[email protected]
I get a new Mate 7 some days before and after a root process i'm trying now to reset the Device to the stock State and i'm little bit confused about all the Firmwares which are available for a download.
My Mate 7 is a MT7-TL10 Version with a preinstalled Firmware- Version MT7-TL10 V100R001C00B120SP04. I'm searching on the Huawai official Site under Region Switzerland for my ROM Version and i found and download it, but after extracting the ZIP File, i found a Word Document named MT7-L09 instead of MT7-TL10. So i'm not able to flash it, i mean i didn't try it because it's not the same Model and i wan't brick it. After reading three different Forums about Firmaware and flashing the Mate 7, i download the Global ROM MT7-TL10V100R001C00B119SP03. I was able to flash it and after a completed Factory Reset in the Stock- Recovery with Wipe Data/System & Wipe Cache it looks like SuperSU it's gone, BUT!!
I get some new Stuff on my Phone like Opera Browser and Payment UICC, and i'm not able to get OTAs. If i search for it on the Phone i allways get the same Message, there aren't Updates available. I thought if i flash MT7-TL10V100R001C00B119SP03 i would be able to get to MT7-TL10 V100R001C00B120SP04 by OTAs but it looks i was wrong.
Can somebody explain to me what to do to get the Fimware Version on the Phone where it was delivered with it? Please..
Many thanks!
[email protected]
I solved my Problem with Restore to Stock.
And this is how i do it:
After i wasn't able to download the ROM Version MT7-TL10 V100R001C00B120SP04 from Huawai Global Site when i choose Switzerland as my Conutry even though a download was available, but after unziping the File you get instead MT7-TL10 a MT7-TL09 ROM, i choose Italy as my Country and i get the right ROM.
I unzipped the ROM and copied it to the local Store of the Phone, then used the EMUI Updatetool and choose a local Store update. The Phone does a restart and boot up after the Update was done. To remove Opera and other Stuff from MT7-TL10V100R001C00B119SP03 i do a Factory reset. After the Phone boot up again, it was the original State like it was delivered the first Time. After check for OTAs i received a new Update and was able to install it successfull, so im now on MT7-TL10V100R001C00B125SP02.
Maybe it helps someone.
Thanks again!
Hey bud, so what's is the major and minor improvement of this latest firmware compared to the older one do you think?
Does your Huawei MT7-TL10 have dual SIMs?
yes, the gold version.
http://www.digitalversus.com/mobile-phone/huawei-ascend-mate-7-gold-p24105/test.html
Related
Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis
Check INDEX
"For L12 Users ONLY" Sections you might need to restore correct version stock local.prop and build.prop
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?
henr721 said:
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?
Click to expand...
Click to collapse
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
From huawei club forum, which posted by Chinese, they provided a "middle package" for H60-L02/L12, L01/L03/L11/L21:
Link for refer: http://club.huawei.com/thread-4744481-1-1.html
中转包地址如下：
荣耀6移动版（H60-L01/L03/L11/L21）
荣耀6联通版（H60-L02/L12）
We have to download it, then do upgrade it first before upgrade ROM version.
P/S: If you cannot extract it, may need rename it from chinese name to latin letter.
If need assist in Chinese word, let me know.
Hope this help.
lmpcruz said:
Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis
Click to expand...
Click to collapse
Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
Julsen1985 said:
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Click to expand...
Click to collapse
Hi all, I'm new of the forum, and this seems to be exactly the same issue I'm having.
I had to buy a replacement for my H60-L12 and I decided to buy a new one, so I went to the same store and I ordered the same phone.
When it arrived, the label indicate H60-L12, bon on the box and on the back of the phone. But when I switched on, the model name and the serial number indicated the H60-L02.
What is really strange is that, according to what I have been seeing on technical specification on internet, the L02 should have 16GB di memory, while this one has 32GB.
Do you have any idea if it is possible to verify from the IMEI what is the real model of the phone and if it is possible that a L02 firmware version was installed on a L12? I have the B316, I have tried to dowload the B316 for the L12 and put it on the dload folder, then local update, but it fails (probabily because it is the same version?).
I have download the H60-L02/L12 file indicated in the previous post, but it is very small. Is it ok?
After I have installed it using the local update procedure, what should I do?
Thanks!
I will share my experience with this issue.
As it turned out, my L12 was flashed with the wrong firmware and seens as a L02.
No way to restore the correct version with any more or less standard procedure (not even copying the built and prop files from the L12, the upgrad was always failing).
So, for future reference, what I did was:
- use the unbrick function to load a EMUI2.3 version of the firmware (at this point the phone was almost unusable because everything was crashing)
- copied the L12 B316 on the SD in dload directory
- installed using the three button procedure
The upgrade was correctly executed and now everything is working fine.
In case someone was wondering why I didn't use the unbrick function to load the L12 B316, the answer is: I did it, but it was not working. As I said, it seems that the unbrick function leaves a lot of the previous installation behind, and despite the load of the B313 (yes, I tried the 313 to be able to update then to 316 with the complete update package and have a clean installation), the update package was downloaded but not installed, always giving error. Same with the three button procedure.
So, the only way I found has been to revert to 2.3 and then apply the update.
Now I would like to know who flashed the L02 on my L12 and made me loose four days
I had been searching for a way to update my EVA-L09C636 (Asia-Pacific) model to EMUI 5.0. During the previous month I tried to install EVA-L09C636B361 firmware via either dload and Huawei Updater, but such means of direct installation never worked out.
Now the problem is solved, and the solution is quite simple, though a little bit unexpected: using Huawei Updater to install EVA-L19C636B190 before installing EVA-L09's own B361 firmware. I mean, it is interesting that we have to "borrow" the B190 firmware from the Dual SIM L19 model in order to update to EMUI 5.
(I'm not the first person to find the solution. I just found out that in a Taiwanese forum a tutorial is already posted. )
So there are two steps to install B361:
1.
Install EVA-L19C636B190 via Huawei Updater
Use Custom ROM URL
Copy and paste the link to EVA-L19C636B190:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v64578/f1/
Use the HiSuite on PC to finish the installation of B190 (Set its proxy to 127.0.0.1 and the port to 41279)
2.
Repeat the previous process, but this time, replace the link with the one to EVA-L09C636B361:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73928/f1/
Again, use the HiSuite to finish the installation of B361
Note that the C636B190 version firmware for L19 model does run on L09 without the support of the L09-exclusive NFC. I think there should be a thread discussing this. Anyways, before official update comes out, the two steps above seem to be the only way to install EMUI 5 on the Asia-Pacific EVA-L09C636 version without losing data.
That is interesting, I dont have a C636 but I would assume just doing step 2 without the need to flash a L19B636 would do the trick.
whyhowie said:
I had been searching for a way to update my EVA-L09C636 (Asia-Pacific) model to EMUI 5.0. During the previous month I tried to install EVA-L09C636B361 firmware via either dload and Huawei Updater, but such means of direct installation never worked out.
Now the problem is solved, and the solution is quite simple, though a little bit unexpected: using Huawei Updater to install EVA-L19C636B190 before installing EVA-L09's own B361 firmware. I mean, it is interesting that we have to "borrow" the B190 firmware from the Dual SIM L19 model in order to update to EMUI 5.
(I'm not the first person to find the solution. I just found out that in a Taiwanese forum a tutorial is already posted. )
So there are two steps to install B361:
1.
Install EVA-L19C636B190 via Huawei Updater
Use Custom ROM URL
Copy and paste the link to EVA-L19C636B190:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v64578/f1/
Use the HiSuite on PC to finish the installation of B190 (Set its proxy to 127.0.0.1 and the port to 41279)
2.
Repeat the previous process, but this time, replace the link with the one to EVA-L09C636B361:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73928/f1/
Again, use the HiSuite to finish the installation of B361
Note that the C636B190 version firmware for L19 model does run on L09 without the support of the L09-exclusive NFC. I think there should be a thread discussing this. Anyways, before official update comes out, the two steps above seem to be the only way to install EMUI 5 on the Asia-Pacific EVA-L09C636 version without losing data.
Click to expand...
Click to collapse
I was searching for this for months. I bought my p9 EVA-L09C636 in the US (I'm european) and I never had the chance to update, even at 4.1.1. I went crazy because I tried several times to unlock the bootloader first, installing twrp and flashing updates but with no success. It's unbelievable that I need to fake the version with huawei updater to obtain the updates for my phone. Now I've Nougat, without factory reset, with everything working, from nfc to all stock apps and services. Thank you very much
Z-Blade said:
That is interesting, I dont have a C636 but I would assume just doing step 2 without the need to flash a L19B636 would do the trick.
Click to expand...
Click to collapse
Well, in that case it keeps failing at 1%. I saw some previous posts talking about this as well.
Need Help
My model is Huawei P9 EVA-L09C636
I tried to update like this, it's started updating and got an error while updating then phone rebooted with new update,
but there's lot of errors,
Built Number displays as - NRD90M test-keys
Updater missing in settings
Camera missing
Flash Light not working
Clock missing
File Manger missing
and few more default huawei apps missing.
How do I fix it or downgrade to previous version back?
Thanks finally I was able to update my P9 to Nougat using this steps. The only difference is that there is a EVA-L09C636B190 available now so i didnt have to use the version for any other cell, I was afraid to do it. So following this steps i was able to upgrade from 168 to 190 and finally to 361 version.
My Phone is Huawei P9 EVA-L09C636
Even though my phone is L09 I've flashed L19 by following the steps on this thread -
(https://forum.xda-developers.com/mate-8/general/nxt-l09c636b521-official-firmware-guide-t3544729/)
2016.12.29 - EVA-L19C636 - EVA-L19C636B361
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1583/g104/v74666/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...ll/hw/spcseas/update_data_full_hw_spcseas.zip
it's still NRD90M test-keys. but i'm cool with it.
Works on AL00 as well?
I was wondering if I can get the most current european rom on my AL00 with that method as well?
Holy cow thank you for this tutorial.
I spent six hours following every tutorial I could find on the web and my P9 staunchly refused to install ANY update from the very next one after the one it came with all the way up to the latest!
After hours and hours of trying this method is the one that worked.
Edit: This firmware is a developer build.
There have been several updates installed since it was released.
After you this firmware it you should immediately install Huawei Firmware Finder from the Play Store and install the latest full OTA.
The developer build changes the device ID of your phone so you have to manually add the model of your phone in Firmware Finder as:
EVA-L19C636
Otherwise Firmware Finder would tell you there are no firmwares available for your model.
If you can't install the latest OTA immediately after installing this firmware, first install the next one available (38 if I recall correctly) then install the latest OTA -- 38 will say it failed to install but it actually installs just fine, then install the latest full OTA.
That will give you all the bug fixes and the security patches from Google.
Also note that this firmware works on both the dual sim and single sim models (it's built for the single sim but my device is dual sim and the sim configuration in settings works).
snjflame said:
My model is Huawei P9 EVA-L09C636
I tried to update like this, it's started updating and got an error while updating then phone rebooted with new update,
but there's lot of errors,
Built Number displays as - NRD90M test-keys
Updater missing in settings
Camera missing
Flash Light not working
Clock missing
File Manger missing
and few more default huawei apps missing.
How do I fix it or downgrade to previous version back?
Click to expand...
Click to collapse
The build number is normal.
As for the disappearing apps, it sounds like you have faulty flash storage.
That will cause files and apps to randomly disappear.
Hi all,
Having been in contact with Huawei facebook support, they have checked my imei and tell me my Mate 8 is for the Southeast Asia market - no surprise there as I bought it from eBay. So with a Mate 8 from Singapore or thereabout, how do I go about getting a uk rom on it? preferably emui 5 based? If it were a Samsung i'd just flash the normal way through odin, but I don't know with the Mate if region specifics are going to be an issue, or if i might wipe my imei or something horrific.. Is there a tut on updating an NXT-L29 'specseas' unit? I have looked!!
Sites like this http://www.carbontesla.com/2016/08/download-huawei-mate-8-b320-marshmallow-firmware-europe/ say things like 'This update should only be installed on C432 based European Mate 8 handsets'.
I'm currently on NXT-L29C636B193
Any assistance appreciated
Fred
Huawei's facebook team have come back to me saying 'The Mate 8 Build Number should be Mate 8 NXT-L29C432B192 or NXT-L09C432B192 (depends on the exact model number).' This has lead me to http://www.carbontesla.com/2016/10/download-huawei-mate-8-b192-marshmallow-update-europe/#more-9728 where I have downloaded the L29 version and copied the Update.app to my ext card as suggested. Could someone tell me if updating my phone this way is likely to cause me issues? i'm just copying off the entirety of my sd card expecting a full wipe at some point..
After forgetting everything I did yesterday I am now on build NXT-C900B192.
Where the heck do I go now??
currently installing NXT-L29C432B320 via the dload folder..
EDIT: Ok, update done and showing emui 4.1 but build NXT-C900B320. Any suggestions appreciated?
EDIT: Unlocked my bootloader and now copying NXT-L29C432B581 files over to the dload folder.. I'm starting to loose track!
Successful install of NXT-L29C636B560? yesterday then OTA updated to NXT-L29C636B563. Unfortunately the battery life has taken quite a hit, so now going to try NXT-L29C636B585 I guess!
EDIT: Using the firmware finder to download B585
EDIT: B585 installed through the firmware finder app! hopefully i wont get through the battery so quickly now!
Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Pabloh14 said:
Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Click to expand...
Click to collapse
I downloaded dc unlocker, but it doesn't support the boot loader id for PE-UL00 honor 6x. Im still waiting on huawei for the bootloader code. I think k have to log in for 14 days consecutively? I keep getting that message when I try to unlock.
Also the firmware I tried to update it was PE-UL00C00361 OTA-MF from firmware finder.
I downloaded dc phoenix unlocker. Found the correct stock firmware to the best of my knowledge and the phone back to normal. After I was able to update to marshmallow through system updates.
Thank you anyway
Has anybody got luck in finding Indian stock firmware for View 10 ? I am on Lineage OS and since it lacks a lot of features and perfection, I want to return back to Indian Stock OS.
Please help !!!
On Google play there is an app called Huawei firmware finder
On that there's 2 updates... Don't see full ota files though.
Yes I know that. In no way we can find system.img in them. I wonder how come huawei is not updating the firmware finder with their database. Looks its just intentional and similar to their tantrum when you ask a bootloader unlock code.
Maybe someone has a Stock twrp backup with the system.img for you.
That's the only option for you at the moment
Just got a response from honor
They took my info including imei
They are checking why I haven't gotten any updates
The EU honor site is checking
I'll post any help for the c675 ver
Soon as I can.
Sent from my BKL-L09 using XDA Labs
Download link - https://drive.google.com/file/d/1_Boc9uk2CwrHzBgE-ljexntxuac9GOs0/view
Unzip it and then TWRP restore. Do not flash it
Bro, I assume this is the one I got last night. I restored in TWRP, but after that, there is no sim detected. Now I'm on stock with no sim detected and imei shows null. If I try to flash twrp or custom rom now through fastboot, it says command not allowed. Please help me with getting back a stock working device.
File not extracting. it may be corrupted
I got the link from other post. There someone mentioned it worked for them except modem drivers
Well never mind.. They referred me to the India office and said they can't support this model
Wowway. Sucks worst company out there
It seems I'm on the same boat as you were. Can you tell me how you really got back from lineage OS because I really can't figure out a way to do that. Please help me out of this custom skin, oreopie!