So here is my problem. I was rooted on JB,and getting propmts to update to KK. After some research I found out that is it now rootable/unlockable, so I downloaded the .183 update and used RSD Lite to get on the update. That went well. Used towelroot and motoapocalypse to get rooted and unlocked. Also went well. Used Flashify to install TWRP. Well again. Heres where things fell apart. I booted into recovery to backup my stock ROM. After I did that I moved the backup to my SD card like an idiot not knowing it couldn't be restored from there. So I downloaded Validus 5.2 and Gapps. When I flashed them I was stuck in a boot loop on start up. Power down and tried again, still looping. Fastbooted to Recovery to restore my backup, but it was not there cuz it was only reading from internal storage (oops). So I was screwed. Then I read that CM had updated the modem or something and that you had to update stuff to use it. Still not sure about all that, but anyway. I thought maybe that was the problem, so I downloaded an older version of CarbonROM from June that was before the CM changes thinking I would be good now, but when I flashed it the same thing happened. Boot loop. So I went back into fastboot and flashed the RSD Lite stuff again. Rooted with towelroot. Unlocked with motoapocalypse. Verified status code 3 in fastboot. Verified root with Root Checker. Installed Flashify, but I haven't installed a recovery yet. Was TWRP my problem? Why am I boot looping on custom ROMs? Can someone help me out, or point out something Ive missed here?
ilinimud said:
So here is my problem. I was rooted on JB,and getting propmts to update to KK. After some research I found out that is it now rootable/unlockable, so I downloaded the .183 update and used RSD Lite to get on the update. That went well. Used towelroot and motoapocalypse to get rooted and unlocked. Also went well. Used Flashify to install TWRP. Well again. Heres where things fell apart. I booted into recovery to backup my stock ROM. After I did that I moved the backup to my SD card like an idiot not knowing it couldn't be restored from there. So I downloaded Validus 5.2 and Gapps. When I flashed them I was stuck in a boot loop on start up. Power down and tried again, still looping. Fastbooted to Recovery to restore my backup, but it was not there cuz it was only reading from internal storage (oops). So I was screwed. Then I read that CM had updated the modem or something and that you had to update stuff to use it. Still not sure about all that, but anyway. I thought maybe that was the problem, so I downloaded an older version of CarbonROM from June that was before the CM changes thinking I would be good now, but when I flashed it the same thing happened. Boot loop. So I went back into fastboot and flashed the RSD Lite stuff again. Rooted with towelroot. Unlocked with motoapocalypse. Verified status code 3 in fastboot. Verified root with Root Checker. Installed Flashify, but I haven't installed a recovery yet. Was TWRP my problem? Why am I boot looping on custom ROMs? Can someone help me out, or point out something Ive missed here?
Click to expand...
Click to collapse
You have to ensure the ROM you are using is built for the KK kernel. Not all ROMs work with the KK kernel.
Here is a list of ROMs that work with KK:
http://www.droidrzr.com/index.php/topic/48909-kitkat-roms-list/
Anything else will result in what you are experiencing - bootloops.
Related
This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
confuz said:
This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
Click to expand...
Click to collapse
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
CyberdyneSystems said:
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
Click to expand...
Click to collapse
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
try this thread...otherwise...you need to RMA it to asus,or the store you bought it from
http://www.scottsroms.com/showthread.php/1637-Tf300t-sku?p=13102#post13102
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
probably the bootloader, looks for a simple command,file....its not there,so its stuck in a loop
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
First declare your bootloader. Have you ever been on a jb-rom, stock or otherwise?
Looking at git for cm it appears the kernel is 2.6, so I would expect that is not a jb rom.
cwm has some issues on this unit.
get into cwm and use fastboot to flash twrp for the proper bootloader you have.
or get into fastboot by use of power and volume down
at that point you can twrp a rom into place; probably not to restore your backup as twrp and cwm have issues reading each others backups.
Good Luck!
Note: If you can power up and access recovery (cwm in your case) you are not bricked and should be able to recover. I have as well as many others. Take your time and go a step at a time! Make back ups and make sure you have fastboot and adb access to your unit! If you are still ics bootloader consider nvflash once you have this mess sorted.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Dfanzz said:
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Click to expand...
Click to collapse
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
k4killer said:
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
Click to expand...
Click to collapse
Great that ur nandroid worked! I know they r working on it... dont really have a time frame... just be on the lookout
xt926 with unlocked bootloader and can run 10.1 nightly from get.cm with no problem. However, when I install a 10.2 nightly - whether from get.cm, epinter, dhacker or skrilaz - even though the initial boot comes up clean, rebooting after the initial boot gets stuck on the boot logo.
I have tried different recovery images - cwm, twrp, oudhs - and different versions of each.
I have tried clean installs, full formats and dirty upgrades from 10.1.
I have tried multiple force boots from this state (power+vol up).
I have tried with and without the updated gapps and UPDATE-SuperSU-v1.51.zip.
Restoring from backup does not get past this hang. The only way out is to revert to stock (I use mattlegroff's DROID_RAZR_HD_Utility_1.21).
Does anyone have any idea how I might get past this or even get a log?
Only thing that fixed this for me was to flash back to stock 4.1.2, flash newest CWM touch recovery, then flash newest nightly, Gapps, and SU. Then, a popup comes up saying something about the ROM wants to flash your boot image, and asks if you'd like to fix this. I answered YES (fix) and been working since.
Any chance you could link where you got your recovery and SU?
Much appreciated.
Same issue here...
I've also tried everything listed above. I've done everything i can possibly think of to get cm 10.2 on my xt926. For some reason my phone just isn't making it after the first reboot. I've searched and found similar issues but none of the troubleshooting has been working for me. I hope to find a way around this. I need that 10.2!
Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.
GeorgeHahn said:
Same issue here. Not just CM, every 4.3 based ROM I've tried has either failed to boot or failed to boot more than once (more often than not, they won't boot at all).
I've been at this for hours, but I've had no success so far. I'll let you know if I come up with anything.
EDIT:
Here's my setup:
After every try, I flash back to stock 4.1.2 with VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC.xml. I've edited it so it doesn't flash the stock recovery and so it flashes a modified logo that doesn't show the bootloader warning. Partway through, I booted up and updated to the latest OTA, so I had to comment out the tz.mdm files as well. I was using TWRP 2.2.2.1, but I updated to 2.6.0.0 earlier.
Click to expand...
Click to collapse
one of 2 things should fix this problem,
use cwm 6.0.3.5 from here or
go to recovery/mounts and storage and format the data-media line (i know it says sd card but its internal, do not format the external ed card line or you will loose data on it)
also i updated matts utiliity to the latest ota, so you dont have to take the ota just to get the baseband. its in the dev forum. i will be updating it to a newer version if you wait until later, with the newest recoveries.
edit, btw 2.6.0.0 is not the latest twrp although i recommend using cwm as some have had issues with twrp including me.
First off, the latest TWRP seems to have fixed the problems (for me, anyway). Second, you'll need to use the most up-to-date GAPPs when you flash. Also, a lot of people have noted that mounting sytem prior to doing their wipes has solved the reboot issues.
Thanks a ton for the help. Flashed latest CWM and bumped up to 4.4 and everything's working fine. I appreciate the help!
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?
its a first gen US boost mobile moto g xt1031. it is boot-loader unlocked and rooted. currently has twrp recovery and had cwm. i have never been able to flash any rom either from side-load or from internal or external sd. about a month ago i started having trouble restoring backups and now a few days ago it wont let me make a backup either. it gets stuck when it comes to restoring or backing up the data partition. beforehand i had no problems with backups. when i got the phone almost a year ago i didn't have any trouble boot-loader unlocking and rooting it. i am currently using lubuntu with the android sdk installed and my phone is recognized in adb and fastboot. i have been rooting and flashing android since my hd2 days and i never had this problem. i have tried several different boost moto g roms and none of them will boot. i just get boot loops. i have tried 4.4.2 4.4.4 and 5.0 roms. none will boot up. can anyone help me out with any ideas of whats wrong? debugging is on and again it is rooted boot-loader unlocked running twrp and recognized on my computer with adb and fastboot. thanks.
I am having the exact same issue. I first flashed BlissPop onto the device, and immediately ran into boot loops. I flashed a CM nightly for the 1031, same issue, and now even a stock rom does nothing but boot loops.
i have been trying to run cm since last july. im almost to the point that i dont even want this phone anymore. ive never had this problem with any other phone. i hope someone can help us. the only thing i can flash is recovery. but thats pretty much pointless since i can flash a rom or create or restore a backup. the old backup i have fails when it comes to date but it will boot. i just have to start from the beginning every time.
Yeah man, I've been through everything I typically do for rescues like this one, nothing has worked. Stock ROMs bootloop as well, which is just strange. I'm starting to think I killed the parition table on the phone itself.
davenull said:
I am having the exact same issue. I first flashed BlissPop onto the device, and immediately ran into boot loops. I flashed a CM nightly for the 1031, same issue, and now even a stock rom does nothing but boot loops.
Click to expand...
Click to collapse
good news that might help you. i had to reformat my whole system and change it to f2fs using twrp. installed cm 11 and it booted up just fine. im gonna try to install cm 12 now. finally after nearly a year... oh and no thanks to anyone else on this thread. (you not included in that).
I just got this from a friend, it's the original that he never sent back for replacement. I planned to replace the battery myself and use it. I installed Resurrection Rom and somehow the file system got corrupted. No idea how it happened as the tablet already had TWRP and all I did was transfer over the rom files/gapps, recovery wipe, installed and restarted. Bootloader is unlocked.
How can I remedy this without running the risk of getting my bootloader brick from the kill switch?
EDIT:
Could it be that I went from LP to MM?
I got this fixed. I found this nv-recovery-image-shield-tablet-wifi-update3_1_1.zip in another thread, ran that and restored the tablet, stayed in fastboot and pushed the latest TWRP, booted into TWRP, and flashed Blisspop. I'm back up and running.