[4.2.2] 15.3.A.1.17 Deodexer

[4.2.2] 15.3.A.1.17 Deodexer - Sony Xperia L

I've seen a handful of posts here about deodexed stock ROMs, but I haven't seen a ROM deodexer itself. Thus, here is a tool that deodexes your ROM after flashing your firmware. Tested on 15.3.A.1.17.
Wipe /data (optional, but recommended)
Flash the ZIP through recovery
Wipe the cache and the dalvik cache
Reboot
Cheers!
DOWNLOAD

stock rom
we should be running the stock rom to flash this

Related

[SC-04E] How to Flash Custom Rom on SC-04E

This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!AYJjzA6S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.

Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE

Reserved
Reserved

adagiov said:
Reserved
Click to expand...
Click to collapse
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!

Gargoyles said:
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Click to expand...
Click to collapse
You can download the Baiduyun Application to downlad the related files. Problem might occur because it is a Chinese skydrive. And I will upload to other skydrive if Baiduyun skydirve does not work.
Please advise specific skydrive if you know.

Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo

mvstark98 said:
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
Click to expand...
Click to collapse
try to enter in recovery and wipe cache and data.

Thank you so much for this post.
I have managed to update to Omega V40 on my sc-04e.
And I am able to use spmode, camera and wifi.

adagiov said:
Please Leave your problem or feedback below.
Click to expand...
Click to collapse
fix link,please,thank u

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry, I have no idea what else link is available to both you and me.

verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry for the late reply, I tried to fix the link via Mega.

Hi,i would really appreciate it if you could just spare some few minutes of your time to help me out with my phone.
So I bought this barely used Samsung Galaxy S4 (i9505) from a guy. It came with android 4.2.2 and a boatloader/Baseband of SC04E0MUAMG2 and when I boot on it shows ntt-DoCoMo before booting up (so am guessing it was locked before, it came unlocked because every SIM I have tried has worked, and also it came rooted).
The issue is I really want to upgrade to Stock Lollipop or a custom lollipop rom like Aurora or Albe95 roms, but each time I try flashing a stock rom using Odin, it says fail (usually its when it gets to ' NAND write start, Auth fail '). Since Stock refused working I decided to try Flashing a custom rom using a custom recovery, it flashed successfully but when I tried flashing the modem and boatloader for the custom Rom, Odin would show fail again, I tried if on every port on my system and even unticked F.reset and auto-reset, but the result was still fail.
So I bought mobile odin pro to try out the stock again, it did install the stock but it was buggy, camera wasn't working, Mic wasn't working, the back button wasn't working. I just had to remove it. Currently am on Imperium 12.1 custom Rom( i installed it because it didn't require flashing modem and boatloader. The only problem is camera and Mic still won't work on this rom, but when I go back to the backed-up android 4.2.2 everything works fine. So yeah, that's my predicament. I am clueless as to what to do next so please help me out. I would really like to use a stock or custom Rom.

Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.

adagiov said:
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Click to expand...
Click to collapse
hefp: kernel SC-04E for miui 4.4.2 ?????

DaveHert said:
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
Click to expand...
Click to collapse
If you want to use stock lollipop rom, you have to flash the lastest offical rom(SC04EOMUGOI4 ).
First, you flash the stock rom, you will find everything works well except back and menu button. If you have other problem(eg. wifi does not work), you may try flash the stock rom again.
Second, fix the back and menu button problem. You can find solution here.
Then, you can enjoy the stock lollipop rom.
If you want you try other custom rom based on lollipop rom. Please follow this post.
And you have mentioned, your odin did not work via PC, sometimes it is caused by usb cable. You can try with a replaced cable, buy one or two repalced usb calbe, and usually it will help you solve the problem.
If repalced usb cable can not work, you can try with other computers.

dunglt said:
hefp: kernel SC-04E for miui 4.4.2 ?????
Click to expand...
Click to collapse
Here is the Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg

adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Help: I need kernel miui v7 for sc-04e

vitnamese fixed rom 4.4.2 is here password is 0915710079
http://4share.vn/f/7a494f484a4b434b/affiliate/2021884
problem is i cannot download this file, if some one can please let me know

HELP
hey brothers , can you help me to use xposed in my sc-04e docomo in 5.0.1 albe rom ?
and any one use docomo sc04e can use NFC ? tq. regards

Phone very "laggy" with stang5litre rom

I just flashed my wife's Galaxy S4 (SCH-I545 ) with stang5litre's Lollipop rom (see: http://forum.xda-developers.com/galaxy-s4-verizon/development/stang5litre-ediition-5-0-t3132555).
I have the NK4 bootloader with Safestrap installed. The previously installed stock OS was 4.4.2. I installed Stang5litre's rom over the exising ROM using SS (in other words, I DID NOT use a new ROM slot).
The method I used was (from the ROM's announcement page):
If coming from any Rom Before OC1 Ex 4.4.2 or Below
1. Boot into SS
2. Flash stang5litre 5.0 Edition v2NON-MDK Rom.zip
3. Flash OC1_firmware.zip
4. Flash SuperSU v2.49 Beta
5. Flash OC1 SS/FF Flashable kernel.zip
6. Reboot system.
Everything seems to be working okay, but the apps take 10+ seconds to open. Once open they seem to run normally.
Any suggestions?
Also, the instructions included nothing about wiping the phone before flashing, so I did not do it.
Should I have?
Would this ROM/method still work if I did a wipe to factory settings before installing?Thanks.

You apply al wipes? Data,system,caché, dalvik cache?

Detailed Instruction On how to install any custom rom

Guys I have seen many members who are asking silly questions in development thread about installation. This is a detail guide about installation.
If you are in miui
The steps are
1.flash miui 6.6.10
2.Root mi4i using mi4i toolkit
3.then flash twrp recovery using the same
4.now flash your custom rom and gapps using twrp recovery
If you are in cyanogenmod
1.simply flash rom using twrp
Note:it is important to wipe cache, dalvik cache and data before installation in both the cases

Compatible MIUI versions for flashing are 6.6.10, 5.6.11, 5.7.13....
Also you don't need to root before flashing TWRP.

How to flash stock ROM in XT1040?

Hi, I've read many guides on how to flash stock roms and stuff, but I'm still not sure how to do it in my case.
I bought an XT1040 from a guy and it came with bootloader unlocked and Lollipop 5.0.2 (CM 12-20150126-NIGHTLY-peregrine)
I wanted to install the stock LP rom, but then I found an optimized version on this thread: http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816 I think that would be better, but the problem is I'm following this guide to install a stock rom: http://forum.xda-developers.com/showthread.php?t=2542219 but it says you have to flash every file, one by one, yet this .zip I downloaded (Retail Latin America 5.1 ROM (Optimized) v1.0a (331mb)) only has a "boot.img" and some folders named "supersu", "system" and "META-INF". Does that mean I have to flash the whole ZIP in the recovery? (oh and btw I installed TWRP v2.8.7 [recoverytwrp2-8-7encryption.img] using adb, I didn't wipe the other recovery with "fastboot erase recovery" because this had CWM already installed... is that okay?)
What should I do?
In short:
I have a bootloader unlocked phone with Lollipop 5.0.2 (CM 12-20150126-NIGHTLY-peregrine) and CWM
I flashed TWRP v2.8.7 without wiping recovery (at least I think that's what "fastboot erase recovery" does)
I want to flash a stock rom (optimized) with LP 5.1 from here http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816 (Retail Latin America 5.1 ROM (Optimized) v1.0a (331mb)) but I'm not sure what to do.
Thanks.
_______________________________________
I just decided to do what the guide said:
1) Boot into latest TWRP and Format Data (Wipe > Format DATA > Yes) - This step is essential, and will wipe Internal Storage (Downloads, Music, Photos etc, **backup important files**)
2) Transfer ROM to SDCARD or Internal Storage. This may be done in Windows via MTP, or using adb sideload or adb push ROM.zip /sdcard/
3) TWRP > Wipe > Factory reset and flash ROM.
4) Reboot.
5) Call / WiFi issues can be solved by flashing 5.1 Radio Firmware (Below) for your Model.
now I'm in the step 3, trying to flash the ROM but the bar doesn't fill at all...
_________________________________________
Lol that was me panicking, the device managed to flash the ROM and it's working now, I also flashed the radio firmware so I have working WiFi, but the screen flickering keeps happening each time I reboot the device.
I'll probably want to downgrade in the future... any tip on that would be appreciated.

You don't need to use Fastboot other than when changing TWRP version. Simply flash the Optimized Stock ROM (or any custom ROM) via TWRP. Screen flickering is caused by not having updated your Bootloader - this utility will do that for you: Bootloader Upgrader Tool.
I highly recommend you try the following optimized Stock Marshmallow ROM: (It's faster than Lollipop)
[ROM][PEREGRINE][6.0][STOCK] Identity Crisis 6 LTE v1.3b

How to flash custom rom?

Guys, i want flash a custom rom.
Someone write me full instructions?
Ex; Mi bootloader unlock etc.

unlock bootloader
Install twrp which i wont recommend because its unstable one and wait for official twrp if u don't want bootloop
after twrp ,mount all storage, clear all data ,cache but don't erase system data then flash Custom rom zip file and restart

Twrp is not working properly with Xioami.eu roms because Google change their code and kernel , better wait for new working TWRP and new realize

There are plenty guides on unlocking and flashing TWRP. I would suggest to not upgrade to A11 to avoid TWRP issues. What I did from stock A10 using Chinese TWRP:
Flash required stock rom base,
Flash custom rom,
Flash Gapps if required,
Flash magisk,
Format data,
Reboot.

Database Info

welcome