Database Info

Cuts my hand?

Hi all,
I got my Nexus one and ever since I am bugged with this "defect"?. I checked with one of my friends and his N1 got this defect too. Do you all have it?
The defect is that; Right above the volume control buttons, the back cover doesn't fit. Part of the front casing (being hard and all) cuts my fingers when i try to hold this thing in my right hand. And that's my hand I use for reading stuff..
My questions are:
- do you have the same problem?
- if not, how can I order a back cover that fits perfectly? since I am really really annoyed with this?
- if there's another way of fixing this issue, what would that be?
best,
kirpi
I am from Turkey and one of my friends brought this n1 to me by the way, so rma is not an option [and I actually unlocked the bootloader already anyways]

mine does not have this defect
http://www.htc.com/www/support/nexusone/
they might still get you a replacement part for a hardware defect that cut you.. id call or email them and ask

Mine is fine.

My first Nexus One did not have this defect. My replacement does.
Call HTC and have them send you a replacement battery cover. If the replacement doesn't fit, have them send you a new phone.

Yes, I noticed it too and looked all over the web to see if it was normal. Seeing as others have noticed it to and some have even had one that fits properly and one that doesn't I think I'll try to call HTC and have them send a free cover. Has anyone tried this and been successful?

well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey

The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.

kirpi said:
well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey
Click to expand...
Click to collapse
Did you speak to someone at HTC? Did they offer to send a replacement cover? The thing is I can't tell if it's the cover that is off or if the phone part is off.

The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.

Called HTC and they agreed to send out a replacement battery cover so we'll see if that changes anything.

My first phone did not have this. My second did. I am now on my third and it has the slightest of a lip. You couldn't even notice it unless it was up to your eye. However my issue is with the screen. The right side of the screen is not flush with the phone, and there is a jagged lip that is horrid. I've been waiting for them to close my current ticket ( It's been 2 weeks, and have my money back in my back, but it still says testing phone ( yes , it was unlocked =) )). My old phone had massive dust under the screen.
Anyone else have this screen to phone edge problem? I almost regret selling my iPhone as the quality control seemed better. But I love my openess

I have no edge issues on the back cover...

muncheese said:
The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.
Click to expand...
Click to collapse
yeah if that cut him WOW!!! hahahaha

What kind of moisturizer do you use? Your hands must be silky smooth! Like buttah!

I just noticed this defect today! I only noticed it after dropping it though (while sitting on the toilet it fell out of my pocket) so no damage of course but didn't notice before hand

well i am not that silky smooth but my skin may be a little too sensitive, i admit (allergetic person here)
However, the off part is not that much small in my casing.
Also it might be related to how I handle the phone. I use my right hand to hold it and my index finger and middle finger hovers around that problematic edge all the time while using it. I changed my handling (since i cannot change jobs for a manual labor that easily )
anyways, HTC has agreed to send me a back cover without even asking too many questions (obviously to a friend of mine in america) It made me think that, this is a well known issue. If that defect is with the chassis than I'll just wait for HTC desire sell mine after that

I received my replacement battery cover today and unfortunately it also does not fit. I called HTC and they are escalating the issue to the accessories department to have them investigate the battery covers not fitting the recently built Nexus Ones.

cekle
it is saddening to hear that.. the rma life cycle is like hell for me (since i reside in turkey) well, please let us know if ever a fitting cover is sent to you and i will re apply.

I think all the N1s have this defect. Mine is about a quarter of a millimeter off just above the battery. It is actually common in electronics for covers to not fit perfectly.
Do I really care about something being .25 mm off? No.
The better question is, should that be enough to cut your hand or even scratch it?
In any manufactoring there is a "tolarence" that defects have to be under in order to be shipped out. In reality, everything has a defect.
The amount this cover is off is certiantly within most manufactoring tolarences. The N1 isn't going on a space shuttle so there is no need to have a tolarence of .001 mm.
There, you learned somethhing amount engineering and manufactoring.
In all honesty, do I think the tolarence for the cover was a big too high? Yes, but you are building something that costs $175 to make and then turning around and selling it $179 already, some corners must be cut.

arkavat said:
The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.
Click to expand...
Click to collapse
Mine does not have a gap.
It looks the same on both sides for me.

[Q] Loose Battery Cover?

My battery cover is a little loose all of a sudden. at the bottom it now moves a little. When I squeeze (lightly, normal use amount) the phone at the bottom kinda clicks. Anyone else have this issue?

Yes. I called HTC and they're replacing it. But for now what you can do is put paper inside the case
Sent from my HTC Sensation 4G using XDA App

Yeah, several other people reported this problem on a Dutch forum. People should not open the backcover unless they really have to. After opening the cover a few times the cover is getting loose and starts to crack when you press it.

okay so I have the same problem, should I be worried or is it just the case with all sensation handsets ?

Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App

secano said:
Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
I don't think that's it, the battery is fitted normally, and I've just tested it with battery removed, it does the same thing, I should mention that it isn't really that obvious, but it's an annoyance nonetheless, such an expensive phone to have a glitch like that.

can anybody confirm that it does loosen after some time of usage, I mean did it came like that out of the box or was it getting loose with time?

I just noticed this on mine this morning , will steal a new cover soon

****ttttt let me check mine lol

...same here, at the right bottom corner!!!!
...and I agree, tooooo expensive phone for such a glitch!

Spekko said:
I just noticed this on mine this morning , will steal a new cover soon
Click to expand...
Click to collapse
I went to a tmobile store to see if they'll let me switch. The rep told me thy they can't switch cuz its an htc problem. Then he got curious and pulled out his sensation to see if his had it...
He looked so sad lol I just got off the phone with htc and my replacement cover is shipping soon and if the second one is defective then I have to send in my whole phone so they can check it out. You guys should call htc I'd you already haven't

I fixed mine by adding some paper to the back.
http://forum.xda-developers.com/showthread.php?t=1215096

Hey first post here! Signed up just to have my say on this issue, just as i did with the android central forum.
Also posted this on the android central forums...
Got the creaking here also, definitely a design flaw. Being obsessive with my devices i couldnt live with it!
I do not recommend putting paper in the cover to fill the gap, as this is just expanding the cover further making it even MORE loose when the paper is not in there. Also i wouldn't recommend it because the paper pushes the back cover out a little more, you may loose a connection for the ground. Which is the little metal springy thing, half way up the right hand side. Obviously its not a good idea to 'push' the cover further away from this ground spot. I have heard that people have had issues with screen responsiveness due to a static build up from not grounding properly.
What i did to fix this problem was a bit of a kitbash of sorts.
Mine was creaking on the bottom right area, like most. The problem is there is too much play between the little black catches on the battery cover and the latch on the handset. Instead of filling up the gap between the phone and the cover (Ala paper, card in the cover) I closed it!
What you need to do is get some very thin plastic film. Like that on kids toy packaging etc. Not the thicker stuff though. This stuff would be under 1mm thick. It came as a viewing window in the box my new wallet came in. So you can sorta imagine what im talking about.
I cut a piece about 10mm long and as wide as one of the two little black catches. I applied a VERY thin coat of super glue to one end of the film. Just enough to cover the area under the catch. Then i carefully placed the film with the superglue on it under the catch, and then quickly applied some pressure to it with some tweezers. Then i carefully cut the excess off with a pair of finely tipped nail scissors.
The result is that it now PULLS the screen/phone INTO the cover more by making the little black catch thicker. Not the opposite (paper method), which pushes the cover out, creating a further problem of adding more paper under the cover over time as the cover expands/loosens to compensate. Not to mention a possible grounding loss and resulting damage.
Hope this helps some people that have had multiple replacements or could not be bothered replacing for such a cosmetic issue. (Like me). It definitely works, just got to get your surgeon on and be accurate with your placement of the film.
Apply this to what ever side creaks the most, and bam its gone. Nice. Solid phone... again.
If anyone wants more specific details etc, im all ears.
Regards,
Matt.

MrSoulSOng A video explaining this fix would be appreciated ^_^ cuz I didnt buy my phone from here and I still gotta wait for about a month to send it to the shop to fix or get a replacement

...just an update...after buying new back cover from no1tech (that was month and a half ago...) there's no loose spots, no creacking...!
Very satisfied now I am. Finally phone feels and looks like it should be - beast in compact housing!

I have the very same problem too. VERY annoying

well I had the same problem however what i did was that on the back cover inside of it I put some black electric tape on to the sides that creak (next to the sides and the clips) and when I put the cover back on there was no creaking at all. figured it wont interfere with the single because people put cases on the back all the time plus its electric tape meaning it'll prevent from short circuits and I don't think there should be any overheating issue as its a very small quantity.

[Q] N5 Random Shut Downs After Screen Replacement

So I ended up cracking my screen and installed a replacement last night. Everything seemed fine but I noticed, after putting it back together, that any slight bit of pressure or shock to the top causes my N5 to shut off.
I took it apart again to make sure all of the ribbons were properly connected and to take a second look and everything appears fine. I didn't have this problem prior to the replacement and I was very gentle during the tear down and reassembly so I don't the the CPU or anything on it is damaged. Other than the top being hyper sensitive the phone works perfectly.
Any ideas on what the problem is or could be?

SOLVED(sorry, I don't know how to change the title)
I just wanted to fill in anyone curious or running into this problem in the future on how I resolved the issue.
So after some time I narrowed the problem down to the second back cover (the one with the camera lens and beneath the Nexus branded cover) making contact with the motherboard. More specifically, compressing the power management IC with its aluminum cover. You want to make sure that chip is laid flush which was a PITA, for me at least, because the headphone jack and earpiece speaker wants to push it up and out. What I did was put the jack in, lay the board on top, then gradually adjusted the jack with tweezers while gently pushing the motherboard down until the board was flush, then placing the earpiece speaker in.
I then placed the second back cover on and tightened the screws until I could feel them just slightly putting pressure on the cover. I can't stress how light this pressure is as it is the key in resolving this issue. To compare it to changing your oil filter on your car; when you can feel the filter make solid contact with the block and you then turn it about another half turn to seal it; it's like that but without that half turn.
Anyway, I hope this helps anyone else unfortunate enough to both break their screen and then have their phone randomly shut down when any pressure is applied after fixing it.

hello
TCGUK said:
So I ended up cracking my screen and installed a replacement last night. Everything seemed fine but I noticed, after putting it back together, that any slight bit of pressure or shock to the top causes my N5 to shut off.
I took it apart again to make sure all of the ribbons were properly connected and to take a second look and everything appears fine. I didn't have this problem prior to the replacement and I was very gentle during the tear down and reassembly so I don't the the CPU or anything on it is damaged. Other than the top being hyper sensitive the phone works perfectly.
Any ideas on what the problem is or could be?
Click to expand...
Click to collapse
hello where didu buy the screen for your new n5 ? there is any king of intrusion to do it .
thank:good:

josedecuba said:
hello where didu buy the screen for your new n5 ? there is any king of intrusion to do it .
thank:good:
Click to expand...
Click to collapse
I bought mine off of eBay and it cost me $150. I could be wrong but it looked like the screen can't be separated from the frame. You might want to keep that in mind when purchasing because there are sellers that sell the screen without a frame. Tearing down the N5 was pretty simple. The hardest part for me was getting the back cover off as there are 4 (two on each side) large clips. If you end up bending the clips any, you can push them back to shape to keep the back from creaking like every Samsung I've ever owned. There's a nice guide on iFixit if you want to look at the process prior to ordering a new part.
I've read from others that you can send your phone into LG and they'll repair the screen for you. When you send it in they'll email a quote to you within a day. The price I keep seeing is $146 and I have no idea what the turn around on that is.

[Q] Tapping on upper middle of screen makes rattle vibrate sound like something loose

Do any of you have this issue?
When you tap on the middle upper of the tablet a little bit hard it causes a vibrate clicky loose sound like the components behind are loose?
I only noticed it today and im sure it wasn't like this before or if it was not so prominent.
Im out of my retailers return window so if anything needs to be fixed I'll have to go to samsung.
The device functions ok but im just a little concerned the screenis coming loose or thr digitizer..thevibration clicky sound is quite annoying and i can't remember if it used to be there i think it might as directly behind where it rattles is the camera and above the battery and speakers. I just hear and feel a vibrating rattling sound which annoys me and feels like the build is poor. Can you guys try tapping the middle upper of your tablet quite hard or moderqtely and see if you have same issue?
What do you think has happend screen coming loose?

I think the resistive and conductive layers of the screen have come loose from the hard tapping.
If i hold down the middle of the screen and release it makes a 'sticky' sound. What is likely to happen if this continues?
From reading it says the resistive and conductive layers come in constant contact meaning it. Ould misinterpret commands.
Is it possible the screen is just loosened from the digitizer or is it more likely the 2 layers of resisitive and conductive layer are loose?

Does anyone know what this is?
It is so annoying in certain parts of the screen it seems to be looose hence the tapping. Is the glue loose or the screen coming apart?
If i lie it flat on a table there is less rattling when i type but when i put it in my case to hold it up the clicky rattling sound is more im just worried it's going to collapse at some point. Can anyone fathom what might be causing this?
It feels like the creen has come loose slightly in certain parts of the screen as if i tap on the opposite side across the screen it seems to c9rrect this issue for a few secs which leads me to think the screen is coming loose

Ive just realised now it's the back cover which is loose or the insides.
It seems by me pressing down on the front screen too much and the back of the tablet not completely heald down on a flat hard surface t has somehow caused the back cover to come loose of the parts inside have come loose by being forced back slightly.
Does anyone guess what is hppening?
When i flip over the tablet and press the back and tap the back cover on the right side it sounds loose and if i press on it there is some give like there is some space.

So ive identified what is thr cause of this and it's that my case which has rubber corners which hold it against the back of the backbpard leaves a gap between tge tablet and the backboard of the case cover. When i tap the screen too hard it causes a flex ehich unfortunately has caused the tablettobend and push the motherboard and insides onto the back cover which hss now flexed and stretched i presume? Or it has xaused the components to dislodge and misplace, can the back cover actually stretch this much?ithought it wad hard pladtic that retains its shape
I heard the tab s creaks also but mine is the back cover has stretched out fr8m within not holding the components snuggly if that makes sense. What is the fix for this?

Creaky back?

Anyone's back a little bit creaky?
Any idea how to take it off?

Seriously? Mines pretty solid. What are you doing to the phone to make it squeaky? The back doesn't come off for consumers.

I can make mine squeak a little if I specifically try to do it by pressing down with my thumb near where the "idol" logo is. I have to go out of my way to do it.

same here, solid as a ROCK=)

I have the Idol 3 5.5, and just picking it up from a table makes it creak from squeezing the sides. No parts appear loose, however. The creakiest part is the SIM tray.

No creaking on my 5.5 idol 3.

Mine has creaked since the first moment. I think that is why my screen broke spontaneously when I was only holding the phone in my hand without any pressure whatsoever. Be careful not to put it inside tight pockets since some users have been breaking their screens this way. And I recommend a good case + a tempered glass if you wanna be sure.
I love this phone for other reasons, but I must admit the build quality of at least my device is mediocre.