Database Info

[New Method] [Official Build] Downgrade to 4.4.2 GPE from 4.4.4. Via Fastboot!!

Right guys firstly i would like to make a massive shoutout to @fl4m3y
Brilliant work on your efforts for the community!!
Without his guide found HERE i would never have been able to leave any 4.4.4 custom rom!
Thankyou friend.
Disclaimer
I am not 100% this will work for you. Use at YOUR OWN RISK.
I will not be held responsible for anyone saying, "omg, my phone had a chance of coming back to life, now your guide has killed it off"
Because that wasn't and isn't the case for me. It has worked 100% STOCK flash by FASTBOOT
95% of this is @fl4m3y credits all thanks go to this guy. Nor will @fl4m3y be blamed as he has stated in his thread. .​Right i will tell you what i did.. everything i did, dont do anything i didnt do. or it probley wont work. same goes for skipping things out.
Firstly
I need you to follow this Guide.
Troubleshooting: (These are some errors i came across, managed to fix them these ways)
The CWM Backup won't push to /sdcard
This happened to me, i don't know why but i managed to fix this by going into 'Mounts and Storage and Mounting STORAGE'
it was unmounted for some reason. Double check this..
It wont start restoring i get MD5 sumcheck failed error.
You need to go into Advance settings in Backup and Restore and uncheck 'check md5sum' (Not sure what it was called just look for something to do with md5sum and make sure there isnt a x next to it)
I Get a Error Resoring /data or /system
go into Backup and Restore and select to do a Custom Restore. Now just as if you where fastboot flashing something, restore each of them speratly..
i started from the top. (Boot.img i think it was then selected to restore and them moved down the list)
now there should be 3 parts to all of them. i went through every single one just to make sure it went well.
so in system there was 3 diffrent files relating to system .. restore them all then move on..
Once you have followed this and your phone has rebooted Sucsessfully you need to download this Official 4.2.2 GPE Fastboot Firmware
Now this is a OFFICIALLY SIGNED FASTBOOT FIRMWARE.. i think thats why it has worked.
The Thread is HERE if you want to look where i found it
Now you need the fastboot files. If you dont have the here they are
I would download them anyways just to make sure its followed exactly how i did it.
I downloaded everything to my Desktop and extracted to my desktop. it makes it easy for me to organise.
Now put your phone into bootloader
Heres for the next part. Extract the Fastboot files into the folder with the Firmware files. There is a .bat file inside that autoflashes everything
Do not press it! We dont need all the files flashed!
Ok so i need you to go to the folder with the firmware in and: Press and hold Right Shift and right click on the file and select to open cmd window here.
Now Type: Fastboot Devices
this is just checking everything is working.
Copy each of these and paste them into your cmd window
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot erase userdata
fastboot reboot
Your phone should Reboot with 100% STOCK GPE.
i am going to try fastboot flash over this a UK Retail Firmware and see what happens.. i will report back if we can now sucsefully flash firmwares other then this one.

@gd91
Confirmed working

Nop its not working for me...I am stuck at google logo...but my moto is xt1033 maybe that is why its not working? ;P

Oh, maybe does everything flash okay?
Sent from my Moto G using XDA Premium 4 mobile app

Yeah everything flashed okay except those warnings that are allways there...restoring backup went well too thx to your guide on how to avoid those mount problems

Guys, can i use this guide to downgrade from GPE 4.4.4 to GPE 4.4.2 and then to stock 4.4.2 ?

No. You will have to wait for 4.4.4 stock partition. And boot loader. Its being pushed out now or soon.. Then you can flash over GPE to stock. This only putbstock GPE back on my phone
Sent from my Moto G using XDA Premium 4 mobile app

Clarkiieh said:
No. You will have to wait for 4.4.4 stock partition. And boot loader. Its being pushed out now or soon.. Then you can flash over GPE to stock
Click to expand...
Click to collapse
People keep saying this, but nobody explains the rationality behind it.
2 things:
1) How does having the 4.4.4 GPE files help in any way with downgrading? If I downgrade, I'd want to downgrade all components, including the bootloader, no? Are you thinking that it is impossible to downgrade the GPT and bootloader after they have been upgraded, even if your bootloader is unlocked, so you would flash the 4.4.4 versions of those but the system partition and modem/baseband from whatever version you want to downgrade to?
2) Even if what you are saying is true, that you would need the 4.4.4 GPT and bootloader in order to perform a successful downgrade to an earlier version, the fact is that the gpt and motoboot files are already available today, extractable from the OTA zip that has been making the rounds. They have already been extracted by others and posted elsewhere. So what more do you need/want out of the 4.4.4 fastboot-flashable release?
-- Nathan

You have miss understood.. We can downgrade to 4.4.2 GPE ( i don't think It was shipped with Jelly Bean) its a dodle
Although!
People who dont want to be on GPE 4.4.2 or 4.4.3 or 4.4.4, and want to go back to the Motorola Stock 4.4.2 will have to wait for the 4.4.4 Stock Motorola update to come to their region ATM it is only hitting certain areas for the time being..
Sent from my Moto G using XDA Premium 4 mobile app

The process will go like this..
Flash GPE 4.4.4 then flash over that the morotorola stock 4.4.4
Sent from my Moto G using XDA Premium 4 mobile app

Clarkiieh said:
You have miss understood.. We can downgrade to 4.4.2 GPE
Click to expand...
Click to collapse
Ah, okay, yes, I guess I did partially misunderstand. But I have been seeing people talk about the problems they have been having downgrading even to 4.4.2 GPE from 4.4.4 GPE. I see that people have stumbled across various convoluted workarounds, but for some reason it is not just as easy as reflashing all of the necessary files while in fastboot. I suspect that the fact that this doesn't work even when trying to go back to 4.4.2 GPE is related to the problems people are having when trying to return to 4.4.2 Motorola.
Clarkiieh said:
People who dont want to be on GPE 4.4.2 or 4.4.3 or 4.4.4, and want to go back to the Motorola Stock 4.4.2 will have to wait for the 4.4.4 Stock Motorola update to come to their region
Click to expand...
Click to collapse
Well, then I still don't understand. If you are running 4.4.4 GPE, why do you have to first flash to 4.4.4 Motorola before downgrading to 4.4.2 Motorola? If you can't go directly to 4.4.2 Motorola from 4.4.4 GPE, what makes you think that having access to 4.4.4 Motorola would make this procedure work? I guess that's the part that is missing for me. Nobody is explaining why they believe that having access to 4.4.4 Motorola will assist in a downgrade to older versions of stock Motorola.
Clarkiieh said:
The process will go like this..Flash GPE 4.4.4 then flash over that the morotorola stock 4.4.4
Click to expand...
Click to collapse
...and then flash 4.4.2 stock Motorola over 4.4.4? Why will that work if flashing directly from 4.4.4 GPE wouldn't?
-- Nathan

GPE and Motorola have totally different file systems.. I dunno.. Its all confusing I haven't really been told myself but just buy reading what others have said and what has worked for me, I cannot flash 4.4.2 over my GPE 4.4.2 that has been brick recovered I need the 4.4.4 boot and gpt.. I think when you convert to 4.4.4 there are files and partitions you cannot flash over unless you have the whole thing. I think the big issue isnt partitions it's the bootloader, I cannot flash any other but 4.4.4 I don't know why eve after flashing 4.4.4 gpt.bin
Sent from my Moto G using XDA Premium 4 mobile app

GPE edition mean only single sim working???

sanads said:
GPE edition mean only single sim working???
Click to expand...
Click to collapse
Yes there is only single sim variant of moto g gpe edition as I know of...

Yes but there are new way people have found
Sent from my Moto G using XDA Premium 4 mobile app

Convert XT1032 to falcon_umts?

I have a Moto G running Android 4.4.2 GPE, I just installed this firmware in Fastboot Mode, everything is fine. However I wanted to update to the latest 4.4.4 via OTA, however, as my Moto was XT1032 before I flashed the firmware I cannot install the OTA, because in TWRP Recovery, I receive a message saying something like "can't install as the OTA is for falcon_umts and your device is XT1032". Any suggestions on how I convert XT1032 to falcon_umts (GPE)? I would rather a method that does not result in me having to reset my device.
Any help is appreciated.
Sent from my XT1032 using XDA Free mobile app

I believe you need to install the OTA using the stock recovery

How to update a rooted Moto G (XT1032) 4.4.4 to 5.0?

Hi,
the title says it all:
How can I apply the 5.0 OTA update on a rooted, unlocked Moto G XT1032 with CWM recovery?
I don't care about root anymore and I have used SuperSU to unroot the phone.
But in order to apply the update I need to install the stock recovery, otherwise the device will get stuck in a bootloop.
How do I do this? I have tried using MotoToolAIO and its "Flash Stock Recovery KitKat" button but get a
Code:
hab check failed for recovery
message every time I try.
Could you guys please tell me how to get the stock recovery installed on this phone? As I said I don't care about losing root and I don't mind relocking the phone if necessary. I would really appreciate any pointers you can give me. Possibly without losing my data & apps. Thank you.
This page apparently is supposed to contain all those stock files but it is broken: http://sbf.droid-developers.org/phone.php?device=14
This manual seems to be helpful for similar cases, it did not help me, though: http://forum.xda-developers.com/showthread.php?t=2542219

Download the stock 4.4.4 ROM for your phone, extract the recovery.img file, and flash it using fastboot commands.
You also need to be unrooted with the stock Motorola apps.

audit13 said:
Download the stock 4.4.4 ROM for your phone, extract the recovery.img file, and flash it using fastboot commands.
Click to expand...
Click to collapse
If you think that solves the proble, well...yes. But where do I find that file? As I indicated the only possible source seems to be unavailable currently. I can't find any other.
Does anyone here have an XT1032 DE singleSIM recovery image lying around?
As I am currently living in South Africa and internet is not reall stable it would be amazing if someone could offer just the recovery file instead of the whole 500-600MB dump.

I have a Canadian xt1032 running stock Telus 4.4.4 firmware. Not sure if that recovery would work but I could find it if you want to try it.
Don't forget to unroot too.

I unrooted too using SuperSU and managed to restore the stock recovery using MotoTool (find it on XDA). These are the basic requirements for installing an OTA. But after the OTA is downloaded and I try to install it, the process starts and in about 10 seconds it displays "Error" and boots to 4.4.4 again. Any recommendations?

^^did you remove any of the stock Motorola apps?

No, and Motorola Update Services is updated to the last version.

audit13 said:
I have a Canadian xt1032 running stock Telus 4.4.4 firmware. Not sure if that recovery would work.
Click to expand...
Click to collapse
I doubt it - and fear what might happen if it goes wrong, to be honest. But thanks a lot for the offer. I was able to locate a Retail package for the DE version and will try to download the whole beast, hoping that the connection is stable for these 3 hours.

Even though nobody answered me, I found out what's going on. Lollipop OTAs cannot be installed on modified devices.

You could try out some custom ROM if you are unable to get the official 4.4.4. Carbon and CM11 are some customs ROMs I know of.
There are great unofficial ROMs on the moto g xda forum too!! Don't forget to have a look.
Sent from my Moto G using XDA Free mobile app

I'm thinking of Resurrection Remix 5.0.2

You could also check out mokee, crdroid, xperience. And don't forget to check out the ROMs in the forum list
Sent from my Moto G using XDA Free mobile app

One question man. I have 4.4.4 installed. Do I have to install stock 5.X in order to get lollipop bootloader before installing any ROM?

dimsar2013 said:
Even though nobody answered me, I found out what's going on. Lollipop OTAs cannot be installed on modified devices.
Click to expand...
Click to collapse
how did you manage to un-modify your device? I just bought the Moto G (2013) and have unlocked the bootloader and installed TWRP and haven't had any luck installing ANY firmware after 4.4.4.... I'm always getting stuck on the bootlogo and have to return back to stock 4.4.4...

pables69 said:
how did you manage to un-modify your device? I just bought the Moto G (2013) and have unlocked the bootloader and installed TWRP and haven't had any luck installing ANY firmware after 4.4.4.... I'm always getting stuck on the bootlogo and have to return back to stock 4.4.4...
Click to expand...
Click to collapse
You need to have factory firmware and recovery installed in order to update via OTA.
Sent from my XT1031™

need help ...boost mobile

Long story short, upgraded moto g xt1031 boost mobile to soak test .rooted phone then got a message about a new update.can't install the update cause I was rooted.tried unroofing ,installed a custom recovery to wipe everything then reflashed stock recovery. Then DL the stock lollipop rom and it won't install saying it was expecting 4.4 or something like that.
Anyways how can I get stock lolipop back on my device?

russ722 said:
Long story short, upgraded moto g xt1031 boost mobile to soak test .rooted phone then got a message about a new update.can't install the update cause I was rooted.tried unroofing ,installed a custom recovery to wipe everything then reflashed stock recovery. Then DL the stock lollipop rom and it won't install saying it was expecting 4.4 or something like that.
Anyways how can I get stock lolipop back on my device?
Click to expand...
Click to collapse
As far as I know there is NO stock lollipop release for boost mobile moto g. The reason its giving you that message is because its trying to update your boot loader, but your not on the stock KitKat that came with your phone.
Sent from my XT1031 using XDA Free mobile app

EpicLordPhone said:
As far as I know there is NO stock lollipop release for boost mobile moto g. The reason its giving you that message is because its trying to update your boot loader, but your not on the stock KitKat that came with your phone.
Sent from my XT1031 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, until they release a full firmware I think you would need to fastboot flash back to Boost stock 4.4.4 without root to take an OTA.
If you have 41.19 bootloader, you will have to skip motoboot and gpt, of course
Let us know if you figure it out, as I suspect this will become a common issue once official firmwares start rolling out (if they ever do!)
Sent from my Moto G using XDA Free mobile app

Got it back to 4.4..4 by following this thread ,not sure exacty what did it but had fully working KitKat afterwards I upgraded back to lollipop with no issues.
http://androidforums.com/threads/cdma-i-really-need-help-right-now-please.888145/page-2
I had a script based KitKat file ,I got somewhere off XDA awhile back. I used to restore the phone.

OTA updates and TWRP

Hi everyone! I have a 2013 MOTO G (XT1032) with unlocked bootloader. I installed TWRP so I could flash the GPE version of 5.1. A few weeks ago, I received a notification that I could install the November 2015 patches, but every time I download them and choose to install, the phone reboots and instead it goes straight to TWRP.
My question is... how do I install the OTA updates? do I have to remove TWRP? is that easy?
thanks a lot!

For ota , stock recovery is must
Sent from my Moto G using Tapatalk

sathish saju said:
For ota , stock recovery is must
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Do you think it would be easy to switch to stock recovery, flash the ota, and go back to twrp?

jajandio said:
Do you think it would be easy to switch to stock recovery, flash the ota, and go back to twrp?
Click to expand...
Click to collapse
If u want ota to b success , u should do
Sent from my Moto G using Tapatalk

I have done (return to stock recovery). It gives an error during the update- android toy wit an exclamation mark and `error' below. I it's seems it requires an original stock room.

You need an unmodified /system folder.
Try my Optimized GPE ROM: http://forum.xda-developers.com/showthread.php?p=58538831