Right, first of all, I had been waiting for a UK supplier of this product for aaaaages!
Finally MobileFun started stocking it.
As everyone knows, tempered glass protectors are for the most part, a problem for the Note 4 due to the curved edges.
I had been using one that just cover the viewing area, which looked hideous IMO.
So when I first saw iVisor and it's total, no halo coverage, I knew I needed to try it out, despite the high price of £30! (yeah, I thought I was crazy too)
In terms of packaging, there's not much to report, it's... A box [emoji23]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the box you get a cloth and suction cup to help with the installation, but I've installed so many glass protectors I didn't find it necessary to use the cup.
As you can see, this thing covers the "whole" front of the screen.
Installation of the iVisor was, in my opinion, the easiest of all the protectors I've installed.
Having the coloured edge, allows you to line everything up far easier, than a totally transparent one.
After installation and now it's been on a couple of days, I can give informed verdict on this protector.... And that verdict is, it's nothing short of amazing!
Despite the high price, in my opinion it is well worth the money, not only is it one of the thinest glass protectors I've ever come across, the clarity is phenomenal! Not to mention, the feel of thing is just like the naked glass.
I thought the ones I used in the past were good, obviously better than the PTE type, but this is a next level up.
Not forgetting THE reason I got this in the first place, which is a halo free viewing experience, which this delivers impeccably.
Yes, it is expensive, but if you're after a tempered glass protector, this has got to be the best one for the Note 4. Definitely a 10/10 from me, and if you can stomach the cost, the only one to get.
Nice thanks for sharing, is it because it has a dark border that the halo effect cannot be seen?
I'm using it as well and agree it is hands down the best one for this phone.
I disagree. Don't like the holes on the glass. Much prefer the Arcadia glass.
Note 4 Screen Protector, Arcadia(TM) Samsung Galaxy Note 4 Tempered Glass Screen Protector (Clear/Black) by Arcadia http://www.amazon.com/dp/B00RYFO53W/ref=cm_sw_r_udp_awd_7kJdvb01RJJP1
Sent from my SAMSUNG-SM-N910A using xda premium
Pics of Arcadia.
Sent from my SAMSUNG-SM-N910A using xda premium
The arcadia screen protector will cover the indicate light?!
Gesendet von meinem G3
It's all peaches & cream until the thin adhesive sides pop loose and tons of junk end up under the screen. Also a lot of cases will cause this protector to bow up in the middle and the screen will become unresponsive as there is no adhesive under the actual display area. Been there, done that.
Anyhow, nice review and good luck with the Moshi.
blackline2008 said:
The arcadia screen protector will cover the indicate light?!
Gesendet von meinem G3
Click to expand...
Click to collapse
Yes it does but I am ok with it.
Sent from my SAMSUNG-SM-N910A using xda premium
felloffthetruck said:
It's all peaches & cream until the thin adhesive sides pop loose and tons of junk end up under the screen. [emoji14] Also a lot of cases will cause this protector to bow up in the middle and the screen will become unresponsive as there is no adhesive under the actual display area. Been there, done that.
Anyhow, nice review and good luck with the Moshi.
Click to expand...
Click to collapse
I think it depends on the case, I'm using using Spigen Neo hybrid and I think it's a case of it being a mixture of luck and the way it's made, that I've managed to get it that spot on, that the case doesn't touch it, or at the very least is flush.
homer285 said:
Nice thanks for sharing, is it because it has a dark border that the halo effect cannot be seen?
Click to expand...
Click to collapse
I think that does play a part, but I don't think it's totally because of that, because I've had others that halo way before the edge of the actual display, let alone the edge of the phone.
borijess said:
I disagree. Don't like the holes on the glass. Much prefer the Arcadia glass.
Note 4 Screen Protector, Arcadia(TM) Samsung Galaxy Note 4 Tempered Glass Screen Protector (Clear/Black) by Arcadia http://www.amazon.com/dp/B00RYFO53W/ref=cm_sw_r_udp_awd_7kJdvb01RJJP1
Sent from my SAMSUNG-SM-N910A using xda premium
Click to expand...
Click to collapse
They're not holes, as in "holes", they're sections that don't have the coloured border to let the button LEDs shine through.
Trouble is getting hold of others, I tried getting all sorts but found it surprisingly difficult getting anyone to ship to the UK, including the suppliers themselves.
RavenY2K3 said:
I think it depends on the case, I'm using using Spigen Neo hybrid and I think it's a case of it being a mixture of luck and the way it's made, that I've managed to get it that spot on, that the case doesn't touch it, or at the very least is flush.
I think that does play a part, but I don't think it's totally because of that, because I've had others that halo way before the edge of the actual display, let alone the edge of the phone.
They're not holes, as in "holes", they're sections that don't have the coloured border to let the button LEDs shine through.
Trouble is getting hold of others, I tried getting all sorts but found it surprisingly difficult getting anyone to ship to the UK, including the suppliers themselves.
Click to expand...
Click to collapse
Ok i got you. I still don't like the look especially it showing the Samsung logo.
Sent from my SAMSUNG-SM-N910A using xda premium
Can i clean the moshi glass?
Looks like it will be the same price as the BodyGuardz Crown (coming the end of April for Note 4). Both look like they offer great protection. Because of the aluminum bezel, the Crown will have zero lift around the edges. Is there any lift at all with the iVisor? I think that would be a deal breaker if it does.
Chuckd610 said:
Looks like it will be the same price as the BodyGuardz Crown (coming the end of April for Note 4). Both look like they offer great protection. Because of the aluminum bezel, the Crown will have zero lift around the edges. Is there any lift at all with the iVisor? I think that would be a deal breaker if it does.
Click to expand...
Click to collapse
No lift so far, no problems with it whatsoever.
blackline2008 said:
Can i clean the moshi glass?
Click to expand...
Click to collapse
You mean the adhesive side? Probably, but I wouldn't recommend it, why would you want to remove it unless it cracked of course, but then you'd replace it?
I have a similar one arriving today. It's a Cailifu and is sold on Amazon. I will let you guys know how it looks and holds up. Here's the link to check it out:
http://www.amazon.com/gp/product/B00PXP38BA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I have been using the Cailifu glass protector for about a day now. Overall, i think it's a winner. The only negative thing I could find is, it's a smudge and fingerprint magnet. Not sure it it's the material used or some kind of coating, but I have to clean the screen far more frequently than normal. The screen coverage is perfect with no gaps or lifting around the edges. For the price (75% less than the iVisor), it's a go.
BTW, the "windows" for the capacitive buttons are square. The iVisor has round windows. The square windows give it a more stock look than the round ones. Hope this comparison helps.
RavenY2K3 said:
No lift so far, no problems with it whatsoever.
Click to expand...
Click to collapse
Having used this for a few weeks now, would you still recommend the Moshi? I've read some comments online about their iPhone protectors having an 'oil slick' effect in the centre of the screen and a 'dot pattern' that permanently marked the screen - have you noticed anything like this? I didn't see any such problems evident in your photo.
Also be very interested to know how S-Pen usage is with this. Does the S-Pen still operate the back button OK?
Kinsman-UK said:
Having used this for a few weeks now, would you still recommend the Moshi? I've read some comments online about their iPhone protectors having an 'oil slick' effect in the centre of the screen and a 'dot pattern' that permanently marked the screen - have you noticed anything like this? I didn't see any such problems evident in your photo.
Also be very interested to know how S-Pen usage is with this. Does the S-Pen still operate the back button OK?
Click to expand...
Click to collapse
No problems whatsoever, very happy with it and well worth the money IMHO.
Related
I am about to pick up a sensation.
I had a Vibrant for a year and a half and the phone even with Gorilla glass had some surface scratches.
I am looking for the following
1)I want to not deal with finger/cheek prints
2)Glare I do not care about, but it seems like most screen protectors that are anti oil are also the dithery looking anti glare ones.
Tell me what you use, and how os it on oil?
I just ordered some cheap ones from eBay. I don't know why people buy the clear protectors and deal with finger prints. Anti-glare, anti-fingerprint is the way to go.
I also ordered mine on ebay. I hate Finger Prints!!!
The reason why people buy clear protectors is because the anti glare and the clear both have a pro and con....the clear ones give u the full resolution of the screen but leaves finger prints...anti glare gives u no fingerprints but pixelizes the screen a bit
Sent From My HTC Sensation 4G
I've tried anti-glare ones from a few different sellers and the best I have found were from zydistro unfortunately they only carry mirror ones currently
They only cover the usable part of the screen but are very easy to apply and are very finger print/cheek resistant I have had mine on for over a month. Another positive thing is that the anti-glare doesn't rub off and turn into a regular screen protector like some other cheap ebay store's products have done for me.
I've gotten mine from Bestskinsever.com. The protector on my Sensation still looks great, and it's been on since I got the phone when it first came out last summer.
I first used it on my original mytouch 3g, and it lasted for about 2 years...
Sent from my HTC Sensation 4G using XDA App
Keep the replies coming, I'll check out the suggestions.
Sent from my HTC Sensation 4G using xda premium
dgwphotography said:
I've gotten mine from Bestskinsever.com. The protector on my Sensation still looks great, and it's been on since I got the phone when it first came out last summer.
I first used it on my original mytouch 3g, and it lasted for about 2 years...
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Unfortunately I can't find one for our Sensation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought mine for 7€ (6 pieces). These are the best protectors I've ever used. The screen reflections are almost gone. The good point is that you don't see your own fingerprints. And it has the best behavior when you read text as it is almost the same clear view on the screen. Other antiglare screen protectors turned white into grey or made small, rainbow-colored dots.
Don't know if you can get them in the US, cause I bought mine in Germany.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Skinomi are the best screen protectors by far, a bit difficult to put on if you've never done it before, but just go to a local car parts shop and get a 3M squeegee (rubber one that looks like a credit card size) and install it yourself. I did it last night on my sensation going from a zagg protector, this one is much more smoother when moving my finger over it, i love it.
kiwiwiwi said:
I bought mine for 7€ (6 pieces). These are the best protectors I've ever used. The screen reflections are almost gone. The good point is that you don't see your own fingerprints. And it has the best behavior when you read text as it is almost the same clear view on the screen. Other antiglare screen protectors turned white into grey or made small, rainbow-colored dots.
Don't know if you can get them in the US, cause I bought mine in Germany.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I ordered some cheap ones on ebay, will post a review when they come in.
Ov3rbyte said:
Skinomi are the best screen protectors by far, a bit difficult to put on if you've never done it before, but just go to a local car parts shop and get a 3M squeegee (rubber one that looks like a credit card size) and install it yourself. I did it last night on my sensation going from a zagg protector, this one is much more smoother when moving my finger over it, i love it.
Click to expand...
Click to collapse
They do not have any anti-glare ones on their site.
So THAT'S what they're called! I've always seen this type of screen protector, but I've never known how they were different. They were always also easier to use, as my finger would slide better, as opposed to the shiny screen protector I have now. Thanks so much! I just ordered some off eBay, hopefully they work well!
The screen protectors came in today.
Packaging: The 5 screen protectors came in an envelope with a stamp saying "pictures do not bend". Overall the packaging is not awesome but adequate. Each screen protector came in a plastic wrap and included with a cheap dry towelette thing to wipe the screen.
Installation: Overall the application went fine but I got 2 small air bubbles around the edges of the screen that I cannot get rid off due to the curved glass. I tried to warm up the screen protector with a hair dryer but it didn't help. I don't really mind because the bubbles do not affect the view-able part of the screen.
Quality: this is one of the better screen protectors(anti-glare) ones that I have tried. There is some dithering look but not too much, it seems to do well with fingerprints and glare, much better then without it.
Overall I would highly recommend these, but because they're coming from HK shipping times are long.
http://www.ebay.com/itm/5X-Anti-Gla...ssories_RL&hash=item3a71070d25#ht_2609wt_1384
Hey Calcvictim could you upload a few pics of the protector in action please.
Your favorable review, caught my attention and the price is very good...
thanks
Calcvictim said:
The screen protectors came in today.
Packaging: The 5 screen protectors came in an envelope with a stamp saying "pictures do not bend". Overall the packaging is not awesome but adequate. Each screen protector came in a plastic wrap and included with a cheap dry towelette thing to wipe the screen.
Installation: Overall the application went fine but I got 2 small air bubbles around the edges of the screen that I cannot get rid off due to the curved glass. I tried to warm up the screen protector with a hair dryer but it didn't help. I don't really mind because the bubbles do not affect the view-able part of the screen.
Quality: this is one of the better screen protectors(anti-glare) ones that I have tried. There is some dithering look but not too much, it seems to do well with fingerprints and glare, much better then without it.
Overall I would highly recommend these, but because they're coming from HK shipping times are long.
http://www.ebay.com/itm/5X-Anti-Gla...ssories_RL&hash=item3a71070d25#ht_2609wt_1384
Click to expand...
Click to collapse
Pictures as requested
Calcvictim said:
The screen protectors came in today.
Packaging: The 5 screen protectors came in an envelope with a stamp saying "pictures do not bend". Overall the packaging is not awesome but adequate. Each screen protector came in a plastic wrap and included with a cheap dry towelette thing to wipe the screen.
Installation: Overall the application went fine but I got 2 small air bubbles around the edges of the screen that I cannot get rid off due to the curved glass. I tried to warm up the screen protector with a hair dryer but it didn't help. I don't really mind because the bubbles do not affect the view-able part of the screen.
Quality: this is one of the better screen protectors(anti-glare) ones that I have tried. There is some dithering look but not too much, it seems to do well with fingerprints and glare, much better then without it.
Overall I would highly recommend these, but because they're coming from HK shipping times are long.
http://www.ebay.com/itm/5X-Anti-Gla...ssories_RL&hash=item3a71070d25#ht_2609wt_1384
Click to expand...
Click to collapse
The listing shows its for the Sensation XL?
Moon2 said:
The listing shows its for the Sensation XL?
Click to expand...
Click to collapse
I guess I linked the wrong auction, that is the seller that I got them from.
Here is a link to the Sensation ones, it comes as a pack of 4 not 5 though.
http://www.ebay.com/itm/4X-Matte-Sc...ccessories&hash=item3cbb3747e3#ht_2620wt_1384
Lexerd anti glare
http://www.amazon.com/Lexerd-Sensation-TrueVue-Anti-glare-Protector/dp/B004YKYB84
After messing around with a couple of subpar screen protectors, I got these off of amazon. The price may be a turn off for many, but to me they were worth it. Fits the curve glass just fine. Application was super easy, even comes with finger gloves to protect from finger prints. I would say the fit is 99% perfect.
Thanks for the pics Calcvictim the protector looks really good, especially for the price.
It also doesn't seem too foggy, like many anti-glare protectors.
Hiepxhop, could I also trouble you for some pics of the Lexerd protector? Many good reviews on Amazon, and I've heard good things about that brand before...
thanks!
hiepxhop said:
http://www.amazon.com/Lexerd-Sensation-TrueVue-Anti-glare-Protector/dp/B004YKYB84
After messing around with a couple of subpar screen protectors, I got these off of amazon. The price may be a turn off for many, but to me they were worth it. Fits the curve glass just fine. Application was super easy, even comes with finger gloves to protect from finger prints. I would say the fit is 99% perfect.
Click to expand...
Click to collapse
I also use the Lexerd screen protector, and it has worked out pretty well. Part of the top lifted up and lint got into it, but that shouldn't be an issue if you use a case. (I didn't at first)
Yes, there is the pixelated rainbow effect in the whites, but I find the feel of it completely worth it. If I could find a link for that German one I wouldn't mind trying it out.
Check this video out.
Someone applying a full screen protector on their Edge.
This is the type of screen protector I would be looking to put on my Edge.
http://youtu.be/ae9PUoyb6os
This should be in the Accessories thread.
but i plan to order these
http://www.amazon.com/gp/product/B00NAIYZVO/ref=gno_cart_title_0?ie=UTF8&psc=1&smid=AK9KFL3IGO3PE
There are some on ebay but im just not sure if they will fully cover the edge part.
http://www.ebay.com/itm/MPERO-Collection-Ultra-Clear-Screen-Protector-for-Samsung-Galaxy-Note-Edge/191376092296?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3D60472434fc704576883decf0dfdab04f%26pid%3D100005%26prg%3D20131003132420%26rk%3D2%26rkt%3D6%26sd%3D191387280340&rt=nc
Yeah, sorry about that.
The Amazon one would definitely cover the edge screen but eBay one doesn't. There are others on ebay that cover the entire screen.
invisiblesense said:
Yeah, sorry about that.
The Amazon one would definitely cover the edge screen but eBay one doesn't. There are others on ebay that cover the entire screen.
Click to expand...
Click to collapse
I bought the Skinomi Skintech from Amazon (about $10 shipped) and it shipped today. Hoping to get it on Monday so that I can put it on my Note Edge when it arrives on Monday as well. According to Skinomi, their screen protector will be covering the whole front screen of the Edge.
Amazon Skinomi Skintech for Samsung Galaxy Note Edge
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yea my amazon one ship. I got the tracking number so in a few days I will know
xile6 said:
This should be in the Accessories thread.
but i plan to order these
http://www.amazon.com/gp/product/B00NAIYZVO/ref=gno_cart_title_0?ie=UTF8&psc=1&smid=AK9KFL3IGO3PE
There are some on ebay but im just not sure if they will fully cover the edge part.
http://www.ebay.com/itm/MPERO-Collection-Ultra-Clear-Screen-Protector-for-Samsung-Galaxy-Note-Edge/191376092296?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3D60472434fc704576883decf0dfdab04f%26pid%3D100005%26prg%3D20131003132420%26rk%3D2%26rkt%3D6%26sd%3D191387280340&rt=nc
Click to expand...
Click to collapse
I don't see in the description where it says the one from Amazon covers the entire display.
CreekDirt said:
I don't see in the description where it says the one from Amazon covers the entire display.
Click to expand...
Click to collapse
Your right it doesnt say. I email the seller and he said it should fit 99% edge to edge since no protector can cover 100%
Also doing a 1:1of the picture and the old protectors i return it is wider and looks like it will fit.
They should be here by friday so i will know then. I dont like the other protectors since they feel all gummy and there arent any glass ones out.
Ill let you know tho.
xile6 said:
Your right it doesnt say. I email the seller and he said it should fit 99% edge to edge since no protector can cover 100%
Also doing a 1:1of the picture and the old protectors i return it is wider and looks like it will fit.
They should be here by friday so i will know then. I dont like the other protectors since they feel all gummy and there arent any glass ones out.
Ill let you know tho.
Click to expand...
Click to collapse
MIne should come tomorrow I paid for 2 day shipping 20$ ,OUCH , anyway if I get the ball's enough to put it on tomorrow i'll post some pic's and impression's , if someone beat's me to it so be it ..................
Just saw this
http://www.amazon.com/gp/aw/d/B00NAJ08YG/ref=mp_s_a_1_5?qid=1416330893&sr=8-5&pi=AC_SX110_SY165_QL70
I wonder if it will feel gummy or not.
xile6 said:
Just saw this
http://www.amazon.com/gp/aw/d/B00NAJ08YG/ref=mp_s_a_1_5?qid=1416330893&sr=8-5&pi=AC_SX110_SY165_QL70
I wonder if it will feel gummy or not.
Click to expand...
Click to collapse
Just got this one and put it on.
It feels a little gummy but not as bad as I thought it would feel.
On a side note, I tried a bunch of different protectors so far, and the Konami is the one that fits and sticks the best on the ENTIRE screen.
The ones with no solution I have tried DO NOT stick very well on the curve screen.
spridell said:
Just got this one and put it on.
It feels a little gummy but not as bad as I thought it would feel.
On a side note, I tried a bunch of different protectors so far, and the Konami is the one that fits and sticks the best on the ENTIRE screen.
The ones with no solution I have tried DO NOT stick very well on the curve screen.
Click to expand...
Click to collapse
thats good to know.
I order some Klear Cut protectors but have yet to get them. But i have a feeling i will be disapointed. The seller on amazon change there picutred and it no longer looks like it will fit.
So i then order a Skinomi which has pictured that it fit on a real device. http://www.amazon.com/gp/product/B00NAJ07QU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Just wiating for it to come in.
spridell said:
Just got this one and put it on.
It feels a little gummy but not as bad as I thought it would feel.
On a side note, I tried a bunch of different protectors so far, and the Konami is the one that fits and sticks the best on the ENTIRE screen.
The ones with no solution I have tried DO NOT stick very well on the curve screen.
Click to expand...
Click to collapse
Is ths protector is crystle clear type or it is some kind of gray ? I do not know how to describe it, some protector is very clear but esay to have finger print, some has low finger print impact but it.is not so clear.
xile6 said:
thats good to know.
I order some Klear Cut protectors but have yet to get them. But i have a feeling i will be disapointed. The seller on amazon change there picutred and it no longer looks like it will fit.
Click to expand...
Click to collapse
I ordered them too, mine should be here tomorrow so I will let u know...But I did ask the seller and they said it does completely cover the edge screen also
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
mmx6688 said:
Is ths protector is crystle clear type or it is some kind of gray ? I do not know how to describe it, some protector is very clear but esay to have finger print, some has low finger print impact but it.is not so clear.
Click to expand...
Click to collapse
clear is called clear or HD. The other one is called. Matte usually non glare type.
mmx6688 said:
Is ths protector is crystle clear type or it is some kind of gray ? I do not know how to describe it, some protector is very clear but esay to have finger print, some has low finger print impact but it.is not so clear.
Click to expand...
Click to collapse
It is clear. You cant tell its even on.
spridell said:
It is clear. You cant tell its even on.
Click to expand...
Click to collapse
Thanks. I have done some search.on the brand you use for other phone. Some review said this protector is very difficult to install, need spray and at least one hour careful work to put it on. And need time for bubble to go away. And it is not as clear as normal HD protector. I am not sure how is yours,maybe the one you get for edge is normal material and normal install?
mmx6688 said:
Thanks. I have done some search.on the brand you use for other phone. Some review said this protector is very difficult to install, need spray and at least one hour careful work to put it on. And need time for bubble to go away. And it is not as clear as normal HD protector. I am not sure how is yours,maybe the one you get for edge is normal material and normal install?
Click to expand...
Click to collapse
Took me about 3 minutes to put on.
Follow the directions and spray your hands with the solution.
YES you do need time for the bubble to go away. The instructions recommend not using the phone for 4 to 5 hours which i did. The protector
needs time to adhere to the glass.
To me it looks as clear as any normal HD protector I have ever used.
spridell said:
Took me about 3 minutes to put on.
Follow the directions and spray your hands with the solution.
YES you do need time for the bubble to go away. The instructions recommend not using the phone for 4 to 5 hours which i did. The protector
needs time to adhere to the glass.
To me it looks as clear as any normal HD protector I have ever used.
Click to expand...
Click to collapse
I see. It is good to know the detail feedback. I may go for a try.
I guess for edge screen, non of any normal material protector can work good. Only the that kind of material you bought need water to install and very thing can stick and stay.
spridell said:
Took me about 3 minutes to put on.
Follow the directions and spray your hands with the solution.
YES you do need time for the bubble to go away. The instructions recommend not using the phone for 4 to 5 hours which i did. The protector
needs time to adhere to the glass.
To me it looks as clear as any normal HD protector I have ever used.
Click to expand...
Click to collapse
Basically it's like putting tint on a car.
Mines should be in next week. They used the cheapest shipping ever.
Sent from my SM-N915T
invisiblesense said:
Check this video out.
Someone applying a full screen protector on their Edge.
This is the type of screen protector I would be looking to put on my Edge.
http://youtu.be/ae9PUoyb6os
Click to expand...
Click to collapse
Ordered 2 different protectors and they were garbage. Didn't cover entire screen so I asked my cousin in Japan to identify the protector in the video and he found them. He ordered me some and should be here at my door soon.
Pros
- Cut outs are perfect
- Doesn't interfere with spigen glass protector
- Keeps design cues from factory back
- Fair amount of grip and protection
- Texture on the sides is a plus
- Fingerprint reader works after recalibration...most of the time, as with most cases.
Cons
- Would prefer a softer/more rubber like material. It's a little harder than some tpu cases I've used.
- No amazon prime sellers.
Overall, it's a keeper.
http://www.amazon.com/gp/aw/d/B016W...1-spell&pi=AC_SX110_SY165&keywords=V10+obliqe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my VS990 using Tapatalk
I have this case and love it - it doesn't add bulk to the phone (which is great on such a large phone already).
A+ from me.
Just bought one. I'm just waiting for it to get here
Sent from my LG-H901 using Tapatalk
Hi
Sent from my GT-I9060 using Tapatalk
I agree on the con about no amazon fulfillment.
Obliq uses DHL shipping who transfers to USPS.
I had delivery issue, and Obliq's response was they have to trust their carrier. They offered me a 50% discount if I ordered again.
Amazon, would of just apologized and sent out another on at no cost to me.
Other than that, great case.
Got mine from eBay...bought on 11/05 got it today. Ridiculous
dhl->usps
Lewzephyr said:
I agree on the con about no amazon fulfillment.
Obliq uses DHL shipping who transfers to USPS.
I had delivery issue, and Obliq's response was they have to trust their carrier. They offered me a 50% discount if I ordered again.
Amazon, would of just apologized and sent out another on at no cost to me.
Other than that, great case.
Click to expand...
Click to collapse
After having prime for years, I despise ordering from anywhere else. Spoiled I guess.
Sent from my VS990 using Tapatalk
Lewzephyr said:
I agree on the con about no amazon fulfillment.
Obliq uses DHL shipping who transfers to USPS.
I had delivery issue, and Obliq's response was they have to trust their carrier. They offered me a 50% discount if I ordered again.
Amazon, would of just apologized and sent out another on at no cost to me.
Other than that, great case.
Click to expand...
Click to collapse
Same here.. They said my case got lost somewhere during the shipping process. It's almost a month now since I ordered it. I was going back and forth emailing customer service. Finally they shipped a replacement November 24. Hopefully getting it next week.
Sent from my LG-H901 using Tapatalk
Would have been better IMO if they had beveled the edges inside the 'ring' around the control buttons/camera/flash/laser assembly on the back. Most cases do that in my experience, I know the "fake" SlimArmor case I just got for my Stylo does that and it's greatly appreciated in the overall design (the real SlimArmor does it, of course). If they had beveled it down over about 1/8" that would have been pretty awesome on this Flex Pro case but it does look nice overall, might have to be something I'll consider if I get a V10 myself.
Order mine from eBay on 26 Nov...until today not yet receive it...
br0adband said:
Would have been better IMO if they had beveled the edges inside the 'ring' around the control buttons/camera/flash/laser assembly on the back. Most cases do that in my experience, I know the "fake" SlimArmor case I just got for my Stylo does that and it's greatly appreciated in the overall design (the real SlimArmor does it, of course). If they had beveled it down over about 1/8" that would have been pretty awesome on this Flex Pro case but it does look nice overall, might have to be something I'll consider if I get a V10 myself.
Click to expand...
Click to collapse
Not a fan of beveled edges personally since with the square pattern already introduced with the textured back...it would be too busy looking. The obliq design aesthetic is perfect imo in keeping with the phones original industrial modern rugged classy design intent.
I personally think that most of the cases designed overseas aren't the best looking and cheapen the look of most phones.
Sent from my LG-H901 using Tapatalk
I have 5 cases (including 2 different Spigen) & this ones is hands down the best case available IMHO.
~John
dinged said:
Not a fan of beveled edges personally since with the square pattern already introduced with the textured back...it would be too busy looking. The obliq design aesthetic is perfect imo in keeping with the phones original industrial modern rugged classy design intent.
I personally think that most of the cases designed overseas aren't the best looking and cheapen the look of most phones.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I hope you understand that what I mean by making the area around the volume/power buttons beveled means it's sloped inward and down to make it easier to access the buttons - it has nothing to do with any other aspects of the case itself, just that one area, beveled inward towards the volume/power buttons so the fingertips can reach the buttons as well as the fingerprint reader easier that a hard edge. Like this:
br0adband said:
I hope you understand that what I mean by making the area around the volume/power buttons beveled means it's sloped inward and down to make it easier to access the buttons - it has nothing to do with any other aspects of the case itself, just that one area, beveled inward towards the volume/power buttons so the fingertips can reach the buttons as well as the fingerprint reader easier that a hard edge. Like this:
Click to expand...
Click to collapse
Yes I understand exactly what you mean.
Looking at the picture below of the obliq. Non beveled edges are preferred since I believe beveled edges would look distasteful and not look of the proper line thickness when compared to the other line elements of the design. In it's current state, the look is perfectly balanced and edges flow with all lines.
Add to that....If adding beveled edges...they would have to decide to what? The lens/buttons; buttons only; combine all three cutouts into one large beveled cross looking cutout (like what spigen and many others decided)? All the choices would have thrown off the balanced look of design.
Unfortunately, the companies that have implemented beveled edges are forced to include the laser, flash and sensor cutouts into one because of the limited clearance between them and the camera. Look at the picture below.
Here are the issues I have with beveled edges and the issues introduced by them with another case manufacturer that took that route..(1) beveled edges add visual cues that are wider(2x to 3x the thickness) than other lines of phone, (2) 3 cutouts combined into 1make it look like those ugly "tough cases" with huge design elements and (3) the gap between lens and sensors show the oem texture vs the case texture.
Sent from my LG-H901 using Tapatalk
I ordered this case from amazon prime. It was listed as prime shipping but took a good 10 days before delivery. Also, finger print scanner will not work for me with case installed. Tried to re-calibrate sensor and can't even get it to do that. The fit is nice and slim but pointless for me if fingerprint scanner does not work.
dinged said:
*snip*
Click to expand...
Click to collapse
You're overthinking that in the extremes, seriously.
The point being making the buttons easier to access and manipulate would be possible with a slightly beveled edge around the inner portion of that part of the case, it's not that difficult to grasp. No reason to bevel anything else on the case: not around the flash, not around the laser lens, not even around the camera housing itself, just that one small portion that makes the "U" shape surrounding the power and volume buttons.
If I get this case and a V10 I assure you I'll be taking a razor blade or X-Acto knife or even a scalpel and beveling out that "U" because it'll help.
br0adband said:
You're overthinking that in the extremes, seriously.
The point being making the buttons easier to access and manipulate would be possible with a slightly beveled edge around the inner portion of that part of the case, it's not that difficult to grasp. No reason to bevel anything else on the case: not around the flash, not around the laser lens, not even around the camera housing itself, just that one small portion that makes the "U" shape surrounding the power and volume buttons.
If I get this case and a V10 I assure you I'll be taking a razor blade or X-Acto knife or even a scalpel and beveling out that "U" because it'll help.
Click to expand...
Click to collapse
I know. It's an ocd issue I have with analysis, software design and the review process. My work skills carry over to something simple as a insignificant case review.
By the way, the thought of modding with a scalpel kills me. Haha
atcjeff said:
I ordered this case from amazon prime. It was listed as prime shipping but took a good 10 days before delivery. Also, finger print scanner will not work for me with case installed. Tried to re-calibrate sensor and can't even get it to do that. The fit is nice and slim but pointless for me if fingerprint scanner does not work.
Click to expand...
Click to collapse
To get the fingerprint scanner working be sure your finger makes contact with pad and the metal ring around pad.
Sent from my LG-H901 using Tapatalk
Btw, if anyone wants mine lmk pay me $5 aand keep it,didn't help me one bit
dinged said:
I know. It's an ocd issue I have with analysis, software design and the review process. My work skills carry over to something simple as a insignificant case review.
By the way, the thought of modding with a scalpel kills me. Haha
To get the fingerprint scanner working be sure your finger makes contact with pad and the metal ring around pad.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I realize that, and no matter how many times I would try, it would not unlock. Take case off and it unlocks. Would not re-calibrate with case on either. I should mention I am on T-Mobile and no update for sensor
To gather options here for U12+ glass/plastic screen and back protectors.
Currently I have this one ordered for back film:
https://www.aliexpress.com/item/Fro...r-For-HTC-U12-Plus-U12-Cover/32881487671.html
And this for the front:
https://www.ebay.com/itm/HTC-U12-Pl...-Schutzglas-Tempered-Schutzfolie/263708198830
It will be much relief to have these applied. Need to handle the phone with care till at least the front glass arrives...
I'm trying these out because they're the only non-glass, dry install protectors I could find.
https://www.amazon.com/gp/product/B07C8HP8FM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So the front tgsp is here. I can't recommend it because it's not well sized on top and bottom. No Halo, because this u12 panel is less curved than u11 was, it's flat.
It's all transparent and fully glued. Application was easy cause it didn't fit an exact match on top.
Usual glass feeling to it.
I'll keep it because it's without Halo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How about Skinomi?
It's an off brand, but was the only one I found when I had a HTC 10. It was pretty great quality all body protection. Bestskinsever is normally my go to, but since they sometimes done have any skins Skinomi has been my second
All glass screen protector should work since the screen is flat. I ordered from Mr. Shield since I used for my Android Pad.
Sent from my BKL-L04 using Tapatalk
I found this screen protector on amazon:
https://www.amazon.de/dp/B07CRVB2VC...olid=2BBLC2HN0SPDW&psc=0&ref_=lv_ov_lig_dp_it
It says: Especially for curved displays
What do u think of this screen protector?
x1tymez said:
All glass screen protector should work since the screen is flat. I ordered from Mr. Shield since I used for my Android Pad.
Sent from my BKL-L04 using Tapatalk
Click to expand...
Click to collapse
Thats the one I ordered and its fits fine.
Defective Dave said:
Thats the one I ordered and its fits fine.
Click to expand...
Click to collapse
I ordered different brand. Mr. Shield, the side is little smaller and for some reason the bottom don't stick. Not deal breaker, but nice to others.
Sent from my HTC U12+ using Tapatalk
This looks great! But it's pretty expensive with shippingcosts to the Netherlands.
Sent from my HTC U12+ using XDA Labs
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
hey I have even more posts, but not as much thanks like he does but also not living in the USA
DeeZZ_NuuZZ said:
hey I have even more posts, but not as much thanks like he does but also not living in the USA
Click to expand...
Click to collapse
Also I already got mine slapped up with a cheapo from China, and don't want to risk another nervous break down while applying a new film or skin
PhantomSkinz Guru said:
Yes shipping a package internationally with tracking is quite expensive. It actually costs us even more than what we charge our customers because we choose to insure our international shipments. That being said, we do offer free international shipping on orders $69.95 and up. I know that is a lot, but if you put together an order with a few friends or family members, that would save you quite a bit on the shipping costs.
We used to send shipments as letters as some of our competitors do which is much cheaper, but that isn't really possible when including application gel and the percentage of lost shipments was MUCH higher in that scenario. We feel that it is more important that customers can track their orders and that a much closer to 100% of our orders are actually delivered.
Click to expand...
Click to collapse
Thanks for your reply. Okay, I've just placed an order for 3 HTC u12+ skins, because Dbrand doesn't make them haha. And because I got 10% off and get free shipping.
Hope to have them soon!
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
I wasn't able to send a PM for some reason but I would love to try the ultra clean full body since I'm using a fitbag for my only protection now. I can't find any cases I'm interested in yet. I will make sure to give a full review. Thank you for the offer.
When I had my U11 protected with full body protector it would no longer fit properly in my U11 leather fitbag, since the fitbag is made perfectly for a naked phone but the U12+ is a tad smaller than the U11. The U12+ fits nicely in my U11 fitbag but it doesn't fit as snug as a bare naked U11. A bare naked U11 fit perfectly in the fitbag and whenever you slide it out, it would clean both front and back of the phone making it look great.
My point is, I would bet the @PhantomSkinz Guru for the U12+ would combine very nice with the U11 leather fitbag. I bet it would snug it up just perfect like it does for my U11.
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
Shame I don't quite meet the criteria in the UK with only <400 posts.
I've tried this:
https://smile.amazon.com/gp/product/B07BXFR12Z/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07D2BYYJN/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Both are garbage because neither completely covers the screen (each side is slightly thinner than the width of the screen) and BOTH will not stick down on 2 or 3 of the edges.
I have this:
https://smile.amazon.com/gp/product/B07CKMBJ98/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07CPQ3XJM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
coming tomorrow. I'm leery of Orzero due to the negative reviews of their product for another flat-screened, bezeless phone, the Essential PH-1 but I bought it because it specifically states that the entire protector has adhesive, not just the black edges. If neither of these work, I'm going Skinomi.
PhantomSkinz Guru said:
Yes the Ultra Clear skinz are about 8 mils (0.2mm) thick. So you can double that thickness to account for each side being covered. It will definitely make the fit a little more snug. However sliding it in and out of a tight fitting pouch many times a day may cause the skin to peel up? Suppose it depends how tight the fit bag is.
We'll PM you for your shipping details for the review kit
Click to expand...
Click to collapse
Yes thank you very much I'm really looking forward to applying these. I bet they will work great with my FitBag and if they do peel up it will probably get enough use before doing so and still be worth it to order new. We will see and I will post pics and thoughts. Thanks again!
holz75 said:
I'm trying these out because they're the only non-glass, dry install protectors I could find.
https://www.amazon.com/gp/product/B07C8HP8FM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Those were terrible, but these Supershieldz are great, especially if you prefer film over glass.
https://www.amazon.com/gp/product/B07DT497ZQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
PhantomSkinz Guru said:
No problem We are going to send you a "glass only" back skin as well so you can choose which you like better. The glass only will certainly be easier to install and may be less prone to peeling in your situation.
Click to expand...
Click to collapse
Awesome thank you.
My HTC U11 Fitbag only fit properly bare naked. Once I put a screen protector and back protector on it, it was too tight. The U12+ fits nicely in my U11 Fitbag but it's not tight enough, I think applying these will make the U11 Fitbag fit the U12+ as if it was made for it.
If it doesn't work out I will stop using the FitBag. I just want a bare looking phone with these great protector's. I would hate to get a single scratch on this beauty :laugh:
OGhoul said:
I've tried this:
https://smile.amazon.com/gp/product/B07BXFR12Z/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07D2BYYJN/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Both are garbage because neither completely covers the screen (each side is slightly thinner than the width of the screen) and BOTH will not stick down on 2 or 3 of the edges.
I have this:
https://smile.amazon.com/gp/product/B07CKMBJ98/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07CPQ3XJM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
coming tomorrow. I'm leery of Orzero due to the negative reviews of their product for another flat-screened, bezeless phone, the Essential PH-1 but I bought it because it specifically states that the entire protector has adhesive, not just the black edges. If neither of these work, I'm going Skinomi.
Click to expand...
Click to collapse
So here's the sad state of affairs for tempered glass screen protectors for the U12 Plus. Do you want to protect just the screen, or the entire phone?
Because you can't do both.
You can use a glass screen protector, but you'll have to either deal with the screen protector not actually covering your screen, or you can get a 'case friendly' full coverage screen protector that is, infact, not case friendly.
Or you can use a case and a plastic screen protector, as I am going to do. The fact of the matter is until a name brand company decides to make a glass screen protector that actually fits and adheres to the U12 Plus, none of these cheap chinese glass screen protectors are worth a dime of your money. It cost me $40+ to figure that out.
The Orzero screen protector completely covered the flat glass surface of the front of the phone, however you can't get rid of the airgaps where the black part gives way to the clear glass. Then, when you put the case on, it immediately lifts the screen protector.
The Katain had more rounded corners so I was hopeful, but again, immediate lift and I have a bubble at the edge of the clear and black that will not go away.
Reading other threads there seem to be ongoing issues with tempered glass protectors for the Pixel 4 XL. The slight curve of the glass at the sides seems to be the problem. With other curved phones I've had success with glass that I've adhered using some UV activated adhesive. Does anyone know if there are any such products out there or if anyone is planning to sell these? I've looked, but I can't find any.
I'm currently living with a protector that doesn't quite cover the screen. Not ideal!
magnatom said:
Reading other threads there seem to be ongoing issues with tempered glass protectors for the Pixel 4 XL. The slight curve of the glass at the sides seems to be the problem. With other curved phones I've had success with glass that I've adhered using some UV activated adhesive. Does anyone know if there are any such products out there or if anyone is planning to sell these? I've looked, but I can't find any.
I'm currently living with a protector that doesn't quite cover the screen. Not ideal!
Click to expand...
Click to collapse
No one is doing one yet. Demand doesn't seem to be there since the curve is less extreme as previous Pixels and the cheap protectors are good enough.
ilal2ielli said:
No one is doing one yet. Demand doesn't seem to be there since the curve is less extreme as previous Pixels and the cheap protectors are good enough.
Click to expand...
Click to collapse
Yes, it would seem that no-one is producing one yet. A big shame considering that all of the current protectors have issues.
magnatom said:
Yes, it would seem that no-one is producing one yet. A big shame considering that all of the current protectors have issues.
Click to expand...
Click to collapse
No issues here with my screen protector. I've had it on since October 28.
https://www.amazon.com/dp/B07WHN62XS?ref=ppx_pop_mob_ap_share
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 4 XL using Tapatalk
EeZeEpEe said:
No issues here with my screen protector. I've had it on since October 28.
https://www.amazon.com/dp/B07WHN62XS?ref=ppx_pop_mob_ap_share
Click to expand...
Click to collapse
looks like something chewed the top of the phone lol it's so ugly and look at all that dust.
ceelos218 said:
looks like something chewed the top of the phone lol it's so ugly and look at all that dust.
Click to expand...
Click to collapse
Honestly, it's the angle and the strong sunlight that showing the dust. It's not really noticable in real life. Also, it might have a "chewed top" but it's stays on just fine.
Sent from my Pixel 4 XL using Tapatalk
EeZeEpEe said:
Honestly, it's the angle and the strong sunlight that showing the dust. It's not really noticable in real life. Also, it might have a "chewed top" but it's stays on just fine.
Click to expand...
Click to collapse
going to give intelliglass a try.. it just looks nicer
ceelos218 said:
going to give intelliglass a try.. it just looks nicer
Click to expand...
Click to collapse
It looks nice but $20 for 2 is a rip-off when I got 3 for $4.
Sent from my Pixel 4 XL using Tapatalk
EeZeEpEe said:
It looks nice but $20 for 2 is a rip-off when I got 3 for $4.
Click to expand...
Click to collapse
paid 10 for 2 but yes agree there's cheaper alternatives. I just received them but I'm not liking the side bars. it blocks some of the screen. I might have to wait for the final product or get the omoton brand.
ceelos218 said:
paid 10 for 2 but yes agree there's cheaper alternatives. I just received them but I'm not liking the side bars. it blocks some of the screen. I might have to wait for the final product or get the omoton brand.
Click to expand...
Click to collapse
I'm curious as to which one is in this YouTube video.
Sent from my Pixel 4 XL using Tapatalk
https://www.amazon.com/dp/B07XXMRVLG/ref=cm_sw_r_other_apa_i_ugp-DbFMYC0PF
Maybe it's this one?
Sent from my Pixel 4 XL using Tapatalk
ceelos218 said:
going to give intelliglass a try.. it just looks nicer
Click to expand...
Click to collapse
It's not from intelliglass, it is DDJ brand from Amazon.
dreamcell said:
It's not from intelliglass, it is DDJ brand from Amazon.
Click to expand...
Click to collapse
I know.. didn't mean that one. the one from the other thread.
I've been using this one and have had no issues. Cutout for speaker and selfie camera. It comes with a case and 2 screen protectors. No dot matrix or rainbow effect. Soli works fine and it doesn't interfere with gestures. Does require you to spread a liquid around the edges with a brush. No peeling up and no dust.
EJBOTH Screen Protector for... https://www.amazon.com/dp/B07Y8FG6Z1?ref=ppx_pop_mob_ap_share
I tried a few. Right now the Zagg tempered glass has been the best, but its not cheap. The cheap OMOTON for $10 from Amazon was ok, but I had issues with sensitivity on some of the edges with that one that didn't happen with the Zagg.
edit: I have been following the Intelliglass thread as I was interested in their product originally, but I would steer clear away until they get their act together. While the XDA forum guy seems to be trying hard, the company can't seem to ship a product worth buying right now. Dot matrix shipped by accident, and now replacements don't have adhesive in all the right places, etc. Folks over there are not happy.
I'm using my Zagg until Whitestone does something, but really, the Zagg is probably good enough.
chriskwarren said:
I tried a few. Right now the Zagg tempered glass has been the best, but its not cheap. The cheap OMOTON for $10 from Amazon was ok, but I had issues with sensitivity on some of the edges with that one that didn't happen with the Zagg.
edit: I have been following the Intelliglass thread as I was interested in their product originally, but I would steer clear away until they get their act together. While the XDA forum guy seems to be trying hard, the company can't seem to ship a product worth buying right now. Dot matrix shipped by accident, and now replacements don't have adhesive in all the right places, etc. Folks over there are not happy.
I'm using my Zagg until Whitestone does something, but really, the Zagg is probably good enough.
Click to expand...
Click to collapse
Can we get some pics?
chriskwarren said:
I tried a few. Right now the Zagg tempered glass has been the best, but its not cheap. The cheap OMOTON for $10 from Amazon was ok, but I had issues with sensitivity on some of the edges with that one that didn't happen with the Zagg.
edit: I have been following the Intelliglass thread as I was interested in their product originally, but I would steer clear away until they get their act together. While the XDA forum guy seems to be trying hard, the company can't seem to ship a product worth buying right now. Dot matrix shipped by accident, and now replacements don't have adhesive in all the right places, etc. Folks over there are not happy.
I'm using my Zagg until Whitestone does something, but really, the Zagg is probably good enough.
Click to expand...
Click to collapse
Yeah I'd stay away from intelliarmor. Dealt with their stuff during the Nexus 6P days and they still haven't gotten their stuff together.
ocbooger said:
I've been using this one and have had no issues. Cutout for speaker and selfie camera. It comes with a case and 2 screen protectors. No dot matrix or rainbow effect. Soli works fine and it doesn't interfere with gestures. Does require you to spread a liquid around the edges with a brush. No peeling up and no dust.
EJBOTH Screen Protector for... https://www.amazon.com/dp/B07Y8FG6Z1?ref=ppx_pop_mob_ap_share
Click to expand...
Click to collapse
Interesting to see a manufacturer finally put that into practice. Since the edges lift and they're essentially having you fill the gap in between the screen protector and the glass with a liquid. Some people do that already with WD40 or olive oil.
Thanks for all the replies (been busy so not had a chance to respond). The EJBOTH Screen Protector looks interesting and looks like it extends beyond the visible screen, which is important for me. I've bought one of those (coming to UK, so won't be here until Jan 9th). I'll let you know how I get on.
ceelos218 said:
going to give intelliglass a try.. it just looks nicer
Click to expand...
Click to collapse
are this full glue. also is it cover abit screen?