Related
Soft Bricking ?
Phone starts and stuck on the Yu logo.
Hard Bricking?
Phone does not start even if the battery is full. Have to go to the service center.
[Note]
1.Make sure that you have 70-80% battery on your phone.
2.You need a PC and a USB cable to connect your phone to the PC.
3.Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
[Required Downloads]
1.Download the flash tools.
2. Download the factory firmware (signed fastboot)
3. adb setup drivers.
4. Mirror for drivers manual install here.
5. You can use this tool performs various functions.
# [Install Adb Derives Manually]
1. First of all extract the downloaded file and save it in the computer.
2. Before installation you have to disable the "signature verification" in windows. In windowa 8 or 10 you can do it by going to advanced settings or you can google the way of disabling signature verification.
3. After that turn off the phone and connect it pressing vol up that it will boot in fastboot mode.
4. When you connect the phone go device manager and search for device connected showing error sign.
5. Now click on that device and check for deriver update.
6. Now select the deriver in computer not automatically and select all devices.
7. Now select "have disk"
8. Browse the folder where you had extracted the adb drivers.
9. Now select the drivers file and install.
10. Ignores the Warning and select "always allow"
11. When finished check the device again by connecting to computer in fastboot mode with usb.
# [Flash Factory Firmware]
Steps
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Congrats!
# [Recovey Installation (Very Easy Method)]
Note
1. Phone must has unlocked bootloader.
2. It must be rooted.
Steps
1. Download the twrp.img file and place it into your phone storage.( you can choose any custom recovery)
2. Now download the app from playstore flashify
3. Now install it and open the app it will require permission for root access, allow the root access.
4. Now open the app and u can backup the current recovery.
5. Now select the "flash" menu and select the "recovry image" and choose the .img file from storage.
6. Then select yes for flashing warning and will says flashing recovery. After completion it will say flash completed.
7. Now select the option button on right top corner and select the reboot into recovery.
8. Now it will reboot into recovery.
Hit "Thanks" if found this thread helpful....
Thanks for the solution...... it works well !!
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Sahilsharma said:
Though my yuphoria was working perfectly fine, i wanted to factory reset my mobile for some reasons, which i was not able to do. Both soft and hard custom recovery options were not working (no recovery screen pop up, mobile boots and stuck at YU logo ), tried your solution and it worked.
Just one input for new users like me, where you have asked users to install adb drivers, i tried that part but on running the bat file, the device was not detected, hence had to add yuphoria device drivers from their official site, i am not able to paste the link here but file name is YUPHORIA_drivers-v1.0.zip, also USB debugging option needs to be turned on in developer option for this solution to work.
Rest all steps work exact as you explained.
Click to expand...
Click to collapse
Yup bro its difficult to set bootloader driver for yuphoria. But you can install it manually. But always remember to "disable driver signature verification" before installation and i will update the derivers link for manual installation if you message me the link.
will this work on unlocked bootloader
nickjones1007 said:
will this work on unlocked bootloader
Click to expand...
Click to collapse
"yup"... it will work. There is nothing to do with boot loader. It will flash the stock rom and boot-loader will get locked again. You have to unlock the boot-loader again if you want to flash custom rom again.
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
nickjones1007 said:
And i will get the official ota updates from YU as well ?
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
yep bro.. you will get the updates and i don't think you know that, there are no restrictions for unlocking/locking boot-loader of YU mobile. I mean the warranty not void if you unlock the boot-loader.
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
nickjones1007 said:
Thnx a lot bro and yeah i knw that ... Actually i'm gonna start installing roms so in case if it goes wrong i just a needed reliable method to get back on stock company's software ....
Thnx again bro
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
its reliable bro and worked for me when i screwed my phone. But note one thing that you should have installed the adb drivers properly on your computer. Anyway if u screwed up don't hesitate to discuss here.
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
goudaniket said:
When i start the flashall.bat the phone restarts and stuck back at the cyanogen logo..!
Click to expand...
Click to collapse
Is driver properly installed? Or retry to download setup again if you have done right then
1. boot into bootloader
2. run bat file it will take some time. If all goes well then it will say about relocking of boot-loader.
3. seletct yes and restart.
4. you will see yu logo and it will take 10-15 minutes to load so stay calm! If it doesn't load then try again.
awesome... worked for me
maazkazi91 said:
awesome... worked for me
Click to expand...
Click to collapse
You can simply hit the thanks buttton bro
Can u remember me?
I can't root my YU 5010a
ankityu said:
I can't root my YU 5010a
Click to expand...
Click to collapse
I think you have issue with adb driver .. Is that resolved?
No man
...its still stuck in there..
ankityu said:
No man
...its still stuck in there..
Click to expand...
Click to collapse
Bro i hv updated the thread with steps to install adb drivers. Try it and then report if it works.
What is signed fastboot
ankityu said:
What is signed fastboot
Click to expand...
Click to collapse
Install it . these are the drivers.
Hi guys,
As mentioned in a previous thread, my F1 is soft bricked, only with the Oppo logo, no fastboot or recovery. I need to flash it again with a soft called QFIL (soft for Qualcomm devices). But it can't be done with the ordinary stock roms, I need a specific rom compatible with QFIL, like the ones used in the service centers. Is there anyone who can provide me with such a rom, or a link to download one in order to save my device?
Thank you
Can someone owning a Oppo f1 use QFIL to extract all the necessary files in order to flash them to my phone? I would be very grateful.
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hi, good news, I would be glad and would appreciate if you could send them to me.
Thanks in advance.
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
Hi, I downloaded the zip, followed your steps and...my phone is alive and everything works perfectly. Thank you so much for your help. Couldn't have been done without you.
How to choose the port?? I am not able to choose the port. When i connect it to pc whole holding volume up button it doesn't show anything.
sir is your file is from optus australia
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
oppo f1f from optus australia need qfill firmware
i m from india set come to me for sim unlock
i follow this guide (How To unlock Oppo F1f - Guide unlock network Oppo mobile F1f from youtube) to flash modified firmware
but at the first step i flashed magictricks.zip & set goes to qdloader 9008 mode after reboot
so i need optus australia firmware,thanks in advance
Need some help - Msm8x39DownloadTool.exe not finding phone
Qualcomm HS-USB QSLoader9008 on COM3, according to Device Manager, yet Msm8x39DownloadTool.exe doesn't want to find it at all - Device not connected.
Any help would be really appreciated.
Edit: I have made some progress with some steps not included above.
1) Disable 'Driver Signature Enforcement' in Windows (Google is your friend)
2) Before installing the provided drivers, hold the Volume Up button on your phone, and insert USB from PC > Phone. This places the phone into QHSUSB mode and will be found in Device Manager, under Ports (The Android Bootloader Interface (fastboot) device has an ID of '18D1-D00D', while the QHSUSB device ID is '05C6-9008'.. bingo!).
3) Install the driver as directed. This will change the device from QHSUSB mode to HS-USB QDLoader 9008 on COM3.
Continue with the rest of the guide.
Stock recovery will be returned (v1.2 Rooted - I don't remember this). From here you can install Project Spectrum again, and return back to ColorOS after that.
Hopefully this helps.
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
As you still have access to stock recovery, you dont need to use download mode.
Simply put a stock rom zip on your sdcard and flash via the stock recovery. (might have to wipe data also if flashing a different version of the rom).
That will fix your phone.
To get access to fastboot (should you need to flash TWRP recovery), flash magictricks.zip via recovery.
If your phone is so busted you no longer have access to fastboot and recovery it will automatically default to QDloader mode (download mode).
If you want to access download mode while your recovery is still ok, switch phone off, hold Vol-Up (or Vol-down, can't recall) and plug in the usb cable.
AS LONG AS YOU HAVE ACCESS TO RECOVERY, USE THAT TO FLASH A STOCK FIRMWARE, GETTING THE QDLOADER DRIVERS CORRECTLY INSTALLED ON WINDOWS CAN BE RATHER TRICKY.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hey man can you help I've soft bricked my oppo, please need flashing tool and rom
phaw16 said:
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
Click to expand...
Click to collapse
HEY BRO HOW DID YOU FIX YOUR F1f SAME PROBLEM HERE I TRY THE STEPS ABOVE BOT INSTALLATION FAILED WHEN FLASHING A ROM please HElp me ver 1.2(rooted)
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
thanks sir, its work
Edabigael said:
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
Click to expand...
Click to collapse
u neeed to flash OTA firmware from recovery, that what i did.. i use F1EX_11_OTA_002_all_201601170010.. put on your sd card and install
hello guys previous night my opo is automatically restart and hang on logo i try to restart several times and leave mobile upto 1 hour but cant succeded.... the condition is set is going to fastboot and recovery and charging also i try wipe cache but still same.... i have very important data inside my opo.... please guide me how i recover my opo or inside data....
oneplus one
variant 64gb
os cyanogen 12
Is it a stock COS ROM?
I suggest you to dirty flash the rom without overwriting /data
So if you flash the zip it's OK but if you flash from fastboot be aware of not flashing userdata_64.img
yes my ROM is stock rom .... what is dirty flash please guide me....
imran72199 said:
yes my ROM is stock rom .... what is dirty flash please guide me....
Click to expand...
Click to collapse
-Is your bootloader unlocked?
-What recovery do you have?
Available signed flashable ROMs: https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
Find yours or just chose one, and download the signed flashable zip, then copy it to the phone (while in recovery the phone has MTP enabled on the PC) then just flash that ROM from the recovery, this will overwrite system but won't touch data and most likely fix the bootloop.
Before rebooting after flash wipe cache and dalvik just in case.
Next time do a nandroid backup if you have sensible data. I usually don't keep anything important on the phone, everything on google drive.
I don't know my bootloader is locked or unlocked.... when I try to connect phone in recovery and connect USB nothing happen but when I restart phone and set is on onelus logo and attch usb PC recognized as mtp USB device but driver failed....
I don't know my bootloader is locked or unlocked.... when I try to connect phone in recovery and connect USB nothing happen but when I restart phone and set is on onelus logo and attch usb PC recognized as mtp USB device but driver failed....
imran72199 said:
I don't know my bootloader is locked or unlocked.... when I try to connect phone in recovery and connect USB nothing happen but when I restart phone and set is on onelus logo and attch usb PC recognized as mtp USB device but driver failed....
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Do this.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Do this.
Click to expand...
Click to collapse
He wants to keep data... So he at least should try my method first.
seanwlk said:
He wants to keep data... So he at least should try my method first.
Click to expand...
Click to collapse
Then reply him about his latest query.
imran72199 said:
I don't know my bootloader is locked or unlocked.... when I try to connect phone in recovery and connect USB nothing happen but when I restart phone and set is on onelus logo and attch usb PC recognized as mtp USB device but driver failed....
Click to expand...
Click to collapse
Which recovery? Stock or twrp? I'm not sure that when you have stock recovery on the phone gets recognized as mtp on the PC.
I can think of adb to push the ROM zip on the PC but if you claim it doesn't get recognized I have no clue. Are you sire you have the google USB drivers installed?
seanwlk said:
Which recovery? Stock or twrp? I'm not sure that when you have stock recovery on the phone gets recognized as mtp on the PC.
I can think of adb to push the ROM zip on the PC but if you claim it doesn't get recognized I have no clue. Are you sire you have the google USB drivers installed?
Click to expand...
Click to collapse
i have cyanogen recovery.... my set is previously rooted with kingoroot..... i dont know what to do which driver should install or which rom should be good for me..... please give me simple method to recover my data from opo..... i dont have twrp recovery installed.... only cyanogen recovery after pressing vol+ vol- and power this are the options under cyanogen recovery.....
reboot system now
apply update
wipe data/factory reset
wipe cache partition
wipe media
reboot to bootloader
power down
view recovery logs
inside apply update
apply from adb
choose from internal storage
imran72199 said:
i have cyanogen recovery.... my set is previously rooted with kingoroot..... i dont know what to do which driver should install or which rom should be good for me..... please give me simple method to recover my data from opo..... i dont have twrp recovery installed.... only cyanogen recovery after pressing vol+ vol- and power this are the options under cyanogen recovery.....
reboot system now
apply update
wipe data/factory reset
wipe cache partition
wipe media
reboot to bootloader
power down
view recovery logs
inside apply update
apply from adb
choose from internal storage
Click to expand...
Click to collapse
Install fastboot,adb and google USB drivers : https://drive.google.com/file/d/0B9fZIF6vzIBzT2ZtZkNSVFI5ZHc/view?usp=drivesdk
Reboot the pc
Download twrp: https://dl.twrp.me/bacon/twrp-3.1.0-0-bacon.img.html
Reboot in fastboot mode.
Open a command prompt on the PC inside the folder where the downloaded recovery is.
-Find the folder (maybe user/Downloads)
-while holding shift mouse right click inside the folder
-select "open command prompt here"
Connect your phone and type in cmd
Code:
fastboot devices
If you're lucky and did everything correctly then your phone should appear and you can continue, if not uninstall the drivers you previously had and kingroot and whatever minitool you used and try again.
Now that the device is visible
Code:
fastboot flash recovery twrp twrp-3.1.0-0-bacon.img
Phone should reboot. Just turn off and boot into recovery and hopefully you'll see twrp.
Now connect the phone to the PC an you should see the mass storage and you'll be able to copy the ROM zip there.
Now just flash the zip of the rom and you're done.
U cannot assure you that it will fix the bootloop but it's your best choice.
In the future:
-Never use kingroot or other ****ty mini tools. CMD and manual flash are always the best choice.
-Do a backup if you are not confident with this kind of stuff.
-Don't keep too much stuff on the phone. Use google drive. And services to save contacts, notes images videos.
seanwlk said:
Install fastboot,adb and google USB drivers : https://drive.google.com/file/d/0B9fZIF6vzIBzT2ZtZkNSVFI5ZHc/view?usp=drivesdk
Reboot the pc
Download twrp: https://dl.twrp.me/bacon/twrp-3.1.0-0-bacon.img.html
Reboot in fastboot mode.
Open a command prompt on the PC inside the folder where the downloaded recovery is.
-Find the folder (maybe user/Downloads)
-while holding shift mouse right click inside the folder
-select "open command prompt here"
Connect your phone and type in cmd
Code:
fastboot devices
If you're lucky and did everything correctly then your phone should appear and you can continue, if not uninstall the drivers you previously had and kingroot and whatever minitool you used and try again.
Now that the device is visible
Code:
fastboot flash recovery twrp twrp-3.1.0-0-bacon.img
Phone should reboot. Just turn off and boot into recovery and hopefully you'll see twrp.
Now connect the phone to the PC an you should see the mass storage and you'll be able to copy the ROM zip there.
Now just flash the zip of the rom and you're done.
U cannot assure you that it will fix the bootloop but it's your best choice.
In the future:
-Never use kingroot or other ****ty mini tools. CMD and manual flash are always the best choice.
-Do a backup if you are not confident with this kind of stuff.
-Don't keep too much stuff on the phone. Use google drive. And services to save contacts, notes images videos.
Click to expand...
Click to collapse
writing recovery failed remote: device not unlocked cannot flash or erase
imran72199 said:
writing recovery failed remote: device not unlocked cannot flash or erase
Click to expand...
Click to collapse
This means your bootloader is still locked so you basically can't do anything. To unlock it you would need to factory reset. So your only option is to try installing the ROM via adb on the cyanogen recovery.
PS
Please don't spam my PM I can read you here I get notifications instantly. Thanks. I want to keep the post public in order to help future users in similar conditions so I'm not going to help you in private if it's not strictly necessary.
oneplus one data recovery
seanwlk said:
This means your bootloader is still locked so you basically can't do anything. To unlock it you would need to factory reset. So your only option is to try installing the ROM via adb on the cyanogen recovery.
PS
Please don't spam my PM I can read you here I get notifications instantly. Thanks. I want to keep the post public in order to help future users in similar conditions so I'm not going to help you in private if it's not strictly necessary.
Click to expand...
Click to collapse
if i try to install rom from adb it will kill my data??
imran72199 said:
if i try to install rom from adb it will kill my data??
Click to expand...
Click to collapse
Try to push the zip from adb to /sdcard and then flash the zip through the recovery (which technically should do it since it's a stock ROM)
This will result in a "dirty flash" which will not delete data.
This is your only option in the current state of your phone, if you had rooted your phone properly without kingroot you would have booloader unlocked an you would've had more options. If this doesn't work you are forced to factory reset. And use this opportunity to unlock bootloader with
Code:
fastboot oem unlock
Which due to security measurements will delete all the data.
Before you going to flash anything using adb or something, do this.....
1. Turn off your phone completely.....
2. Connect the charger and let it charger for 10 minutes
3. While the charger is still connected, press the power button (turn it on)
4. Wait....
If the phone boot normally while the charger is still connected, unplug the charger and waits....if the phone goes back bootloop after a few minutes and hours without charger connected then your problem is a dying battery not software....buy a new battery and once your replace it, it will solved your problem without having to flash anything via adb or recovery...it also can save all your data....
iPusak Gaoq™ said:
Before you going to flash anything using adb or something, do this.....
1. Turn off your phone completely.....
2. Connect the charger and let it charger for 10 minutes
3. While the charger is still connected, press the power button (turn it on)
4. Wait....
If the phone boot normally while the charger is still connected, unplug the charger and waits....if the phone goes back bootloop after a few minutes and hours without charger connected then your problem is a dying battery not software....buy a new battery and once your replace it, it will solved your problem without having to flash anything via adb or recovery...it also can save all your data....
Click to expand...
Click to collapse
battery is ok i try your method but not worked
seanwlk said:
Try to push the zip from adb to /sdcard and then flash the zip through the recovery (which technically should do it since it's a stock ROM)
This will result in a "dirty flash" which will not delete data.
This is your only option in the current state of your phone, if you had rooted your phone properly without kingroot you would have booloader unlocked an you would've had more options. If this doesn't work you are forced to factory reset. And use this opportunity to unlock bootloader with
Code:
fastboot oem unlock
Which due to security measurements will delete all the data.
Click to expand...
Click to collapse
what if i flash ota update file through adb sideload of oxygen os
iPusak Gaoq™ said:
Before you going to flash anything using adb or something, do this.....
1. Turn off your phone completely.....
2. Connect the charger and let it charger for 10 minutes
3. While the charger is still connected, press the power button (turn it on)
4. Wait....
If the phone boot normally while the charger is still connected, unplug the charger and waits....if the phone goes back bootloop after a few minutes and hours without charger connected then your problem is a dying battery not software....buy a new battery and once your replace it, it will solved your problem without having to flash anything via adb or recovery...it also can save all your data....
Click to expand...
Click to collapse
Lolwat?? What kind of sorcery are you talking about.... ? if it was the battery it wouldn't have happend right after he messed with that stuff. Improve your troubleshot skills ? this kind of stuff happened to me insane amount of times and always were able to fix it, in this case the guy is limited by the fact he doesn't have the bootloader unlocked.
imran72199 said:
what if i flash ota update file through adb sideload of oxygen os
Click to expand...
Click to collapse
That depends if you are running oxygen os, you can't flash an OTA of OS that you are currently not running. To dirty flash you have to use the same version or distribution of the OS you are currently running.
Hlw all.
Sorry for late to write this post. I will write this post in several parts. So Don't angry if i am late.
PART 1:
HOW TO UNLOCK BOOTLOADER
Click to expand...
Click to collapse
First add a xiaomi account on your device.
Now
1. Go settings
2. My Devices
3. All Specs
4.Miui Version
Tap 5 times to activate Developer Option.
Now return settings menu
And Scroll down
Go
1. Additional Settings
2. Developer option
3.OEM Unlocking [ On This]
Now turn on your phone's internet connection through personal data pack.
Now go Mi unlock status and press add account .
Your Device will be added successfully.
You have to wait 10 days for unlock your bootloader.
Xiaomi privacy policy
Click to expand...
Click to collapse
Now Go xiaomi website and Download xiaomi unlock tool .
You will need a pc or laptop with internet connection for this process.
Extract that zip and open Xiaomi unlock.exe
Login your Xiaomi account.
Backup important Documents on your phone.
Click to expand...
Click to collapse
Power off your Phone
Press "Power button + Volume down"
for fastboot mod .
Connect your phone through usb cable
Now press unlock
When it will complete 100%, Your device will unlocked and Reseted.
PART 2:
INSTALL TWRP
Click to expand...
Click to collapse
First you have to Download TWRP. Official twrp is not release. So you have to download unofficial twrp. it is safe and 100% well for Mi cc9. Because i am using this.
Download this from here:
https://androidfilehost.com/?fid=6006931924117916679
And Also download
adb usb driver version 1.4.3.exe
Install this software .
Next you have to enable usb debugging in your device.
Connect via usb cable to your pc or laptop.
Now unzip the twrp file and go that folder .
See many cmd command file in this zip inside.
Just open last one
Now write
adb devices
Click to expand...
Click to collapse
Screen on your phone and Ok the demon they ask.
Next write
adb reboot bootloader
Click to expand...
Click to collapse
Now write
fastboot flash recovery (copy full name of twrp and paste here).img
Click to expand...
Click to collapse
fastboot boot recovery (copy full name of twrp and paste here).img
Click to expand...
Click to collapse
Twrp will install successfully. just disconnect your phone and press power button + volume up.
Twrp will appear which one you install.
Any help you need just comments here if you failed.
Thats all for today.
Hi, I unlocked the Boot Loader but now I get a screeen in chinese which I am assuming is asking for my Mi account,phone number or email but every time I type any of those a red messege showes under the box which I am assuming meanes that something is wrong. Does anyone had the same problem and solution because I am pretty sure I know my Mi account and my phone number and they are tiped in correct.
dragokanev said:
Hi, I unlocked the Boot Loader but now I get a screeen in chinese which I am assuming is asking for my Mi account,phone number or email but every time I type any of those a red messege showes under the box which I am assuming meanes that something is wrong. Does anyone had the same problem and solution because I am pretty sure I know my Mi account and my phone number and they are tiped in correct.
Click to expand...
Click to collapse
Use those phone number and password which one you sing in for unlock bootloader.you need internet connection to complete this process.
im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?
majigs said:
im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?
Click to expand...
Click to collapse
Yes. You have to write:
fastboot boot recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img
easier to rename the file to twrp.img .....
Please help to restore CC 9
Please help me bring my Xiaomi CC 9 back to life. I updated it with MIUI 11.3.3.0.PFGEUXM and my device does not boot normally. My bootloader is locked and an account is not installed in the developer settings. Does anyone know what to do ???
I got error -1 on my smartphone when I added account and device in the '' mi unlock status '' menu.
How to solve
--
Edit:
resolved: I logged out and logged into the Mi account on the device and gave no error
I have to wait 168H to unlock
Tks
GSI's are quite good. I have good SOT with ArrowOS GSI: 12h - 13 h. I think it's more interesting to use Pie GSI's for now.
Where can I get this ArrowOs GSI rom?
Unlock tool stops at 50%
What should I do when the Unlock Tool stops at 50% and reports: couldn't verify the device. Is it because I haven't waited the 10 days yet?
You have to wait to unlock bootloader.
majigs said:
im stuck at "fastboot boot recovery (copy full name of twrp and paste here).img"
is it the same file "recovery-TWRP-3.3.1-0709-XIAOMI_CC9-CN-wzsx150.img"?
Click to expand...
Click to collapse
you dont have to boot the image if you flashed it first, if you did 'fastboot flash recovery recoveryname.img', no reason to do the boot part, just do fastboot reboot-recovery
if you dont want to flash twrp over your stock recovery, then use the fastboot boot recoveryname.img and then mess around with twrp, backup everything and flash a new rom and reboot, next time you reboot to recovery, stock will still be there
Hello. I'm having problems unlocking my new phone. When i open Mi unlock tool, unlock option is greyed out.
I installed drivers through unlock app and option "install drivers" Also installed adb drivers that I got with ulock app through device manager - add legacy hardware
But something is wrong. Someone please help me.
axlina said:
Hello. I'm having problems unlocking my new phone. When i open Mi unlock tool, unlock option is greyed out.
I installed drivers through unlock app and option "install drivers" Also installed adb drivers that I got with ulock app through device manager - add legacy hardware
But something is wrong. Someone please help me.
Click to expand...
Click to collapse
In this unlock tool folder ( Install Drider) one file exist.
You must install it. Then your device will connect.
someone please help me. I unlocked bootloader and trying to install TWRP but everytime I try it's stuck at sending recovery. I've waited for 10 minutes and then I qut. What am I doing wrong?
Commands adb devices and fastboot devices recognize my phone.
axlina said:
someone please help me. I unlocked bootloader and trying to install TWRP but everytime I try it's stuck at sending recovery. I've waited for 10 minutes and then I qut. What am I doing wrong?
Commands adb devices and fastboot devices recognize my phone.
Click to expand...
Click to collapse
Unfortunately I can't help you with that but I have a question did you wait 10 days or not cause my phone just refuses to cooperate with the unlock tool. Sometimes the fastboot logo just disapears and it says press any button to shutdown.
Edit: Just to clarify the flash tool does not say anything about the waiting period. If someone can help me or clarify the situation I would greatly appreciate it.
Alright so it appears to either be a USB gen limitation or just my plain ass stupidity for not installing adb drivers. Hell if I know but either way now it says how many days I have to wait so nice.
TelumLetiferum said:
Unfortunately I can't help you with that but I have a question did you wait 10 days or not cause my phone just refuses to cooperate with the unlock tool. Sometimes the fastboot logo just disapears and it says press any button to shutdown.
Edit: Just to clarify the flash tool does not say anything about the waiting period. If someone can help me or clarify the situation I would greatly appreciate it.
Alright so it appears to either be a USB gen limitation or just my plain ass stupidity for not installing adb drivers. Hell if I know but either way now it says how many days I have to wait so nice.
Click to expand...
Click to collapse
Download 15 seconds adb installer and answer question with three yyy.
I waited 43 hours to unlock bootloader.
I have performed all the steps successfully, but unable to boot into twrp by pressing power + vol up, still booting in stock one, anybody facing the same issue?
kingofmb said:
I have performed all the steps successfully, but unable to boot into twrp by pressing power + vol up, still booting in stock one, anybody facing the same issue?
Click to expand...
Click to collapse
It's power button +volume down... Try again
Hello Everyone,
I hope you are doing good, Cant run my S7 G930T mobile.
I have upgraded OS via Odin, it passed but phone is not getting work.
Sometimes it doesn't open recovery boot and gets stuck at Recovery Booting.....
Sometimes it restart from the installing applications screen.
If you have any files for binary 11 (B) or anything i need to do before flashing OS via Odin.
Please help me
I'd be very thankful to you.
Thanks!
[email protected]
sabeel43 said:
Hello Everyone,
I hope you are doing good, Cant run my S7 G930T mobile.
I have upgraded OS via Odin, it passed but phone is not getting work.
Sometimes it doesn't open recovery boot and gets stuck at Recovery Booting.....
Sometimes it restart from the installing applications screen.
If you have any files for binary 11 (B) or anything i need to do before flashing OS via Odin.
Please help me
I'd be very thankful to you.
Thanks!
[email protected]
Click to expand...
Click to collapse
Can you be more specific about your booting issues?
Is the device boot looping? How far through the booting process do you get before failure? and what happens after failure?
Can you get your phone into recovery mode or download mode?
ReboundGuy said:
Can you be more specific about your booting issues?
Is the device boot looping? How far through the booting process do you get before failure? and what happens after failure?
Can you get your phone into recovery mode or download mode?
Click to expand...
Click to collapse
Sometimes it gets ON normally and after some time it reboots itself and then it keeps doing it again and again, and sometimes it gets on and goes straight to the recovery mode, and yes i can get my phone into download mode too.
If you have precious data you want to keep, then you should create a back up of your phone, if you haven't already done so.
If you're unconcerned about data or have created a backup, then you could factory restore from recovery mode.
Alternatively, if you haven't got the latest version of Odin, then you could try downloading the latest Odin software and attempt another flash.
Another thing you could try, is to sideload the update via adb. You will of course need the latest adb software which is easy to find. You can follow this xda guide here (https://www.xda-developers.com/install-adb-windows-macos-linux/), or if you prefer it you could download Android Studio from here (https://developer.android.com/studio).
To sideload the update you will have to:
1. Boot phone into recovery mode. Hold the volume up, home, and power buttons, and then let go of the power button when it power on.2. When in recovery mode, select the option, "Apply update from ADB."3. With your phone plugged into the computer, open the cmd/terminal and type "adb devices". The cmd should start up adb and display something like:List of devices attached[device id] sideload4. Navigate to the folder that contains the update file. It needs to be a .zip file.5. Type in the command, "adb sideload [file name]".
To make things easy you can set up adb so you can run its commands from any directory, the steps for this are covered at the end of the xda guide I have linked.
ReboundGuy said:
If you have precious data you want to keep, then you should create a back up of your phone, if you haven't already done so.
If you're unconcerned about data or have created a backup, then you could factory restore from recovery mode.
Alternatively, if you haven't got the latest version of Odin, then you could try downloading the latest Odin software and attempt another flash.
Another thing you could try, is to sideload the update via adb. You will of course need the latest adb software which is easy to find. You can follow this xda guide here (https://www.xda-developers.com/install-adb-windows-macos-linux/), or if you prefer it you could download Android Studio from here (https://developer.android.com/studio).
To sideload the update you will have to:
1. Boot phone into recovery mode. Hold the volume up, home, and power buttons, and then let go of the power button when it power on.2. When in recovery mode, select the option, "Apply update from ADB."3. With your phone plugged into the computer, open the cmd/terminal and type "adb devices". The cmd should start up adb and display something like:List of devices attached[device id] sideload4. Navigate to the folder that contains the update file. It needs to be a .zip file.5. Type in the command, "adb sideload [file name]".
To make things easy you can set up adb so you can run its commands from any directory, the steps for this are covered at the end of the xda guide I have linked.
Click to expand...
Click to collapse
I tried to update from ADB but it said, unauthorized access!
and I also think it is a hardware issue
Can you start in safe mode?
ReboundGuy said:
Can you start in safe mode?
Click to expand...
Click to collapse
Yes if it boots normally and then i can go safe mode too.
Just so you know, I'm running out of ideas. Can you try the other suggestion that I mentioned above?
The one where I suggested flashing through Odin again?
I'm kind of assuming that USB Debugging and OEM Unlock were turned on as well.
ReboundGuy said:
Just so you know, I'm running out of ideas. Can you try the other suggestion that I mentioned above?
The one where I suggested flashing through Odin again?
I'm kind of assuming that USB Debugging and OEM Unlock were turned on as well.
Click to expand...
Click to collapse
now Its not turning on , not even on charging
Ikes! Are you able to try and downgrade to your original stock firmware? Seems like the issues began with trying to update.
where can I download original stock firmware from the internet? Can you provide me the link kindly? Last time I used Frija (desktop app) to download firmware.
Pretty much everyone on xda (including me) uses this website for firmware: https://www.sammobile.com
You have to create a free account but it's worth it for all the firmware they have available.
I believe you already know this, but I'm just going to cover the bases anyway, make sure to download firmware for your specific model G930T.