[Completed] [Q] I can't boot after installing CWM Recovery (stuck) - XDA Assist

Hi, I was planning on installing a custom rom on my Samsung Galaxy Core GT-i8262.
So I installed CWM Recovery and it was sort of a success, Odin is already in green with the "PASS" keyword. I quickly wiped and factory reset as I'm following a guide that told me to do so.
After that wipe, I disconnected my phone and turned it off manually. Now a normal boot (holding only the power button) shows a yellow triangle and boots back to CWM recovery and not my first rom.
I tried going back to download mode but the yellow triangle error interrupts.
I hope someone takes time to help with this boot situation.
Sincerely, a newbie asking solutions from the professionals, XDA
Thanks!

Will I be taking a risk?
As the yellow triangle keeps me from going back to normal boot, download mode, recovery mode and redirects me to CWM Recovery, I was fiddling around (I'm not supposed to do so as I have minimal experience but I'm desperate.) and saw " mount sd" and "install zip" I was wondering if this is a fix by connecting my phone to the pc and mounting sd and transferring the .zip custom rom file and installing it?
I'm worried about the yellow triangle interfering and might permanently brick my phone.
Again, seeking for professional help. Thanks!

Hi
Thanks for writing to us at XDA Assist. Please go ahead and ask your question in the Galaxy Core q&a section here:
Galaxy Core Q&A, Help & Troubleshooting
Good luck!

Thread closed, thanks.

Related

[Completed] [Q] PLEASE HELP! Stuck in recovery screen bootloop, not responding.

Greetings everyone, I am a new member and hope to become more involved in the community.
I have installed many custom ROMs on my Galaxy Note 3 SM-N9005 in the past. On my latest attempt to install a custom ROM the recovery software went all funny. The phone would turn on and boot directly into recovery mode (displaying the text "RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING. Set Warranty Bit: Recovery"). It wouldn't go any further, meaning that I never get to see the actual menu where I would be able to clear cache, factory reset or install firmware. It then immediately dies and starts up again into the same screen. I tried using all the hardware buttons (i.e. booting into safe mode and recovery mode), the phone doesn't react at all. When plugging it into a PC there is also no reaction on the PC. The phone simply continues to boot into the recovery screen and then die before reaching the options menu.
PLEASE HELP, I have been trying to fix the issue for two days now. Any advice would be highly appreciated!
Hi, thank you for using XDA Assist. Can you boot into download mode? It sounds like you'll have to flash the stock firmware in Odin. If you run into problems you can ask for help herehttp://forum.xda-developers.com/galaxy-note-3/help
jd1639 said:
Hi, thank you for using XDA Assist. Can you boot into download mode? It sounds like you'll have to flash the stock firmware in Odin. If you run into problems you can ask for help herehttp://forum.xda-developers.com/galaxy-note-3/help
Click to expand...
Click to collapse
Originally the phone would not boot into download mode at all. It was essentially hard bricked. After a couple hours of messing with it, trying to get some kind of reaction out of the device, I managed to get it to boot into download mode. I actually managed this by pulling out the battery and pushing Power + Volume Down + Home whilst almost jump starting using the battery (connecting the battery connectors without fully putting the battery in to the phone). This managed to wake the phone into download mode similar to what a USB Jig would have.
Solution was found purely by luck.
Thread closed.

[Completed] Verizon S6 Edge - bricked

Hi All,
I rooted my phone yesterday using the Ping Pong method. I installed TWRP and Busy Box. I wanted to boot TWRP into recovery to take a Nandroid backup, but it would not respond when I told it to boot into Recovery. I went into TWRP settings and selected the alternate Reboot method checkbox. After rebooting, I have a light blue Verizon prompt saying that my device is corrupted and I need to use the Verizon Software Repair Assistant.
I tried rebooting and it prompted me stating that custom Rom's are not supported, I hit the Volume Up to Continue and now it says "Downloading" with no indication or progress bar.
I found a Verizon S6 Stock Rom, and believe I need to reflash it somehow. Does anyone have any suggestions?
Thanks,
--
Adam
Hi, thank you for using XDA Assist. I'd flash the stock firmware with Odin and start over. See this,http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thre ad-t3078841. If you have further questions ask in that thread.
Funny forget to register on XDA to post questions.
Thread closed.

[Completed] Phone Restarts, Unable to set USB-Debugging, No CWM, Flashing ROM nothing happens

My Device is GT-S7582 Samsung. Stock Firmware. Not rooted.
Problem #1:
It suddenly reboots itself about 15 seconds after the launcher appears.​
Problem #2:
After enabling USB-Debugging, the phone reboots, and USB-Debugging is back to being disabled.​
Problem #3:
No recovery menu appears when going to recover mode, it's just a read exclamation on upper left corner and the Samsung Logo.
I tried flashing CWM using ODIN, but nothing happens after.​
Problem #4:
I can flash the ROM with ODIN, but nothing happens after, the phone is in the same state. I tried about 4 stock ROMs already​
Is there any other way I can fix my phone? Thanks.
banjomike said:
If your phone isn't rooted flashing through Odin won't do anything unless you're flashing a rooting file to root you're phone. you need to root (through odin)then flash cwm(Odin) then ROM (Odin)or try factory reset and see if it makes your phone usable
Click to expand...
Click to collapse
Thanks for fast reply. I will try this.
Will be back.
banjomike said:
If your phone isn't rooted flashing through Odin won't do anything unless you're flashing a rooting file to root you're phone. you need to root (through odin)then flash cwm(Odin) then ROM (Odin)or try factory reset and see if it makes your phone usable
Click to expand...
Click to collapse
It didn't work. It seems that my phone becomes READ-ONLY.
I have a 15 - 20 second window to navigate through my phone before it restarts. Every time I change something, like settings, it reverts back after it restarts.
I tried deleting some folders using a file manager, but when it restarts, the folder is still there.
Even in safe mode, the phone restarts.
Can any one help me? Please? Thanks.
Has any one knows how to fix my problem? I think my phone has become read only. Please help me, please.
Hi there,
I'm sorry but I can't find anything related to your question/device but if you already flashed 4 times stock firmware and still same errors then my advice is to go to service center with that device.
Please post that in the forum bellow for more answers from the experts.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Samsung Galaxy S Blaze 4g (SGH-T769) Bricked?

About a year ago I successfully rooted my SGH-T769 with a version of CWM using ODIN, and today I am trying to unroot it by installing original ROMS... I factory reset the phone and cleared dalvik and what-not, but now when I try to boot up the phone, I am stuck at the Galaxy S Blaze splash screen. I figured "oh well I only need to get into DOWNLOAD MODE"
So I turn the phone off and attempt to get into download mode using MANY different methods.
(all 3 buttons, release power; all 3 buttons, plug in, release power; two buttons, insert battery, release volume; ECT.)
I'VE TRIED IT ALL.
Is there maybe an app I can get on my computer that will boot the phone into DOWNLOAD MODE when I plug it in?
Or is there a fix for this?
(NOTE: I CAN STILL ACCESS CWM RECOVERY MODE BUT THAT DOESN'T SEEM TOO USEFUL)
(ALSO NOTE: If you know how I can use CWM RECOVERY MODE to correct this issue... Tell me and I'll love you long time. :3 )
:good:
Hello,
To better assist you, your thread will be moved to your device forum linked below.
http://forum.xda-developers.com/blaze-4g/general
The experts there may be able to help. Good luck.

[Completed] Softbricked phone - recovery wont work

Hello,
actually i have made it, a softbrick which i couldn't fix alone
At the moment i use the ZTE Star 2.
So here is the problem:
I would like to flash a custom rom like MIUI, for that reason i was searching for a custom recovery, i chose this one:
recovery.romzh.com/zte/2015/01/136.html
because i couldn't speak Chinese i tried every combination of the given numbers.
But nothing have made it.
So i extract the recovery img file from the application (in the TEMP folder) and try to flash it manually with adb fastboot, after the file is transmitted to the phone there is a response says FAILED unknown command or something like that.
Okay, for that reason i pushed the file to the root of my sdcard and flashed it with the app rashr, which have work "correctly".
And i thought this was the problem...
Now if i want to boot my phone the ZTE logo appears for about halve a second and then the display turns off... But i think the phone is still on, because if i press the power button only a short time, nothing happens. But if i press it about 10 seconds the device will reboot, like if i do that while it is running...
The first time i have made this (press about 10 seconds) the device has booted normally but since i tried it again to get in the recovery it would boot, enter the recovery or something else, i see the logo for about half a second and nothing happens.
I couldn't enter the recovery mode and font know how i should enter the bootloader, because i don't know if the device is powered off or powered on
Thanks in advance for any help!
Greetings TurboToni
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!

Categories

Resources