Shut down resets the device - General Questions and Answers

Whenever I shutdown my Thomson MID1002 Tab it restarts and resets the device. It is not manual reset, its automatic. It never shuts down. Pls help me.

tvrhossain said:
Whenever I shutdown my Thomson MID1002 Tab it restarts and resets the device. It is not manual reset, its automatic. It never shuts down. Pls help me.
Click to expand...
Click to collapse
You rooted the tablet?
Try to flash the stock rom with this tutorial here
Dowload the flash files here
I hope that I help you.
Regards

ovejasrepublicanas said:
You rooted the tablet?
Try to flash the stock rom with this tutorial here
Dowload the flash files here
I hope that I help you.
Regards
Click to expand...
Click to collapse
Thnk u bro, I successfully re-flashed the StockROM twice before for OTHER PURPOSES, but this time re-flashing didnt make it right. Its all the same after the reflash. The internal storage also shows 0.00B, hence no app can be installed. I m freaking out...

Related

Weird Softbrick/Bootlooping!

Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Have you tried flashing another kernel or reflashing your current one?
Since the kernel handles boot and recovery while download mode is on a lower level.
myozeus said:
Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Click to expand...
Click to collapse
Try to find something called "zero fill tar" I think Hillbeast made? its like a deep cleanser, if it is a firmware issue, this should help. flash it then flash any rom over it.
Try flashing this tar file. It's saved my phone many times and here is the file that ava.tar is talking about. For the second file, you have to extract it and you get a .tar file that you flash through odin. :good:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Try flashing a rom with 'force upload mode' [vol up+home and power up]
Sent from my GT-I5800 using xda premium
myozeus said:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Click to expand...
Click to collapse
Try flashing the tar after flashing the rom, ie. flash it last
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
myozeus said:
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
Click to expand...
Click to collapse
Some more suggestions, which are not very likely (not in order of probability of success but in order of quickness), but it doesnt hurt to try
1. Try booting/ entering recivery while charging
2. Try removing sd card (and then sim card as well) then booting
3. Try flashing a stock rom (then try doing a factory reset from stock recovery)
4. If you know somebody with the same phone try using their battery and then booting.
(5. When you lose all hope try the russian/old school methdod, ie. beat it into complying to your wishes )
boot loop causes and hw to work around
hey
boot loops are a cause of ur kernal not working properly.....,try downloading a working kernal through odin........even i had boot loop problems with g3mod kernal.......but the ultra oc kernal 1260hr kernal works fine fr me........also try clearing the dalvik cache or cache partition..,..which usually solves stability problems nd its a must after flashing a kernal.......try flashing marcellusbe 7.2 rom.....which is very much stable u can also find a bunch of kêrnals try nt using the g3 mod kernal.... if all these dosent work take ur mob to the service center they wont flash it as u rooted ur mob bt they will suggest u to get new motherboard get it done and then u can start frm the beginning .......
HIT THE THANKS BUTTON IF HELPED DONT JUST SAU THANX

[Q] Bricked lg optimus one

Hi guys,
yesterday I put evoking (android 4.2.1) on my phone, and I wanted to change it, so I've installed ROM Manager..
After that, I've rebooted on recovery, but, the phone shows only the lg's icon..
So I tried to unbrick this whit KDZ (using this guide http://forum.xda-developers.com/showthread.php?t=883314) and, I tried all the possibility, but it still not working. Now, it does not turn on!! Can you help me please?
P.S. Sorry for the english I'm using google translate..
remove battery, plug the phone to computer while pressing vol up and power to see if computer recognize it, if it does, flash again via kdz
after reflash, restart and w8 for the phone to boot, it will take some minutes to boot, just be patient
grigtm said:
remove battery, plug the phone to computer while pressing vol up and power to see if computer recognize it, if it does, flash again via kdz
after reflash, restart and w8 for the phone to boot, it will take some minutes to boot, just be patient
Click to expand...
Click to collapse
And if the computer don't recognize it?
that will not be good, maybe hardbrick
grigtm said:
that will not be good, maybe hardbrick
Click to expand...
Click to collapse
and there isn't any solution?
sao_95 said:
Hi guys,
yesterday I put evoking (android 4.2.1) on my phone, and I wanted to change it, so I've installed ROM Manager..
After that, I've rebooted on recovery, but, the phone shows only the lg's icon..
So I tried to unbrick this whit KDZ (using this guide http://forum.xda-developers.com/showthread.php?t=883314) and, I tried all the possibility, but it still not working. Now, it does not turn on!! Can you help me please?
P.S. Sorry for the english I'm using google translate..
Click to expand...
Click to collapse
Hey bud,
its simeple.
even i faced the same issue once. Just reboot the mobile and while booting go to the recovery mode (home+vol up + powerbutton). tere u can reinstall the rom. try ICy/PAC MAN. it works beautifully. remember to keep this rom zip file in SD card while rebooting.
skanth said:
Hey bud,
its simeple.
even i faced the same issue once. Just reboot the mobile and while booting go to the recovery mode (home+vol up + powerbutton). tere u can reinstall the rom. try ICy/PAC MAN. it works beautifully. remember to keep this rom zip file in SD card while rebooting.
Click to expand...
Click to collapse
I know, but my phone don't turn on!!
sao_95 said:
I know, but my phone don't turn on!!
Click to expand...
Click to collapse
OMG, u should ve done this step before KDZ's steps. things were simpler. Its time to take to the store i guess.
arlways areenadd
skanth said:
OMG, u should ve done this step before KDZ's steps. things were simpler. Its time to take to the store i guess.
Click to expand...
Click to collapse
I ve done this step..
sao_95 said:
I ve done this step..
Click to expand...
Click to collapse
If you removed the battery after unsuccessful kdz flash, then your phone is hard bricked and you need to go to LG
Sent from my LG-P500 using Tapatalk 2

Galaxy Tab 2 10.1 P5100 problem, bootloop no recovery

hello to all,
I need your help, I have a galaxy tab P5100 completely original, with stock andorid 4.0.3, yesterday after turning it off, the power back up and goes into bootloop, the screen appears only 2 SAMSUNG GALAXY TAB 10.1 and restarts.
goes into download mode but does not go into recovery mode.
if I put it in recovery mode appears a few seconds the green robot and then restarts.
I attach it to the power supply and I do recharge to 100%, but nothing.
I put it in download mode and flash the stock firmware but nothing.
if I put it in recovery mode, the green robot takes a few seconds longer with a blue bar below and then restarts.
What do you think can this be? or what can I try?
look forward to your advice!
thank you very much!
Pero155 said:
hello to all,
I need your help, I have a galaxy tab P5100 completely original, with stock andorid 4.0.3, yesterday after turning it off, the power back up and goes into bootloop, the screen appears only 2 SAMSUNG GALAXY TAB 10.1 and restarts.
goes into download mode but does not go into recovery mode.
if I put it in recovery mode appears a few seconds the green robot and then restarts.
I attach it to the power supply and I do recharge to 100%, but nothing.
I put it in download mode and flash the stock firmware but nothing.
if I put it in recovery mode, the green robot takes a few seconds longer with a blue bar below and then restarts.
What do you think can this be? or what can I try?
look forward to your advice!
thank you very much!
Click to expand...
Click to collapse
As you are able to boot into download mode so first flash a custom recovery like cwm and then.wipe cache partition ,factory reset and dalvik cache and then try flashing stock rom i think this will work
aditya rathee said:
As you are able to boot into download mode so first flash a custom recovery like cwm and then.wipe cache partition ,factory reset and dalvik cache and then try flashing stock rom i think this will work
Click to expand...
Click to collapse
Hello! thanks for the reply!
a curiosity, do you think it is not a hardware problem?
I had thought of this option, but as a last option, because if I put the custom recovery and keeps rebooting lose the warranty right? and I can not restore it right?
try, and I will keep you informed! I hope to solve!
thank you!
Pero155 said:
Hello! thanks for the reply!
a curiosity, do you think it is not a hardware problem?
I had thought of this option, but as a last option, because if I put the custom recovery and keeps rebooting lose the warranty right? and I can not restore it right?
try, and I will keep you informed! I hope to solve!
thank you!
Click to expand...
Click to collapse
I dont think that there is a hardware problem
aditya rathee said:
I dont think that there is a hardware problem
Click to expand...
Click to collapse
are not so confident, because having already flashed the stock fw also the recovery would have to return to work ...
tonight i'll try anyway!
but the recovery which partition is it? different from download mode? and from the system?
Pero155 said:
are not so confident, because having already flashed the stock fw also the recovery would have to return to work ...
tonight i'll try anyway!
but the recovery which partition is it? different from download mode? and from the system?
Click to expand...
Click to collapse
nothing....i have flash the recovery PHILZS but nothing...start only the download mode...the recovery restart.....
another idea?
Pero155 said:
nothing....i have flash the recovery PHILZS but nothing...start only the download mode...the recovery restart.....
another idea?
Click to expand...
Click to collapse
I think now you should go for customer care service
aditya rathee said:
I think now you should go for customer care service
Click to expand...
Click to collapse
I also think! I'll find out if it is repairable
Yesterday I tried to flash the pit file, but nothing.
I think I've tried everything now, thanks anyway for the advice!
Pero155 said:
I also think! I'll find out if it is repairable
Yesterday I tried to flash the pit file, but nothing.
I think I've tried everything now, thanks anyway for the advice!
Click to expand...
Click to collapse
Yeah i can understand
but instead of thanking in a post you can also hit thanks if you like
good luck
i hope your tab gets functional again
What did you do with your device finally?
I have exactly same problem as you. Is there a way to get it to work?
Thanks
no recovery
ehsanx said:
What did you do with your device finally?
I have exactly same problem as you. Is there a way to get it to work?
Thanks
Click to expand...
Click to collapse
same here. how to install back the recovery? pls help thanks

GT-P5113 Bricked After Firmware Update?

I apologize if the easy and simple fix to this issue has already been posted, but so far, I've read so many different "solutions"...none of wwhich has worked.
Yesterday, I accepted an OTA update, after which my tablet never booted up again. It will partially boot up, but will get "stuck" on the glowing Samsung logo. It will not proceed any further, and will just sit there on the logo until the battery wears out.
I've been able to get it to the menu to wipe data, etc (holding down the power button and volume up), which I DID, only to have the tablet reboot to the glowing logo and sit there yet again.
I don't know what to do. It doesn't sound like Samsung has a fix for this software problem? Or is there really something wrong with my tablet that I'd have to send it in? Sounds like others who have done this have received their tablets back, "fixed", only to have the same thing happen again when they did the OTA update, OR if they did the update through Kies.
I'm a newbie. I'm not a techie. If there IS a fix for this, can you give me STEP-BY-STEP instructions on what to do? AS if you are talking to a child? haha...thank you so much! I'm SO upset...my tablet was beautiful, and now it's just dead...
DetroitJulie said:
I apologize if the easy and simple fix to this issue has already been posted, but so far, I've read so many different "solutions"...none of wwhich has worked.
Yesterday, I accepted an OTA update, after which my tablet never booted up again. It will partially boot up, but will get "stuck" on the glowing Samsung logo. It will not proceed any further, and will just sit there on the logo until the battery wears out.
I've been able to get it to the menu to wipe data, etc (holding down the power button and volume up), which I DID, only to have the tablet reboot to the glowing logo and sit there yet again.
I don't know what to do. It doesn't sound like Samsung has a fix for this software problem? Or is there really something wrong with my tablet that I'd have to send it in? Sounds like others who have done this have received their tablets back, "fixed", only to have the same thing happen again when they did the OTA update, OR if they did the update through Kies.
I'm a newbie. I'm not a techie. If there IS a fix for this, can you give me STEP-BY-STEP instructions on what to do? AS if you are talking to a child? haha...thank you so much! I'm SO upset...my tablet was beautiful, and now it's just dead...
Click to expand...
Click to collapse
this happens buddy
you don't just have to wipe ache
do like this
1 reboot into recovery
2 do factory reset
3 wipe cache partition
nothing else
4 have fun after that
good luck
aditya rathee said:
this happens buddy
you don't just have to wipe ache
do like this
1 reboot into recovery
2 do factory reset
3 wipe cache partition
nothing else
4 have fun after that
good luck
Click to expand...
Click to collapse
And exactly HOW do I "reboot into recovery"? Everytime I push power plus the volume up button, I get to a warning screen that says something about "warning, you are about to change the OS...continue or cancel" I cant get past this to even GET to the menu of "reboot", "wipe data", etc.
HELP!
(Thanks for responding!)
DetroitJulie said:
And exactly HOW do I "reboot into recovery"? Everytime I push power plus the volume up button, I get to a warning screen that says something about "warning, you are about to change the OS...continue or cancel" I cant get past this to even GET to the menu of "reboot", "wipe data", etc.
HELP!
(Thanks for responding!)
Click to expand...
Click to collapse
it will give that warning message but don't worry just continue and follow my steps buddy
aditya rathee said:
this happens buddy
you don't just have to wipe ache
do like this
1 reboot into recovery
2 do factory reset
3 wipe cache partition
nothing else
4 have fun after that
good luck
Click to expand...
Click to collapse
Alright...I did get it into recovery mode, I factory reset it, then hit wipe cache partition. It started the process, THEN I saw "ERROR" flash quickly up on the screen. Then it began to boot up again, and here I am, STUCK ON THE GLOWING LOGO AGAIN.
This didnt work. Anybody else have a different suggestion?
DetroitJulie said:
Alright...I did get it into recovery mode, I factory reset it, then hit wipe cache partition. It started the process, THEN I saw "ERROR" flash quickly up on the screen. Then it began to boot up again, and here I am, STUCK ON THE GLOWING LOGO AGAIN.
This didnt work. Anybody else have a different suggestion?
Click to expand...
Click to collapse
again flash the rom with odin and then follow these steps
if not then please try to flash again with re partition unchecked
aditya rathee said:
again flash the rom with odin and then follow these steps
if not then please try to flash again with re partition unchecked
Click to expand...
Click to collapse
Alright. I have Odin. Could you please run down the steps on how to "flash the ROM"?
Thanks...sorry, I need my hand held!
~Julie
DetroitJulie said:
Alright. I have Odin. Could you please run down the steps on how to "flash the ROM"?
Thanks...sorry, I need my hand held!
~Julie
Click to expand...
Click to collapse
1 reboot in download mode
2 in odin uncheck repartition
3 click start
4 after it pass
please boot into recovery and do factory reset and wipe cache partition
aditya rathee said:
1 reboot in download mode
2 in odin uncheck repartition
3 click start
4 after it pass
please boot into recovery and do factory reset and wipe cache partition
Click to expand...
Click to collapse
Odin says "No binary selected"????
Please, I have NO idea what this is, or what the heck I'm doing.
Alright, so the file I think I need is P5113UECLK7. Anybody have any ideas where I can download this? ALL LINKS I FIND are to site that have been shutdown, and it is NOT on the Sammobile site, either.
DetroitJulie said:
Alright, so the file I think I need is P5113UECLK7. Anybody have any ideas where I can download this? ALL LINKS I FIND are to site that have been shutdown, and it is NOT on the Sammobile site, either.
Click to expand...
Click to collapse
Hey there DetroitJulie....I have it, but for some reason I cant get the thing uploaded onto the site. Its becoming very irritating to say the least. If you want to pm me your email address i'll try and sent it that way. Ive got the .zip for recovery and the .tar file for odin.
DetroitJulie said:
Alright, so the file I think I need is P5113UECLK7. Anybody have any ideas where I can download this? ALL LINKS I FIND are to site that have been shutdown, and it is NOT on the Sammobile site, either.
Click to expand...
Click to collapse
have you tried it on samsung-updates.com there are uploaded.net links also there so it might work
No Links....No Download
aditya rathee said:
have you tried it on samsung-updates.com there are uploaded.net links also there so it might work
Click to expand...
Click to collapse
Samsung-updates.com leads me to porn sites when I click on the download link. When a page DID load that said I could download the file, I clicked on the links, and the same page loaded again. This file is NOWHERE.
Please, someone send it to me, please!!!
~Julie
DetroitJulie said:
Samsung-updates.com leads me to porn sites when I click on the download link. When a page DID load that said I could download the file, I clicked on the links, and the same page loaded again. This file is NOWHERE.
Please, someone send it to me, please!!!
~Julie
Click to expand...
Click to collapse
then i guess you have to wait for hotfile links to be updated
that is the only way or if some friend of you having same tab and have account on dropbox googledoc or mediafire and have the file can help you
CSP III said:
Hey there DetroitJulie....I have it, but for some reason I cant get the thing uploaded onto the site. Its becoming very irritating to say the least. If you want to pm me your email address i'll try and sent it that way. Ive got the .zip for recovery and the .tar file for odin.
Click to expand...
Click to collapse
Many thanks to you, Chuck! I flashed it back to 4.1.1, then did the firmware update again, and it worked! My tablet is updated perfectly to 4.2.2.
Thank you so much for all your help!
julie
DetroitJulie said:
Many thanks to you, Chuck! I flashed it back to 4.1.1, then did the firmware update again, and it worked! My tablet is updated perfectly to 4.2.2.
Thank you so much for all your help!
julie
Click to expand...
Click to collapse
All good Julie. So glad to be able to give back. Save that file, just in case!
CSP III said:
Hey there DetroitJulie....I have it, but for some reason I cant get the thing uploaded onto the site. Its becoming very irritating to say the least. If you want to pm me your email address i'll try and sent it that way. Ive got the .zip for recovery and the .tar file for odin.
Click to expand...
Click to collapse
Many thanks to you, Chuck! I flashed it back to 4.1.1, then did the firmware update again, and it worked! My tablet is updated perfectly to 4.2.2.
Thank you so much for all your help!
julie
help!
DetroitJulie said:
Many thanks to you, Chuck! I flashed it back to 4.1.1, then did the firmware update again, and it worked! My tablet is updated perfectly to 4.2.2.
Thank you so much for all your help!
julie
Click to expand...
Click to collapse
Same thing happening with my galaxy tab 2. please please send me the file
I had this same problem, but I'm back up and running thanks to CSP III. Thanks!
gnmgnm87 said:
I had this same problem, but I'm back up and running thanks to CSP III. Thanks!
Click to expand...
Click to collapse
great news....glad to be a help.

[Q] help me! please help! soft bricked my lenovo a800

Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
prajwal999 said:
Hi everyone, i am new to xda. Ive soft bricked my lenovo a800 by manually installing fonts and after reboot, soft bricked my phone. I have stock recovery with usb debugging disabled accidently. My pc is detecting my phone but cannot access it. Ive wanted to flash it to stock rom and flash tool is not detecting it. Does anyone has any solution to my worst problem ? please help cause i dont want to give away 500 to 700 bucks for a service center. Help me
Click to expand...
Click to collapse
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
yes
thenookieforlife3 said:
Are you able to use the power button to "kind of" reboot? (like, it doesn't actually start up, but it still responds to the power button)
Click to expand...
Click to collapse
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
prajwal999 said:
Thanks for replying. It boots and get stuck at lenovo loading screen. I dont even have nandroid backup.
Click to expand...
Click to collapse
So it does respond to the power button, even if it doesn't actually boot up?
thenookieforlife3 said:
So it does respond to the power button, even if it doesn't actually boot up?
Click to expand...
Click to collapse
Yes it is soft bricked
but
prajwal999 said:
Yes it is soft bricked
Click to expand...
Click to collapse
I still can go to stock recovery and yet makes no sense
prajwal999 said:
I still can go to stock recovery and yet makes no sense
Click to expand...
Click to collapse
Why does it make no sense? I was going to recommend using ClockworkMod, but...
thenookieforlife3 said:
Why does it make no sense? I was going to recommend using ClockworkMod, but...
Click to expand...
Click to collapse
I could have done it with cmw but i have stock recovery and it is of no use...
prajwal999 said:
I could have done it with cmw but i have stock recovery and it is of no use...
Click to expand...
Click to collapse
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
thenookieforlife3 said:
I need you to please speak with a little more enunciation. I am not really understanding what you are trying to say.
What have you done so far, and what has not been successful?
Click to expand...
Click to collapse
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
prajwal999 said:
What ? Let me put this way. My phone has stock recovery, usb debugging disabled, boot looping, windows cant read my android and i dont have nandroid backup and i have stock rom...
Click to expand...
Click to collapse
Yo! Whats your age ? And which grade or class are you studying in ?
prajwal999 said:
Yo! Whats your age ? And which grade or class are you studying in ?
Click to expand...
Click to collapse
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
tried that!
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
I've tried that several times. But there is a problem in my rom. Any ideas?
thenookieforlife3 said:
Are you talking to me?
You replied to your own post, so...
P.S. I am not at liberty to share that information. Why do you need it?
The instructions to factory-reset your a800:
1. Press together : POWER + VOLUME UP about several second, a warning will appear onscreen.
2. Choose "Reset Device".
3. Reboot.
You should be back to stock and your problem fixed.
Click to expand...
Click to collapse
Any ideas? I want my phone back. Please!!
help me!!
Does anyone have fix for my phone
guys please help my my Lenovo A800 after 10 seconds it wel close again stock at Lenovo logo ,I can't even use factory mode,after 10 seconds it will close to,no choose directory,no choose clearing data or normal boot,nothing,only when I press Power and volume up,You are in factory mode press power button and the normal boot,and it will close,are this problem can be fix?

Categories

Resources