Hello guys! I have seen many of you complaining about Lollipop update 5.0.1 for various reasons (battery, heat,etc) but I never faced such! I was happy with 5.0.1 update until I rooted and saw that Xposed Framework wasn't compatible with it! Also many of you guys have tried to downgrade it but lost their IMEI number or nulled it to be more specific and so did I. I tried to flash different modems but nothing worked.
NOTE: This is for I9500 only and I haven't tested this on other variants. So I am not responsible for any of the damage to your phones and your curses
Requirements : KK 4.4.2 firmware.(mine was: I9500XXUFNI2_I9500ODDFNI1_INU)
Lollipop 5.0.1 firmware.(mine was: I9500XXUHOAA_I9500ODDHOA2_INS)
Odin_v3.09.
7-zip.
Following these steps you'll successfully downgrade to 4.4.2
1) - Boot into RECOVERY (custom/stock) and wipe data reset.
2)- Now boot into DOWNLOAD mode (volume down + power + menu)
3)-Assuming that you have your usb drivers installed connect your phone to PC and open Odin_v3.09.
4)-Flash KitKat 4.4.2 firmware from AP.
5)-After Odin gives a PASS and your phone restarts and after completing the initialization you can see that your IMEI is nulled.
6)-Now use 7zip to open the 5.0.1 firmware .tar.md5 file and extract the MODEM.bin file from the same.
7-)Turn off your phone and boot into DOWNLOAD mode and connect your phone to PC, run Odin and flash this MODEM.bin from CP.
After successful flashing your phone will reboot and you will see that you have your IMEI number and your I9500 will be on your preferred network.
BUT the BASEBAND version will be of Lollipops firmware as we flashed its modem.
Tested and working on my I9500 with INS/INU firmware.
Thankyou and All the best!
Hit thanx if helped!
Mandark52 said:
Hello guys! I have seen many of you complaining about Lollipop update 5.0.1 for various reasons (battery, heat,etc) but I never faced such! I was happy with 5.0.1 update until I rooted and saw that Xposed Framework wasn't compatible with it! Also many of you guys have tried to downgrade it but lost their IMEI number or nulled it to be more specific and so did I. I tried to flash different modems but nothing worked.
NOTE: This is for I9500 only and I haven't tested this on other variants. So I am not responsible for any of the damage to your phones and your curses
Requirements : KK 4.4.2 firmware.(mine was: I9500XXUFNI2_I9500ODDFNI1_INU)
Lollipop 5.0.1 firmware.(mine was: I9500XXUHOAA_I9500ODDHOA2_INS)
Odin_v3.09.
7-zip.
Following these steps you'll successfully downgrade to 4.4.2
1) - Boot into RECOVERY (custom/stock) and wipe data reset.
2)- Now boot into DOWNLOAD mode (volume down + power + menu)
3)-Assuming that you have your usb drivers installed connect your phone to PC and open Odin_v3.09.
4)-Flash KitKat 4.4.2 firmware from AP.
5)-After Odin gives a PASS and your phone restarts and after completing the initialization you can see that your IMEI is nulled.
6)-Now use 7zip to open the 5.0.1 firmware .tar.md5 file and extract the MODEM.bin file from the same.
7-)Turn off your phone and boot into DOWNLOAD mode and connect your phone to PC, run Odin and flash this MODEM.bin from CP.
After successful flashing your phone will reboot and you will see that you have your IMEI number and your I9500 will be on your preferred network.
BUT the BASEBAND version will be of Lollipops firmware as we flashed its modem.
Tested and working on my I9500 with INS/INU firmware.
Thankyou and All the best!
Hit thanx if helped!
Click to expand...
Click to collapse
Tnx Bro .. Its working fine now , I was searching for a solution for IMEI number "Null/null" after downgrading :laugh:
hariprasad022 said:
Tnx Bro .. Its working fine now , I was searching for a solution for IMEI number "Null/null" after downgrading :laugh:
Click to expand...
Click to collapse
Glad I helped you!
i dont have modem.bin on my folder
coz i'm used leaked chinese version
where i can download that file and can i use this method if i want install KK 4.4.2 from another country ?
Mod Edit
there is already a thread on this:
http://forum.xda-developers.com/galaxy-s4/general/i9500-easy-to-downgrade-official-t3036258
Thread closed
malybru
Forum Moderator
Related
I have seen threads being spammed with people not being able to upgrade to 4.4.2 and asking for help so i thought it would be better to make a thread for that purpose.
There is no need to root the polish stock rom if you want to move on to a custom rom after you have updated the new 4.4.2 bootloader!
You Know the deal if anything goes wrong then the blame is on you not me...
In this guide the links are for the older 4.4.2 stock polish rom "N9005XXUENA6_N9005OXXENA5".
For the newest stock rom N9005XXUENB3 and newer when available click here and put N9005 in the search box and download what ever country closest to yours that is available.
ODIN 307
Download Polish stock 4.4.2 rom "Mega mirror" and flash via Odin 307 in PDA tab and remember to tick Phone Bootloader Update.
Download TWRP for 4.4.2 and flash via Odin 307 in PDA tab. I didnt like the other recovery so i use TWRP and it's much better in my opinion.
Now you should see if the phone boots up the 4.4.2 polish stock. If it does then go to step 4. If it doesnt then move to Odin 309.
Now flash you chosen custom rom via recovery. Enjoy :victory:
ODIN 309
Download Polish stock 4.4.2 rom "Mega mirror" and flash via Odin 309 in AP tab and remember to tick Phone Bootloader Update.
Download TWRP for 4.4.2 and flash via Odin 309 in AP tab.
Now you should see if the phone boots up the 4.4.2 polish stock. If it does then move to step 4. IF it doesn't then move to step 5.
Now flash you chosen custom rom via recovery. Enjoy :victory:
Download 4.4.2 bootloader and flash with Odin 309 in BL tab. This is only done if the stock 4.4.2 rom dosn't upgrade the bootloader. Let it boot so you can check if it worked. If it did boot into 4.4.2 stock then go back to step 4. Last resort if the above didnt work is to try the SamMobile way below.
SAMMOBLIE
Model: SM-N9005
Country: Open Europe
Version: Android 4.4.2
Changelist: 340325
Build date: Thu, 9 Jan 2014 23:09:09 +0000
Product Code: OXX
PDA: N9005XXUENA6
CSC: N9005OXXENA5
MODEM: N9005XXUENA2
Download: N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX.zip
NOTE
- This test firmware WILL wipe your data. So, back it up!
- You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware is a pre-release build and not official from Samsung.
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_N9005XXUENA2_REV03_CL1277177.tar.md5 to CP
- Add CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Mega file md5 - 7730BABC7713DFBE5934278FD653B3F7
Youtube video with instructions:
Does it have to be Polish ? Can we use other ones ?
Also, do we have to tick Phone Bootloader Update ?
I didn't tick this earlier, so it kinda screwed the phone. Softbricked it and then "kinda" fixed it.
And BTW, Phone Bootloader Update in 307 is disabled, greyed out.
But I'm running into some problems. Now I need to re-flash it.
Colide said:
Does it have to be Polish ? Can we use other ones ?
Also, do we have to tick Phone Bootloader Update ?
I didn't tick this earlier, so it kinda screwed the phone. Softbricked it and then "kinda" fixed it.
And BTW, Phone Bootloader Update in 307 is disabled, greyed out.
But I'm running into some problems. Now I need to re-flash it.
Click to expand...
Click to collapse
If you follow the guide it will work and if 307 didnt work for you then 309 will.
Yes just go with the polish version to be on the safe side. I have only tried the polish version so i cannot speak for the other versions. If the 309 dont work eather then download the separete bootloader i have provided and flsh it with 309 and tick the Phone Bootloader Update.
Well, this one requires to update the modem. Not really sure I want to do that.
But, should I update Bootloader via Odin ?
Sent from my ASUS Transformer Pad TF300T using Tapatalk
Colide said:
Well, this one requires to update the modem. Not really sure I want to do that.
But, should I update Bootloader via Odin ?
Sent from my ASUS Transformer Pad TF300T using Tapatalk
Click to expand...
Click to collapse
Yes bootloader needs to be flashed via odin.
md5 hash please
Hi
Can you please post the md5 hash of the file N9005XXUENA6_N9005OXXENA5_XEO.zip
MEGA does not provide hashes. The file is long and, I think it is worthwhile to check it before flashing it.
Thanks for your excellent guide.
i dont have a md5 but i checked with md5 checker and the file i have on my harddisk has - 7730BABC7713DFBE5934278FD653B3F7
Hope you can use that.
MD5 correct. Thanks.
Zionator said:
i dont have a md5 but i checked with md5 checker and the file i have on my harddisk has - 7730BABC7713DFBE5934278FD653B3F7
Hope you can use that.
Click to expand...
Click to collapse
Thanks a lot.
I confirm that my N9005XXUENA6_N9005OXXENA5_XEO.zip file downloaded from MEGA had an identical md5.
Thank you. But its a pre-release version, no?
Is it not better to install one of the final 4.4.2 by now ? any recommendation of those ?
tester5224 said:
Thank you. But its a pre-release version, no?
Is it not better to install one of the final 4.4.2 by now ? any recommendation of those ?
Click to expand...
Click to collapse
Doesn't matter if you are gonna flash a custom rom after you get the new bootloader on the phone.
So it all depends what you wanna archive.
Zionator said:
Doesn't matter if you are gonna flash a custom rom after you get the new bootloader on the phone.
So it all depends what you wanna archive.
Click to expand...
Click to collapse
Want to get the latest\best 4.4.2 official rom, not a mod.
tester5224 said:
Want to get the latest\best 4.4.2 official rom, not a mod.
Click to expand...
Click to collapse
Well the latest stock rom from sammy is : N9005XXUENA7
Just put N9005 in the search box and download what ever country closest to yours that is available.
Hmm was unable to update main thread so added the video here.
Watch "Galaxy Note 3 - Samsung Official Kitkat 4.4.2 - How to Flash/Install" on YouTube
https://www.youtube.com/watch?v=PurJfuEsA0s&feature=youtube_gdata_player
Edit : ok i managed to add youtube video to the main post from my pc
Sent from my SM-N9005 using XDA Premium 4 mobile app
THIS IS A COMPLETE NOOB FRIENDLY GUIDE FOR FLASHING BOOTLOADERS,MODEMS/BASEBAND.
Requirements :
A PC
USB 3.0 DATA CABLE (2.0 SHOULD WORK TOO)
ODIN 3.07 0R 3.09
NOTE3
ALSO PATIENCE
INSTRUCTIONS
NORMAL METHOD
1.Power off your phone ( Don't Restart)
2.Press Power + Volume Down + Home buttons until you see download mode .
3. Attach it your PC and open ODIN 3.07 OR 3.09
4. Select AP/PDA and ADD your .tar file or .bin file
5. START
6.It will restart itself .
Go to Settings>> About Device >> and Check Your baseband/bootloader has changed or not.
If not start the procedure again . I did it twice to make it work.
Click to expand...
Click to collapse
Always make sure KIES is disabled ... sometimes it has been known that KIES interferes with ODIN.
KHIZAR'S METHOD
If the above procedure does not work for you try this method .
1.Go to download mode from your OS restart menu,
2.Attach your phone to your PC.Let it detect your phone in download mode first.
3.Open ODIN 3.07 OR 3.09
4.SELECT AP/PDA and ADD your .tar file or .bin file.
5.Untick AutoReboot and Start
6.Then reboot manually into download mode without booting into the rom.
7.Then flash the modem/bootloader again.
8.Now power off the phone and then manually boot into your OS.
9.Check in About if baseband/bootloader has changed.
Click to expand...
Click to collapse
TRIANGLEAWAY METHOD
If the above solutions still did not work for you ...
1.If your phone is rooted , Use Triangleaway to reset your binary counter and make it fully stock.
2.Flash stock firmware using ODIN 3.07/3.09
3.Check to see if your baseband/bootloader has changed
Link to Triangleaway Below
LINK
Click to expand...
Click to collapse
NOTE : For Flashing Modems you can use CP/PHONE in odin too.
For users who do not know how to flash stock please follow this great and easy guide
LINK
Nice. Let's hope this does help users like we thought it would..
Edit- My method isn't right. You flash the first time and then manually reboot into download mode then flash the second time.
Sent From My SM-N9005 To All You Wonder Nobodies!!
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
ibraahim said:
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
Click to expand...
Click to collapse
You don't need to be rooted. And I don't think knox will be tripped since you aren't flashing anything that's been modified, only flashing unsigned/modified images via Odin trips knox. But since you are flazing a signed modem you should be fine.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
wijnkuip said:
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
Click to expand...
Click to collapse
1. No need. Just follow the guide, nothing more..
2. Check the modem thread that's in the general section, if you can't find it there then you may have to pull it from the stock FW. Also some roms devs have the modem in their OTA/OP so may wanna check there as well.
3. New isn't always better. Update if you have issues, if something isn't broken then there is no need to fix it.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Downgrade from 4.4.2 to 4.3 on N9005
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Addymore said:
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Click to expand...
Click to collapse
Like it's been mentioned everywhere it's NOT possible to downgrade from KK BL to JB BL on the N9005...
Sent From My SM-N9005 To All You Wonder Nobodies!!
with the current modem/firmware/bootloader (I don't know what gives me the issue) I cannot use LTE while I have an SM-N9005 and friend of mine with unrooted Note 3 (bought in a shop in our country) has LTE 4g, while I have an Italian CSC.
If I use a modem from an other rom, will I have LTE as well and still have my Knox intact?
Thanks a lot guys
Your threat was a live saver man. For a sec I thought I lost my phone. Flashed modems b 4 but thanks to u I got reminded to use the new Odin(stupid me used the old one).
z3x baseband
Just a quick question , im about to buy a z3x box I was wondering if it repairs baseband s/n and imei on n9005 my phone reads null/null imei unknown baseband and a wild serial number, many thanks
4.3 Modem on kitkat
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
MuhammadZeeshan7 said:
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
Click to expand...
Click to collapse
You cannot go back to old bootloader once you are on KitKat, try flashing a new firmware.....
My phone currently is running the KOT49H.N9005DXUGNH1 rom, but i have a need to flash the N900XXUDNC1 modem. Can I do that?
nice one thanks
@fahadali2315 a suggestion from my side, why don't you include this link for latest bootloaders - https://www.androidfilehost.com/?w=files&flid=12697
and this link for latest modems - http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Lyon888 said:
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Click to expand...
Click to collapse
Are you Flashing the Full Firmware to update the bootloader?
Are you Flashing the Correct Firmware for your Carrier and Device?
Your Device is in Download Mode?
USB Debugging is enabled?
You Have the Samsung Drivers installed on your pc?
If the answers to the above is Yes - Try a different USB cable and Port on your pc
Sent From my SM-N910W8 using Tapatalk
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Lyon888 said:
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Click to expand...
Click to collapse
I'd personally flash the full Firmware - Benefits... Updated bootloader - Updated Modem & Any associated "fixes".
Sent From my SM-N910W8 using Tapatalk
Tested on my Canadian i337M S4 (4.4.2 MVLUFNI2 firmware). Knox was not tripped.
This may work on other S4.
Summary of the Steps:
- Downgrade to special Kernel from W0lfdroid
- Root with TowelRoot
- Flash back 4.4.2 Kernel
- Downgrade to 4.2.2 Modem
- Unlock with RegionLock Away v1.3
- Flash back 4.4.2 Modem
Detailed Steps:
-=FILES REQUIRERD=-
Download these ROMs from SamMobile:
4.2.2 rom for your phone
- Use 7zip to extract MODEM.BIN from it
4.4.2 rom for your phone
- Use 7zip to extract MODEM.BIN from it
- Also use 7zip to extract BOOT.IMG (this is the Kernel), and archive it as a tar file.
-=ROOT=-
Follow this method:
http://www.w0lfdroid.com/2014/09/To...4-S5-and-Note3-Android-4.4.2-NF-or-Later.html
Important: for flashing back the Kernel, the 4.4.2 file from that site may not work properly (causes wifi to behave weird). You need to use the boot.img tar you made earlier.
-=UNLOCK=-
1. Put S4 into download mode by holding Volume Down and Home Button on startup, then press Volume Up
2. Attach Phone using USB cable
3. Start Odin
4. under the Files [Download] section 3rd button (Phone) point to the 4.2.2 modem.bin
5. click on start
6. --- After phone reboots, check it installed correctly by verifying the baseband version is the same as the one you just flashed
7. Once successful run RegionLockAway
8. Next you must install proper modem back using Odin
9. Start Odin
10. under the Files [Download] section 3rd button (Phone) point to the 4.4.2 modem.bin
11. click on start
12. --- After phone reboots, check it installed correctly by verifying the baseband is the same as the one you just flashed
Using Heimdall on Linux to flash stock ROM and getting everything back to original tripped KNOX for me.
Everything was done properly and ROM worked perfect. Oh well.
Tip: (lol)
When flashing stock firmware back to device stick to Windows stock ROM flashing methods. (Odin)
Wish I would of found this info a few weeks ago. niCCe!
ngold thanks
I have a phone from a guy at work it is a Rogers phone KNOX is already tripped the phone is rooted and on 4.4.2 MVLUFNI2 firmware can I still use your unlock method?
And if so which 4.2.2 firmware did you use on Sammobile I don't see any Canadian firmware listed for 4.2.2.
Do you have a link to the RegionLockAway is it just the 1.3 version I'm finding for the Note 3?
stdly said:
ngold thanks
I have a phone from a guy at work it is a Rogers phone KNOX is already tripped the phone is rooted and on 4.4.2 MVLUFNI2 firmware can I still use your unlock method?
And if so which 4.2.2 firmware did you use on Sammobile I don't see any Canadian firmware listed for 4.2.2.
Do you have a link to the RegionLockAway is it just the 1.3 version I'm finding for the Note 3?
Click to expand...
Click to collapse
Yeah you can use this method if KNOX is already tripped. (or you can just use CF-Autoroot as it saves some hassle)
To unlock, the firmware I used was VLUAMDJ . On Sammobile, you'll see it if you filter by Canada (Rogers).
For Regionlock Away 1.3, yes you can use the one posted in the Note 3 forum - http://forum.xda-developers.com/showthread.php?t=2470551
ngold said:
Yeah you can use this method if KNOX is already tripped. (or you can just use CF-Autoroot as it saves some hassle)
Click to expand...
Click to collapse
Thanks ngold,
Will CF-Autoroot unlock the phone it is already rooted?
stdly said:
Thanks ngold,
Will CF-Autoroot unlock the phone it is already rooted?
Click to expand...
Click to collapse
No CF-Autoroot only roots the phone. It trips the Knox, but it's easier. So if you already tripped Knox, that's the best method to root.
ngold said:
No CF-Autoroot only roots the phone. It trips the Knox, but it's easier. So if you already tripped Knox, that's the best method to root.
Click to expand...
Click to collapse
Thanks dude it worked I was worried because I didn't have a working sim card in it but no problems.
I can't flash the modem, bootloader locked?
download what roms? links?
If the phone has a 4.3 or newer bootloader, the phone can't be rooted without tripping knox as far as I know.
hello ,
i have sprint device (samsung s4 sph-l720t), someone upgraded it to 5.0.1,
now i want to downgrade to 4.4.2 via odin but i got an error after Nand flashing, exactly chen flashing aboot.mbn,
with 5.0.1 i tried to install 4.4.2 via recovery and it worked, why id does not work on odin ?
NOTE: when flashing 4.4.2 with recovery i cant activate Wifi, and when i flashed NON-HLOS and MODEM it works but this time camera fail to start.
any suggestion ?
http://forum.xda-developers.com/galaxy-s4/help/i9505-softbricked-flashed-odin-t3319770/post65471982#post65471982
Download the original firmware from
Sammobiles ...then flash it using Odin then it will work..
it did not work, event with stock firmware,
it shows something like "Auth Fail"
PS : in Odin mode it is mentionned "Write Protected : true"
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...
Anyone????
i am always getting error at the cm.bin on odin...
i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone
domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?
when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......
my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo
help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1
Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch
palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help
cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5
check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.