Hi guys,
So I got this RUU from a "friend". Here it is as promised. Have fun!
Code:
Don't try to flash this if you flashed the Lollipop RUU before this. It won't work.
Even if it does work, you may end up bricking your device.
If you end up bricking your phone, don't blame me.
Code:
0. Charge your phone to at least 60% to be on the safe side
1. Copy the file to an sdcard
2. Rename it to 0PAJIMG.zip
3. Turn off the phone
4. Press and hold valume down + Power till the HBOOT screen shows up
5. Follow the instructions
Don't forget to hit thanks if this helps you..
Hash Values: (please verify before flashing)
Code:
SHA1: A3492D5096005187DA1423416532B4932EC8BF21
MD5: 1A14A2DD4DDDF822E903D8EDAE885A77
CRC32: 355CEF2F
Download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks buggerman for the effort. I am downloading it.
@ buggerman
i'm getting an error message saying
Device halted due to Large Image update fail! Press <POWER> to reboot.
Click to expand...
Click to collapse
I'm on stock recovery and s-on
Pls help
iamsuperuser said:
@ buggerman
i'm getting an error message saying
I'm on stock recovery and s-on
Pls help
Click to expand...
Click to collapse
Did you relock bootloader first?
Captain_Throwback said:
Did you relock bootloader first?
Click to expand...
Click to collapse
No i did not relock bootloader . Is it necessary ??
I'm on s-on , is s-off required for flashing ruu ??
iamsuperuser said:
No i did not relock bootloader . Is it necessary ??
I'm on s-on , is s-off required for flashing ruu ??
Click to expand...
Click to collapse
I think bootloader lock is required. As far as I know, S-Off is only required if you're flashing some other CID RUU..
buggerman said:
I think bootloader lock is required. As far as I know, S-Off is only required if you're flashing some other CID RUU..
Click to expand...
Click to collapse
How do I get s-off , sunshine did not work on 1.26.720.6
You said s-off maybe possible on 1.25.720.3, so where can I get 1.25.720.3 ??
iamsuperuser said:
How do I get s-off , sunshine did not work on 1.26.720.6
You said s-off maybe possible on 1.25.720.3, so where can I get 1.25.720.3 ??
Click to expand...
Click to collapse
SunShine doesn't work on all devices. Depending on the error message SunShine gave you when you tried it, you may just have to wait until SunShine 3.0 is released.
But yes, if you are S-ON, you MUST relock your bootloader to run an RUU.
Captain_Throwback said:
SunShine doesn't work on all devices. Depending on the error message SunShine gave you when you tried it, you may just have to wait until SunShine 3.0 is released.
But yes, if you are S-ON, you MUST relock your bootloader to run an RUU.
Click to expand...
Click to collapse
Is it possible to relock with s-on ??
Coz in THIS thread it says i must be s-off
Pls help
iamsuperuser said:
Is it possible to relock with s-on ??
Coz in THIS thread it says i must be s-off
Pls help
Click to expand...
Click to collapse
You only have to relock if you are S-ON. Just a simple "fastboot oem lock" takes care of that. But then you have to immediately flash a proper RUU to get back to a working device.
That thread you linked is unrelated to any of this. That's specifically for people that are already S-OFF.
Captain_Throwback said:
You only have to relock if you are S-ON. Just a simple "fastboot oem lock" takes care of that. But then you have to immediately flash a proper RUU to get back to a working device.
That thread you linked is unrelated to any of this. That's specifically for people that are already S-OFF.
Click to expand...
Click to collapse
Ok then to unlock Again " fastboot oem unlock " is that it ??
Sorry about the htc 101 Qs.
iamsuperuser said:
Ok then to unlock Again " fastboot oem unlock " is that it ??
Sorry about the htc 101 Qs.
Click to expand...
Click to collapse
No, you unlock following the instructions at HTCDev.
buggerman said:
Hi guys,
So I got this RUU from a "friend". Here it is as promised. Have fun!
Code:
Don't try to flash this if you flashed the Lollipop RUU before this. It won't work.
Even if it does work, you may end up bricking your device.
If you end up bricking your phone, don't blame me.
Code:
0. Charge your phone to at least 60% to be on the safe side
1. Copy the file to an sdcard
2. Rename it to 0PAJIMG.zip
3. Turn off the phone
4. Press and hold valume down + Power till the HBOOT screen shows up
5. Follow the instructions
Don't forget to hit thanks if this helps you..
Download
Click to expand...
Click to collapse
Man,you're a life saver!!! Do you know how long I've waited for this... ?
rdheepak said:
Man,you're a life saver!!! Do you know how long I've waited for this... ?
Click to expand...
Click to collapse
Glad I could help!
Sent from my HTC One_E8 dual sim
Can I flash and return to stock with twrp with this RUU ?
@Captain_Throwback.... I tried lollipop and now running phone with Twrp recovery. so If I put stock recovery and lock device can I execute this RUU. Earlier I was having error saying I am on newer version.
demail2006 said:
@Captain_Throwback.... I tried lollipop and now running phone with Twrp recovery. so If I put stock recovery and lock device can I execute this RUU. Earlier I was having error saying I am on newer version.
Click to expand...
Click to collapse
You can if you're S-OFF. Otherwise, no.
However, if you're unlocked and S-ON, there is a way to downgrade your ROM but leave the Lollipop firmware installed. It requires decrypting the RUU and creating a bootloader-flashable zip of boot, system & recovery from this RUU, which can be flashed via HBOOT directly on the device or through fastboot RUU mode. It doesn't require locking the device either, but it will delete your data and internal storage.
@buggerman i download your RUU rom and installed it i face no error throw installing but the device keep rebooting when working with wizard and after finishing the wizard quickly no network appear on both cards with unknown base-band please see my phone var's
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.12.30.0109
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.720.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -------
(bootloader) imei: 35282506xxxxxxx
(bootloader) imei2: 35282506xxxxxxx
(bootloader) meid: A10000xxxxxxxxxxx
(bootloader) product: mec_dwgl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ40000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ca994270
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
ansi_11111 said:
@buggerman i download your RUU rom and installed it i face no error throw installing but the device keep rebooting when working with wizard and after finishing the wizard quickly no network appear on both cards with unknown base-band please see my phone var's
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.12.30.0109
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.720.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -------
(bootloader) imei: 35282506xxxxxxx
(bootloader) imei2: 35282506xxxxxxx
(bootloader) meid: A10000xxxxxxxxxxx
(bootloader) product: mec_dwgl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ40000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ca994270
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
Click to expand...
Click to collapse
This is strange. It worked perfectly for one of my friends. I guess the only difference was that he is S-ON and is not on a SuperCID, but I don't think that matters here.
buggerman said:
This is strange. It worked perfectly for one of my friends. I guess the only difference was that he is S-ON and is not on a SuperCID, but I don't think that matters here.
Click to expand...
Click to collapse
How to bring my device back any idea
ansi_11111 said:
How to bring my device back any idea
Click to expand...
Click to collapse
Have you tried the TWRP backup restore?
Sent from my HTC One_E8 dual sim
Related
Hi Guys, need your help on this.
I was using Fall Out Custom Rom. and then I want to restore back to my stock with S-ON of course. but after I run RUU, I've got bootloader version error, and right now just stuck in HBOOT/Fastboot. I cannot access ADB. I'm trying to find latest RUU, but there is no version higher than mine.
My Fastboot getvar all :
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3805.06.02.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.04.401.1
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4193mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Are you able to help?
Thanks.
Remove your serial and IMEI from the post...
suku_patel_22 said:
Remove your serial and IMEI from the post...
Click to expand...
Click to collapse
Ok. Can help with my question?
Use Gold Card - Not working
I manage using gold card and flash ruu 2.10 but still not working cause my main version is > 3. Anybody can help? please....
try reading this thread
http://forum.xda-developers.com/showthread.php?t=1728513
some ideas you can try
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Jack_R1 said:
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Click to expand...
Click to collapse
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully. can i please have a link 2 the latest version 2 please please
Thank you very much.
Click to expand...
Click to collapse
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
kisame d shark said:
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
unlock bootloader
hansgregory said:
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
Click to expand...
Click to collapse
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
Click to expand...
Click to collapse
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
ahmedsalahais said:
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
Click to expand...
Click to collapse
Snap. I'm in exactly the same boat
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
hansgregory said:
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
Click to expand...
Click to collapse
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
dannyhoughton74 said:
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
Click to expand...
Click to collapse
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
ahmedsalahais said:
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
Click to expand...
Click to collapse
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
kisame d shark said:
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
Click to expand...
Click to collapse
IMO is that you dont need to flash the firmware, since you already said that you've already unlock the bootloader. I did flash the firmware because i want to unlock my bootloader.
I download this recovery image www.4ext.net/ddl/saga/recovery.zip, I flash this image in fastboot and the recovery installed successfully, maybe you can try it also.
after that you can install tacoroot for temporary root and misc version your device image version, then you can install ruu afterward.
hansgregory said:
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
Click to expand...
Click to collapse
My problem is complex. Hboot is 0.98.0002 so i can't use HTCDev to unlock. At the same time adb is not working so i can't s-off. RUUs of 2.x or 1.x do not work either as latest image was 3.x .
I think i need to upgrade Hboot (somehow) to enable HTCdev Unlock then downgrade and s-off. That may require RUU > 3.x ... and it must be RUU not OTA or update package.
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
hansgregory said:
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
At first i wasn't able to. Then i edited android-info.txt inside firmware.zip to fake it to support middle east. But it just load and check without asking for apply!
Hello, i'm new guy on this forum. I'm going back from s-off to s-on and official stock t-mobile ruu and i'm using tutorial form this forum. But then i try install RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U_38.03.02.11_M_release_180106_signed i'm getting this ERROR[170]: USB CONNECTION ERROR. But my phone is properly connected, i tried europe ruu(no usb erros), but then i got cid error.
Hboot 0.98.0000
cid t-mob005
Ok, turn in bootloader and now no usb error, but now i'm getting bootloader error 140. Any suggestions?
I'm using this ruu RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U_38.03.02.11_M_release_180106_signed
My phone info
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.401.4
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
It seems that you used an European unbranded RUU. To fix you have to create a goldcard, use the 1.47.401.4 RUU again to have a booting system, then change the main version and after that flash the TMOB RUU again
Sent from my HTC Desire S
thanks, but now i got another problem, my phone turn only in bootloader(but i cant see it using adb devices). But i can choose fastboot and then i see my device using fastboot devices. So i'cant get card cid maybe there is another way to get goldcard?
cezzka said:
thanks, but now i got another problem, my phone turn only in bootloader(but i cant see it using adb devices). But i can choose fastboot and then i see my device using fastboot devices. So i'cant get card cid maybe there is another way to get goldcard?
Click to expand...
Click to collapse
Use this to get the CID
Then this to make the GoldCard
Big thanks to amidabuddha. Finally i flashed 1.47.401.4 RUU(phone is booting fine), so how i can change main version to install TMOB RUU?
cezzka said:
Big thanks to amidabuddha. Finally i flashed 1.47.401.4 RUU(phone is booting fine), so how i can change main version to install TMOB RUU?
Click to expand...
Click to collapse
Follow this guide.
When you are done I suggest to fill the offset 00000000 to 00000170 of your sdcard with zeroes (as it was before) because various users reported that running a device with a goldcard inside can cause issues.
amidabuddha said:
Follow this guide.
When you are done I suggest to fill the offset 00000000 to 00000170 of your sdcard with zeroes (as it was before) because various users reported that running a device with a goldcard inside can cause issues.
Click to expand...
Click to collapse
Thanks again ! you and this forum really helped me. Now i got what i wanted
Thanks
amidabuddha said:
Use this to get the CID
Then this to make the GoldCard
Click to expand...
Click to collapse
I've signed up JUST to say thanks for this post. Bacon saved.
Help!?
Im a bit confussed, im desperately trying to get back to stock ics but can work out how, i have what seems to be a rare cid: TMOB005, my phone is S-ON, can i use this method?
Thanks!
im having this exact problem same phone same ruu flashed
amidabuddha said:
It seems that you used an European unbranded RUU. To fix you have to create a goldcard, use the 1.47.401.4 RUU again to have a booting system, then change the main version and after that flash the TMOB RUU again
Sent from my HTC Desire S
Click to expand...
Click to collapse
im having this exact problem same phone same ruu flashed can you please tell me what is the 1.47.401.4ruu please give me a link where to download it also i tried to make a gold card think i did but i dont know how to use it as on my bootloader it dont say update from zip on sd card anymore also its got s-on. please help
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei: 352103050279088
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
hogol said:
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
Click to expand...
Click to collapse
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
khan.orak said:
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
Click to expand...
Click to collapse
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
hogol said:
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
Click to expand...
Click to collapse
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
hogol said:
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
Click to expand...
Click to collapse
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
khan.orak said:
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
hogol said:
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
Click to expand...
Click to collapse
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
many mpurnm
khan.orak said:
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
Click to expand...
Click to collapse
yes done it twice
thing is
after it said done in command prompt, the green progressbar wouldn't leave, i mean it was stuck at the green progress bar
the thing is, i waited for a while for it to finish, a lil bit was left at the end in the progressbar, but it said done in command prompt
so after a lot of waiting, i just hard reset it, but after that the phone is not booting into bootloader and not responding at all
what is happening?
khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
Click to expand...
Click to collapse
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
hogol said:
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
Click to expand...
Click to collapse
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
khan.orak said:
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
Click to expand...
Click to collapse
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
hogol said:
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
Click to expand...
Click to collapse
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
khan.orak said:
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
Click to expand...
Click to collapse
cant believe this is happening to me
phone wont even respond to charging, absolutely nothing...
i dont know what to do now :crying:
ota/ruu
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
this is where i found what vi needed http://androidruu.com/?developer=Ville
Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg
karlangazz said:
Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg
Click to expand...
Click to collapse
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
andybones said:
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Click to expand...
Click to collapse
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!
karlangazz said:
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!
Click to expand...
Click to collapse
I'd use the latest 5.0.1
andybones said:
I'd use the latest 5.0.1
Click to expand...
Click to collapse
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Yea try supercid, then ruu again
fastboot oem writecid 1111111
andybones said:
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
Yea try supercid, then ruu again
fastboot oem writecid 1111111
Click to expand...
Click to collapse
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!
karlangazz said:
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!
Click to expand...
Click to collapse
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk
dottat said:
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!
karlangazz said:
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!
Click to expand...
Click to collapse
No problem man. Always glad to help!
Sent from my HTC6535LVW using Tapatalk
dottat said:
No problem man. Always glad to help!
Click to expand...
Click to collapse
Nicely done, magic.
Hello ,
Today I want test new rom but I get error in TWRP recovery can't mount system cache data I tried other recovery (4ext) same problem , wipe data system .... not succeed
I tried to flush a RUU (I flush this RUU version always in my phone with succeed ) after relock bootload S-ON I stuck in 39% I think it's stop in dzdata
know my phone stuck in black screen and HTC logo with 4 triangles in corner
Hboot just have RUU in yellow
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.53
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3781mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) hbootpreupdate: 11
Thank for help .
popo020 said:
Hello ,
Today I want test new rom but I get error in TWRP recovery can't mount system cache data I tried other recovery (4ext) same problem , wipe data system .... not succeed
I tried to flush a RUU (I flush this RUU version always in my phone with succeed ) after relock bootload S-ON I stuck in 39% I think it's stop in dzdata
know my phone stuck in black screen and HTC logo with 4 triangles in corner
Hboot just have RUU in yellow
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.53
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3781mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) hbootpreupdate: 11
Thank for help .
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/htc-sensation/help/recovering-data-mount-issues-t2859588
Thank you for reply
but I have different problem in Hboot I don't have any option like fastboot/recovery/rest ...
I have only RUU with yellow color like in this image
i1160.photo bucket.com/albums/q492/arjaycabling/bcefc324-8e37-45be-b07d-a75c1b164a73_zpsac8ba21f.jpg
please help
popo020 said:
Thank you for reply
but I have different problem in Hboot I don't have any option like fastboot/recovery/rest ...
I have only RUU with yellow color like in this image
i1160.photo bucket.com/albums/q492/arjaycabling/bcefc324-8e37-45be-b07d-a75c1b164a73_zpsac8ba21f.jpg
please help
Click to expand...
Click to collapse
post it again
i can't see it
but i think you have stuck in ruu mode
This what I have in my HBOOT
=================================
*** RELOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
RUU
=================================
like in this picture
#remove space from link
Code:
i1160.photo bucket.com/albums/q492/arjaycabling/bcefc324-8e37-45be-b07d-a75c1b164a73_zpsac8ba21f.jpg
If I want flash anything by fastboot i get
Code:
FAILED (remote: 12 signature verify fail)
popo020 said:
If I want flash anything by fastboot i get
Code:
FAILED (remote: 12 signature verify fail)
Click to expand...
Click to collapse
since you are relocked you are limited to fastboot commands
try this one
fastboot reboot bootloader
edit: by the way did you use any wipe option from TWRP ?
rzr86 said:
since you are relocked you are limited to fastboot commands
try this one
fastboot reboot bootloader
edit: by the way did you use any wipe option from TWRP ?
Click to expand...
Click to collapse
yep this is it start with this problem I use wipe from TWRP but didn't work so I decide go back to stock RUU and have this problem
Code:
fastboot reboot bootloader
back to same black screen with htc logo and 4 triangle
popo020 said:
yep this is it start with this problem I use wipe from TWRP but didn't work so I decide go back to stock RUU and have this problem
Code:
fastboot reboot bootloader
back to same black screen with htc logo and 4 triangle
Click to expand...
Click to collapse
you shouldn't use any wipe option from twrp
your system and data partitoin are corrupted probably
also you are stuck in ruu mode
try to flash the ruu manually
see how it goes
otherwise your only option is the thread i gave you in my previous post
Thank you again
but Bootloader can't find PG58IMG.zip in my SD card how can I flash the RUU manually
phone stuck in 39% when start system flashing
popo020 said:
Thank you again
but Bootloader can't find PG58IMG.zip in my SD card how can I flash the RUU manually
phone stuck in 39% when start system flashing
Click to expand...
Click to collapse
try with fastboot flash zip pg58img.zip
rzr86 said:
try with fastboot flash zip pg58img.zip
Click to expand...
Click to collapse
I got this error :crying:
Code:
FAILED (remote: 12 signature verify fail)
any help bro ?
At first you said you have relocked your bootloader in order to flash the RUU.You have not S-OFF so you are forbidden to use the recovery right now and probably you are stuck in RUU mode.
As long as you have "relocked" status you could unlock your bootloader again by using the command
Code:
fastboot oem unlock
or by flashing the Unlock_code.bin again
Code:
fastboot flash unlocktoken Unlock_code.bin
After those steps you should have access to bootloader again and you should be able to use recovery to correct (the possibly corrupted) partitions by using the guide that gave you rzr86.
http://forum.xda-developers.com/htc-sensation/help/recovering-data-mount-issues-t2859588
It's a painful proccess but it is the only solution I can think right now.
---------- Post added at 03:53 AM ---------- Previous post was at 03:35 AM ----------
You could also check this guide out how to reformat a partition from recovery.(This guide is for HTC One and the /data partition number is probably not the same with the sensation /data partition number but I think it's a good start to read this solution)
---------- Post added at 04:06 AM ---------- Previous post was at 03:53 AM ----------
If you have access to recovery you can use adb shell to give the command
Code:
cat /proc/emmc
so you can see the numbers for every partition in your device.
You can also check this guide out.
for
Code:
fastboot oem unlock
give me this error
Code:
(bootloader) [ERR] Command error !!!
OKAY [ 0.018s]
finished. total time: 0.019s
and for
Code:
fastboot flash unlocktoken Unlock_code.bin
pass successfully but nothing happen to screen I don't have any room in phone to unlock it
and adb commands don't work fastboot only work
popo020 said:
for
Code:
fastboot oem unlock
give me this error
Code:
(bootloader) [ERR] Command error !!!
OKAY [ 0.018s]
finished. total time: 0.019s
and for
Code:
fastboot flash unlocktoken Unlock_code.bin
pass successfully but nothing happen to screen I don't have any room in phone to unlock it
and adb commands don't work fastboot only work
Click to expand...
Click to collapse
The first command doesn't always work but the unlocktoken should unlock your bootloader again.
If you use the command
Code:
fastboot reboot bootloader
after the flash of unlocktoken you should be able to see the bootloader on the next reboot.(If you can't just try to remove the battery for some time ,put it back in and press (power) + (vol-) to get the phone in bootloader mode.
Adb commands doesn't work on fastboot or RUU modes.You can only use adb by using a recovery with that capability or with a working rom.
Anyway...If nothing of them can help you you could try (by relocking your bootloader at first) to flash an extracted system.img from an RUU by using fastboot
Code:
fastboot flash system system.img
You should better try to erase data and cache partitions before you reboot and see if you have a working ROM.
Code:
fastboot erase userdata
fastboot erase cache
fastboot reboot
Thank you for reply , I have only the tow screens displayed exactly like the image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And [VOL -] +[ POWER BUT ] give the black screen
I think unlocktoken need ROM installed for choosing between unlock or not
and all flash commands failed
Code:
FAILED (remote: 12 signature verify fail)
:crying:
popo020 said:
for
Code:
fastboot oem unlock
give me this error
Code:
(bootloader) [ERR] Command error !!!
OKAY [ 0.018s]
finished. total time: 0.019s
and for
Code:
fastboot flash unlocktoken Unlock_code.bin
pass successfully but nothing happen to screen I don't have any room in phone to unlock it
and adb commands don't work fastboot only work
Click to expand...
Click to collapse
popo020 said:
Thank you for reply , I have only the tow screens displayed exactly like the image
And [VOL -] +[ POWER BUT ] give the black screen
I think unlocktoken need ROM installed for choosing between unlock or not
and all flash commands failed
Code:
FAILED (remote: 12 signature verify fail)
:crying:
Click to expand...
Click to collapse
As I saw in your first post here you are saying you have hboot 1.27 (probably from a command you gave in RUU mode)
Code:
fastboot getvar all
Now as I can see in the image your bootloader status seems to be 0.85 for the model ACE (HTC DESIRE HD).If this is an enginering HBOOT and you reverted to S-ON you probably breaked your device.I just don't get it!
HTC Desire HD HBOOT
HTC Sensation HBOOT
The sensation phones are PYRAMID models!
If it has to do with wrong flash you could try this guide.
But before you try anything give the command
Code:
fastboot getvar all
one more time and copy-paste everything here.
the image not from my phone I found it in the net , just to show you what look like
This what I have in my HBOOT
=================================
*** RELOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
RUU
=================================
and getVar All
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.53
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3930mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If you cannot unlock your device from relocked status and you cannot flash anything to it I don't think I can help you further.You can always use varius tools like riffbox to repartition emmc chip or maybe to s-off your device (Too).
Are you apsolutely sure you tried to flash a signed system.img with relocked bootloader and it didn't flash??