Related
After bdemartino wrote his AWESOME thread for the Mesmerize it seemed only fitting that the Showcase get their very own... And since his Thread was Flawless, with his permission I'm mostly copy/pasting word for word. as I am copying most of this from elijablake . . . so thanks this thread needs some editing, and I will be working on that in the future . . . . specifically the CWM / ROM manager which will not work. I could use some assistance in rewriting that part. TY!
BEST. ADVICE. EVER. #samsung-mesmerize on irc.freenode.net
<3<3<3<3<3
Also, read the Glossary for definitions and such. I was not the sharpest tool in the shed and it took me a while to find this . . .
Disclaimers
CSOUTH IS RELEASEING 2.2 UPDATE THIS WEEK (6/26). You may just want to wait for that to be released. This thread will be updated when the release occurs as how to flash recovery that you can flash roms with etc.
Keep in mind there are many variations to each step, this is what worked for me the easiest. READ ALOT BEFORE PROCEEDING WITH ANYTHING!!
There is always the disclaimer that attempting any of this can and will make your phone dysfunctional and or possibly bricked beyond repair (but most likely just dysfunctional which is a pain in the arse to deal with) if you do not follow steps completely (and of a trustworthy source such as xda - ehm and in the appropriate forum ).
Steps to get to 2.2 (EB11) on your phone:
**Please note that the links were removed by CSouth for copyright (COPY WRONG *****ES) reasons. So if you can find the files somewhere (ahem . . . ) then you can follow these steps. THIS GUIDE IS PURELY FOR EDUCATIONAL VALUE, I DO NOT ADVOCATE BREAKING COPYRIGHT LAW.
I highly recommend using Heimdall rather than Odin. Don't ask me why . . . maybe because it has a command line utility and it is cross platform. So my instructions will be for using Heimdall.
After you have the downloaded files (from wherever you might have gotten them, you bad bad person) unzip and look for the following files:
-factoryfs.rfs
-modem.bin
-recovery.bin
-zImage
1) Put your phone in download mode by powering down your device, removing the battery, connecting the USB to your computer, and holding the volume down button. It shouldn't take long. You should see a little Android with a shovel.
2) In Heimdall, if using the GUI, put all of the files in their obviously appropriate spots. Don't worry if not everything is filled, just use the files that you have. (You should be using the repartition with the .pit file, the zImage with the Kernel, the recovery, and the modem)
If using the command line utility, cd to the directory where you unzipped the files and
Code:
heimdall flash --repartition --pit atlas_v2.2.1.pit --factoryfs factoryfs.rfs --kernel zImage --modem modem.bin --recovery recovery.bin
Wait for the process to finish, your phone will reboot at the end.
3. That is all, now your phone is updated to 2.2.1. Put the battery back in and boot your new shiny toy!
DO NOT DISCONNECT USB DURING THIS PROCESS AS IT COULD BE POTENTIALLY DISASTROUS!!! DON'T EVEN TOUCH IT AS I HAVE FOUND THE USB CONNECTION TO BE A BIT FLAKY!
Also, it is ok if it takes your phone what seems like forever to boot. This happens whenever you install a new kernel, just be patient.
If you have gotten the most updated batch of files, you should have the proper recovery to begin flashing. If not, well seek help . . . You should have RED RECOVERY!
See here for more information about CWM or go on irc.
To access recovery, you can use the three finger method. (Hold down the volume up and down keys and the power button all at the same time when you're turning your phone on) Once you see the Samsung splash screen you can remove your finger from the power button, but keep holding down both volume keys.
You should then go here to check out themes and mods.
Steps For Rooting either 2.1 or 2.2.1
Basically all this means is gaining the ability to give programs/apps and yourself SuperUser access (equivalent of being admin in windows) and also the ability to flash roms via recovery, detailed below.
**NOTE: most custom roms come rooted, so if you are installing a custom rom in 2.2.1, you most likely don't have to go through these steps. Just flash to the ROM you want . . . ***
The easiest way to root is through the z4root.apk. (an application that will run right on your phone)
Download Here
After download, put z4root.apk on your SD card root directory
Then make sure in Settings->Applications that the "Unknown sources" box is checked.
If you don't have a file manager, download a free one from the market, using the file manager navigate to the z4root.apk and select to install it. Note: If you need help at this step, no offense I would suggest getting someone with more experience to help you continue on. I'm serious here
Reboot your phone
After it boots, open the z4root app and press root. At this point it is going to hang, give it 2 minutes and pull the battery. Count to 10, put it back in and turn it on. - This is normal
After your phone boots open z4root again and click root, this time it will run no problems and phone will reboot.
NOTE**IF YOU HAVE PROBLEMS WITH z4root: "give Super One Click a try. It's a package you have to download to your computer, but you get to see more of what's actually going on so you know where it's at in the process. I have only used up to version 1.5.5, and I know that version is very capable for the Showcase. It is located here."-This Information provided by phidelt82**
Once you are rooted (you will see the superuser icon in your apps, it will show apps you've given that permission to... eventually) you will need to make sure you have a file manager that can request root permissions (read/write) before you will be able to complete the next step. Search the market for "root file manager" and pick one to download and install.
I use Root Explorer
It's a few bucks, but there's hardly a day that goes by when I don't use it.. (Well worth the money)
THE ECLAIR SECTION IS REMOVED AS CSOUTH IS RELEASING UPDATE THIS WEEK (6/27)
Hehmmmm....
nice write-up!
Upgraded the Showcase to 2.2.1 build EE25 with Samsung Kies this morning. Also had no issue rooting with superoneclick.
cpflow said:
Upgraded the Showcase to 2.2.1 build EE25 with Samsung Kies this morning. Also had no issue rooting with superoneclick.
Click to expand...
Click to collapse
Kies has 2.3 out now =)
Kies Mini have 2.3.5 out now for generic cdma showcase.
Sent from my SCH-I500 using Tapatalk
*Edit*
It seem everyone forgot about the Samsung Showcase Galaxy S Generic CDMA.
I managed to Root it flash CWMR and flash TSM TW 4.0 ROM. but then try to go back to stock and lost 3G. So I returned it and get a new one. No more mods for me I'm done no one cares about Generic CDMA.
Can someone provide directions to install a custom rom for a Showcase running stock 2.3.4? I don't have root. I'd really appreciate any help!
i tried to unbrick this using
http://forum.xda-developers.com/showthread.php?t=1123429
but now that i followed the instructions all i have is a black screen nothing even pops up. can anyone help me fix this im freaking out right now.
Can you give us more info? Were you rooted? Did you screw up flashing a rom or something? A few weeks ago I had to unroot my TF so I could RMA it and I found that a lot of the posts on here were either outdated or linked to an outside source, which was outdated.
When I got my TF back I decided to re-root it and it was a lot more painful than when I first did it about a month earlier, IDK if I had my images swapped and I was flashing the wrong files or what but it took freaking forever.
I'll upload a stock 3.2 image for you that has to be flashed with nvflash and it will unbrick your tablet. If you want to be rooted use Roach's nvflashable version of Prime instead and that should also fix your TF.
i have a b60 model i was not rooted i tried but failed because i couldnt get superuser to work. i was trying to flash back to stock because i could not get any updates so i figured if i go back to a clean 3.2 i would be ok. then i tried putting it back to stock using one of the post here. then when i tried everything went smooth but then i tried turning my tf101 on and it would not turn on. could you help me fix this? ill be very grateful to you give you a thanks and when i get a job donate to you if we get this working. thank you
edit: i still can get into nvflash but thats about it. idk what to do now
Installing ADB
1. Under the Choose packages to install dialog in the Android SDK choose Android SDK Platform Tools (you don't need all the other crap) and hit install.
2. Right click on My Computer and then select Properties and then Advanced System Settings, then click Environmental Variables and add the location of the folder that contains ADB to the PATH variable in the second pane entitled System Variables (ex: [path that the main folder is in]\android-sdk_r12-windows\android-sdk-windows\platform-tools)
3. Reboot.
4. You should now be able to access ADB via the command prompt (run --> cmd) simply by typing adb
Flashing Back to Stock 3.2
1. Download it from here and extract the archive with winrar, replace the nvflash linux binary with the windows equivalent, open up download.sh and remove the ./ from the beginning of nvflash and also the first line of the file
2. Change the file extension of download.sh to download.bat
3. Right click it and click run as administrator and then let it do it's work and you should be on a fresh install of Honeycomb 3.2 in no time!
My infuse when turned on goes to a screen that looks like phone ! pc with the message "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". So this happens even when I try and go to download mode or recovery mode. Basically as soon as I hit the power button. I'm really freaking out. It was rooted and I was doing following this link: http://forum.xda-developers.com/showthread.php?t=1613523
Then the problems started when my computer didn't recognize the phone in download mode. and then it was recognized so I started the Odin flash. Then it froze at cache.rts (I believe that's what Odin said, I can't get to it anymore)...So I uninstalled and reinstalled the drivers and did it again and it got to factoryfs.rfs before it froze there for a really long time. So I unplugged it and tried to do GTG Ultimate Unbrick...but I can't get the .zip file to open. My computer keeps telling me "Can Not Open ____ as archive". I re-downloaded it and same result. Is there anything I can do to save my phone? I'm a real idiot and this kind of stuff always happens to me no matter how much I read up on something and make sure I'm doing it right. I would really appreciate a little help though, thanks!
I actually got it downloaded and followed Rammstein874's video on youtube on how to do it and I am once again stuck on factoryfs.rfs :-(
What can I do at this point? It is still stuck at the Phone-!-PC screen when I try to go to download mode. Please help, I'm starting to get pretty worried about this...
When your screen is phone!computer, that's an alternative version of download mode. You can either use ODIN or heimdall back to stock. Just plug it in via usb, allow odin/heimdall to recognize it and start flashing.
This is correct....if you see those pic on your phone that is a form of download...i would run the one click method...
sfgiants2010 said:
Rammstein874's video on youtube
Click to expand...
Click to collapse
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
jscott30 said:
Can you PM me the link to Rammstein874's video? I didn't realize he still had this, and I've since updated my packages and how-to.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Lemma know if that's the one..pm sent...
Sorry I was at work all day.
This is the video link I used: http://www.youtube.com/watch?v=y1HgcZrYR_4
I am also looking at the following one-click method posts:
- http://forum.xda-developers.com/showthread.php?t=1331381
- http://forum.xda-developers.com/showthread.php?t=1524081
* I used the above link (or tried) and it didn't seem to work either. I downloaded Heimdall Suite for Windows 64bit and then installed the drivers and plugged in my phone in download mode. But then I was unable to get it started...I used the "Stock_SGH_I997_UCLB3_Repartition-One-Click.jar" file I found on mediafire (because all of these posts link to mediaupload which is no longer working). Anyway, so I tried to run Heimdall-frontend.exe on windows and once it opened up I connected my phone (nothing turns green like the post says) and hit browse. I chose the jar file aforementioned and it said "tar header contained invalid file size."
So if someone could point me toward a more up to date thread if I'm using the wrong one and kind of explain to me how to get around the other problem I'm having with the jar file then I would be forever appreciative
Not sure what you did...not saying you did something wrong but here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
why are you using these other programs...idk,
I just click on the one click file it an executable design to open and run itself...you say attach the jar file...why the suite version of heimdall...?
did you download the links i provided and just use those...?
sfgiants2010 said:
Right, I did those things from that link itself. I think the problem is actually with how I'm using Heimdall. I downloaded the suite version from here: http://www.glassechidna.com.au/products/heimdall/
I also downloaded Microsoft Visual Studio C++. So I feel like it should be working...but the problem comes when I hit browse to attach the jar file you linked to. It says the "tar header file size was incorrect"...so am I doing something wrong in the way that I'm attaching the jar file to go back to stock? Could you or someone else please confirm that process and/or check the jar file for me to make sure it's still up-to-date? Sorry for the trouble, I'm just not sure what I can do at this point if I can't get Heimdall working. I can't flash after I attach the jar file with the error message either, it doesn't recognize my phone when it is attached in download mode (which is coming up just fine now without the phone!pc thing for some reason).
Click to expand...
Click to collapse
Is your phone still stuck on the phone-!-pc ?
did you read the last post he had regarding the actual heimdall program suite...
not sure what he had going on...I believe he has download mode capability...
thx ''Goshujin-sama'' qkster
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
qkster said:
Yeah..that's where I wasn't sure what sf was doing.
the jar file is self executable. When you click on the jar file, there is a load up delay.
Then should be be ready.
You then hook up the phone.
I've not seen in tar header file size error.
Sf should not be trying to stick the 1-click file into heimdall front-end.
It's a single self executable jar file..the is no other dependencies...the only other situation I can think of is maybe putting the 1-click jar file onto a different PC and try running it there.
Click to expand...
Click to collapse
that's when I started to question him on these other programs...due to the one clicker is self sustained as a exe...idk...but believe he log off...i will monitor and holler at you if required thank you...
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
It should of rebooted it self the phone...
Btw you are not wasting my time...wife is watching cup cake wars...so ....rather help you...lol
sfgiants2010 said:
Oh man I had no idea...I was so mixed up by trying to educate myself with so many posts about using Heimdall. I thought I had to download Heimdall separately and attach the jar file or something. But okay so I ran the one-click. It failed the first time (expected) and then I checked the flash bootloaders box and hit flash again. Then it stopped at installing drivers and prompted me to install the drivers on the following prompt. So I did that and then it said installed drivers successfully and I hit close. Then nothing happens. So what do I do at this point? I'm probably being an idiot again but I really appreciate you guys trying to help me out. And I hope you realize I'm trying my best to not waste anyone's time.
The device status was a green Connected before I started by the way. At this point what I do? It seems to just break at the installing drivers part...?
Click to expand...
Click to collapse
Once the connected bar is on, you click flash. It should complete it's routine. the phone reboots. you should click on the boot loader box. you disconnect. let it finish. set it back into donwload mode and flash again.
you can try different usb port or data cord or different pc
Plus you have my master...qkster here...cuz you lost me on the programs you were using...so i called in the jedia master!
As long as your screen has that Phone! Computer sign, it's not bricked yet. I recommend you to search some how to videos online so you can see the exact instructions on how to use heimdall because it's that easy. If possible maybe one of our awesome contributors can make a how to video for heimdall.
I believe he is tracking now qkster is providing....thx
I am trying to unbrick my phone. When I go to import stock.jar file I get the error "Tar Header contained invalid file size" Can anyone tell me what to do?
Not sure what you are saying on importing...
Might i suggest reread the op...follow these directions...
http://forum.xda-developers.com/showthread.php?t=1524081
I see you reading the odin thread...just make sure you follow the op...
You can youtube it for Samsung infuse on odin or heimdall...good vid..
bigjoe2675 said:
Not sure what you are saying on importing...
Might i suggest reread the op...follow these directions...
http://forum.xda-developers.com/showthread.php?t=1524081
I see you reading the odin thread...just make sure you follow the op...
You can youtube it for Samsung infuse on odin or heimdall...good vid..
Click to expand...
Click to collapse
I followed the OP, under the "Load Package" tab I click browse like the instructions say, and then select the [ROM] [2.3.6] Heimdall One-click Back-To-Stock UCLB3 and thats when I get the error
this is how i read it, did i give you the wrong link?
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: Green"]CONNECTED[/COLOR][/B][/SIZE]. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
bigjoe2675 said:
this is how i read it, did i give you the wrong link?
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: Green"]CONNECTED[/COLOR][/B][/SIZE]. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
Click to expand...
Click to collapse
Is there a step between 1 and 2 though? As far as loading the .jar file before you flash?
Gimme a few driving home right now...k
Ok, lets readdress all this...you can get download mode...right? see picture of download mod...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
ok, and let us know how it all worked out...
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Ya thats what I did and still getting the error. It doesnt like that file I try to open. Maybe its me.
I ended up getting it to work through Odin.
Thanks for all your help though!
lazerus06 said:
Ya thats what I did and still getting the error. It doesnt like that file I try to open. Maybe its me. I ended up getting it to work through Odin.
Thanks for all your help though!
Click to expand...
Click to collapse
hey great if Odin works...work bro...bottom-line is getting your phone up and running again...
let me know if you need any more info...kk
lazerus06 said:
Ya thats what I did and still getting the error. It doesnt like that file I try to open. Maybe its me.
I ended up getting it to work through Odin.
Thanks for all your help though!
Click to expand...
Click to collapse
laz, you tried to load the 1 click into heimdall frontend.
You should have just click...run the jar file. Wait a few minutes and it should be ready. The jar is self executable
@qkster bro i really didnt get what u said...'click on oneclick file,wait for a while...jar file is self executable'
do you want me to extract the oneclick file? if yes,what i am supposed to do with its extracted files?
if not then what?
i am getting following list for extraction...
shri003 said:
@qkster bro i really didnt get what u said...'click on oneclick file,wait for a while...jar file is self executable'
do you want me to extract the oneclick file? if yes,what i am supposed to do with its extracted files?
if not then what?
i am getting following list for extraction...
Click to expand...
Click to collapse
the heimdall-1-click is meant to run as is.
double click in windows to run
no extraction
Java has to be installed.
Planning my escape!
qkster said:
the heimdall-1-click is meant to run as is.
double click in windows to run
no extraction
Click to expand...
Click to collapse
as you are instructing me to open the stock .jar file with jave i tried to open with java a black command window popped up and then disappeared ...after thet nothing happened... what am i supposed to do now?
Make sure you have java installed, then look for the file and make sure it is associated with java. If not, right click, open with... and select Java.
Sent from my sweet & buttery Infuse
dead infuse
andros11 said:
Make sure you have java installed, then look for the file and make sure it is associated with java. If not, right click, open with... and select Java.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
yeah i have intalled the latest java and did ...'open with... java'....got same result...black command window popped up and then disappeared!
shri003 said:
yeah i have intalled the latest java and did ...'open with... java'....got same result...black command window popped up and then disappeared!
Click to expand...
Click to collapse
I believe this is supposed to be executed as administrator per qkster's instructions.
The normal way to do that is to right-click and select run-as-administrator
And if that doesn't work, there is a more detailed method to run java jar files as administrator (using elevated command prompt) discussed here:
http://forum.xda-developers.com/sho...culties+in+run-as-administrator+#post30585561
shri003 said:
yeah i have intalled the latest java and did ...'open with... java'....got same result...black command window popped up and then disappeared!
Click to expand...
Click to collapse
Once again this sounds like someone in the frontend of Heimdall.
Just save the .jar file to the desktop.
Make sure your phone is in download mode.
Double click the .jar file from the desktop (not from Heimdall suite), wait for the file to load.
Another screen will open with a long flashbar on the bottom, click it.
Phone will now be flashing and will disconnect when done.
Solved: stuck at "Firmware upgrade encountered an issue. Please select recovery mode
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
Hi. Tried your method and it worked on windows. I tried 2 different ODIN softwares before it worked. Thanks for your help and information.
can't enter download mode
thanks for the notes. i tried to update to 4.2.2 from 4.1.2. the upgrade was unsucessfull. now i did whatever u have told. now i got the recovery but i can't enter download mode. now the tab 2(p3100) is just restarting. please help me as soon as possible
JLloydMedia said:
So you are stuck on the dreaded " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen and there is nothing you can do to get your phone to start normally or even get to the download screen?
Fret not lads & ladies, I've already gone thru the pain and suffering and have come out new man, and I'll tell you how I did it. Also im starting all the way at linux/mac so everyones included.
First things first, you are going to have to get your computer ready with the right software for it to work.
You will need to make sure you get an original stock rom, make sure your source forwhere you download it is credible, this was my first mistake and why evidently I got myself into this mess.
I'm sure other roms might work that are modified for your device, but I suggest stock, and starting fresh just to make sure everything is up and running.
I am not responsible for your device, it may get bricked if done wrong.
Linux & Mac users first.
1. You will need to downloadable a program called Hiemdall, its a program similar to Odin3 (windows program).
2. You will need to extract the stock rom you downloaded earlier, I suggest to a folder in your desktop, wd will call it "folder1".
3. Now open up Hiemdall in root, (sudo Hiemdall-frontend for terminal) and then make sure device is on and stuck on the " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen, plug it in, then press the utilities tab and detect. ($ Heimdall detect)(terminal users). Make sure you do all this fast because the tablets are kinda funny when they stay connected.
4. Now clickthe Utilities tab then the "save as..." button and save the destination for the .pit file in the same location as the extracted stock rom folder (folder1).
5. Next click the Flash tab, and click browse and locate your .pit file, the one you just downloaded. Next click add under Partition (files), and then change the partion name (On the left hand under patition details) to recovery and browse to the extracted folder (folder1) and click and add the recovery.img and press start.
Now if all went well your tablet will have restarted itself and you have seen the logo (Samsung). but the chances are it wont load past that screen, but thats ok because now you can get your device into download mode and re-flash the whole rom. Do this the same way you did the recovery.img, but make sure you add each new one to the correct name in the partitions details section.
Now if this didnt work, then dont worry you can still join the windows crew and do it hat way. Simple download a program called virtualbox and get a windows xp iso, thats up to you to figure out as I deal with open source only O.S
So aftr you do that just load up the virtualbox with windows xp and follow below. I found it a bit easier as well.
Windows users....
I found this way to be pretty simple and straight forward,
1. Download Odin 1.3 (1.85 wasn't working for me)
2. Download the clockworkrecoveryMod
3. Open up Odin and browse in the PDA section for the CWM you downloaded and add it, next plug in your device and the box should turn yellow on the top left.
4. Press start and let it finish and reboot your device and you should now be able to boot into CWM and re flash a rom, or if you were smart just restore from a previous backup and get all the apps and stuff back too.
I dont know why cwm worked but it did so no complaints, just make sure you go into cwm and backup your device and with titanium (google play app) before you start playing with the root.
I did this and it worked for me, so hopefully it did for you. Im sorry if it didnt but dont get down, j6st be patient and ask and someone will help.
The key is getting the recovery.img to flash on I believe and maybe the cwm has it built in the package, im sure someone can shed some light on it.
"Im tired, cranky and hungry, but I got my baby back, no not you hunny, my GT2...":beer:
Click to expand...
Click to collapse
pls help..
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
kies is not nesccearlly needed we need the usb drivers make sure you installed them and you are using stock samsung usb cable or else IT WON"T WORK !!!
shubham.butle said:
I m faceting same problem on my galaxy tab 2 7.1 gtp3100..but my tab is not detecting by odin ..n tell me is
kies are necessary or not? pls help me..
Click to expand...
Click to collapse
If you can reach to the CWM recovery mode: Download firmware in zip form, you can get it from the below link. if you have a zip file leave it.
After obtaining the firmware copy to your external sdcard using a card reader or any other method
In recovery mode select "Instal zip from sdcard" then select "choose zip from external sdcard" then select the copied firmware zip file from the list and wait for completion
After completion go back and select "wipe data/factory reset" and "wipe cache partition" reboot . it will take some time for reboot atleat 15min. it worked for me. hope it will work for you. good luck
http://forum.xda-developers.com/showthread.php?t=2054901
Thanx...
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
shubham.butle said:
thanx.. @Jeevan I flashed cwm successfully..(I don't know how..!)n in ur link there are many roms ,when this problem was created my os was ICS..now tell me if I flash 4.2.2 directly..then it will create problem or not..n in 4.2.2 there are two files so which will better..thanx once again u saved me!!pls reply
Click to expand...
Click to collapse
You can choose any of the roms, deodexed will be better. And there won't be any problem flashing 4.2.2
You should install latest kies version
Sent from my GT-P3100 using xda premium
sukkukikku said:
You should install latest kies version
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
---------- Post added at 02:05 AM ---------- Previous post was at 02:01 AM ----------
shubham.butle said:
Thanx yr..bt today I just install stock rom 4.2.2,so no problem just tell me these stock roms are exactly original or change some thing I mean in future updates can I use normal method ie directly
update from tab?
Click to expand...
Click to collapse
I update rom by cwm..
would you like to give me clear solution? i have same problem here with P3100, already tried many CWM but none of them fixed it, flashing directly through odin with this file (DBT-P3100XWDMI1-20140113101559) and still no luck. Any link to download correct CWM please... Thanks
Awesome post
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
ragujay said:
Dears
please follow blindly in this post,
because i have tried to install , 4.2.2 Bg to my samsung tab 2, got error firmware upgrade issue, and now i followed the steps here. got installed on 4..2.2
who would required , please go for XDA instruction
realy awesome, life saver, :good:
Click to expand...
Click to collapse
Hi! Do you still having the CWM and Odin 1.3?
Hi.. I was experiencing this problem. Then without even thinking deeply, I try google any solution regarding this matter without referring to this thread first. I found this guys solution as he said it is for all samsung model.
https://www.youtube.com/watch?v=Jfgq6bYfKLg
After done flashing, my tab giving a samsung logo and went off until now. I was unable to enter the recovery and download mode. I try to connect the tab with PC but it kept reconnecting repetitively although universal samsung usb driver has been installed. Any idea how to solve this?