Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Have you tried flashing another kernel or reflashing your current one?
Since the kernel handles boot and recovery while download mode is on a lower level.
myozeus said:
Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Click to expand...
Click to collapse
Try to find something called "zero fill tar" I think Hillbeast made? its like a deep cleanser, if it is a firmware issue, this should help. flash it then flash any rom over it.
Try flashing this tar file. It's saved my phone many times and here is the file that ava.tar is talking about. For the second file, you have to extract it and you get a .tar file that you flash through odin. :good:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Try flashing a rom with 'force upload mode' [vol up+home and power up]
Sent from my GT-I5800 using xda premium
myozeus said:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Click to expand...
Click to collapse
Try flashing the tar after flashing the rom, ie. flash it last
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
myozeus said:
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
Click to expand...
Click to collapse
Some more suggestions, which are not very likely (not in order of probability of success but in order of quickness), but it doesnt hurt to try
1. Try booting/ entering recivery while charging
2. Try removing sd card (and then sim card as well) then booting
3. Try flashing a stock rom (then try doing a factory reset from stock recovery)
4. If you know somebody with the same phone try using their battery and then booting.
(5. When you lose all hope try the russian/old school methdod, ie. beat it into complying to your wishes )
boot loop causes and hw to work around
hey
boot loops are a cause of ur kernal not working properly.....,try downloading a working kernal through odin........even i had boot loop problems with g3mod kernal.......but the ultra oc kernal 1260hr kernal works fine fr me........also try clearing the dalvik cache or cache partition..,..which usually solves stability problems nd its a must after flashing a kernal.......try flashing marcellusbe 7.2 rom.....which is very much stable u can also find a bunch of kêrnals try nt using the g3 mod kernal.... if all these dosent work take ur mob to the service center they wont flash it as u rooted ur mob bt they will suggest u to get new motherboard get it done and then u can start frm the beginning .......
HIT THE THANKS BUTTON IF HELPED DONT JUST SAU THANX
Related
tried installing glorious overdose but I tried to wipe data, and it stayed there for about 10min so i pulled out the battery. i tried a second time but without wiping data (i didnt know WTH i was thinking) so it rebooted and was stuck at boot screen saying create new partition and system not avaliable (sumthing like that) so i decided to try odin so i can go back to stock firmware and it finished and now it stays at the bootscreen blinking i tried recovery im stuck.
before you odin, reinstall the phones drivers on your pc. connect the phone to the pc without the battery, hold the volume down button and the trackpad and reinsert the battery. when you odin, make sure only auto reboot is checked, and put the pit file in the pit slot and the tar file in the pda slot. if you use kies to update firmware, reinstall drivers again before updating.
You may need to check "Re-Partition" in Odin.
shouldnt need to repart, in fact it may be a bad idea. every time i odined and accidentally had repart checked, it screwed something up. most recently the stock messaging app didnt work after odin. i have since switched to go sms, but still made sure i had a clean firmware install. i would try odin without repartitioning first and see how that goes. if something is wrong, you can always odin again. the first time i tried to flash a rom i bricked because i flashed cwm through rom manager. the thread where i found the odin file said make sure only auto reboot is checked. besides, if the rom didnt flash correctly, then it didnt convert any partitions anyway.
ok i had the same problem for the first time i tried to install a custom rom, theres a way that you can fix it with out odin. follow this steps... i promise it will work.
1)boot into the red cwm voodoo lagfix recovery
2)wipe data/factory reset
3)wipe cache partion
4)after all the steps above are completed, go to apply sdcard:update.zip
the its going to take you to the regular cwm once there follow this steps...
1)install the custom you want to install, but make sure that it doesnt need special mounts and unmounts, so follow the instruction flash the rom and it should fix it
Heimdall worked perfectly when I bricked my phone.
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
WolfV2 said:
Heimdall worked perfectly when I bricked my phone.
Click to expand...
Click to collapse
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
flashing bootloader in that package doesn't break it.
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
My advice is do whatever it takes, and besides, don't worry about breaking something that's already broken, if you know what I mean...
johnwazhere said:
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
Click to expand...
Click to collapse
No problem, glad I could help
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
This is my current problem as well, except I have tried checking flash bootloader and have also tried Odin, but all to no avail. Can anyone help me? This is my situation:
I've had my sidekick for about a year now and have gone through the typical problems of a sidekick user. Then yesterday, my sidekick's alarm woke me as normal, but I was unable to turn it off because my touch screen wasn't working. So i battery pulled, restarted, and noticed that the screen stayed on the "T-Mobile Sidekick 4g SAMSUNG" start up screen and did not budge. I tried battery draining, more battery pulling, and nothing worked. So i did a lot of research on here and other websites and decided to use Odin. After initial problems of a newbie, I eventually figured it out and got it to RESET and PASS, but the subsequent reboot only caused my phone to be stuck in the same Sidekick start up screen it has been getting stuck in. Similarly, after many tries, Heimdall has done the same for me. Sorry if that was a long read (also, I hope its cool that i bumped this thread with my own problems), but is there anything else i can do? I'd really like to use my phone again..
I've been working for hours trying to figure out how to fix it, and I just don't know. The end result is always just the freezing at the t-mobile start up screen..Also, since i forgot to mention, I can only get into download mode with the volume down+trackball method because otherwise it would just go to the regular start up screen and freeze. I don't know if that means anything, but yeah.
Have you used heimdall yet? I bricked my SK4G the other day when flashing a rom and heimdall put it back to stock within 5 minutes of me bricking it.
Thank you for replying. Unfortunately yes, I did. With flash bootloader unchecked and checked. It says it disconnects after everything is done and it restarts, only to become frozen at the start screen again =/. I don't know if there is some silly detail that im missing that makes the flash rather than just restart, but all i can manage to make it do is restart.
Sigh. Guess im going phone shopping.
How did u get the phone in dl. Mode
Sent from my SGH-T839 using XDA
I had to plug the phone into my computer without the battery, hold volume and the track ball, then pop the battery in. Any other attempts would simply start it up/freeze it.
Ok did u have heimdall started first?
Sent from my SGH-T839 using XDA
And what rom did u last have?
Sent from my SGH-T839 using XDA
I'm not entirely sure if I had it started first, so I'll try it that way now. And the last ROM that I had? Honestly not really sure what that means =p, but i've never flashed one and I had the most recent sidekick update installed (though it is possible that I had done a factory reset at some point to fix an error).
---------- Post added at 01:04 PM ---------- Previous post was at 12:45 PM ----------
Just tried it. Without flashing bootloaders, it finishes and restarts to my frozen start up screen as normal. However, when i flash bootloaders, it gets to "uploading pit", but the upload fails and it reboots my phone. But this time, it reboots into download mode. A welcome change from my start up screen. Maybe there's hope.
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Mhz250 said:
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Click to expand...
Click to collapse
I did the same thing a few days ago. As long as you have your current rom downloaded on your computer you can put your phone in ODIN mode (power + vol down), start ODIN on computer, plug in phone. Once ODIN sees your phone click start. Since right now you can't see anything on your phone due to the kernel, redoing it will straighten you out.
I fixed mine this way and haven't messed with the kernel since.
Tappin' from my SGP 5.0
The thing is that I cant eter odin recovery mode
I have CWMR5.... I try with (vol up + power btn + central btn). And the CWMR5 is there.
Another thing is that I dont have a bootloader lower than lph
I cant install another rom
So.. I'm stuck here
any ideas??
simple!!!
well u can simply flash the rom to stock one by putting it in download mode and after that selecting the stock rom in the pda
after that u need root as well deoxidise the rom so that rom could be properly installed!!!
Maybe this will help:
http://androidflip.com/unbrick-samsung-android-phones-click-guide/
Thanks people!
I've finally placed a CM9 rom in the flash memory and installed it with google apps.
Clear cache
wipe data
clear davik(or something)
and reboot...
I've lost all my work postits but I got my phone back!
and with 4.0.4
Thanks guys!! all of you for your time answering!
I'm happy you got your phone working again!!!! I was crushed when I thought I killed mine too.
Sent from my SPH-D710 using Tapatalk 2
So, I am running MIUI, which has problems with tethering. I decided to go for the latest value pack released by samsung. As said in the thread, I repartitioned my phone, using latona.pit. Now, I was supposed to reboot and go back to download mode to install any xxkpe rom, to continue with flashing. But, my phone just show a black screen, with no info. Download mode is not working. Odin does not detect the phone either.
Any suggestions? I am trying to reflash the pit file, again to make sure, and scouring over the forums, in the meantime. Let me know, if I am missing something.
jitendragarg said:
So, I am running MIUI, which has problems with tethering. I decided to go for the latest value pack released by samsung. As said in the thread, I repartitioned my phone, using latona.pit. Now, I was supposed to reboot and go back to download mode to install any xxkpe rom, to continue with flashing. But, my phone just show a black screen, with no info. Download mode is not working. Odin does not detect the phone either.
Any suggestions? I am trying to reflash the pit file, again to make sure, and scouring over the forums, in the meantime. Let me know, if I am missing something.
Click to expand...
Click to collapse
remove battery reinsert go to download mode flash kpe>ddlf2 now stop spamming other threads :|
shriomman said:
remove battery reinsert go to download mode flash kpe>ddlf2 now stop spamming other threads :|
Click to expand...
Click to collapse
Did that. Wasn't working for a couple times, panicked, and posted here. Thought, it might have something to do with that value pack itself, so posted there too. Didn't know, two posts counted as spamming. What a way to encourage participation. Thanks a lot.
Update on issue:
Tried taking out battery and reinserting everything. Multiple restarts, and somehow got odin to detect it. Still no screen for download mode. Tried flashing the firmware, and is stuck in a boot loop now. What next?
jitendragarg said:
Did that. Wasn't working for a couple times, panicked, and posted here. Thought, it might have something to do with that value pack itself, so posted there too. Didn't know, two posts counted as spamming. What a way to encourage participation. Thanks a lot.
Update on issue:
Tried taking out battery and reinserting everything. Multiple restarts, and somehow got odin to detect it. Still no screen for download mode. Tried flashing the firmware, and is stuck in a boot loop now. What next?
Click to expand...
Click to collapse
Can u please explain me in detail how u enter in download mode?? awhat procedure u follow for flashing??? Tell me in detail.
vishal24387 said:
Can u please explain me in detail how u enter in download mode?? awhat procedure u follow for flashing??? Tell me in detail.
Click to expand...
Click to collapse
Volume Down + Home Key + Power to get to download mode.
I use Odin to flash. I have 3.0 version, which shows blue icon on the com port, the phone is connected to, instead of yellow from older versions. To flash pit, I used the button saying pit to select pit file. Default options, that have auto-reboot, and F. Reset Time enabled. Everything else, is disabled.
Same method for flashing firmware. Only thing, I select pda option instead of pit, while selecting the file. Odin says, pass for both times, that is flashing with pit, and flashing with actual rom.
There is no download screen, one that says "Downloading target", or something like that. Earlier, it was not even getting detected in Odin, which is solved after multiple reboot. After flashing rom, it gets stuck in boot loop.
Not sure, if I should change any option in Odin, so I haven't tried that.
I've encountered such an issue with a couple of ROMs that i tried on my other device(mi-280).
Try flashing the ROM twice then try to reboot. I did clear cache and dalvik cache between 2 flashes(not sure why). Worked for me.
Hetalk said:
I've encountered such an issue with a couple of ROMs that i tried on my other device(mi-280).
Try flashing the ROM twice then try to reboot. I did clear cache and dalvik cache between 2 flashes(not sure why). Worked for me.
Click to expand...
Click to collapse
Phone is stuck in boot loop, so can't clear any cache. Rom is stock, so there is no CWM recovery mode. Flashing twice is good idea. Will try it out and post result soon. Also, downloading another rom. This hotfile uploading is a bit of a hit-and-miss for me, as power cuts are way too frequent here. It is possible that rom might be faulty.
Edit:
Same result. Still stuck in boot loop. Flashing twice didn't worked.
Its better to flash xxkpe firmware twice & check whether phone boot properly or not. If everything goes well then flash ddlf2 stock rom.
jitendragarg said:
Phone is stuck in boot loop, so can't clear any cache. Rom is stock, so there is no CWM recovery mode. Flashing twice is good idea. Will try it out and post result soon. Also, downloading another rom. This hotfile uploading is a bit of a hit-and-miss for me, as power cuts are way too frequent here. It is possible that rom might be faulty.
Click to expand...
Click to collapse
Most devs post MD5 for a reason.
Hetalk said:
I've encountered such an issue with a couple of ROMs that i tried on my other device(mi-280).
Try flashing the ROM twice then try to reboot. I did clear cache and dalvik cache between 2 flashes(not sure why). Worked for me.
Click to expand...
Click to collapse
People how can he do anything if he cannot even enter download mode??
Dude i really think u should visit the service centre..say kies screwed up the phone while upgrading to to some firmware
N cheers.even i bricked my phone once(soft bricked) n went to panic mode posting my condition everywhere..so don't b hurt..we do love getting newbies
Swyped from my RemICS powered sl
loneagl said:
People how can he do anything if he cannot even enter download mode??
Dude i really think u should visit the service centre..say kies screwed up the phone while upgrading to to some firmware
N cheers.even i bricked my phone once(soft bricked) n went to panic mode posting my condition everywhere..so don't b hurt..we do love getting newbies
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
In subsequent post, he also said he could now get to download mode and is in a bootloop now.
Hetalk said:
In subsequent post, he also said he could now get to download mode and is in a bootloop now.
Click to expand...
Click to collapse
sorry.my bad
Swyped from my RemICS powered sl
Boot to recovery and factory reset. If any errors pop up let us know.
Sent from my GT-I9003 using xda app-developers app
vishal24387 said:
Its better to flash xxkpe firmware twice & check whether phone boot properly or not. If everything goes well then flash ddlf2 stock rom.
Click to expand...
Click to collapse
Downloading the same. Power cut for 3 hours made me stop it earlier. I had xxkpq earlier, which is not working. I thought xxkpq was also an official release, so it should have worked.
loneagl said:
People how can he do anything if he cannot even enter download mode??
Dude i really think u should visit the service centre..say kies screwed up the phone while upgrading to to some firmware
N cheers.even i bricked my phone once(soft bricked) n went to panic mode posting my condition everywhere..so don't b hurt..we do love getting newbies
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
I can enter download mode, now. That worked after couple restarts. It just does not show any screen, for download mode.
bscraze said:
Boot to recovery and factory reset. If any errors pop up let us know.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
no recovery mod. just a black screen if I try anything, instead of normal boot.
jitendragarg said:
no recovery mod. just a black screen if I try anything, instead of normal boot.
Click to expand...
Click to collapse
Ok can u try in this way...?? Flash xxkpe with pit file. Observe whether phone start normally. Still if u observe bootloop then flash amit universal kernel so that with help of it u can go into recovery mode so that u can clear all data, cache & dalvik cache.
jitendragarg said:
no recovery mod. just a black screen if I try anything, instead of normal boot.
Click to expand...
Click to collapse
You used vol up+home+power button combo
Sent from my GT-I9003 using xda app-developers app
bscraze said:
You used vol up+home+power button combo
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
?? Isn't it supposed to be vol down?
vishal24387 said:
Ok can u try in this way...?? Flash xxkpe with pit file. Observe whether phone start normally. Still if u observe bootloop then flash amit universal kernel so that with help of it u can go into recovery mode so that u can clear all data, cache & dalvik cache.
Click to expand...
Click to collapse
Doing exactly the same. Downloading from hotfile is a pita with frequent power cuts.
jitendragarg said:
?? Isn't it supposed to be vol down?
Doing exactly the same. Downloading from hotfile is a pita with frequent power cuts.
Click to expand...
Click to collapse
I'm talking about booting to recovery.
Sent from my GT-I9003 using xda app-developers app
bscraze said:
I'm talking about booting to recovery.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
He's on stock now, so got no cwm recovery.
I'm really worried about this, I've tried to install SGH-I997-UCKE3-STOCK-One-Click and Stock_SGH_I997_UCLB3_Repartition-One-Click several times, sometimes I got the factoryfs upload failed error or the dbdatafs upload failed error in a given percentage (about 60% and 78%... sometimes at 100%), all in the Heimdall .jar file, which in other Infuses I've worked with I install them several times, so believe me I've tried this a lot of times and never fails me, this is my first time with this issue and I really need someone to help me here since this Infuse is not mine and it's starting to freak me out
After two or three tries, it goes well and install the stock rom perfectly, BUT, no matter wich one I install, Froyo or Gingerbread, it always stuck in stock recovery, I tried to wipe everything and restart... and then after the Samsung logo I get the stock recovery. I've see a bootloop several times, but this it's kinda different since after the Samsung logo the phone restarts and get the Samsung logo again... but being stuck in the stock recovery, well, this is the first time I see this.
The phone still have Download Mode, but I'm telling you, it gets those upload errors I described up here. I get the phone rooted and with Gingerbread 2.3.6, but my friend wanted me to reset everything and get it to stock Froyo or Gingerbread.
Can anyone help me with this?
Please.. thanks in advance.
Have you tried odin to see if it behaves the same?
Sent from my sweet & buttery Infuse
andros11 said:
Have you tried odin to see if it behaves the same?
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have Odin v1.8 and it wont detect the phone
Heimdall does... but I have the issues explained.
Any ideas?
alainalemany said:
I'm really worried about this, I've tried to install SGH-I997-UCKE3-STOCK-One-Click and Stock_SGH_I997_UCLB3_Repartition-One-Click several times, sometimes I got the factoryfs upload failed error or the dbdatafs upload failed error in a given percentage (about 60% and 78%... sometimes at 100%), all in the Heimdall .jar file, which in other Infuses I've worked with I install them several times, so believe me I've tried this a lot of times and never fails me, this is my first time with this issue and I really need someone to help me here since this Infuse is not mine and it's starting to freak me out
Click to expand...
Click to collapse
the last part of the heimdall uclb3 op: change usb cord, usb port or pc.
clean your usb port
qkster said:
the last part of the heimdall uclb3 op: change usb cord, usb port or pc.
clean your usb port
Click to expand...
Click to collapse
Buddy thank you so much... the thing is, difficult or not, I get to install the ROM... the next is to get stuck in stock recovery.
How about that part?
Thanks again.
alainalemany said:
Buddy thank you so much... the thing is, difficult or not, I get to install the ROM... the next is to get stuck in stock recovery.
How about that part?
Thanks again.
Click to expand...
Click to collapse
after you successfully flash the stock rom, go to post #2 to flash the recovery kernel.
If you want to, before you flash recovery kernel, delete the voodoo folder in your sdcard.
The recovery kernel will convert your files system into voodoo ext4 from stock rfs
alainalemany said:
I'm really worried about this, I've tried to install SGH-I997-UCKE3-STOCK-One-Click and Stock_SGH_I997_UCLB3_Repartition-One-Click several times, sometimes I got the factoryfs upload failed error or the dbdatafs upload failed error in a given percentage (about 60% and 78%... sometimes at 100%), all in the Heimdall .jar file, which in other Infuses I've worked with I install them several times, so believe me I've tried this a lot of times and never fails me, this is my first time with this issue and I really need someone to help me here since this Infuse is not mine and it's starting to freak me out
After two or three tries, it goes well and install the stock rom perfectly, BUT, no matter wich one I install, Froyo or Gingerbread, it always stuck in stock recovery, I tried to wipe everything and restart... and then after the Samsung logo I get the stock recovery. I've see a bootloop several times, but this it's kinda different since after the Samsung logo the phone restarts and get the Samsung logo again... but being stuck in the stock recovery, well, this is the first time I see this.
The phone still have Download Mode, but I'm telling you, it gets those upload errors I described up here. I get the phone rooted and with Gingerbread 2.3.6, but my friend wanted me to reset everything and get it to stock Froyo or Gingerbread.
Can anyone help me with this?
Please.. thanks in advance.
Click to expand...
Click to collapse
HI, I've had the same situation what i did to resolve it was that after flashing the rom (STOCK gingerbread) I've checked and flashed the bootloader and the phote started up normally.
Hope this will help.
Follow qkster's directions and you should be good!
Be careful if you decide to flash the bootloaders since a bad flash of those will hardbrick the phone.
Sent from my SGH-I997 using xda app-developers app
Hi,
I recently rooted my galaxy core, then i installed clockworkmod 6.0 in rom manager i chose it was 2.0 because i didn't know what it was,
then i rebooted in clockworkmod recovery and i did a backup and then installed MONSTER$ rom and i rebooted then i saw the galaxy core i8260 thing and the exclamation mark and then the screen went crazy and it got into the recovery then i wiped it factory nothing then i wiped cache nothing then i wiped dalvik cache nothing then i advanced wiped boot nothing advanced wiped data nothing advanced wiped system nothing
so can anyone help i'm new to this.
RODEBLUR said:
Hi,
I recently rooted my galaxy core, then i installed clockworkmod 6.0 in rom manager i chose it was 2.0 because i didn't know what it was,
then i rebooted in clockworkmod recovery and i did a backup and then installed MONSTER$ rom and i rebooted then i saw the galaxy core i8260 thing and the exclamation mark and then the screen went crazy and it got into the recovery then i wiped it factory nothing then i wiped cache nothing then i wiped dalvik cache nothing then i advanced wiped boot nothing advanced wiped data nothing advanced wiped system nothing
so can anyone help i'm new to this.
Click to expand...
Click to collapse
Actually this is not a big issue.. but need a bit workout to solve this..
First thing is dont be panic and be aware of what you are doing..
What happened now is a sift brick.. It happened because of the errors caused during installing CWM and which prevent you from booting.
The solution is to flash your phone with the original stock firmware of Galaxy Core using Odin after going into download mode. Hope you are familiar with the process.. Feel free to ask if you have doubts.
Sent From GT-I9082 with RR v5.0.2
DMJoh said:
Actually this is not a big issue.. but need a bit workout to solve this..
First thing is dont be panic and be aware of what you are doing..
What happened now is a sift brick.. It happened because of the errors caused during installing CWM and which prevent you from booting.
The solution is to flash your phone with the original stock firmware of Galaxy Core using Odin after going into download mode. Hope you are familiar with the process.. Feel free to ask if you have doubts.
Sent From GT-I9082 with RR v5.0.2
Click to expand...
Click to collapse
Can you tell me where can I get cwm for this phone?
InfinityShooter said:
Can you tell me where can I get cwm for this phone?
Click to expand...
Click to collapse
I dont know why you asking me this! cuz you know what it is. Am i wrong somewhere, if so apologies!
I just tried to explain the easy way to make the phone back to life
DMJoh said:
I dont know why you asking me this! cuz you know what it is. Am i wrong somewhere, if so apologies!
I just tried to explain the easy way to make the phone back to life
Click to expand...
Click to collapse
Nothing like that bro! I genuinely asked that question because you seem to own this phone.
Anyways I found what I was looking for
Still thanks!
InfinityShooter You bought a galaxy core? This brother will now ROMs and all since you are now among us well come with us sir
Sent from my GT-I8260 using XDA Premium 4 mobile app
InfinityShooter said:
Nothing like that bro! I genuinely asked that question because you seem to own this phone.
Anyways I found what I was looking for
Still thanks!
Click to expand...
Click to collapse
You have the authority and you said it..No offense!!
DMJoh said:
Actually this is not a big issue.. but need a bit workout to solve this..
First thing is dont be panic and be aware of what you are doing..
What happened now is a sift brick.. It happened because of the errors caused during installing CWM and which prevent you from booting.
The solution is to flash your phone with the original stock firmware of Galaxy Core using Odin after going into download mode. Hope you are familiar with the process.. Feel free to ask if you have doubts.
Sent From GT-I9082 with RR v5.0.2
Click to expand...
Click to collapse
Hi,
I kinda have a similar problem. Installed cwm through adb, as the phone wont detect in odin. Then booted into recover, made backup and installed Kit-cat rom. Now the phone wont boot at all. Just comes back to recovery. I tried restoring backup, still doesnt work.
Also tried monster rom. Still the same problem.
Now i cant even flash stock, as it wont detect on odin. However other galaxy core's detect and work fine.
Is there anything i can do to restore.?
Cant even take it to samsung, as it'll boot into custom recovery and they will know i messed up the phone.
Any help is really appreciated.. thanks..
kishankpadiyar said:
Hi,
I kinda have a similar problem. Installed cwm through adb, as the phone wont detect in odin. Then booted into recover, made backup and installed Kit-cat rom. Now the phone wont boot at all. Just comes back to recovery. I tried restoring backup, still doesnt work.
Also tried monster rom. Still the same problem.
Now i cant even flash stock, as it wont detect on odin. However other galaxy core's detect and work fine.
Is there anything i can do to restore.?
Cant even take it to samsung, as it'll boot into custom recovery and they will know i messed up the phone.
Any help is really appreciated.. thanks..
Click to expand...
Click to collapse
I'd try reinstalling drivers, connecting with a different USB port, reinstalling OS.
kishankpadiyar said:
Hi,
I kinda have a similar problem. Installed cwm through adb, as the phone wont detect in odin. Then booted into recover, made backup and installed Kit-cat rom. Now the phone wont boot at all. Just comes back to recovery. I tried restoring backup, still doesnt work.
Also tried monster rom. Still the same problem.
Now i cant even flash stock, as it wont detect on odin. However other galaxy core's detect and work fine.
Is there anything i can do to restore.?
Cant even take it to samsung, as it'll boot into custom recovery and they will know i messed up the phone.
Any help is really appreciated.. thanks..
Click to expand...
Click to collapse
See whether your phone is getting detected in some other PC, there is chance your micro USB port might have been damaged.
MirXas said:
I'd try reinstalling drivers, connecting with a different USB port, reinstalling OS.
Click to expand...
Click to collapse
DMJoh said:
See whether your phone is getting detected in some other PC, there is chance your micro USB port might have been damaged.
Click to expand...
Click to collapse
Done reinstalling drivers, also changed USB cable/ports.. The thing is, other galaxy core's get detected.. Galaxy SL does, galaxy pro does.. only this particular device doesnt.!
I'll try once on other PC and get back to u..
For those stuck in recoverymode bootlop,read this article and use my zip via CWM to exit loop without odin
http://forum.xda-developers.com/showthread.php?p=50735450
DMJoh said:
Actually this is not a big issue.. but need a bit workout to solve this..
First thing is dont be panic and be aware of what you are doing..
What happened now is a sift brick.. It happened because of the errors caused during installing CWM and which prevent you from booting.
The solution is to flash your phone with the original stock firmware of Galaxy Core using Odin after going into download mode. Hope you are familiar with the process.. Feel free to ask if you have doubts.
Sent From GT-I9082 with RR v5.0.2
Click to expand...
Click to collapse
I face a harder problem considering that my I-8262 Duos, rooted and with custom CWM, blocked at the first try to install from zip Monster$. Then the bachup md5 mismatched and the device isn't detectable by Odin (any version). Flash Stock have I tried with no sucess. Adb sideload gives me a sintax error. Maybe there the error is mine. Only for notice of fellow reader. Acepting suggestions.
bjpafa said:
I face a harder problem considering that my I-8262 Duos, rooted and with custom CWM, blocked at the first try to install from zip Monster$. Then the bachup md5 mismatched and the device isn't detectable by Odin (any version). Flash Stock have I tried with no sucess. Adb sideload gives me a sintax error. Maybe there the error is mine. Only for notice of fellow reader. Acepting suggestions.
Click to expand...
Click to collapse
When you connect your device to PC, you are not getting any response from PC or is it showing USB device not recognized. Hope you have Kies and all drivers present on your PC.
Md5 mismatch is foubd for your Nandroid backup right?
First you try installing a ROM zip from recovery. Also do full data wipe,cache and all cleared. Search in forums that you can get a flashable zip of official firmware.