Hi all as title states my moto g is downloading the new 5.0 update but during install it says error and switches phone back on with no changes made. It was rooted and custom firmware was installed. Since then uts back to fully unrooted, stock recovery is reinstalled and bootloader is still unlocked. However still it errors a quarter into installing.
So i have come to the assumption that it is best for me to revert/ reinstall the stock 4.4.4 rom back on and try updating after that. However seen loads of complicated methods on how to reinstall the stock firmware onto my phone so want the easiest way if possible.
In attatchments is the info from the current stock rom that is on the phone (will state a custom rom has never been installed to the phone always been stock) and i have downloaded the following to put onto it:
XT1032_RETAIL-GB_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip
Ive tried using the mototools v3.1 and does abserlitly nothing non of the commants work or do anything with my phone.
So which is the easiest method?
Many Thanks
major problems!!!!!
Stock recovery installed to phone. Started update it was installing and got to 3/4 of the way through, errored, restarted and not goes in a loop saying no command!
Phone will not switch on!!!
Why has this happened?
If fastboot is too convoluted - using a custom recovery, flash one of these zips:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
What update were you installing when it errored?
Related
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:
Hello! Recently purchased a used (but like new) S Relay off of Ebay. It came with 4.1.2 already installed.
Basically let me tell you a brief backstory: I started off by installing Custom Recovery (CWM PhilZ 6.07) using ODIN and backing a NANDroid Backup. Then flashed KitKat CM 11 from CWM (wanted to try it out but didn't like it more than Jellybean). So I restored my backup via custom recovery.
Then I tried unlocking the sim network from T-mobile so I can use this phone when I travel abroad (using the method in http://forum.xda-developers.com/showthread.php?t=2255892 ). But apparently I found this doesn't work except on the stock Ice Cream Sandwich rom. So I flashed the LH1 stock rom using ODIN. Then I did the unlock method and it appeared successful. (it recognized an AT&T sim I have without asking for an unlock code)
So long story short, I used the custom recovery again to restore to my stock version of 4.1.2 Jellybean. But my baseband version is still LH1. I want to update it to UVMA2. I tried using a zip to update it from LH1 to UVMA2. But it always fails and aborts. It gives me Error Status 7. Which from google apparently means the device name doesn't match the one on the zip package.
I also try installing other minor packages. Which all incur the same error 7. So I'm not really sure if I'm just a really stupid beginner. Or if I've messed something up when I went to Kitkat and back. Or perhaps when I downgraded to 4.0 to unlock the network....
I tried using this ( http://forum.xda-developers.com/showthread.php?t=2302599 ) guide to fix the packages by removing the initial device name check. Yet it still fails/aborts before trying to install.
Any help or insights for this beginner would be greatly appreciated, thank you
Edit: The device name should be "apexqtmo" apparently...
Was able to flash to UVBMC5 baseband. Is that perhaps the latest version? It appears to be one of the most recent from google.
If this was already answered in another thread please link me.
So, i have a Moto G Dual-SIM Retail on 4.4.2 and i've been noticing some minor bugs, but i think the OTA updates would be able to solve it for me. But on the other hand, my device is rooted and i have quite a lot of things (XPosed Modules and etc) on it, as well as a custom recovery (I think it is CWM). How do i update, only gotta restore stock recovery and update normally via OTA? No need to reset anything? Root will remain along with my Xposed Modules?
Thanks in advance.
You need stock recovery (some have reported that philz recovery also works) and stock kernel with stock modules. Root remains. You just need to reinstall xposed framework from installer. Modules remain.
Quick way is flash 4.4.3 vesion for Bazil utmsds ( for dual sim).
Sent from my XT1033 using Tapatalk 4
Where can i get the stock recovery and how to flash it? Currently using PhilZ but it doesn't let me do the OTA update.
And there's a thread on this section that shows how to restore stock firmware, but i'm already running it and would not wan't to wipe out the phone or anything just to update.
Thanks anyway guys!
PS: Now that i tried this without success, phone goes on rebooting to Philz Recovery after a while in attempt to update (and fails everytime of course)
EDIT again: Done it by getting recovery.img from stock firmware and flashing via fastboot (Android SDK), but now getting error while phone tries to update and when it boots get "update unsuccessful" warning.
Because u use Xposed and some module. Best way u should use Titanium Backup, backup all you apps,after that,use Root Explore ,copy whole sdcard to yr PC, flash stock 4.4.3,root and copy back all detail to sdcard, use Titan backup all apps lost and all data. Done. If not ,u still have to unroot,uninstall Xposed with all module, i mean must do yr phone like stock rom,and update it.
Sent from my XT1033 using Tapatalk 4
Hi,
I wonder if anyone could offer me a little assistance please ? I have a UK Tesco Moto G 16GB (2013) that I have successfully unlocked the bootloader and rooted and CWM recovery installed. Currently, it's running 4.4.4 Kitkat. I gave up with the OTA update as I was getting the 'preflash validation failed' message. More recently, I have tried following the guide on here to flash the XT1032_GPE_5.1_Optimized_v1.1.zip file using CWM. However, this resulted in what I believe is termed a bootloop - i.e. the coloured dots animation just never stopped - I waited half an hour and it was still going.
I've managed to restore it back to my previous 4.4.4 for the moment, but I would like to move to Lollipop at some point - if I could !
Could someone suggest a method I could try please ?
Many thanks !
Kev.
Hi there.
Well, my device is a XT1032 Retail US but I may have been through the problems you're facing right now.
Here we go:
Go full stock (don't know if you revocer from a backup or already did this but in any case you'd know what to do: This guide helped me a lot. http://forum.xda-developers.com/showthread.php?t=2542219.
Do not install any official update using a custom recovery
Make sure you got the actual latest recovery version. If you went stock from the latest firmware you should have already got it.
If you have your OTA, Install it manually from the stock recovery
This method should work. It is the one I followed.
I got two errors: 1st was because was using custom recovery.
2nd was because my rom was stock but had deleted system apps, so the install failed always at some point.
Once I flashed the latest stock firmware including the stock recovery, I was able to install my OTA update.
Let me know if this works.
Hi, my friends dad purchased a galaxy s5 (scl23 - sm900j, running 4.4.2 )from some website and its performance has been atrocious. Me and my friend have attempted to install a custom rom but have ran into issues. At first we tried to flash twrp through odin but that failed so then we tried to install twrp through twrp manager (we gained root through towel root). The main problem happened when he rebooted into the bootloader/recovery screen where he got the "could not do normal boot" message. Google says that to resolve this you flash the stock rom, so we tried googling for that but not even sammobile has the 900j stock rom. Does anyone any way to fix the problem/ what/where the 900j rom is?
edit: i think i might have found it, using SCL23 brings up results even though 900J doesnt.
follow up question: say we are able to boot back to stock rom, are there any tailored guides for the 900J on how to flash?