Related
Hello guyz..........and girls.
I see that many non-cranium users are using my kernel as well,so i decided to make a separate thread
FEatures
Based on manveru0's kernel,with the following additions/changes-
Overclock Upto 1930 Mhz
NEW CPU GOVERNORS (USE NO-FRILLS CPU CONTROL/SET-CPU TO CONTROL)
Lagfree
Smartass2
Scary
Minmax
SavagedZen
Smoothass
Brazilian Wax
InteractiveX
Hotplug
NEW I/O SCHEDULERS (USE NO-FRILLS CPU CONTROL/SET-CPU TO CONTROL)
BFQ
SIO
VR(BEST FOR ANTUTU TESTING,ALONG WITH CPU GOVERNOR "PERFORMANCE")
SFB NET SCHEDULER
LATEST SAMSUNG PATCHES
init.d support
VDD Stats Support-Software UV(USE INCREDI CONTROL TO SET!!!!!!) {Thanks to -snq}
Custom Bootanimation support-Place sanim.zip in /system/etc
CleanCache
And a hell lots of other patches!
Download
http://sakindia123.prophecy.li/downloads/cranium-rom-kernels
Instructions-
*Place the .zip in your Sd card.
*Go into recovery mode(U must have FeaMod Recovery to use this!)
*Flash the zip.
Pretty easy,huhh?
Kernel SOurces-
https://github.com/sakindia123/Cranium_Kernel
Kindly keep the thread neat and clean!
An yes,u can flash it on roms other than cranium
PS-Sneak Peek for RC8 Kernel
https://github.com/downloads/sakindia123/Cranium_Kernel/RC8-sneak-peek.tar (Flash via ODIN)
Hi sakindia,
That 1 up to date or previous 1..sorry just to confirm b4 download..
Sent from my GT-I9001 using xda premium
Its the same kernel i guess, just a new thread from the rom..
mhairy said:
Hi sakindia,
That 1 up to date or previous 1..sorry just to confirm b4 download..
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Its actually v6 of the kernel(used in rc6)'
Benchmarks show that v6 outperforms v7
oopsie daisie double post
ohhh~~THANKS a LOT!! I like this kernel. Btw, how can I change the I/O SCHEDULERS?
sakindia123 said:
Its actually v6 of the kernel(used in rc6)'
Benchmarks show that v6 outperforms v7
Click to expand...
Click to collapse
What are you going to do with test kernel rc8?
Sent from my GT-I9001 using XDA App
alextso321 said:
ohhh~~THANKS a LOT!! I like this kernel. Btw, how can I change the I/O SCHEDULERS?
Click to expand...
Click to collapse
As always...no frills or setcpu...both from market
pyronia said:
As always...no frills or setcpu...both from market
Click to expand...
Click to collapse
Setcpu can't change io schedule. Use voltage control.
Sent from my GT-I9001 using xda premium
fadzlihellmuth said:
Setcpu can't change io schedule. Use voltage control.
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
With No frills you can change the I/O.
Sent from my GT-I9001 using XDA App
anyway, just to let u know. been using rc8 for 1 day now. it works fine
annoymous1234 said:
anyway, just to let u know. been using rc8 for 1 day now. it works fine
Click to expand...
Click to collapse
could u be more specific? ... how about battery life?... how much u can get?.. and is it lag or not?
Maybe kernel RC8 solved the problem ?
Hi Sakindia,
don't want to be too pushy but on my investigations for a solution concerning the charging problem in the original cradle maybe you have a solution. I figured out that all open source kernels suffer from the same problem as mentioned here:
http://forum.xda-developers.com/showpost.php?p=11854684&postcount=1
Maybe it is possible to reintegrate the mentioned modul without loosing the advantages of the cranium kernel
Campai
Rhonin
Rhonin86 said:
Hi Sakindia,
don't want to be too pushy but on my investigations for a solution concerning the charging problem in the original cradle maybe you have a solution. I figured out that all open source kernels suffer from the same problem as mentioned here:
http://forum.xda-developers.com/showpost.php?p=11854684&postcount=1
Maybe it is possible to reintegrate the mentioned modul without loosing the advantages of the cranium kernel
Campai
Rhonin
Click to expand...
Click to collapse
Sorry.i have no idea about it
It can be done if i remove samsung patches,but that affects performance!
FaqihCici said:
could u be more specific? ... how about battery life?... how much u can get?.. and is it lag or not?
Click to expand...
Click to collapse
i lose around 3% on 6 hours idle with 122 min freq and smartassV2. most importantly there is no wakelock and no lag.
UPDATE: last night i lose only 1% for 6 1/2 hours (sleep time). i use ondemand this time, i think its better compare with smartass, gonna stick with ondemand
Nice work brother
can someone tell me what I/O schedulers exactly do? or point me a tutorial about this?
faust.deaconu said:
can someone tell me what I/O schedulers exactly do? or point me a tutorial about this?
Click to expand...
Click to collapse
I/O Schedulers
lol
As we know we have android kitkat which is one of the best os version for our phone.
by following twicks and trick this we can make it more fluent and responsive i think it will be more helpfull those facing perormance and battery problem
1) ART (ANDROID RUN TIME):
THIS IS ONE OF THE MOST EFFECTIVE WAY TO boost u r phone performance
for me my quadrant score is 3500 with art
>no lag(0 lag)
>faster opening of apps
>more touch response
drawbacks :
>as we change runtime to dalvik to art some apps may crash or may not work specifically Google gapps
solution :
there not complete solution but i go this way all is well till now
art compatible gapps http://d-h.st/hSL
art compatible android app list
http://www.androidruntime.com/list
note: art is not compatible to xposed framework so u have to uninstall xposed
2) unistall xposed :
when you go for customization u prefer xposed framework i had done same thing but when I unistalled all xposed apps and framework phone was super smooth
3) use greenify
this is root app which hibernate all installed apps except system apps so when there is no use of app it gets hibernated so no baground runup of apps so no ram compsution and no battery drain
u will get it on playstore
4) debolting of rom:
debolting of rom will space freeup all u r system and make it faster
remove only application that are safe to remove list is as below
http://forums.androidcentral.com/op...e-apks-their-purpose-safe-not-remove-big.html
to remove app just go to any root browser >system >apps and priv-app folder>delete unnecessary app
5) overclock u r Rom with battery efficient kernel:
As our great developer made cpu gpu oc/uv kernels we can use them for overclocking of rom which definaltely boost performance
this is oc kernel for resurrection remix 4.4 rom kernel but it may work on all roms as i personally used it for cm11 maclaw, beanstalk 4.4 roms except aicp rom by vikasayu where i got boot loop
http://www.androidfilehost.com/?fid=23329332407591111( thanx t4n017)
this kernel great so far in terms of performance and battery life
remember oc is not working on all phone
to tweak cpu speed u can use these apps
> nofrills cpu control ( play store)
> set cpu(play store)
go to app and set max cpu 1250 and min 200
or as per u r wish where u got performance
to tweak gpu u can use this app just flash it via cwm recovary
>novathor settings app
http://www.androidfilehost.com/?fid=23329332407587599 ( thanx t4n017)
go to gpu > set mali low load clockspeed and high load speed to max l.e 680 mhz
so u r gpu will work at full speed
or disable auto boost and set static frequency to 680 mz
Note: more than 680 mhz may cause freezing lagging and screen tearing
6) system tweaks
in cynogenmod there are number of tweaks
1) go to system >performance >enable purging of assets
2)go to system >performance >enable kernel same page merging
3) go to system >development >enable 2d drawing
7) AVOID:
1) don't use any ram booster app
2) don't use any system cleaner
3) don't use any app killer
because u r kitkat don't need this any more
BATTERY TWEAKS:
battery is major problem of cynogenmod 11 (kitkat) it's default thing because these roms are meant for performance so its affect battery than stock roms
but we can reduce heavy battery drainage nd u r phone will withstand 18-20hr
1) odex u r rom
as all stock rom are odexed so they gives performance battery life with less customization
but u can odex ur deodexed cm 11 rom by this script
http://forum.xda-developers.com/showthread.php?t=2527268
download script
go to recocery
install it
reboot phone
go to terminal eluminator
type su>enter>type odex sysapp(odex system app) or frame (odex framework) or all (odex both)
2) use greenify
3) change u r runtime to art
4)debolt u rom
5) go to system>performance >set processor abyssplug max freq:800 min freq: 200 and io schelduler to sio
i personally uses oc kernek with max 1150 min 200/ ondemand/ sioplus but i undervolted the rom
6) undervolt u r rom:
if u r using oc/uv kernel then by using novathorseetinga app u can undervolt kernel and save u r battery
go to novathor settings app > go to cpu> go to cpu voltages and set cpu undervolt as per wish but i personally uses
-25 mv
note: very high undervolting or overvolting may reboots u r phone
7) deep sleep state:
deep sleep state of phone is that when u r phone is in standby mode u.e u r not using it screen is off it goes to sleep but some process are working which cause battery drain u can change that setting
>go to novathor setting app > go to power> set deep sleep to 4
OR
USE galaxy s advance setting app> go to deep sleep stateand set it at 4
at 4 u r phone goes to high deep sleep state so no more battery drain in sleep
note: dont go for deep sleep state 5 phone may be unresponsive u have to reboot it
8) screen filter:
>this is a app on play store which deems brightness of screen backlight which helps us to protects our eyes and again on amoled screen reduces battery drain too
> personally used and voila very effective
> u can easily control filter in status bar as it has stausbar notificaton when u are outdoor just increse its percentage and when u are indoore just reduceit manually as per u r wish where u got best result
>download it at play store
once again if u have more suggestions then plz mention here so we have best set up our beloved sgs advance for
performance and battery life
Nice
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
& good job :thumbup:
Sent from my GT-I9070 using xda app-developers app
Omer89 said:
Nice
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
& good job :thumbup:
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Good job bro, keep posting "nice" "cool" and things like that. You'll reach the 10 limit posts soon!! :good:
Yes, I was being sarcastic.
t4n017 said:
Good job bro, keep posting "nice" "cool" and things like that. You'll reach the 10 limit posts soon!! :good:
Yes, I was being sarcastic.
Click to expand...
Click to collapse
i am too glad that u liked this thnx bro.
Super cool tips bro!
I hope the app killers, cache cleaners and ram booster apps will become obsolete with KitKat!:good:
App killers, cache cleaners and ram boosters have been obsolete since at least froyo where android "learned" how to take care for itself. It's only got better since then.
nice bro.. good tips n solved my battery problems.
Uninstall all xposed apps and use greenify? Im confused...
@ortek donation version of greenify is related to xposed framework to hibernate system apps but there is no need to hibernate system apps because some process must be runed by Android os as they are necessary
so don't be confuse i have mentioned here about oridinary version of greenify
So if i want to use greenify i shouldnt install xposed?
ortek said:
So if i want to use greenify i shouldnt install xposed?
Click to expand...
Click to collapse
yesvu don't need xposed for greenify
Thanks for the tip :highfive:
akhil8 said:
Thanks for the tip :highfive:
Click to expand...
Click to collapse
just press thanx button if u can ?
walpanmad said:
just press thanx button if u can ?
Click to expand...
Click to collapse
i did :good:
walpanmad said:
As we know we have android kitkat which is one of the best os version for our phone.
by following twicks and trick this we can make it more fluent and responsive i think it will be more helpfull those facing perormance and battery problem
1) ART (ANDROID RUN TIME):
THIS IS ONE OF THE MOST EFFECTIVE WAY TO boost u r phone performance
for me my quadrant score is 3500 with art
>no lag(0 lag)
>faster opening of apps
>more touch response
drawbacks :
>as we change runtime to dalvik to art some apps may crash or may not work specifically Google gapps
solution :
there not complete solution but i go this way all is well till now
art compatible gapps http://d-h.st/hSL
art compatible android app list
http://www.androidruntime.com/list
note: art is not compatible to xposed framework so u have to uninstall xposed
2) unistall xposed :
when you go for customization u prefer xposed framework i had done same thing but when I unistalled all xposed apps and framework phone was super smooth
3) use greenify
this is root app which hibernate all installed apps except system apps so when there is no use of app it gets hibernated so no baground runup of apps so no ram compsution and no battery drain
u will get it on playstore
4) debolting of rom:
debolting of rom will space freeup all u r system and make it faster
remove only application that are safe to remove list is as below
http://forums.androidcentral.com/op...e-apks-their-purpose-safe-not-remove-big.html
to remove app just go to any root browser >system >apps and priv-app folder>delete unnecessary app
5) overclock u r Rom with battery efficient kernel:
As our great developer made cpu gpu oc/uv kernels we can use them for overclocking of rom which definaltely boost performance
this is oc kernel for resurrection remix 4.4 rom kernel but it may work on all roms as i personally used it for cm11 maclaw, beanstalk 4.4 roms except aicp rom by vikasayu where i got boot loop
http://www.androidfilehost.com/?fid=23329332407591111( thanx t4n017)
this kernel great so far in terms of performance and battery life
remember oc is not working on all phone
to tweak cpu speed u can use these apps
> nofrills cpu control ( play store)
> set cpu(play store)
go to app and set max cpu 1250 and min 200
or as per u r wish where u got performance
to tweak gpu u can use this app just flash it via cwm recovary
>novathor settings app
http://www.androidfilehost.com/?fid=23329332407587599 ( thanx t4n017)
go to gpu > set mali low load clockspeed and high load speed to max l.e 680 mhz
so u r gpu will work at full speed
or disable auto boost and set static frequency to 680 mz
Note: more than 680 mhz may cause freezing lagging and screen tearing
6) system tweaks
in cynogenmod there are number of tweaks
1) go to system >performance >enable purging of assets
2)go to system >performance >enable kernel same page merging
3) go to system >development >enable 2d drawing
7) AVOID:
1) don't use any ram booster app
2) don't use any system cleaner
3) don't use any app killer
because u r kitkat don't need this any more
BATTERY TWEAKS:
battery is major problem of cynogenmod 11 (kitkat) it's default thing because these roms are meant for performance so its affect battery than stock roms
but we can reduce heavy battery drainage nd u r phone will withstand 18-20hr
1) odex u r rom
as all stock rom are odexed so they gives performance battery life with less customization
but u can odex ur deodexed cm 11 rom by this script
http://forum.xda-developers.com/showthread.php?t=2527268
download script
go to recocery
install it
reboot phone
go to terminal eluminator
type su>enter>type odex sysapp(odex system app) or frame (odex framework) or all (odex both)
2) use greenify
3) change u r runtime to art
4)debolt u rom
5) go to system>performance >set processor abyssplug max freq:800 min freq: 200 and io schelduler to sio
i personally uses oc kernek with max 1150 min 200/ ondemand/ sioplus but i undervolted the rom
6) undervolt u r rom:
if u r using oc/uv kernel then by using novathorseetinga app u can undervolt kernel and save u r battery
go to novathor settings app > go to cpu> go to cpu voltages and set cpu undervolt as per wish but i personally uses
-25 mv
note: very high undervolting or overvolting may reboots u r phone
7) deep sleep state:
deep sleep state of phone is that when u r phone is in standby mode u.e u r not using it screen is off it goes to sleep but some process are working which cause battery drain u can change that setting
>go to novathor setting app > go to power> set deep sleep to 4
OR
USE galaxy s advance setting app> go to deep sleep stateand set it at 4
at 4 u r phone goes to high deep sleep state so no more battery drain in sleep
note: dont go for deep sleep state 5 phone may be unresponsive u have to reboot it
8) screen filter:
>this is a app on play store which deems brightness of screen backlight which helps us to protects our eyes and again on amoled screen reduces battery drain too
> personally used and voila very effective
> u can easily control filter in status bar as it has stausbar notificaton when u are outdoor just increse its percentage and when u are indoore just reduceit manually as per u r wish where u got best result
>download it at play store
once again if u have more suggestions then plz mention here so we have best set up our beloved sgs advance for
performance and battery life
Click to expand...
Click to collapse
The given kernel link is dead
Can you please give another link?
akhil8 said:
i did :good:
Click to expand...
Click to collapse
That is old stuff use this kernel good in all aspect
Its boot img file
Just paste in u r rom via windows pc :-do not unpack repack u r desired rom just open it by double clicking and then paste boot img
Dirty Flash this modified rom via cwm recovery
Download link
https://docs.google.com/file/d/0B2_vOo99DI_vemFXYmpreV9hemM/edit?usp=docslist_api
walpanmad said:
That is old stuff use this kernel good in all aspect
Its boot img file
Just paste in u r rom via windows pc :-do not unpack repack u r desired rom just open it by double clicking and then paste boot img
Dirty Flash this modified rom via cwm recovery
Download link
https://docs.google.com/file/d/0B2_vOo99DI_vemFXYmpreV9hemM/edit?usp=docslist_api
Click to expand...
Click to collapse
Thanks for ypur help
Can i install this kernel on RR rom?
If not, Can you suggest me which kernel would be better for RR?
Thanks in Advance
@Ragwan yes it will work with rr rom( kitkat version only)
But keep nandroid backup if any thing goes wrong
I think given kernel link it's kernel of letest pa 4.4 rom its built with gcc 4.7 any fast and smooth no lag anymore.
Again if u want to try then use boot img of liquid smooth 3.2 its gcc 4.9 sabermod fast and smooth but i felt some reboots works great with Abysplug governor
Sent from my GT-I9070 using xda premium
In op you say about "CPU undervolt, bit in novathor setting i can undervolt only gpu....
So, CPU or GPU undervolting?
walpanmad said:
@Ragwan yes it will work with rr rom( kitkat version only)
But keep nandroid backup if any thing goes wrong
I think given kernel link it's kernel of letest pa 4.4 rom its built with gcc 4.7 any fast and smooth no lag anymore.
Again if u want to try then use boot img of liquid smooth 3.2 its gcc 4.9 sabermod fast and smooth but i felt some reboots works great with Abysplug governor
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
When i install this kernel on RR rom, it gives a bootloop.
Can you give me ULTRA kernel link?
This project is no longer being maintained. I'm no longer developing for the G1/G2 family.
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hiya fellas.
This is a sister project to my original (and ridiculously outdated) kernel for stock ROMs only. The version in this thread is the one designed to work with anything that isn't the stock firmware, i.e., AOSP, AospExtended, LineageOS, Resurrection Remix,... You name it. Even MIUI, which can be a b**** to get custom kernels supported on.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna "tweak ALL the things", use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R12
Stable Release Date: 2018-03-04
Created 2016-01-13
Last Updated 2018-05-17
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because I wanted to
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Works on any ROM as long as it isn't stock . So yes, it does. AOSP, CM LineageOS, RR... Any of these.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Reserved
Reserved
Okay... Last reserved.
Our first test build is up! Link is at the OP.
It's still a very early test build and it may (and probably does) contain issues (serious or not). You've been warned.
This build should fix PowerHAL not being disabled.
Great work. Zero bugs in the short time since flashing. Thanks.
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
BhavikRB said:
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
Click to expand...
Click to collapse
MPDecision.
Sir King Kami Nari ,
Have you modified Interactive ?
kingkaminari said:
Created 2016-01-13
Last Updated 2016-01-12
Click to expand...
Click to collapse
Lol? xd
So far so good with the kernel thanks!
@kingkaminari Wow, finally! flashing it right now, thank you so much!
I hope to see the rest of the features present on 5.1 here on M and Thank you so much!
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
espaciox99 said:
Lol? xd
So far so good with the kernel thanks!
Click to expand...
Click to collapse
Yeah . There's this little derp with the dates lol
espaciox99 said:
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
Click to expand...
Click to collapse
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
BhavikRB said:
Sir King Kami Nari ,
Have you modified Interactive ?
Click to expand...
Click to collapse
No. Interactive has been left untouched.
If you come from Hurtsky's Hybrid Kernel or Flashhhh's Optimus Kernel, don't forget to re-enable MPDecision - just rename /system/bin/mpdecisionbak to /system/bin/mpdecision.
kingkaminari said:
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
Click to expand...
Click to collapse
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
espaciox99 said:
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
Click to expand...
Click to collapse
I actually was having a similar problem to this not long ago but not this particular kernel.
Just fooling around I found that if I flashed any kernel after rebooting system I would have the problem you described, however if I flashed the ROM, Gapps, and kernel in recovery all together before initial boot everything works as it should.
Not sure why this is but I have experimented and it is the only solution I have found so far.
Mod edit: thread closed due to missing kernel sources.
Your warranty is now void. Knox 0x1.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel.
PHANTOM KERNELby 6h0st
Lots of thanks to the Aspire team members:
@DaOldMan – Aspire Rom developer
@Eleo, @galili47, @Bullmans, @Logel & @Kill-Switch - Product evaluation & Support
Special thanks:
@jcadduono
@lss1977
@Yank555
@arter97
@faux123
@gj86
... other previous developers and all future testers...
... and of course big thanks to project donors.
* Kernel Features *
Based on idle kernel by jcadduono/lss1977 source code.
Linux version 3.4.113,
Arch Power, Gentle Fair Sleepers ,
F2FS support - I recomend using F2FS for /system and /cache partitions only, but supports /data partition too - EXPERIMENTAL
Added Phantom Governor as default
(based on yankactive - optimized to use CPU frequencies for reduced battery consumtion with a little loss of performance.)
Added alucard, arteractive, intelimm, intellidemand, ondemandplus, impulse, smartmax, smartmax_eps, Lionheart, biosock, nightmare and zzmoove governors beside performace and conservative.
Added Phantom, zen, tripndroid, sioplus, bfq,fiops, deadline I/O Schedulers beside row, cfq, sio, fifo and noop.
Phantom I/O Scheduler set as defualt for Internal memory and External SD Card (if phone has one)
(Phantom I/O Scheduler is based on Maple, has Zen, VR and SIO I/O schedulers code in it, uses a first come first serve style algorithm with seperated read/write handling to allow for read biases. By prioritizing reads, simple tasks should improve in performance. Phantom I/O also uses hooks for the powersuspend driver to increase expirations when power is suspended to decrease workload.)
Max CPU frequency is 2265 mhz
Min CPU frequency is 288 mhz
CPU has 28 frequency steps.
No CPU OC - Stock CPU frequency table used for better stability
Added Fast Charging by Yank555.
Added 100, 500, 533, 578 mhz GPU steps.
7 CPU hotpluging managers: MSM, Bricked, Intelli-hotplug, Zen Decision, AutoSMP, Fast Hotplug and LazyPlug
Intelli-hotplug tweaked ,modded and added a special Lazy profile for videos, phone calls and screen off (set as default)
iotop.sh script support
Added battery power consumtion (average and current) information (mAh).
Added per CPU core control (governor and frequency)
Added Adaptive LMK
Added DoubleTap2Wake (Full/Half screen modes available)
Added Phantom Log, Phantom LED and Phantom Swap features
- LKM - Loadable Kernel Modules support
- Intelli-Hotplug update (more balanced now)
- Intelli-Hotplug (4 cores only) profiles update:
0 balanced 4 cores (default)
1 performance 4 cores (more aggesive)
2 conservative 4 cores (saves battery)
3 disable
(* Any other value other then 0-3 will set it to 3.)
(** Tweak is available at this path: /sys/kernel/intelli_plug/full_mode_profile)
- added custom suspend: enable freeze timeout configuration
(*Tweak is available at this path: /sys/power/pm_freeze_timeout)
- Fixes for DoubleTap2Wake.
- FS performance gain by 10%, in benchmark test at least.
- Modem performance tweak
- Fix for LTE only as preferred mode causing FC after a reboot;
- Fixed Call Delay;
__________________________________
How to use LKM - Loadable Kernel Modules:
The kernel comes in a basic version without all the governors, schedules, hotplugers and FS supported types of partitions, only the most common used.
If you want to use other features that aren't enabled anymore, you need to edit the /system/etc/init.d/00modules file and remove the "#" from the beginning of the lines related to the module (feature) you want to use/enable and reboot. You can activate all of them if you want.
If you want to use the basic version again, you can remove the 00modules file, if any changes were made. It will reappear on reboot, but all modules will be disabled, as default. If the file is missing after a reboot you can copy it from /sbin/scripts folder to init.d.
__________________________________
1.What does Phantom LED do?
It makes the phone's LED blink upon Wifi, Internal SD, ExtSD activity.
(Disable ROM Led notifications for this feature to work properly)
__________________________________
2.What does Phantom Swap do?
It creates a swapfile on the /data partition and starts the swapping process on boot.
The size of the swapfile is 768MB.
If /data/.phantom.swap is removed it will clean the /data partition of the swapfile remains.
__________________________________
3.What does Phantom Log do?
It enables ROM's logs, that are disabled by default.
To enable ROM's logging (logs) you need to create an empty file named '.phantom.log' in /data and reboot. (The name starts with a dot and without quotes.)
After reboot you can check if everything it's working by opening /data/.phantom.log file, with a text editor, and find this text inside: 'Logs are active and available for debugging now.'.
If the text is there you have done the procedure correctly and all logs should be available.
You can't activate logging from Kernel Adiutor-mod anymore!
__________________________________
Kernel add-on scripts can be found in /=Phantom Scripts= folder, if ramdisk/boot image is not altered (e.g. Magisk is installed).
Simple way to use a script is to copy the script from /=Phantom Scripts= to /system/etc/init.d. and reboot, except iotop.sh !
Alternative method is with Kernel Adiutor-mod or SManager or similar apps.
You can edit, save and delete the scripts from /=Phantom Scripts= folder, but all changes will be gone upon reboot! (Even if you delete all/any of the scripts). Most info on how and what to edit is inside of the scripts.
__________________________________
For best compatibility and experience I recommend using [C9 Pro Port][N900X] AspireTeam C9 Pro V4.0.
(Why? ... it's because my testing was done on to this ROM)
Mod edit: links removed
XDA:DevDB Information
Phantom Kernel, Kernel for the Samsung Galaxy Note 3
Contributors
6h0st
Source Code: Mod edit: links removed
Kernel Special Features: Based on idle kernel by jcadduono/lss1977 source code. (...read full description above.)
Version Information
Status: Stable
Current Stable Version: One
Initial Release Date: 2017-01-08
Latest developer version: 1.2z [EOL]
Latest developer version Release Date: 30.10.2018
For latest updates read the changelog of developer version that can be found in post 3 or on Facebook:
How to flash kernel:
Method for .IMG file:
[ Clean data of Kernel config app fist (Kernel Adiutor or similar apps) ! ]
1. From TWRP Recovery {INATLL} button > go to download folder.
2. Select {Images...} button from down-right-corner > select boot.img.
3. Select Boot > Swipe to confirm Flash.
Done!
Method for . ZIP file:
Download (download link in first post) and flash the zip file from TWRP / other recovery.
* Highly recommended on first flash of a new dev.ver. or if coming from another kernel *
[Backup your /system/etc/init.d scripts, Kernel Adiutor-mod data (or Synapse data from other kernels) BEFORE flashing!]
Changelog of: developer version 1.2z
- Compiled with Toolchain UBERTC 8.2.1 + GRAPHITE optimizations;
- a few bugs fixed for eur and skt variants;
- some improvements in performance and battery life.
Ouchh! Thank you!
also for smn900t?
New kernel .... Great !!! ... download but has extension IMG .. Flash recovery?
Inviato dal mio SM-N920F utilizzando Tapatalk
uzzz2004 said:
New kernel .... Great !!! ... download but has extension IMG .. Flash recovery?
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
No! Select boot / not recovery.
See "How to flash" section from fist post.
Tmobilefan906 said:
also for smn900t?
Click to expand...
Click to collapse
Yes. Flash TMO variant.
6h0st said:
Yes. Flash TMO variant.
Click to expand...
Click to collapse
sorry, wrong thread
only for TW ROMs?
i am on Resurrection Remix - very pity
moonryder said:
only for TW ROMs?
i am on Resurrection Remix - very pity
Click to expand...
Click to collapse
Samy TW only. Sorry.
6h0st said:
Samy TW only. Sorry.
Click to expand...
Click to collapse
OK, so i will try Norma ROM V17 by @Thepunisher70 and this kernel
moonryder said:
OK, so i will try Norma ROM V17 by @Thepunisher70 and this kernel
Click to expand...
Click to collapse
V17 launched already?
Sent from my SM-N9300 using Tapatalk
Oh my god, thanx a lot
Sent from my SM-N930F using XDA-Developers Legacy app
Thank you, gonna try it.
But why:
6h0st said:
No CPU OC - Stock CPU frequency table used for better stability
Click to expand...
Click to collapse
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
muhly.ibrahimsha said:
V17 launched already?
Sent from my SM-N9300 using Tapatalk
Click to expand...
Click to collapse
also waiting ...
TurricanM3 said:
Thank you, gonna try it.
But why:
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
Click to expand...
Click to collapse
Change Max CPU speed to 2.26 Ghz. Use yankactive governor if phantom is not doing the job, or try other governors.
Stock frequency table is used for stability. When booting, about 5 sec. or even more, CPU goes to max frequency. If the max frequency is 2.8 Ghz for exemple, some phones will reboot.
...
Use LSpeed app with performance tweaks but don't optimize CPU if you use phantom/yankactive governors.
Use a 30 sec delay to apply tweaks.
Another thing is temperature. If you OC you will need to activate thermal monitoring or else you might damage your CPU, but by doing that you will get a performance loss. This way a lot of the extra power from CPU you get by OC-ing, will go to thermal monitoring.
Plus the thermal monitor will limit frequencies / cores when overheating. So you will be able to use OC extra power for a short while because of overheating, giving you in fact worse performance overall. OC is generally used for benchmarking, not daily use.
TurricanM3 said:
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
Click to expand...
Click to collapse
How is your experience with kernel? You seem you dont like the performance, that is why you want OC, right?
Sent from my Note 3 using XDA Labs
Thanks 6h0st.
I wanted OC for a little more responsivness. I am no gamer. 2267 got used very rarely and just for a short time. I don't think the phone would overheat.
You aren't using CPU Boost right?
Performance is very good. Still testing. I turned off Arch power.
How to flash this kernel ????
First,
Remove previous kernel and it's depending apps like auditor or synapse and.......
In twrp recovery, instead of choosing zip file we should select imag.
Am I right?
If not , please explane( in detail ) how to flash this kernel.
Big thank.
Sent from my LG-D855 using Tapatalk
i use Kernel auditor for CPU modifications ...is there any such way for GPU ??
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Hope he respond on that. Anyway GPU is fine for this phone and OC may or may not impact battery as well
Any luck?
BELIEVER PK said:
Any luck?
Click to expand...
Click to collapse
not yet bro
sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.
Rishav Nath Pati said:
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.
Click to expand...
Click to collapse
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work
sreekantt said:
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work
Click to expand...
Click to collapse
Thanks a lot for helping me out. I've just rooted my Honor 6x. So was exited about it and trying out new things. I successfully flashed the Dolby Atmos and its working fine.