Related
My infuse when turned on goes to a screen that looks like phone ! pc with the message "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". So this happens even when I try and go to download mode or recovery mode. Basically as soon as I hit the power button. I'm really freaking out. It was rooted and I was doing following this link: http://forum.xda-developers.com/showthread.php?t=1613523
Then the problems started when my computer didn't recognize the phone in download mode. and then it was recognized so I started the Odin flash. Then it froze at cache.rts (I believe that's what Odin said, I can't get to it anymore)...So I uninstalled and reinstalled the drivers and did it again and it got to factoryfs.rfs before it froze there for a really long time. So I unplugged it and tried to do GTG Ultimate Unbrick...but I can't get the .zip file to open. My computer keeps telling me "Can Not Open ____ as archive". I re-downloaded it and same result. Is there anything I can do to save my phone? I'm a real idiot and this kind of stuff always happens to me no matter how much I read up on something and make sure I'm doing it right. I would really appreciate a little help though, thanks!
I actually got it downloaded and followed Rammstein874's video on youtube on how to do it and I am once again stuck on factoryfs.rfs :-(
What can I do at this point? It is still stuck at the Phone-!-PC screen when I try to go to download mode. Please help, I'm starting to get pretty worried about this...
When your screen is phone!computer, that's an alternative version of download mode. You can either use ODIN or heimdall back to stock. Just plug it in via usb, allow odin/heimdall to recognize it and start flashing.
This is correct....if you see those pic on your phone that is a form of download...i would run the one click method...
sfgiants2010 said:
Rammstein874's video on youtube
Click to expand...
Click to collapse
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
jscott30 said:
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Lemma know if that's the one..pm sent...
Sorry I was at work all day.
This is the video link I used: http://www.youtube.com/watch?v=y1HgcZrYR_4
I am also looking at the following one-click method posts:
- http://forum.xda-developers.com/showthread.php?t=1331381
- http://forum.xda-developers.com/showthread.php?t=1524081
* I used the above link (or tried) and it didn't seem to work either. I downloaded Heimdall Suite for Windows 64bit and then installed the drivers and plugged in my phone in download mode. But then I was unable to get it started...I used the "Stock_SGH_I997_UCLB3_Repartition-One-Click.jar" file I found on mediafire (because all of these posts link to mediaupload which is no longer working). Anyway, so I tried to run Heimdall-frontend.exe on windows and once it opened up I connected my phone (nothing turns green like the post says) and hit browse. I chose the jar file aforementioned and it said "tar header contained invalid file size."
So if someone could point me toward a more up to date thread if I'm using the wrong one and kind of explain to me how to get around the other problem I'm having with the jar file then I would be forever appreciative
Not sure what you did...not saying you did something wrong but here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
why are you using these other programs...idk,
I just click on the one click file it an executable design to open and run itself...you say attach the jar file...why the suite version of heimdall...?
did you download the links i provided and just use those...?
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
Is your phone still stuck on the phone-!-pc ?
did you read the last post he had regarding the actual heimdall program suite...
not sure what he had going on...I believe he has download mode capability...
thx ''Goshujin-sama'' qkster
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
qkster said:
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
Click to expand...
Click to collapse
that's when I started to question him on these other programs...due to the one clicker is self sustained as a exe...idk...but believe he log off...i will monitor and holler at you if required thank you...
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
It should of rebooted it self the phone...
Btw you are not wasting my time...wife is watching cup cake wars...so ....rather help you...lol
sfgiants2010 said:
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
Click to expand...
Click to collapse
Once the connected bar is on, you click flash. It should complete it's routine. the phone reboots. you should click on the boot loader box. you disconnect. let it finish. set it back into donwload mode and flash again.
you can try different usb port or data cord or different pc
Plus you have my master...qkster here...cuz you lost me on the programs you were using...so i called in the jedia master!
As long as your screen has that Phone! Computer sign, it's not bricked yet. I recommend you to search some how to videos online so you can see the exact instructions on how to use heimdall because it's that easy. If possible maybe one of our awesome contributors can make a how to video for heimdall.
I believe he is tracking now qkster is providing....thx
So I rooted my phone for the first time via Odin. And it worked -- after that, I tried to install a custom ROM (slim bean) -- I ended up uploading the non zipped version on my SD card. And I went through all the steps to install up until "format/system" to realize that I didn't have the zipped files.
Now my phone is stuck on the Samsung Icon. I just tried to use Odin to flash the stock gingerbread again, but there it gets stuck on "Setup Connection".
Please help! Total newb at this, and clearly it failed.
---
My phone wouldn't turn off even with Odin closing, so I took out the battery -- so now my startup screen is
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
How do I fix this?
That is kind of a secondary download mode.. odin or heimdall should detect your phone.
Make sure you have a good usb cable and maybe try switching usb ports.
Sent from my SGH-I997 using xda app-developers app
Right. To add to andros11's post, was the top left box yellow in Odin before you clicked start? Odin will acknowledge that your phone is connected immediately (the box should be yellow if you your phone is connected properly). Of course, make sure you have all of the appropriate drivers (i.e. download Kies for the Infuse).
Also, for future reference, I have a fix for situations like yours so you don't have to go back to stock. Basically, you can use adb to push the correct zip file to your sdcard. What you do is:
Download and install the Android SDK: http://developer.android.com/sdk/index.html
Make sure to install platform tools (a separate download from within SDK)
In Mac and Linux, open up Terminal. I can't remember how Windows works, sorry! Navigate to wherever the platform tools folder is. You have to do this using command line, so, cd <the/path/to/your/folder> (the easiest way is to just type cd, hit the space bar and then drag the folder to the Terminal window).
Once there, connect your phone to your computer. It can be in CWM or Download mode
Type in Terminal: adb devices
The next line - the response - should tell you if your phone is recognized. If it's blank, try again. If it's still blank, you might try disconnecting usb phone cable and reconnecting again. You might also try going into download mode.
Okay. Next type: adb push <here, just drag the zip file to your terminal window> /sdcard/
Give it time to push the file to the sd card. Repeat if necessary (if you have more than one zip)
Exit terminal, disconnect phone from computer, go back into recovery, navigate to the sdcard to flash and lo and behold! The proper zip file is there for you!
This might sound long, but it's so easy. Getting SDK set up is probably the biggest pain and it's not really that much of a pain!
You may want to give Heimdall a try rather than Odin.
Put the phone into download mode and try this:
http://forum.xda-developers.com/showthread.php?t=1331381
Thanks so much everyone. Seriously.
So, Whizzpopper -- I *think* I installed SDK, but since my phone still says, "Firmware upgrade encountered issue. Please select Recovery mode in Kies and try again." I tried connecting it to Kies -- and it says "connecting" but never connects.
And even if I try the key combo to get to Download Mode or Recovery, it never gets away from that Firmware message.
How can I just get out of that mode?
how to keep fb sync on custom rom?
Hi I am a fairly new member, I have been following different threads for a long time but have recently signed up, so if i am posting in the wrong thread I sincerely apologize. moving on...
I have been using the Aeon 1.4 rom for awhile now and have been loving it. I first downloaded the rom without the stock libs and found that it is much faster than the stock libs rom, even after manually removing most of my stock apps via sd maid pro. But it has been the only way to keep the option to share with FaceBook. and being able to add facebook in my accounts and sync are in system settings. system settings>accounts and sync>add account.
You won't be able to get out of there until you are able to flash with either odin or heimdall.
You may also try a tool called one-click unbrick (google it)
Sent from my SGH-I997 using xda app-developers app
andros11 said:
You won't be able to get out of there until you are able to flash with either odin or heimdall.
You may also try a tool called one-click unbrick (google it)
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
ONE CLICK UNBRICK HAS GOTTEN ME OUT OF THAT GODFORSAKEN FIRMWARE MESSAGE.
Thank. You. So. Much.
... Now to follow the rest of the steps to try and get it back to some sort of operating phone!
and please note that it would be best to uninstall kies- it has been a source of problems for a countless number of users.
Thank you so much for your help!
So the terminal adb push worked -- and I installed my ROM (went through all the installation wizard parts, etc.) but now at reboot, I'm still stuck at the Samsung logo.
What happened?
@andros11 -- I saw your comment on how to best get from GB to JB
http://www.android.gs/install-unoff...pdate-to-ice-cream-sandwich-4-0-3-custom-rom/
I tried to follow those instructions to install ICS first, (I was previously too eager and went straight to JB!) and still I'm stuck at the Samsung screen.
Anybody have any threads, recos to get my phone to bootup to any system?
Sorry for the newbness!
Enter download mode to Go back to stock gb and then work your way up again up to jb.
Sent from my SGH-I997 using xda app-developers app
To add to that, use qkster's link to get back to stock.
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda premium
Okay so I tried the Heimdall One Click Stock --
unfortunately, it stops working at the "clearing interface" stage -- says it failed. And I've changed the cables but still the same result.
You are on the right track... just that something is missing.
Be sure to get rid of kies.
Be sure you have the latest version of Java. http://www.java.com/en/
Use the link in post 13 that psal gave you - read at least posts 1 and 2 all the way through, then go through and perform each step.
The first time is a process, after that it is quick and easy. Thanks to qkster. :good:
Here is an award winning-less video of the process that you might want to watch as you may see a step in the video that you are missing. Hope this helps.
http://www.youtube.com/watch?v=sHyY7WHx4zc
Nothing in this world can take the place of persistence. Talent will not; nothing is more common than unsuccessful people with talent. Genius will not; unrewarded genius is almost a proverb. Education will not; the world is full of educated failures. Persistence and determination alone are omnipotent.
Calvin Coolidge
I have been trying so hard to get this to work, but absolutely no one seems to be willing to help me out.. I have been working on rooting my 4.0.4 Kyocera Rise now for several weeks but apparently am really doing something wrong. I have downloaded the Sdk manager, Eclipse, java development toolkit, and the drivers for my phone, but I'm not sure what to do beyond downloading them. I have installed and updated everything sdk manager said to. I've used at least 8 or 9 different rooting programs but none work. The one that is apparently my best best is the one called Binary, which can root ice cream like mine. I go through the process and I hit restore, it reboots, but then it says, "going to copy files to it's place. Mount: permission denied (are you root?) I just can't figure out where I'm going wrong. Someone please help??
And still no one is helping me.
zrog09 said:
And still no one is helping me.
Click to expand...
Click to collapse
OK the first thing u is look up a rooted stock image of your phone download it and then extract it to your desktop it might be 7zip rar or some
kind of zip file get the right software from the internet have this on your computer desktop
then download odin to your computer extract odin thn select the odin file with the colors on it and click run as administrator when odin boots up get your phone and boot itinto downloadmode if you dont know how look it up when its in downloadmoad then connect it to your comp make sure u have the right drivers installed
When u hook your phone to a computer go to Odin and then click PDA it will open a file browser and look for the unzipped rooted stock image select it if the upper right hand bar is yellow in Odin click start wait for it to flash the rooted stock image then if says pass reboot and now u have a rooted phone
Hope that helps
Srry if my typing is not the best
Solved: stuck at "Firmware upgrade encountered an issue. Please select recovery mode
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
Hi. Tried your method and it worked on windows. I tried 2 different ODIN softwares before it worked. Thanks for your help and information.
can't enter download mode
thanks for the notes. i tried to update to 4.2.2 from 4.1.2. the upgrade was unsucessfull. now i did whatever u have told. now i got the recovery but i can't enter download mode. now the tab 2(p3100) is just restarting. please help me as soon as possible
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
pls help..
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
kies is not nesccearlly needed we need the usb drivers make sure you installed them and you are using stock samsung usb cable or else IT WON"T WORK !!!
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
If you can reach to the CWM recovery mode: Download firmware in zip form, you can get it from the below link. if you have a zip file leave it.
After obtaining the firmware copy to your external sdcard using a card reader or any other method
In recovery mode select "Instal zip from sdcard" then select "choose zip from external sdcard" then select the copied firmware zip file from the list and wait for completion
After completion go back and select "wipe data/factory reset" and "wipe cache partition" reboot . it will take some time for reboot atleat 15min. it worked for me. hope it will work for you. good luck
http://forum.xda-developers.com/showthread.php?t=2054901
Thanx...
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
shubham.butle said:
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
Click to expand...
Click to collapse
You can choose any of the roms, deodexed will be better. And there won't be any problem flashing 4.2.2
You should install latest kies version
Sent from my GT-P3100 using xda premium
sukkukikku said:
You should install latest kies version
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
---------- Post added at 02:05 AM ---------- Previous post was at 02:01 AM ----------
shubham.butle said:
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
Click to expand...
Click to collapse
I update rom by cwm..
would you like to give me clear solution? i have same problem here with P3100, already tried many CWM but none of them fixed it, flashing directly through odin with this file (DBT-P3100XWDMI1-20140113101559) and still no luck. Any link to download correct CWM please... Thanks
Awesome post
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
ragujay said:
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
Click to expand...
Click to collapse
Hi! Do you still having the CWM and Odin 1.3?
Hi.. I was experiencing this problem. Then without even thinking deeply, I try google any solution regarding this matter without referring to this thread first. I found this guys solution as he said it is for all samsung model.
https://www.youtube.com/watch?v=Jfgq6bYfKLg
After done flashing, my tab giving a samsung logo and went off until now. I was unable to enter the recovery and download mode. I try to connect the tab with PC but it kept reconnecting repetitively although universal samsung usb driver has been installed. Any idea how to solve this?
I managed to pull some files together including the .pit file from my now working tablet and make a fully working 4 file firmware and combo (all in one) firmware that CAN be flashed with Odin. I have tested it on my device and it does work. Since I know people are searching EVERYWHERE for this, I have released a download link for these files below.
Please, feel free to re-post this anywhere, just be sure to credit me.
DISCLAIMER (Obviously): I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE AFTER FLASHING. KEEP IN MIND THAT ANYTHING CAN GO WRONG, EVEN IF YOU'RE FLASHING FIRMWARE THAT IS MADE FOR YOUR DEVICE. THE FIRMWARE AVAILABLE BELOW HAS NOT BEEN MODIFIED, ENGINEERED, OR EDITED IN ANY WAY TO CHANGE THE FUNCTIONALITY OF YOUR DEVICE. IF YOUR DEVICE BRICKS AFTER FLASHING, IT'S ALL ON YOU.
Flashing instructions:
But first, the requirements:
1) SM-T337A, Obviously, but seriously, I can't stress how important it is that you check that your model number is matched with the model number in this thread before flashing anything.
2) A Windows pc (NOT A VIRTUAL MACHINE! Using a VM to flash your device has a high chance to hard-brick your tab, and make sure your computer is running Windows XP or newer.)
3) Your device's USB transfer/charging cable
4) A Brain (Obviously)
Now then, the actual steps (4 File Firmware):
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) If you wish to wipe your data and start from scratch, click on the 'PIT' tab and select the .pit file in the extracted folder. Then, click the 'OPTIONS' tab and select 'Re-Partition' and 'NAND Erase All'.
7) Insert the firmware files into Odin. Within Odin, for instance, Click on the 'BL' button, which is where the bootloader file goes. Select the extracted package that has 'BL' at the beginning, and vice versa.
Example:
BL: *directory*/BL_T337AUCU2BOH4...
AP: *directory*/AP_T337AUCU2BOH4...
CP: *directory*/CP_T337AUCU2BOH4...
CSC: *directory*/CSC_ ATT_T337AUCU2BOH4...
8) Once done, verify that you have correctly done all the steps above, click 'Start' in Odin and wait for Odin to output a "PASS" message before unplugging anything.
9) If you wish to flash the firmware, but keep your data, make sure that there is no .pit file in Odin, make sure that 'Re-Partition' and 'NAND Erase All' are unchecked, and make sure that there is no file inserted under the 'CSC' row.
Tutorial (Combo Firmware)
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) Within Odin, Select 'AP' and browse to the directory where you extracted the firmware, and select the .tar package in the directory. There should be nothing else under the other tabs, only 'AP' should have a firmware package in it.
7) Flashing this package (unless you perform the "Developers Tip" at the end of this thread) will wipe all of your data, so be sure that the proper .pit file that came with the firmware package is selected under the 'PIT' tab in Odin and make sure that 'Re-Partition' and 'NAND Erase All' are checked in Odin to ensure a complete wipe of all personal data on the device. If you perform the developers tip at the end of the thread, simply insert the new package you created under 'AP', make sure there is no .pit file under the PIT slot, and make sure that 'Re-Partition' and 'NAND Erase All' are unchecked in Odin.
8) Once done, verify that everything is set and ready-to-go, then click 'Start' and wait for Odin to output a "PASS" message before unplugging anything.
9) Enjoy!
WARNING: If you are seeing sites that charge you money for the files, DO NOT BUY IT. They are scams and I HIGHLY SUGGEST AVOIDING THESE SITES. I didn't have to buy anything. If you do buy the firmware from these scam sites, and your device becomes bricked or messed up in some way, don't say I didn't warn you.
4 File Firmware Download: https://mega.nz/#!n8Q3VIIS!OComhygeI5SL5R6n0EXEfiYMBtVn_aOAIcUuLgmYs-k
Combo Firmware Download: https://mega.nz/#!69oEwbBR!vBtHQnrdwAfdZB3iPeGb99Yp7W79efTQr7t6FZXrzIo
Odin 3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the link doesn't work or goes down for some reason or if you were confused by my instructions in any way, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract your firmware package (extract everything into a separate folder for combo firmware, extract the CSC package for 4 file downloads) and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop. If you wish to do this on an older device and the cache file doesn't have the .ext4 extension at the end, don't worry, it'll work the same way.
Now that you have the firmware, WHY NOT ROOT IT? Check out my thread on how to do so here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
dkmac said:
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'll be honest and say its not easy. Making this firmware took me about 3 months. OTA update files are very different from actual Odin firmware files. If you want to extract the files from an OTA update, I just used 7Zip and went from there.
Lollipop 5.1.1 Root for SM-T337A
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Your welcome bro, happy to help! I have actually rooted my tab with SuperSU, fully working. The only thing is its temporary, and I avoid rebooting or shutting the device down at all because it's a system-less SuperSU (meaning temporary). I'll make a thread on how to achieve root on this tab later tomorrow when I get home from work, unless someone replies to this before I do (It's late where I'm at).
Cheers!
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Just made a thread for it here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Sent from my SAMSUNG-SM-T337A using Tapatalk
darkcrazy75 said:
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
Click to expand...
Click to collapse
Sorry for the late responce, my internet has been down for a while now (2 weeks). I'll watch the video later today and edit this post with an explainatio n.
_SAM11_ said:
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Click to expand...
Click to collapse
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
KingOfTheNet said:
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
Click to expand...
Click to collapse
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
KingOfTheNet said:
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
Click to expand...
Click to collapse
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
This might take me a while, I can't edit the thread (kinda odd). I've gotta talk to admin about it but I'll try to get instructions up for ya asap (unless someone replies to you with instructions before I do).
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
KingOfTheNet said:
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
Click to expand...
Click to collapse
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Guys no lollipop update for tab4 t230 ?
tab4map4 said:
Guys no lollipop update for tab4 t230 ?
Click to expand...
Click to collapse
No, this thread is for the Tab 4 8.0 AT&T. Please make sure you consult the relevant forums for your device model as doing anything meant to be done on different devices can be catastrophic.
Cheers!
_SAM11_ said:
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
Finally got the instructions up. You can check the very beginning of the thread for instructions on flashing. Just remember, I will not be held responsible if your device is bricked after the matter.
Cheers!