After flashing custom rom that is not suit for my device which is MyPhone Agua Iceberg, After installing the rom and booted the system. I only see a black screen and I can't able to get to recovery mode to revert the backup file of my previous room. Please guide me, it will help me much.
Thanks!
Hi
Thanks for writing to us at XDA Assist. You can't flash ROMs or firmware that aren't intended for your device, the result is usually damaged partitions, which is probably what's happened to your phone. Because there's very little information available for your device I can't see a way for you to recover your phone. Are you able to boot into anything at all?
I brought it to ny friend and he used sp flash tool. My device is ok now. My problem right now is how to upgrade to kitkat, and how to increase ram memory.
Thans alot for your time to reply.
Ok, that's good. The only ROM I can find for your device is here:
[ROM][JB 4.2.2★][★DEGRUS™ & Megatron007™★][★DARKSIDE COLOUR OS★]
It's a Jelly Bean ROM though. Devices such as this, that are relatively low-popularity don't usually gain attention from developers so it isn't likely that there will be many ROMs available for it.
Thanks my friend for helping me. I appreciate it alot!
Now, I have the feeling of being afraid to flash rom because of what might happen. Grr!)
The ROM I linked you to states that's it's compatible with your device so you should be fine. I forgot to mention that you can't increase RAM, that's a hardware limitation.
Issue resolved, thread closed, thanks.
Transmitted via Bacon
Related
I have been out of touch with rooting and flashing ROM's for a few years now.
I have rooted my tablet.
I want to flash a ROM but have no idea which one I should use.
I would like a suggestion from someone on a ROM. I do want a stable ROM.
Also just to refresh my memory.
I download the ROM to SD Card, then go into recovery and flash ROM from there. I am using TWRP recovery.
Thanks in advance and forgive if I am not using the proper terminology, it's been awhile!
Mark
Hi wildrat
As you are probably aware we don't allow comparison threads. They can cause bad feeling, plus users can get different results from the same rom depending on individual setups.
If you search you'll find plenty of help on how to flash. Half the fun is to try different builds and see what works for you.
Thread closed but good luck and enjoy
My dear knowledgeable friends I had BlissPopV3.1 and it was working fine, but then I tried to flash some other ROM ..... long story short ever since BlissPopV3.2 got released I have been trying to flash it but its not going past the Samsung logo with model... So due to my bad luck and lack of knowledge now I cant go past recovery/odin download mode....
Could anyone please provide detailed info on how I can flash BlissPopV3.2 (if possible with download links) and which versions of recovery/kernel etc. I should use...
Thanks in advance to every one of you guys...
Especially to all XDA devs who are dedicating and sacrificing their valuable time to provide the best of the best for my G7102 device...
REQUEST FOR RECOMMENDATION:
Most stable and recent custom ROM for G7102 (ms013g)
Respectfully
Hi, thank you for using XDA Assist. You are probably going to have to flash the stock firmware with Odin at this point. See sammobile.com for the firmware.
Thread closed.
Hello everyone,
I'm using "Alcatel One Touch POP C5 5036D". The problem is, this phone is so slow that it takes about 30+-seconds to open up any app or function. i tried some custom Roms but all have some bugs or i don't like them. i searched many times but couldn't find an easy way to install stock rom but an Official Tool that installs stock firmware from their server & it takes so long. Even couldn't find a single rom that's fast enough & works everything perfectly. As i have mentioned earlier returning to Stock ROM is such a pain.
Now i'm asking for help to all you Developers, please can you make it easier for this phone users to install stock firmware like we download the Firmware package & install it with SP Flash Tool or something like this? Please it's my heartiest request to you all if you can, make this thing simple or make some ROM that really works fine for this phone users & oblige us.
MW Rajiv said:
Hello everyone,
I'm using "Alcatel One Touch POP C5 5036D". The problem is, this phone is so slow that it takes about 30+-seconds to open up any app or function. i tried some custom Roms but all have some bugs or i don't like them. i searched many times but couldn't find an easy way to install stock rom but an Official Tool that installs stock firmware from their server & it takes so long. Even couldn't find a single rom that's fast enough & works everything perfectly. As i have mentioned earlier returning to Stock ROM is such a pain.
Now i'm asking for help to all you Developers, please can you make it easier for this phone users to install stock firmware like we download the Firmware package & install it with SP Flash Tool or something like this? Please it's my heartiest request to you all if you can, make this thing simple or make some ROM that really works fine for this phone users & oblige us.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
It looks like there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
Vivek_Neel said:
Hi,
Thank you for using XDA assist
It looks like there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
Click to expand...
Click to collapse
Thank you Mr. Neel for your kind guidance but it seems some already posted for help about this device & got no help. However i have posted my say there as you guided, hope someone may step ahead for us.. .
Hello everyone,
I'm here today to SEEK HELP. I have bought a variant of Wiko Slide 2 aka Cloudfone Excite Prime here in the Philippines. I wanted to make my personal back for this device that is flashable via SPFlashTool. Or make ".img" files for short. I already know how to that on my previous devices but that was KK having 3.4.6 kernel. This is my first LOLLIPOP device that is why I needed some advice and help.
My questions are:
1. How will I know if my bootloader is locked?
2. Is it necissary to unlocK the bootloader so that I could make full back up?
3. Can I directly back up this via MTKDroidTools(the most convenient back up method I ever tried for MTK)? Since it is using different kernel.
4. How do I make custom recovery or CWM for Lollipop(kernel 3.10.x) based?
That would be all for now. Please help me I really don't know stuffs for Android L since it is different from older versions. Thank you :good:
Hi,
I can't find anything on your device here on XDA, aside from this thread, http://forum.xda-developers.com/android/help/help-root-wiko-slide-2-t3279083
I doubt that will help you, so I suggest you try asking all of your questions in one thread created here,
http://forum.xda-developers.com/android/help
Good luck!
I own a videocon VT85C tablet. Its roughly 5 to 6 years old. This thing has 1Gb RAM.
I have rooted this device thanks to XDA team, however, presently I would like to flash a custom ROM on it.
I have tried official TWRP app but my device isn't listed on it. Even tried with clockworkmod and flashify but couldn't find a working thing.
I don't want this device to get bricked.
So basically I wanted help regarding some discussion on this device. A help would be very much appreciated.
Yes I am a new registered user here, so might be getting some difficulty to adapt to this environment. Thank You. Please help