[Completed] Verizon galaxy s3 only download mode works😭 - XDA Assist

Hi I have a galaxy s3 and after I rooted it I tried installing a custom rom. I forgot to install clockwork recovery and wiped the data partition. After trying to install recovery with Odin the recovery mode stopped working telling me to visit Verizon. I tried installing stock.tar and the process failed. . I'm not sure what to do please help me out! !!

Hi there,
I think this threads will respond on your problem. If not ask directly there.
Verizon VS AT&T Galaxy S3... Which is easier to root/ return to complete stock?
[How To] Reset your phone in order to return to Verizon(Updated 12/11/2012)
Good luck

Related

[Q] PITFILE FOR galaxys5 900a

PITFILE for samsung galaxy s5
Hi there. I am trying to flash a stock rom to my gs5 900a with heimdall on my mac. the device is detected but i cant seem to download the pitfile it says claimed interface error. I think its because i system wiped my phone with safestrap when i was trying to intall a custim rom. anyhow I am softbrick state now. i cant get passed samsung galaxy window with the lock. myphone was also unlocked to use metropcs and it was also rooted. any information out there could that would help would be appreacited. thank you very much.

[Q] Need help With soft Bricked Galaxy S3 I535 Verizon Model

Alright guys so here is the whole story with how I "Soft bricked my GS3 I535 Verizon version 4.4.2
I rooted my phone with the application "Kingo Root". It worked flawlessly my phone was rooted and i was able to install SuperSU and rootchecker and a whole bunch of other great root only apps. After I realized how great rooting was I decided I wanted to change my ROM to cyanogen since that what most people seem to prefer for a rooted phone. I downloaded an earlier version of EZ UNLOCK app to unlock the bootloader to that I could access the bootloader to flash a new ROM. After I used the EZ UNLOCK and turned off my phone to get into the recovery IT WAS HARD BRICKED . Luckily though I found this thread here: http://forum.xda-developers.com/showthread.php?t=2581166 Which worked like a charm and had my device up and running again but was dependent on the new Ext SD card to boot up. When I got to the step where I was supposed to recover the Stock bootloader onto the device it seemed to work. I input the code in the Terminal that the instructions said to do with the debrick.bin file. (My file was actually a debrick.img disck image file) But I didnt think it mattered too much. After inputing the code and waiting for it to finish the process I tried to reboot to see if it would boot off of internal memory. Now it is stuck in a boot up loop AKA soft bricked i supppose. I cannot get into recovery as it is locked because of verizon stuff still.
At this point I have backups of everything I REALLY want to keep so If I can get to factory defaults even, that would absolutely fine.
PLEASE PLEASE HELP!
I apologize for the lengthy story but I feel the more info i give the easier it is for you to help.
Hi there,
Here is some threads about soft brick S3 Verizon: Help soft brick verizon galaxy s3
Read this guide: [GUIDE] Debrick your bricked SCH-I535! [BOOTLOADER/HARDBRICK]
Also, please wait until mods will move this thread to the device specific forum.
Stand by
Thanks
R_a_z_v_a_n said:
Hi there,
Here is some threads about soft brick S3 Verizon: Help soft brick verizon galaxy s3
Read this guide: [GUIDE] Debrick your bricked SCH-I535! [BOOTLOADER/HARDBRICK]
Also, please wait until mods will move this thread to the device specific forum.
Stand by
Thanks
Click to expand...
Click to collapse
Thanks man I'll be on standby

[Completed] [Q] [d2att] No ROM booting up

So, I bought this at&t Galaxy S3 with leaked UCUEMJ2 (I assume) then I tried factory resetting it. It didn't boot up after the at&t logo. I tried flashing stock 4.1.1 which was risky but odin failed in it. I also tried reflashing UCUEMJ2 and Cyanogenmod, both stucked on the starting logo. Downloading mode shows something like Warranty bit:1 with red letters which is related to knox, I suppose. Please help, I just want my phone to work no matter which rom.
Hi there,
All you need you will find in this thread:
[HOW-TO] The All-In-One Backup/Root/Flash Guide & Bootloader Support - [I747 & I747M]
[HOW TO GUIDE] How To Unbrick AT&T I747 and I747M After 4.3 OTA
For other questions please refer to this forum: AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

[Completed] Help please? Galaxy S4 i337

Okay, so apparently I screwed up greatly last night. I was trying to flash Android L 5.0.2 on my phone and after trying to flash it onto my device (using Safestrap) it did not work for some apparently reason (no md5) ,but before, I check summed the files if the codes matched and it did. So, I tried to restore and it failed and I accidentally pressed reboot and now I can't access Safestrap and stuck in a loop of the stock recovery mode.
It was running Kitkat 4.4.4
Safestrap 3.72
Phone: Rooted
Galaxy S4 SGH-i337
sorry for bad grammar, running sleepless atm
XDA Visitor said:
Okay, so apparently I screwed up greatly last night. I was trying to flash Android L 5.0.2 on my phone and after trying to flash it onto my device (using Safestrap) it did not work for some apparently reason (no md5) ,but before, I check summed the files if the codes matched and it did. So, I tried to restore and it failed and I accidentally pressed reboot and now I can't access Safestrap and stuck in a loop of the stock recovery mode.
It was running Kitkat 4.4.4
Safestrap 3.72
Phone: Rooted
Galaxy S4 SGH-i337
sorry for bad grammar, running sleepless atm
Click to expand...
Click to collapse
Here is the Safetrap discussion thread: Official AT&T S4 Safestrap Discussion Q/A by graydiggy.
If you register on xda, you can post your question there. best place to get help IMO.
Here is a guide how to unbrick your device: [GUIDE] How to Unbrick your AT&T S4 I337 OTA UCUAMF3 by nkhater.
Hope this works in your case.
Good luck !
Thread closed. Thank you!

[Completed] Rooting problems

I'm looking for help rooting my galaxy s5 SG-M900W8 running 5.1.1, I ran cf auto root with Odin it flashed an said passed, when I unplug ed the phone it was in a boot loop, I put it into recovery mode it was still saying I had no root access an that it was the original recovery, I flashed the original rogers room to get out of the bootloop as a factory reset didn't help, is there a way to root my modle on andriod 5.1.1 kingroot dose not support nor dose kingo app, I heard for the s6 running 5.1.1 you need to flash a custom kernal before rooting it this true? Can someone point my to the right place plz! This isn't my first time rooting but my first time with issues!
CeRe666 said:
I'm looking for help rooting my galaxy s5 SG-M900W8 running 5.1.1, I ran cf auto root with Odin it flashed an said passed, when I unplug ed the phone it was in a boot loop, I put it into recovery mode it was still saying I had no root access an that it was the original recovery, I flashed the original rogers room to get out of the bootloop as a factory reset didn't help, is there a way to root my modle on andriod 5.1.1 kingroot dose not support nor dose kingo app, I heard for the s6 running 5.1.1 you need to flash a custom kernal before rooting it this true? Can someone point my to the right place plz! This isn't my first time rooting but my first time with issues!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I saw you already posted into a right section so i'm gonna close this thread.
Good luck!

Categories

Resources