Database Info

Advice Needed On How To Root ANDROID 2.1 Eclair Tablet

I have one of those cheap chinese knockoff tablets running:
2.1 update1
model number:
Android for Telechips TCC8900 Evaluation Board (US)
Kernel Version:
2.6.29
[email protected] #205
Build Number
telechips_tcc8900_cn-eng 2.1-update1 ECLAIR eng.root.20100711.224454 test-keys
its this one: http://www.aliexpress.com/product-gs/328845326-dual-core-7-mid-wholesalers.html
the specs are:
TCC8902, ARM11 architecture processor
800MHz
Support hardward 3D graphics acceleration
Memory
DDR II RAM 256MB
128MB Virtual Cache
Storage
4GB Nand Flash, 128MB available to users
support SD/SDHC card with a maximum capacity of 32GB
If anyone has ANY idea on how to gain root access or a=even any hints it would be greatly appreciated.
I tried the exploid method of the DROID X and it was no go.
Thanks in advance..

grdm said:
If anyone has ANY idea on how to gain root access or a=even any hints it would be greatly appreciated.
I tried the exploid method of the DROID X and it was no go.
Thanks in advance..
Click to expand...
Click to collapse
The only thing I could suggest is trying the rooting methods of other phones until one works (or finding your own exploit). Of course for the update.zip ones you would need to recompile them for your device.

i figured it out actually, surprise to me.. he he
now i have another question, is there a way to install a compatible google market?
vending.apk keeps failing on the install

Grdm,
If you wouldn't mind explaining how you did it I am sure there are others who could benefit from your experience...
thanks!

I presume that I have the same tablet (at least i have the same specs), so it would be awesome if you could tell me how you made it through.
haina

I'm also interested. Please share. Or PM.

Extremely interested as well been looking online and can't seem to find any info i found a couple of things in chinese that i tried to translate but too much for me if someone can decipher them they may be of help. Here is the website it can be easily translated to english with google translate
huashiguang.com/service.html

for people trying to root mid7005 tablets with 2.1update1
look for {z4root } rooted my coby kyros tablet 2.1update1

I have tried to find 4zroot with no luck.
I have found references saying to download it from the Market, but that's why I need to root. So I can get the Google Android Marketplace.
Does anyone have a less cryptic answer as to where to find 4zroot?
Edited to add:
I figured it out. It's z4root, not 4zroot
Update2:
z4root did not seem to work. After running z4root successfully still can't load YouTube app or Vending.apk, as well as other apps that need root.

Coby Kyros MID7015
Hey guys any luck on how to root this device, Will XDA form a section for this tablet. It has been a popular device this holiday.

Hey guys hope this helps
Haven't got mine yet to test but seems like we have a winner!
http://forum.xda-developers.com/showthread.php?p=9553149#post9553149

I purchased android 2.1 7" apad, z4root works for me.
root now.
Then I want to apps2D scripts & custom ROM pls. Anyone can share.
thanks

grdm said:
i figured it out actually, surprise to me.. he he
now i have another question, is there a way to install a compatible google market?
vending.apk keeps failing on the install
Click to expand...
Click to collapse
Could you tell everyone how you did it..? Thanks.

Any news ? I have the same specs and I want to root my device too. Can you share some pointers or perhaps a tutorial ? Please !

try z4root it worked great for me.

[Q] "A9 NEC RENESAS EMMA V2 Dual Core Android 2.2 Tablet" review anyone?

Hi guys!
Since I didn't find any review to the "A9 NEC RENESAS EMMA V2 Dual Core Android 2.2 Tablet" offered in the (german) cect-shop, I was wondering whether someone already bought and tried it. Specs are quite nice, IMHO and videos on youtube look promising. Can someone share his experience with that tablet?
Thanks in advance.

Rena3 Reply
Hi,
I personally have the device and the experience so far has been good using the device.
There is a whole bunch of information over at slatedroid page where there is a group of active users.
Sorry but my post is very little so you have to head over at slatedroidpage, please replace the dots with "."
www dot statedroid dot com/forum/204-rena/
Perhaps someone wants to start a thread over at this page? Hopefully some XDA developer over here owns the device and we can get things started
overall the device has received 3 firmware upgrades so far and the community is hopeful for gingerbread to be released for this. We do have the kernel source codes for this product but do not have any developers to help us out with getting gingerbread out yet for this.

also replace statedroid with "slatedroid"

I also don't purchase this tablet, but i purchase flytouch 3 from a china site,called mcbub.com,i find they have the A9 NEC renesas tablet, here is some review in their site:
http://www.mcbub.com/customer-revie...GB-Bluetooth-HDMI-MID-black-CN101769--136318/
hope this can help you.
nullandvoid said:
Hi guys!
Since I didn't find any review to the "A9 NEC RENESAS EMMA V2 Dual Core Android 2.2 Tablet" offered in the (german) cect-shop, I was wondering whether someone already bought and tried it. Specs are quite nice, IMHO and videos on youtube look promising. Can someone share his experience with that tablet?
Thanks in advance.
Click to expand...
Click to collapse

There are a lot of discussions on A9 NEC RENESAS EMMA V2 Dual Core Android 2.2 Tablet at tabletrepublic forum too http://tabletrepublic.com/forum/cortex-a9-renesas-ev2/

full root for Rena 3
Greetings, comrades!
All the usual, lazy engine of progress. Tired of doing manually as rooting and rebuild the firmware for Rena, i am wrote a script that works like a flash, but flash itself is not working, just do it root! =)
Thus, the universal root for any firmware Rena 3:
Install:
Unzip all the files and qroot directory to root SD card.
Turn off the device.
Turn on, hold VOL+ POWER.
Wait until the message "Well done. Root complete."
Reboot device, enjoy.
The necessary files and directories:
install.sh
uImage4
ff4
cramfs4
sdboot.bin
uboot-sd.bin
and directory /qroot
NOTE!
The update does not repartition and reformat the partitions do not.
Is provided as is, no guarantees and responsibility.
Everything you do, you do at your own risk.
for download - depositfiles.com/files/gdx84ktmo

Proscan PLT 7035B - connect to PC, upgrade to JB and rooting with Play Store

Details of how to connect to PC, upgrade to JB and rooting with Play Store in posts #3 and #4.
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Model #: PLT7035-B
Processor: Rockchip 2906
1.2 GHz processor
7" capacitative touch screen
ICS 4.0.4
4GB flash memory (expandable up to 32 GB with micro SD card)
512 MB ddr3 RAM
Front facing camera
800 x 480 resolution
Wifi 802.11 B/G/N
Pre-loaded GetJar app
Kernel version
3.0.8+
[email protected] #260
Build number
rockchip
rk29sdk-eng 4.0.4_20121114
Click to expand...
Click to collapse
In the next couple of posts, will try my best to explain in detail the steps that I took to upgrade my tablet from ICS 4.0.4 to JB 4.1.1 and successfully root as well as have CWM installed along with Google Play store.
Cheers

Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/4657640-post1.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the remaining steps in this thread at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.

Jelly Bean 4.1.1 Update:
Proscan Model Number PLT7035-B has it on their official site:
http://proscanvideo.com/item.asp?itemnmbr=PLT7035-B
Firmware:
-------------
4.0
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.0.ZIP
4.1
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.1.ZIP
Manual
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_ENFR.PDF
As always - statutory warning - neither me nor the forum are liable for any damages to your tablet - do it at your own risk - no one other than you alone is liable for any damages arising from the usage of this guide.
How to upgrade the firmware after downloading it from above link:
Get the RKBatchTool
First of all - ensure that your tablet is FULLY charged.
Unzip the RKBatchTool v1.5 to your desktop
Turn off the tablet and disconnect from the PC.
Now press the Volume Up (+) button and keep holding it down.
Here comes the slightly tricky maneuver - you have to keep pressing the volume UP (+) button and connect at the USB at same time in to the PC. The tablet will power up on it's own but the screen will remain blank
Once the PC starts searching for the driver, you can release the volume button.
Windows will prompt you for drivers for "RK29 device".
Use appropriate drivers from the driver folder.
Have attached some pictures collected from the web (it is just to give a visual idea as an aid to the walk through and may not be detailed nor accurate in every aspect since some of them are from instructions for other devices).
Run the RKBatchTool v1.5.
Click on first button at the left bottom end of the tool screen - this is a toggle for Chinese/English versions.
In the "FW Path" load the update.img file by clicking on the top right side button with the three ... dots
The following will appear in the status box after the "connected devices" box turns green.
Loading firmware...
Loading firmware Finished.
I clicked "Upgrade" (even though the picture says restore).
Your previously green colored box of "connected devices" will now keep flashing in yellow.
Sit back and have fun watching the status box - will probably take a couple of minutes for the whole process and verification.
When it is all done with - the tablet will reboot.
Remember that the first boot would take a longer time than usual powering up time - so just be patient.
All the best.
Image credits : Dave S:
Attached below are the pics from Proscan site Powerpoint.

I have successfully rooted it twice and installed Play Store (once with ICS and now with JB)
First time it was with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Now I tried the [RK29][TOOL] Root RK29 Tab Toolkit since the sdk was already installed.
Very simple and super effective rooting process.:good:
The first time when I ran in to driver installation issues it was pertaining to permissions.
Found work-arounds elsewhere and also had issues with the installing google playstore.
Hence used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installing CWM was also a breeze - thanks to the great work of fun_ . It is a simple process if you follow his guidelines :good:
He has been very kind to upload an exclusive CWM-based Recovery image for ProScan PLT7035-B (ext4)
Click above link to d/l it and follow installation instructions
--------------------------------------
Precautionary measure - the following is just in case something goes wrong and you want to revert back (and also to have a copy of original images) :
I used the romdump technique and following Oma's suggestion have created the kernel, boot, recovery and system images in SD card for ICS 4.0.4 of Proscan PLT7035-B
http://www.4shared.com/zip/UtCs-yCE/Proscan_PLT7035-B.html
Above link upload to 4share is exclusively for the Proscan PLT7035-B (ICS 4.0.4) and hopefully has not been corrupted because my internet connection has been flubbing for past few days.
Have fun and remember to use caution because you alone are responsible if you brick your device.
Cheers

yes ok
vulcanize said:
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/sony-erics...om-kernel-cwm-firmware-flashing-adb-root.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the steps at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.
-----------------------------
I have successfully rooted it and installed Play Store with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Ran in to driver installation issues and found work-arounds elsewhere and also with the google playstore from above link.
Used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installed CWM using steps from thread [CWM] CWM-based Recovery for RK3066/RK2918 devices with the help of fun_
----
I would love to have a suitable kernel on this Rockchip based model to flash Oma's JB.
Any ideas/suggestions????
Thanks in advance.
Cheers
Click to expand...
Click to collapse

Rooted stock Jelly Bean 4.1.1 with Play store screen shot from the Proscan PLT7035-B with RK2906
Details of how-to in the third and fourth post from top.

A BIG THANK YOU TO Oma7144 :good:
RK2906 Tab Proscan PLT7035-B now joins his list and rocks with Jelly Bean Custom Rom! Click here if you want to try it out.
Am loving it.
Thanks to him the Kernel for the PLT7035-B can be found here
Or click here for direct download.
Looking foward to the stable CM10 version.
Cheers.

This is an update from my end with regards to the JB 4.2.2 Multi-Window by Oma on the RK29
http://crewrktablets.arctablet.com/?p=1661
Check it out
------------------------------
There is also a Second Test Build CM10.1 (Thanks Oma) on Proscan PLT7035-B
Tried the CrewRKTablets_RK29_Loox_CM10.1_4.2.1_20130113.7z along with CrewRKTablets_Format NAND.zip with the custom kernel made by him on his ICS thread.
Am very happy to say it is working great so far except for the spotty wi-fi at times and also screen rotation (needs sensor/rotation calibration).
Please remember that it is still a test build.
Cheers.

pondering
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.

crhm said:
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.
Click to expand...
Click to collapse
NO!!!!
It is meant for the 7035-B. Someone else flashed the wrong ROM and the message is quote below.
capfl2k5 said:
Proscan/Curtis PLT7035-PL
Sooo I had a moment of derrrr and flashed the jellybean upgrade for the PLT7035-B to my 7035-pl. Boots up (quickly I might add) and goes to the lock screen but I have no touch control over the screen. Does anyone have an image of the original firmware for this tablet? Or any Idea on how I can regain control of the touch screen?
Source: http://androidforums.com/general-tablet-talk/682172-proscan-curtis-plt7035-pl.html
Click to expand...
Click to collapse
But you can do all the rooting and install CWM along with playstore as mentioned in post 4 since fun_ has a generic CWM on his site.
http://forum.xda-developers.com/showpost.php?p=37221496&postcount=4
Would also appreciate it if you could kindly do a romdump of your 7035-PL and host the Boot, Recovery And System Partition Images to help people like capfl2k5 whose post from another forum is quote above.
Also try requesting Oma for a suitable kernel in his JB custom rom thread http://forum.xda-developers.com/showthread.php?t=1903745 and you will be all set. I really like that rom he has built.:good:
And then you could also try the CM 10.1 with that same kernel

I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2

crhm said:
I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
As mentioned in post # 4 in previous page
Download the Play store apk
How to install:
Rename it to Vending.apk
Paste it in system/app
Change permissions to rw-r--r--
Reboot if needed
http://forum.xda-developers.com/showpost.php?p=32731467&postcount=1
Courtesy: Kakashi Hatake

I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
Great.
Hope you followed Oma's advice for the romdump images.
http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
As for CWM - it is very simple and straightforward thanks to the great work by fun_
http://forum.xda-developers.com/showthread.php?t=2102679
Clicking the link at the top of his post will take you to his site where there is a nice walkthrough.
Now the proscan PLT7035-B that I have currently is running on the custom rom - Oma Odys Loox JB 4.1.1 V1.2.3a and I might have just enough time with the tablet to make it to 4.2.2 version.
Cheers

Have been using Orange Backup (by snoopy33) on the proscan and loving it.:good:
Playstore:
https://play.google.com/store/apps/details?id=com.pommedeterresautee.twoborange3
xda:
http://forum.xda-developers.com/showthread.php?t=2040507
Suits the need of lazy folks like me

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
crhm said:
I put the plt 7035-pl files on mediafire. I hope it helps. Iam trying to build a recovery file for cwm. I hope to make a little progres there soon.
I will try and help when I can. I just have to quit thinking webos and maybe it will go faster.:good:
Recovery.img
http://www.mediafire.com/view/?5v04gu0c2ow8cx1
Kernel.img
http://www.mediafire.com/view/?6ztdrpr217h1dos
Boot .img
http://www.mediafire.com/view/?tt9fdttjxankm1i
Click to expand...
Click to collapse
Cheers.

Ubuntu Installer for Android
Was wondering if this cheap dual core tab could handle Ubuntu and used the app from following link to install an older version of Ubuntu
http://www.mediafire.com/?5ru3tzddteciahd
Process is very simple and the app gives a detailed walk through. Am in the process of upgrading the versions now
Kudos and all credits to the original devs because I saw it on a site that did not name them.
For newer version of the install app visit the linux on android website:
http://linuxonandroid.org/downloads/
Cheers.

vulcanize said:
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
Cheers.
Click to expand...
Click to collapse
Just a mirror created for the PLT7035-PL kernel, boot and recovery images (originally posted by crhm)
https://www.dropbox.com/sh/hxky38cnck1m0oq/GXvk4Onc9F

JB 4.2.2 on the Proscan PLT7035-B
Unofficial AOSP 4.2.2 on rk29board ! thanks to Oma
http://forum.xda-developers.com/showthread.php?t=2162760
:good:

As soon as I get my recovery fixed I was thinking of using a copy of recovery and port it to mine fix it where it could be flashed with rktool if need be
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2

[Completed] [Q] Asus T100 TAF and Wifi

Hello,
I need your help guys.
I installed ubuntu on my Asus T100 TAF using the magic stick http://forum.xda-developers.com/win...opment/live-asus-t100-ta-magic-stick-t3091481
Grub and all the booting stuff is ok however.
Wifi is not Working !!!
After looking through this google+ community https://plus.google.com/communities/117853703024346186936
Kernel 4.1 was posted through the community and I installed it hoping my Wifi would work. Nothing. Not working
After, I saw that someone with the same computer than mine posted a Kernel version that would make wifi work.
Here's the link to the github: https://github.com/pinkflozd/T100TAF_kernel/
The thing is that I have absolutely no clue how to install this. It's an uncompiled kernel.​Could you please assist me on the subject ?!
More info:
Before arriving to that point, I tried installing brcmfmac43241b4-sdio.txt and brcmfmac43241b4-sdio.bin according to https://linuxnorth.wordpress.com/2014/08/28/establishing-wi-fi-connectivity-on-the-t100/
But, no sign of wifi connection
According to someone on the google+ community, the right driver for my computer is brcmfmac43340.bin, but I have no clue on how to find the .txt(nvram file)
Also, sound is not working but the previously posted uncompiled kernel apparently fixes all the previously mentioned problems.
Heres the actual Google+ Posting of the kernel version for my asus t100taf, its the second post.https://plus.google.com/112460475763080321634/posts​
All help would be appreciated. thank you very much !!

Hi there,
You already founded the right place for this question, so please ask there for assist:
[LIVE][USB][T100] Asus T100-TA Magic Stick
Read first this thread: Windows 8 FAQ:-Want to ask a question?Check here first!
Good luck

[Completed] Acer Liquid Z630 root (Linux)

Hi everyone! Looked at the threads about rooting the Acer Liquid Z630, but couldn't find any of these discussing exactly what I need.
I'll provide as much information as possible, but please let me know if I missed something.
- I'm running Android 5.1 on this device,updates seem to have stopped there.
- On the bootloader the terminal continuously says waiting for device, like not recognizing it. The phone has very little information on it (2 lines actually not saying anything useful imo).
- Found a link about the bootloader part using Windows on following page (due to being new I can't post the link in a BB tag yet, I'll be working on that later, promise!).
unlock-bootloader.net/how-to/unlock-bootloader-acer-liquid-z630/
- On my laptop I'm running Arch Linux, which I will be using for the root process.
- Trying to unlock the bootloader - rooting the device - upgrade to Android M.
Thanks in advance for your help!

Akeno Himejima said:
Hi everyone! Looked at the threads about rooting the Acer Liquid Z630, but couldn't find any of these discussing exactly what I need.
I'll provide as much information as possible, but please let me know if I missed something.
- I'm running Android 5.1 on this device,updates seem to have stopped there.
- On the bootloader the terminal continuously says waiting for device, like not recognizing it. The phone has very little information on it (2 lines actually not saying anything useful imo).
- Found a link about the bootloader part using Windows on following page (due to being new I can't post the link in a BB tag yet, I'll be working on that later, promise!).
unlock-bootloader.net/how-to/unlock-bootloader-acer-liquid-z630/
- On my laptop I'm running Arch Linux, which I will be using for the root process.
- Trying to unlock the bootloader - rooting the device - upgrade to Android M.
Thanks in advance for your help!
Click to expand...
Click to collapse
Hello,
You may visit here Root Acer liquid Z630 and read the entire thread carefully.
-Vatsal

@Vatsal Thanks for your attention! I did read the thread you mentioned before, but it doesn't seem to mention anything about the bootloader loop. As I'm stuck with that particular piece in the puzzle, do you have any manual specifically aiming for that part?
Sent from my T03 using xda-developers.com, powered by appyet.com

Akeno Himejima said:
@Vatsal Thanks for your attention! I did read the thread you mentioned before, but it doesn't seem to mention anything about the bootloader loop. As I'm stuck with that particular piece in the puzzle, do you have any manual specifically aiming for that part?
Sent from my T03 using xda-developers.com, powered by appyet.com
Click to expand...
Click to collapse
Hello,
You may try posting in the thread I linked above, the experts there maybe able to assist you.
Good luck!
-Vatsal