Ihave rogers galaxy note edge and does anyone know where to find the stock rom?!??!
I've been searching for 3 hours...
There isn't any yet.
Hopefully it will become available on Sammobile soon.
you can pull it yourself using Kies. I posted a tutorial on her in the question forum.
2swizzle said:
you can pull it yourself using Kies. I posted a tutorial on her in the question forum.
Click to expand...
Click to collapse
Doesn't seem to work with a custom recovery [emoji53]. If anyone can successfully pull the image and share it would be greatly appreciated!
dlghgus09 said:
Ihave rogers galaxy note edge and does anyone know where to find the stock rom?!??!
I've been searching for 3 hours...
Click to expand...
Click to collapse
I Also have been searching, as our Canadian version has a screwed up rom... Wifi not working properly, freezes after a few days,. wakelocks and sleep issues.. Ive gone thru 2 phones sofar and still problems..
Its definitely the Rogers rom,... What Rom version are you on?? The 1st and now 2nd has n915w8vlu1a0a7, was there a higher update?
Are all the Canadian n915w8's on Lollipop 5.0.1?
bballengphd said:
Are all the Canadian n915w8's on Lollipop 5.0.1?
Click to expand...
Click to collapse
no they are on 4.4
no word of any update yet either
JF-GINO said:
I Also have been searching, as our Canadian version has a screwed up rom... Wifi not working properly, freezes after a few days,. wakelocks and sleep issues.. Ive gone thru 2 phones sofar and still problems..
Its definitely the Rogers rom,... What Rom version are you on?? The 1st and now 2nd has n915w8vlu1a0a7, was there a higher update?
Click to expand...
Click to collapse
Look in tho these sites, as per the Tech Specs, the N915T and N915F are identical to our N915W8. Both stock version are available at Sammobile (915f and 915t )
http://www.mobosdata.com/samsung-gal...-edge-sm-n915f
http://www.mobosdata.com/samsung-gal...-edge-sm-n915t
http://www.mobosdata.com/samsung-gal...edge-sm-n915w8
I have the n915t (because I was not sure if Canada was actually going to get it) that runs perfectly on ROGERS LTE, Fido LTE, Bell (Telus) LTE,WIND (no LTE since they do not have it in Calgary), and T-mobile (since it's a T-mobile phone) (these are the SIMS it has successfully used).
I was trying to find out if it was similar to n915g and n915s (so at least you state (based on that mobosdata) that the n915t it is equivalent to the n915f and n915w8 in terms of hardware (does that also include the modem / radio?). I ask since I wanted to put the 915g Lollipop on it (I would have to change the sales code from TMB to XSA I think).
I tried your mobosdata links but they all come back 404 error.
crazyut said:
I have the n915t (because I was not sure if Canada was actually going to get it) that runs perfectly on ROGERS LTE, Fido LTE, Bell (Telus) LTE,WIND (no LTE since they do not have it in Calgary), and T-mobile (since it's a T-mobile phone) (these are the SIMS it has successfully used).
I was trying to find out if it was similar to n915g and n915s (so at least you state (based on that mobosdata) that the n915t it is equivalent to the n915f and n915w8 in terms of hardware (does that also include the modem / radio?). I ask since I wanted to put the 915g Lollipop on it (I would have to change the sales code from TMB to XSA I think).
I tried your mobosdata links but they all come back 404 error.
Click to expand...
Click to collapse
http://www.mobosdata.com/samsung-galaxy-note-edge-sm-n915w8
crazyut said:
I have the n915t (because I was not sure if Canada was actually going to get it) that runs perfectly on ROGERS LTE, Fido LTE, Bell (Telus) LTE,WIND (no LTE since they do not have it in Calgary), and T-mobile (since it's a T-mobile phone) (these are the SIMS it has successfully used).
I was trying to find out if it was similar to n915g and n915s (so at least you state (based on that mobosdata) that the n915t it is equivalent to the n915f and n915w8 in terms of hardware (does that also include the modem / radio?). I ask since I wanted to put the 915g Lollipop on it (I would have to change the sales code from TMB to XSA I think).
I tried your mobosdata links but they all come back 404 error.
Click to expand...
Click to collapse
Did you tried n915t on your n915w8 ?
[email protected] said:
Did you tried n915t on your n915w8 ?
Click to expand...
Click to collapse
+1 on that question, has anyone done it yet?
Tried. Doesn't work.
Still waiting for official firmware. I mean come ON Samsung.
Anyone get software update to lollipop for their devices?
It's 5.1.1 http://samsung-firmware.org/download/GALAXY-NOTE-EDGE/0pw1/RWC/N915W8VLU1BOG5/N915W8OYA1BOG5/
http://www.sammobile.com/firmwares/database/SM-N915W8/
5.1.1 - N915W8VLU1BOK2 available now for all Canadian Carriers. Finally!
Related
Since the galaxy s6 edge has the exynos 7420 cpu does that mean international roms will work on US carriers? just have to change the APNs?
xSkyFlasherx said:
Since the galaxy s6 edge has the exynos 7420 cpu does that mean international roms will work on US carriers? just have to change the APNs?
Click to expand...
Click to collapse
I have been wondering the same thing. Have you gotten any further with this?
I'm in South America and would like to flash an INT ROM hoping to get LTE working here. LTE Band where I am right now is 1900 mhz. Would flashing an INT ROM "unlock" the phone for that? Are there other "consequences" that one should be aware of when flashing an official International ROM? Any comment on this is appreciated :good:
YANAPAWAY said:
I have been wondering the same thing. Have you gotten any further with this?
I'm in South America and would like to flash an INT ROM hoping to get LTE working here. LTE Band where I am right now is 1900 mhz. Would flashing an INT ROM "unlock" the phone for that? Are there other "consequences" that one should be aware of when flashing an official International ROM? Any comment on this is appreciated :good:
Click to expand...
Click to collapse
no i haven't found any information on it sadly :/
Im searching information about too. I tried install some 925F roms then flash 925p kernels but no luck. GPS not working, data/voice not working, even no mobile operator setting in setup.
You would need more than just download and flash!!! You need to port libs, xmls, framework, apps etc to make it compatible with Sprint
Anyway of getting a sprint compatability zip?
gypsy214 said:
You would need more than just download and flash!!! You need to port libs, xmls, framework, apps etc to make it compatible with Sprint
Click to expand...
Click to collapse
Thanks for the info. In my case I don't need to make it compatible with Sprint since I'm in South America. Any suggestions on how to flash an official International G925 Rom?
I think that will happens only when somebody write unified kernel for F/I/*/*/*/and P version of this phone. I researched this and found that noone from kernel makers want not do this. In nearby thread one programmer offer to try modified bootloader for 925p (to be able rollback to 5.0.2). He can't even find testers(. No one want brick their phones.
Animalityy said:
I think that will happens only when somebody write unified kernel for F/I/*/*/*/and P version of this phone. I researched this and found that noone from kernel makers want not do this. In nearby thread one programmer offer to try modified bootloader for 925p (to be able rollback to 5.0.2). He can't even find testers(. No one want brick their phones.
Click to expand...
Click to collapse
Not true..... People have been testing bootloaders. Still more work done to be done to it. There have been about 5 testers
Soooperstar said:
Not true..... People have been testing bootloaders. Still more work done to be done to it. There have been about 5 testers
Click to expand...
Click to collapse
Sorry. Didn't know that. Wish you luck in bootloader unlocking.
S6 G920F roms on S6 G920P?
Dear users
I would like to have S6 International roms on my S6 Sprint but I can't,
is there a compatibility for sprint file to fix the other touch screen and other processor (exynos and snapdragon)?
Please, can anyone reply if you know it?
PS: Sorry for my English, it's not good.
I'm about to pull the trigger on buying the S7 and (thanks to this forum) have researched the (T-mobile) "carrier" version with SnapDragon processor vs. the International non-carrier version with Exynos processor. Seems like the latter is generally preferred, with 2 drawbacks:
1) Not compatible with T-Mobile's wifi calling;
2) No VOLTE
My only remaining questions are:
1) It seems as though with most unlocked / non-carrier smartphone models, custom ROMs are usually made available that enable carrier-specific features, but it seems like no such ROMs have yet been developed and widely circulated to enable T-Mobile's wifi calling or VOLTE. Is it typically just a matter of WHEN, rather than IF, such ROMs usually get into circulation? IOW, even though I'll be without those features on the Exynos S7 for now, can I buy the phone with confidence that in the not too distant future there SHOULD be a ROM to enable these? (Wifi calling is actually rather important to me since my gf's apt is a dead zone.)
2) Can someone ELI5 VOLTE to me? I'm still note entirely sure what it is / does, and want to evaluate how much I should care if my Exynos S7 doesn't support this...
Exynos does support volte. I am using it and it works fine.
Sent from my SM-G930FD using Taptalk
I just saw this post that may interest you.
http://forum.xda-developers.com/showpost.php?p=68826415&postcount=2
Check out tkkg's CSC
droidn00b1 said:
I'm about to pull the trigger on buying the S7 and (thanks to this forum) have researched the (T-mobile) "carrier" version with SnapDragon processor vs. the International non-carrier version with Exynos processor. Seems like the latter is generally preferred, with 2 drawbacks:
1) Not compatible with T-Mobile's wifi calling;
2) No VOLTE
My only remaining questions are:
1) It seems as though with most unlocked / non-carrier smartphone models, custom ROMs are usually made available that enable carrier-specific features, but it seems like no such ROMs have yet been developed and widely circulated to enable T-Mobile's wifi calling or VOLTE. Is it typically just a matter of WHEN, rather than IF, such ROMs usually get into circulation? IOW, even though I'll be without those features on the Exynos S7 for now, can I buy the phone with confidence that in the not too distant future there SHOULD be a ROM to enable these? (Wifi calling is actually rather important to me since my gf's apt is a dead zone.)
2) Can someone ELI5 VOLTE to me? I'm still note entirely sure what it is / does, and want to evaluate how much I should care if my Exynos S7 doesn't support this...
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s7/development/utility-flashable-csc-selection-30-t3392949
T-Mobile volte and wifi calling appears to be working with this csc
Have both working on my g930f.
tyrone1 said:
Have both working on my g930f.
Click to expand...
Click to collapse
Would you mind explaining how you got it working? Did you have to do anything other than change your CSC? I changed my CSC to T-Mobile US and I now have the option to enable wifi calling, however when I turn it on it just hangs there saying 'Enabling'.
Kejay3190 said:
Would you mind explaining how you got it working? Did you have to do anything other than change your CSC? I changed my CSC to T-Mobile US and I now have the option to enable wifi calling, however when I turn it on it just hangs there saying 'Enabling'.
Click to expand...
Click to collapse
Did you change it with that CSC changer v1.7?
That is really all I did. Install n7 rom then change CSC to TMB.
tyrone1 said:
Did you change it with that CSC changer v1.7?
That is really all I did. Install n7 rom then change CSC to TMB.
Click to expand...
Click to collapse
Yep that's what I used. I did a clean install of the SuperMan rom and used CSC changer again...same issue, it hangs at Enabling. Even went back to stock rom and it does the same thing.
Finally, I installed the Note 7 OnTheEdge rom like you said and it appears to be working, I now see the wifi calling notification at the top left and I get the volte icon when i'm not connected to wifi. I wonder if anyone has been able to get it to work on other roms?
Kejay3190 said:
Yep that's what I used. I did a clean install of the SuperMan rom and used CSC changer again...same issue, it hangs at Enabling. Even went back to stock rom and it does the same thing.
Finally, I installed the Note 7 OnTheEdge rom like you said and it appears to be working, I now see the wifi calling notification at the top left and I get the volte icon when i'm not connected to wifi. I wonder if anyone has been able to get it to work on other roms?
Click to expand...
Click to collapse
I've only tried it on n7rom mentioned above. Guess it has to do with the rom since not working in Superman rom.
Kejay3190 said:
Yep that's what I used. I did a clean install of the SuperMan rom and used CSC changer again...same issue, it hangs at Enabling. Even went back to stock rom and it does the same thing.
Finally, I installed the Note 7 OnTheEdge rom like you said and it appears to be working, I now see the wifi calling notification at the top left and I get the volte icon when i'm not connected to wifi. I wonder if anyone has been able to get it to work on other roms?
Click to expand...
Click to collapse
tyrone1 said:
I've only tried it on n7rom mentioned above. Guess it has to do with the rom since not working in Superman rom.
Click to expand...
Click to collapse
Hello @Kejay3190 @tyrone1
Im currently looking for this too.. i've g930FD .. i want Volte .. already flashed tmobile usa csc and UK tmobile csc .. i get 4gLte Signal but not LTE .. wifi calling toogle appeared but didnt work because of a wrong sim card (im not in the us) .. so ontheedge rom now is nougat based but i want to keep marshmallow because of xposed... have any of you guys managed to get volte working and which custom rom / modem and csc are you using to get this working? .. i appreatiate very much your help.
leboreiro said:
Hello @[email protected]
Im currently looking for this too.. i've g930FD .. i want Volte .. already flashed tmobile usa csc and UK tmobile csc .. i get 4gLte Signal but not LTE .. wifi calling toogle appeared but didnt work because of a wrong sim card (im not in the us) .. so ontheedge rom now is nougat based but i want to keep marshmallow because of xposed... have any of you guys managed to get volte working and which custom rom / modem and csc are you using to get this working? .. i appreatiate very much your help.
Click to expand...
Click to collapse
It works now. I do super man rom. Search that thread how to do it. You have to flash zto csc then boot then flash TMB csc. Then Switch a couple toggles.
I'm thinking of getting an Galaxy S7 (T-Mobile version, SM-G930T) for my wife to replace her Nexus 4 which is on T-Mobile prepaid but my concern is "carrier bloat" that T-Mobile installed on the phone.
1. Is it possible to convert this phone to the regular US/stock version of the S7 which i believe is SM-G930UZKAXAA, I believe? I did some Googling and I see some discussions about "Odin" which I assume is the software to flash/convert the SM-G930T to the SM-G930U version?
2. Will Samsung Pay still work after converting it from the T-Mobile version to the US/stock version?
3. Any issues/disadvantages/problems to be aware of between the T-Mobile specific and non T-Mobile firmware to consider, in consideration of whether or not to convert?
Thanks, David
G930U and G935U firmware is maded for any US version that IS ALREADY UNLOCKED and want to convert it so you can remove all bloat preinstalled apps from the carrier and use the phone like it was G935F or G930F..
1- you can flash the U firmware on any US varaint Sprint, T-Mobile, ATT, but will REQUIRED a unlocked cell, and the bootloader had to be low or same as the U you want to flash.
2- will work, i already test it.
3- none, the U firmware is official from samsung and is created for that.. to be flashable on S7 unlocked for take it for overseas.
PS: its the same as g930F so mobile data icon will be enable, wifi call will not be there... and you can use bluetooh sharing.. etc.. but t-mobile features will be removed, if you have more experience you can enable them back.
Serge Winters said:
G930U and G935U firmware is maded for any US version that IS ALREADY UNLOCKED and want to convert it so you can remove all bloat preinstalled apps from the carrier and use the phone like it was G935F or G930F..
1- you can flash the U firmware on any US varaint Sprint, T-Mobile, ATT, but will REQUIRED a unlocked cell, and the bootloader had to be low or same as the U you want to flash.
Click to expand...
Click to collapse
the phones does NOT have to be unlocked
onedollarinmywallet said:
I'm thinking of getting an Galaxy S7 (T-Mobile version, SM-G930T) for my wife to replace her Nexus 4 which is on T-Mobile prepaid but my concern is "carrier bloat" that T-Mobile installed on the phone.
1. Is it possible to convert this phone to the regular US/stock version of the S7 which i believe is SM-G930UZKAXAA, I believe? I did some Googling and I see some discussions about "Odin" which I assume is the software to flash/convert the SM-G930T to the SM-G930U version?
2. Will Samsung Pay still work after converting it from the T-Mobile version to the US/stock version?
3. Any issues/disadvantages/problems to be aware of between the T-Mobile specific and non T-Mobile firmware to consider, in consideration of whether or not to convert?
Thanks, David
Click to expand...
Click to collapse
I use a stock US galaxy s7 from T-Mobile, SM-G930T. From what I can tell it shouldn't cause any problems as it's not a custom Rom but stock firmware you can download directly from Samsung website.
I did some searching and found a few posts about sm-g930u extending battery life over sm-g930t with tmobile bloatware (can't say for certain as I've not tried myself).
In all it shouldn't harm functionally since it's stock firmware.
Hope this helps.
[email protected] said:
I use a stock US galaxy s7 from T-Mobile, SM-G930T. From what I can tell it shouldn't cause any problems as it's not a custom Rom but stock firmware you can download directly from Samsung website.
I did some searching and found a few posts about sm-g930u extending battery life over sm-g930t with tmobile bloatware (can't say for certain as I've not tried myself).
In all it shouldn't harm functionally since it's stock firmware.
Hope this helps.
Click to expand...
Click to collapse
I extensively tested the U firmware before moving to T firmware (because I moved to the T-M side of Tracfone; the phone itself is ex-VZW); I have had exactly zero issues (with either U firmware or T firmware).
A tidbit; as a SM-G930T, you have access to both VoLTE *and* wi-fi calling - this was not the case for even VZW-native customers, let alone MVNO customers. (This has, in fact, been covered in the Verizon Wireless thread for the same phone.) It does not matter if you are merely using an MVNO (such as Tracfone). NO free Netflix, though. (Mice.)
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Yea, the G955FD is the dual SIM Exynos variant, right?
I'm sure the dual SIM uses the same firmware as the single SIM, so you should have no worries flashing Aussie firmware.
But I would suggest you flash the XSA (Aussie unbranded) firmware, not Telstra firmware. You'll lose nothing, but you'll get faster updates.
the_scotsman said:
Yea, the G955FD is the dual SIM Exynos variant, right?
I'm sure the dual SIM uses the same firmware as the single SIM, so you should have no worries flashing Aussie firmware.
But I would suggest you flash the XSA (Aussie unbranded) firmware, not Telstra firmware. You'll lose nothing, but you'll get faster updates.
Click to expand...
Click to collapse
I thought as much, thanks so much for clarifying. I will download the XSA firmware as well.
Thanks
I'm using Metro PCS service on a Singapore XSP and experiencing some terrible 4G service. Is there anything I can do about this, looked perhaps flash smother CSC onto my 955FD?
michel5891 said:
I'm using Metro PCS service on a Singapore XSP and experiencing some terrible 4G service. Is there anything I can do about this, looked perhaps flash smother CSC onto my 955FD?
Click to expand...
Click to collapse
Flash a different baseband.
Sent from my S8+, S7 edge or S6
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
ProbablyRaging said:
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Click to expand...
Click to collapse
Im running F firmware on my FD now...its the same thing.
Sent from my S8+, S7 edge or S6
ProbablyRaging said:
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Click to expand...
Click to collapse
The phone will work pretty much fine provided
1 - Exact Same hardware . you can use snapdaragon ROMs on Snapdragon Devices and vice versa for Exynos .
2 - Same network Bands supported . The ROM contains the programs on how to operate in different frequencey bands .
If i helped you , hit the thanks button ! :laugh:
Same probem Can you help me
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Janettef said:
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Click to expand...
Click to collapse
I don't know how you can own a device and not know whats in it lol.
Anyway it is exynos and firmwares can be found at sammobile.com
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955FD/
sent from my Pixel 2 XL or Note FE
Janettef said:
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Click to expand...
Click to collapse
Here's the XSA (Australia) firmware:
http://updato.com/firmware-archive-select-model?record=0C53FCC1D0CA11E7A5F9FA163EE8F90B
Flash it. Doesn't matter if your device is G955F or FD, the ROMs are exactly the same.
Does the method works with G955J SCV35 model? I'm running NTDocomo firmware on KDDI model to unlock network (single SIM) . I wan't to flash unlocked U firmware but getting scared that the phone will be bricked.
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
that1guyty said:
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
Click to expand...
Click to collapse
If your on FirstNet I recommend that you stay on ATT branded software, I'm not sure if band 14 will work properly for you if you are on unlocked software. Thank you for your service!
ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
rjohnstone said:
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
Click to expand...
Click to collapse
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
droppinbaums said:
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Click to expand...
Click to collapse
My comment was made before we were able to change IMS settings directly.
You can get it all now. VoLTE, WiFI Calling, RCS, Video calling...
Verntd3 said:
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
Click to expand...
Click to collapse
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
rjohnstone said:
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
Click to expand...
Click to collapse
Ok thanks, according to this I assume I have the U1....?
Verntd3 said:
Ok thanks, according to this I assume I have the U1....?
Click to expand...
Click to collapse
Yes, based on screenshot, you have U1
warriorvibhu said:
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
Click to expand...
Click to collapse
So i can flash rom n986u1 on N986u ?
romano_ezzat said:
So i can flash rom n986u1 on N986u ?
Click to expand...
Click to collapse
Yes you can, please look for instructions I have posted instruction on this device forum to go from U to U1 and vice versa