sorry if this is the wrong section.
My problem is complicated. So i was trying to flash my first rom ever on my lg g2 vs980. The rom was Rashed's unofficial CM 12. So i was on twrp 2.7 but i tried to update to 2.8.5.1 i think it was. After doing this i also flashed the EFS backup final.zip file (i was following a youtube tut). then i flashed my radio.zip and su.zip. I was going make another backup after doing this but then it said backup failed and i think it wiped my phones storage so i decided to just flash cm 12.zip (i didnt wipe or factory reset anything myself). So the phone boots the the cyanogen boot logo and it said "upgrading android" and below it said something like "configuring apps". Then it changed to a blue screen and rebooted. Eventually it booted to "cm 12" and for a split second i can see whats supposed to be to be on the screen, but then it turns black besides the battery, time, and back button. Help?
Related
Ok I have a massive problem here. Last night I decided to use the 1 click universal root app to root my phone and flash it to get CM.
I downloaded the app did the root, downloaded clockworkmod then did a clockworkmod recovery. After that finished i was given a pre-root option to backup my phone and wipe data/storage.
I only chose back up my phone. My nexus one then rebooted and proceeded to backup my phone then it went to install CM 6 RC2.. After this had finished it then rebooted and went to the multicoloured animation where the colours ceom from the left and right..
Here it would continuously loop and never do anythign else. With this I pulled the battery and loaded into recovery where I was in ClockworkMod. I then proceeded to use the recovery and as it was doing the recovery it just froze and the progress bar nor any words would come up.
From here I pulled the battery again did a soft/hard reset but it would hang on the loading animation again. I then did a wipe data/clean option and now it just hangs on the X logo.
On my sdcard I still have the clockworkmod folder with the backup, nandroid, system and all the other files as well. Vodafone Australia have no stock of the Nexus One at all and won't be getting anymore in since it's a finished product
I barely have any cash for a new phone and need to know asap what to do to fix this problem! If anyone can help!
When you installed Cyanogen CM6 did you install the proper baseband also or you just didn't write it down for us? If you had 2.2 on the phone before you rooted the baseband is ok for CM6.
Did you try hooking your phone with USB and try if ADB interface works? If your computer sees the phone via fastboot?
IF fastboot works, you could always restore your stock recovery and install a stock FRF91. (And then try again with CM6, this time installing the proper baseband AND WIPING like you should when installing CM6!!)
When installing custom ROMs always read the install instructions whole first then install.
http://forum.cyanogenmod.com/topic/...y-crap-its-full-of-awesome-v600-rc2-07252010/
Hi all,
not sure why this predicament is happening to me, but currently I can't push any custom rom to my photon Q...
0. I installed a millions of ROMs and know how to do and using TWRP 2.6
1. Yesterday I experienced several File I/O errors during installing Pac-man ROM.
2. after TWRP full format, Installation was okay and it was also bootable, you can set up your phone just like everyday, but you cannot reboot... stuck in the moto logo everytime you reboot, and I had to RSD/FXZ restore :crying:
3. Nothing can bring this phone back with TWRP, Only RSD / FXZ restore can save the situation...
4. a stock ROM of FXZ seems okay and normally reboot, but I went back to #2, but in vain...
Any clue? My phone's flash simply borked?
palmwangja said:
Hi all,
not sure why this predicament is happening to me, but currently I can't push any custom rom to my photon Q...
0. I installed a millions of ROMs and know how to do and using TWRP 2.6
1. Yesterday I experienced several File I/O errors during installing Pac-man ROM.
2. after TWRP full format, Installation was okay and it was also bootable, you can set up your phone just like everyday, but you cannot reboot... stuck in the moto logo everytime you reboot, and I had to RSD/FXZ restore :crying:
3. Nothing can bring this phone back with TWRP, Only RSD / FXZ restore can save the situation...
4. a stock ROM of FXZ seems okay and normally reboot, but I went back to #2, but in vain...
Any clue? My phone's flash simply borked?
Click to expand...
Click to collapse
yes,i have the same problem,i try a lot times.
use cwmrecovery,it will solve all
Try CWM or Open Recovery. Try also installing custom rom from internal storage.
Thanks for the input, but neither CWM nor open recovery helped a lot after each tests, unfortunately exactly the same problem.
Only the first boot was possible with the first custom ROM right after RSD recovery.
This is extremely weird and I don't understand what this situation means.
Stock ROM looks okay since I can restore from the TWRP backup, but no other roms were recoverable from my last backups none the less flesh installation... stuck in the red moto logo, not even in the boot screen...
palmwangja said:
Thanks for the input, but neither CWM nor open recovery helped a lot after each tests, unfortunately exactly the same problem.
Only the first boot was possible with the first custom ROM right after RSD recovery.
This is extremely weird and I don't understand what this situation means.
Stock ROM looks okay since I can restore from the TWRP backup, but no other roms were recoverable from my last backups none the less flesh installation... stuck in the red moto logo, not even in the boot screen...
Click to expand...
Click to collapse
Try to remove sdcard and see if phone boots normaly without it.
What is "twrp full format"?
Thanks,
suddenly all got back to normal. I simply don't know what happened and what I have missed. maybe I have been too jittery to wait for a boot time ?
If anyone happened to have experienced any of my symptom, just wait for another min to diagnose something !
BTW, when I refer to 'twrp full format', I meant there was a format menu inside TWRP wipe section.
Phone: LG Spectrum
ROM: Cyanogen 10.1 3 or something
CWM: 6.0.4.7
I was in the process of manually installing CWM Touch via Rashr Flash Tool to replace an old 6.0.1.1 non-touch version i had on it before, and when I successfully got it installed, the app asked if I wanted to reboot into recovery. So I pressed yes, and it did.
Unfortunately, it never seemed to remove it afterwards because after every single reboot, it kept going back to recovery, not loading the android OS.
I've tried the following with no success:
Clearing data factory reset
Clearing cache
Clearing Dalvik cache
Full restore to V6 stock
Full restore to Cyanogen (I made a backup when I first got to CWM Touch)
This is the current behavior of my phone:
When powered on, it will display the LG logo, then it will flicker to black and then fade in the LG logo again, 5 seconds later recovery boots. If phone was off and you insert USB cable to charge, the LG logo appears, but the battery mode sort of screen never comes after. Its just stays at the LG logo, and never turns off the display.
It will keep rebooting to recovery no matter if I even tell the recovery to reboot to bootloader.
I don't know exactly how the bootup structure is for androids but the only thing I can think of that may be the issue is the recovery itself if it wasn't the app that caused this. It just doesn't make sense that after a full restore, it would still have an issue, other than the recovery itself, UNLESS there is some secret boot instruction file that's stuck with a "Reboot_to_Recovery = 1" parameter.
Since this thing is stuck in a recovery boot, how would I be able to manually, without OS access, reflash another version of CWM on the device? Or if there's another possible way to fix this, please help me.
Maybe the ROM hasn't flashed on your phone properly .try again with a clean flash. may help
HiT Thank$ If HelPed
I believe this is independent of the ROM. I had noticed in preparing to flash a new ROM that instead of restarting to the OS, it restarted to the recovery. I didn't take much note of this, but it was clear that this problem began when I flashed the new recovery. Also, the fact that I had used 2 seperate, very different restores (full restores) with no success means that it couldn't have been the ROM.
My only probably clue right now is that the recovery is to blame (which is weird since CWM notes 6.0.4.7 as compatible with LG Spectrum. I had 6.0.1.1 before with no issue). I have no idea how to change this recovery however, given that I can't even boot the OS at all, and there doesn't seem to be a "flash recovery' option in recovery (which is kinda annoying).
I searched the forums before posting. 73 results came up and I read through and followed instructions of 7 different posts that seemed similar to mine (including the ones that appear when making a new thread), but nothing has worked or I haven't found a situation like mine.
Hi.
I have a HUGE problem and need help.
I was on Cyanogen OS 12.1 and decided to install the latest Cyanogen OS 13.1. I downloaded the flashable zip. Booted into TWRP recovery and installed the zip file. I had always allowed my phone to reinstall Super SU in the past with great succes, but it seems I shouldn't have done that according to someone in Oneplus forums. Now my phone is stuck on the bootup animation that says "Cyanogen MOD ready". I also cannot boot into the recovery or safe mode using hardware keys. Please help! I don't want to lose my phone or my data!
Thanks for any advice.
note: I used the signed flashable zip from here.
EDIT: I was able to boot into recovery using the command "fastboot boot recovery.img". I cleared dalvik cache and flashed COS 13.1 zip. Currently waiting for phone to boot. Hope it doesn't get stuck on the bootup screen again.
EDIT2: It looks like my phone has booted successfully and is now optimizing apps for COS update! If I don't follow up, it means everything worked out great again!
EDIT 3: My phone finished "optimizing" apps. I thought it would take me to my launcher as all other times I've updated. To my surprise, the phone seemed to reboot and was stuck on the "splash screen" (Cyanogen MOD ready). After that, I got the "Android is starting" "Optimizing app xx of xxx" message again, which is incredibly weird and I think my phone might be in a bootloop. PLEASE HELP!
EDIT 4: I remembered that I did a nandroid backup last February so I restored it with "restore" in TWRP. My phone has been stuck on the "Cyanogen" boot screen for about 40 minutes. I'm lost.
To recap everything:
1. I was trying to manually upgrade from COS 12.1 to COS 13.1
2. My phone was rooted, had TWRP recovery and ADB debugging was enabled in dev options. I can enter fastboot mode using hardware keys. I cannot enter recovery using hardware keys (shows a blank screen), but I can enter recovery using "fastboot boot recovery.img.
3. After I flashed COS 13.1, I was asked (in TWRP) if I wanted to install SU and I said yes and flashed it. This is when I was in a loop of being stuck on COS 13.1 splash screen for about 5-10 minutes and then my phone was "optimizing app xx of xxx" for 15 minutes and then rebooted and did everything all over again.
4. I tried to restored a nandroid backup using "restore" in TWRP, but phone is stuck in "cyanogen" splash screen for more than 40 minutes.
No replies...
Not sure what to do at this point.
I ended up wiping data and performing a factory reset through TWRP. Might try to upgrade again in the future.
After flashing TWRP and being successful, i installed LineageOS 14.1 and gapps as you have guided on your posts, i saw that there were some old folders that were left over from the many apps my wife have installed previously, so i decided to do a factory reset. After pressing factory reset, the phone restarted and booted into TWRP recovery, which then i clicked on "Format Data" from the wipe tab.
Things went really south from here on, i am unable to boot into anything i have flashed (i tried flashing LineageOS 14.1 and gapps). Once the rom and gapps are installed, the phone reboots back into TWRP again. it seems like the internal storage of the phone is still empty except with the 2 zip files i've put in. I am able to access TWRP Recovery and detect it as a R7S on my computer, but i cannot boot into anything else, its been stuck like that booting ONLY into TWRP ever since i've pressed "Format Data" which in this case is my mistake and i apologize, is there any solutions to unbrick the phone? Could anyone please help me? I would be very very thankful.
Edit: I have flashed a newer TWRP via TWRP itself under Install > install image. previously running on 3.0.2-2-r7sf-final.img but i tried downloading from TWRP website twrp-3.1.0-0-r7sf.img and flashed it vi TWRP since i cannot get into fastboot. phone booted up after wards into OS and made backups and kept it somewhere safe. was reading and panicking around the web for a good 10 hours