAZR using xda app-developers app
exactly the same problem
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
I'm in the same situation.
I'm going to try http://forum.xda-developers.com/showthread.php?t=1849994
when I get home tonight to see if this fixes it.
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
ytdong said:
Is there any way I can at least access the internal storage somehow and copy my data?
There are some important job application info in S Note..
Click to expand...
Click to collapse
you should've sync your snote data with drive or dropbox!!! any firmware update 101 is to back up all your data
ytdong said:
I have the exact same problem.
GT-N8013, rooted, stock rom with root injected.
I called Samsung tech service and they said I should send my device to them.
The only way I can get out of this "update->reboot->update->reboot->..." infinite loop is to get into ODIN mode. (I can't turn off the device)
I decided to re-flash my rom (stock rom with root injected) in ODIN mode, but it does not have any effect and the device is still on this infinite loop. I'm worried if I messed up the device even more by doing that.
Click to expand...
Click to collapse
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Thank you! but I've been on stock recovery so I never flashed cwm or made a cwm backup. How can I restore to a backup after I flash the cwm recovery?
Nefariouss said:
Try using Odin to flash the high on android cwm recovery. Once I did that I could restore a backup and boot to android.
Click to expand...
Click to collapse
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
khanh1289 said:
if you've never flash CWM, that means you never backed up via CWM, which means you can't restore to a back up. You have to use ODIN and flash a stock firmware on your note to recover it
Click to expand...
Click to collapse
ytdong said:
Yes I'm trying to find a stock firmware for N8013 (UEALGB) but no luck. There is only "root injected" stock firmware, which is causing the problem right now...
Has anyone resolved this problem?
Click to expand...
Click to collapse
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
This worked for me as well. Thanks a lot, Vincent9756!:good:
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Vincent9756 said:
I have a N8013 and was running the stock, root injected firmware (UEALGB). Today I got the update notification. I tried to install and it kept looping. This is what I did:
1. Flashed the stock firmware with ODIN. You'll find the stock firmware here:
http://forum.xda-developers.com/showthread.php?t=1847706
2. When my tab rebooted, I got another update notification. I installed it and it worked. I'm now running UEALI3.
I didn't lose any data. I just lost root.
Click to expand...
Click to collapse
Worked for me. Thanks!
rrhutch said:
Worked for me. Thanks!
Click to expand...
Click to collapse
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Kikoshi said:
What if i didn't do Root Injected, but the Second Method of Flashing the Root.zip with CWM? which recovery do i download and flash in odin?
would that work?
Click to expand...
Click to collapse
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Z a p i x said:
Flash the recovery version for your firmware. If you have stock, flash the GB recovery. If you have LH2, flash that.
If you want to save root, use OTA RootKeeper before doing anything.
Click to expand...
Click to collapse
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Kikoshi said:
Im sorry but what do you mean GB Aaah that was the primary stock recovery before i updated to LH2 lol, now i get it.?The one that i have is the CWM HighonAndroid which was used for the Method 2 to obtain root, so then i jus tdownoad the stock LH2 Recovery, and use OTA rootkeeper before Odin LH2 Stock Recovery right? Will there also be a stock kernel and recovery for UEALI3 ? was thinking of possibly using the Triangle Away after this, possibly might be needed. Though maybe not.
Just want to make sure that everything is normal after this lol
ok... giving it a shot now, and using the OTA RootKeeper, lets see if this works
Everything Got updated !!! OTA seems to have worked which was awesome.
Testing everything to make sure that Root is fully funtional .
Used RootChecker, and things seems fully working!
Thank you loads for the help!
Click to expand...
Click to collapse
Yeah, there will most certainly be kernel and recovery uploads.
the only issue you might run into is CWM not sticking. If it doesn't reflash CWM in ODIN with reboot unchecked. Then after you flash it, boot into CWM. When you select reboot, it should offer to prevent stock recovery from replacing it.
and you're welcome, glad to help
Guys u might think this is a dumb question but how do i flash stock recovery with odin like were do insert the file i know how tp put in dl mode and get my comp to see my tab in odin and i did flash the prerooted injected stock uealgb recovery to get root i just dont know were to put the files in odin some help would be greatly appreciated, cause i need to flash this first before i do the ota update correct ? If not i will bootloop ? So rootkeeper alows me to keep root acess after ota? Thanks guys
Sent from my GT-N8013 using xda app-developers app / jelly powered samsung infuse 4g
So here is my problem. I was rooted on JB,and getting propmts to update to KK. After some research I found out that is it now rootable/unlockable, so I downloaded the .183 update and used RSD Lite to get on the update. That went well. Used towelroot and motoapocalypse to get rooted and unlocked. Also went well. Used Flashify to install TWRP. Well again. Heres where things fell apart. I booted into recovery to backup my stock ROM. After I did that I moved the backup to my SD card like an idiot not knowing it couldn't be restored from there. So I downloaded Validus 5.2 and Gapps. When I flashed them I was stuck in a boot loop on start up. Power down and tried again, still looping. Fastbooted to Recovery to restore my backup, but it was not there cuz it was only reading from internal storage (oops). So I was screwed. Then I read that CM had updated the modem or something and that you had to update stuff to use it. Still not sure about all that, but anyway. I thought maybe that was the problem, so I downloaded an older version of CarbonROM from June that was before the CM changes thinking I would be good now, but when I flashed it the same thing happened. Boot loop. So I went back into fastboot and flashed the RSD Lite stuff again. Rooted with towelroot. Unlocked with motoapocalypse. Verified status code 3 in fastboot. Verified root with Root Checker. Installed Flashify, but I haven't installed a recovery yet. Was TWRP my problem? Why am I boot looping on custom ROMs? Can someone help me out, or point out something Ive missed here?
ilinimud said:
So here is my problem. I was rooted on JB,and getting propmts to update to KK. After some research I found out that is it now rootable/unlockable, so I downloaded the .183 update and used RSD Lite to get on the update. That went well. Used towelroot and motoapocalypse to get rooted and unlocked. Also went well. Used Flashify to install TWRP. Well again. Heres where things fell apart. I booted into recovery to backup my stock ROM. After I did that I moved the backup to my SD card like an idiot not knowing it couldn't be restored from there. So I downloaded Validus 5.2 and Gapps. When I flashed them I was stuck in a boot loop on start up. Power down and tried again, still looping. Fastbooted to Recovery to restore my backup, but it was not there cuz it was only reading from internal storage (oops). So I was screwed. Then I read that CM had updated the modem or something and that you had to update stuff to use it. Still not sure about all that, but anyway. I thought maybe that was the problem, so I downloaded an older version of CarbonROM from June that was before the CM changes thinking I would be good now, but when I flashed it the same thing happened. Boot loop. So I went back into fastboot and flashed the RSD Lite stuff again. Rooted with towelroot. Unlocked with motoapocalypse. Verified status code 3 in fastboot. Verified root with Root Checker. Installed Flashify, but I haven't installed a recovery yet. Was TWRP my problem? Why am I boot looping on custom ROMs? Can someone help me out, or point out something Ive missed here?
Click to expand...
Click to collapse
You have to ensure the ROM you are using is built for the KK kernel. Not all ROMs work with the KK kernel.
Here is a list of ROMs that work with KK:
http://www.droidrzr.com/index.php/topic/48909-kitkat-roms-list/
Anything else will result in what you are experiencing - bootloops.
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
ProSniper54 said:
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
Click to expand...
Click to collapse
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
NaminatoR1254jaime.sier said:
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
Click to expand...
Click to collapse
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
ProSniper54 said:
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
Click to expand...
Click to collapse
Probably because you have custom recovery still or you are rooted.
The android red guy happens bc you are rooted (it'll happen even if you have stock recovery).
To system update, you have to be without custom recovery AND unrooted.
EDIT: Im theoretically speaking. I am rooted, therefore, I dont update via OTA.
i tried to recover to factory but i am stuck at system.img which dun seem to be copying into my tablet i manage to flash twrp in and wat else can i do to make it working again?
thanks
While I was attempting to flash CM 13.1 to the phone, it got stuck in a bootloop. Would not get past the white startup/splash screen. So, I booted it into TWRP and attempted to install the recovery I had made using TWRP. It ended up throwing me an error (I don't remember the code.) Anyways, I got the bright idea to completely wipe my phone and retry it. Now TWRP deleted my recovery, and my OS is gone. It was rooted and had SuperSU installed before it got bricked. Any help at all?
Regards,
Cheer
Hi Cheerfulfilms
Next time when you brick your phone, read this thread. I hope you'll be good now.
Cheers
bemolx said:
Hi Cheerfulfilms
Next time when you brick your phone, read this thread. I hope you'll be good now.
Cheers
Click to expand...
Click to collapse
The Xtreme System ZIP is no longer available.
*update*
I decided to try my own way and it worked very well. Using TWRP I was able to transfer a ROM onto a MicroSD, and then install that ROM from TWRP. It's a lot less complicated than the thread given. The Xtreme stock ROM is running very well though.