Hello guys, I'm in trouble because my TCL s720 gets starting with logo "LEWA" forever...
This morning I was trying to change its ROM because it I had seen it as recommended to give the phone a solution for several problems with the official rom that comes in it originally.
I hadn't got install CWM, but yes twrp with mobile uncle tools. And on my first attempt in the restart from this tool to put LEWA, it doesn't works. And gets in logo forever...
Now I can't go to recovery again because key combination Power + Vol+ doesn't work.
Please help !!!!
mifeve said:
Hello guys, I'm in trouble because my TCL s720 gets starting with logo "LEWA" forever...
This morning I was trying to change its ROM because it I had seen it as recommended to give the phone a solution for several problems with the official rom that comes in it originally.
I hadn't got install CWM, but yes twrp with mobile uncle tools. And on my first attempt in the restart from this tool to put LEWA, it doesn't works. And gets in logo forever...
Now I can't go to recovery again because key combination Power + Vol+ doesn't work.
Please help !!!!
Click to expand...
Click to collapse
Nobody can help me??
mifeve said:
Hello guys, I'm in trouble because my TCL s720 gets starting with logo "LEWA" forever...
This morning I was trying to change its ROM because it I had seen it as recommended to give the phone a solution for several problems with the official rom that comes in it originally.
I hadn't got install CWM, but yes twrp with mobile uncle tools. And on my first attempt in the restart from this tool to put LEWA, it doesn't works. And gets in logo forever...
Now I can't go to recovery again because key combination Power + Vol+ doesn't work.
Please help !!!!
Click to expand...
Click to collapse
I have not seen such problem. But you can try using adb in the adb shell type
adb reboot recovery
May be this help you
Thank me if I seem helpful
---------- Post added at 04:58 PM ---------- Previous post was at 04:57 PM ----------
We are from developer community and this is in our dna to help others in problem
Sushant Rohan said:
I have not seen such problem. But you can try using adb in the adb shell type
adb reboot recovery
May be this help you
Thank me if I seem helpful
---------- Post added at 04:58 PM ---------- Previous post was at 04:57 PM ----------
We are from developer community and this is in our dna to help others in problem
Click to expand...
Click to collapse
Thanks Sushant, I've checked that solution before but the PC doesn't view the phone because it is starting...
Thank you. I am not sure whether this will work but try this.
Pull the battery and place it on its position. Now press the Power and Volume Up key simultaneously. There a menu will appear I am not getting the controls but I think Volume Up is the selection Volume Down is used to move the selection(but I am not sure about control) navigate to the recovery mode and hit the selection button (I am not sure what the selection is, but you will find it as soon as you get into advanced booting)
May be this helps, fingers crossed, praying for your device
---------- Post added at 06:21 PM ---------- Previous post was at 05:40 PM ----------
You can read my guide http://forum.xda-developers.com/showthread.php?t=3044221
May be it help you
Related
Hi all,
I have loaded the Oma JB v1.2.2 ROM onto my Cube U9GT2, and want to boot into CWM recovery mode so I can apply the required fix from the zipped file on my SD.
The ROM loaded on fine, and checked out ok, but the problem I have is not being able to load CWM after the update.
I have tried volume down on powering up, but all I get is a black screen (screen illuminated, but all black). From reading I thought all I needed to do was hold volume down while powering on, wait for some text to appear, then switch to volume up till loaded. Also, if I try to power up without using volume down I get the same illuminated but black screen, no booting up.
If I flash the Evolution ROM back on it works again no problem, but I would like to try the Oma JB v1.2.2.
Am I missing something obvious?
Any advice would be greatly appreciated.
Cheers
Hey,
Thanks for including all the necessary details.
To me it just seems like some sort of bug. I would recommend ditching the ROM itself. Obviously, it cannot access the CWM files but as to fixing it, I wouldn't know.
I can't say any more really as I have never experienced this.
Sorry about that.
Hello,
Funny !!! I have exactly the opposite problem ! I have also a window N90 tablet (U9GT2 clone). I have tried to install Oma JB v1.2.2 ROM onto my device. For me, I can't load android, I can only boot and the device crashes, on a screen (remember me windows). Impossible to turn on the device but I can access the CWM recovery mode and can apply the zip fix ! To enter the recovery mode I push volume down on powering on. The device is no more recognized by XP and RKandroid can not find the tablet !!!
Do you know if it is possible to install a new Rom from the CWM recovery mode ?
Thanks a lot your help
ck
spicysi said:
Hi all,
I have loaded the Oma JB v1.2.2 ROM onto my Cube U9GT2, and want to boot into CWM recovery mode so I can apply the required fix from the zipped file on my SD.
The ROM loaded on fine, and checked out ok, but the problem I have is not being able to load CWM after the update.
I have tried volume down on powering up, but all I get is a black screen (screen illuminated, but all black). From reading I thought all I needed to do was hold volume down while powering on, wait for some text to appear, then switch to volume up till loaded. Also, if I try to power up without using volume down I get the same illuminated but black screen, no booting up.
If I flash the Evolution ROM back on it works again no problem, but I would like to try the Oma JB v1.2.2.
Am I missing something obvious?
Any advice would be greatly appreciated.
Cheers
Click to expand...
Click to collapse
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
---------- Post added at 07:48 PM ---------- Previous post was at 07:40 PM ----------
ck32 said:
Hello,
Funny !!! I have exactly the opposite problem ! I have also a window N90 tablet (U9GT2 clone). I have tried to install Oma JB v1.2.2 ROM onto my device. For me, I can't load android, I can only boot and the device crashes, on a screen (remember me windows). Impossible to turn on the device but I can access the CWM recovery mode and can apply the zip fix ! To enter the recovery mode I push volume down on powering on. The device is no more recognized by XP and RKandroid can not find the tablet !!!
Do you know if it is possible to install a new Rom from the CWM recovery mode ?
Thanks a lot your help
ck
Click to expand...
Click to collapse
It's possible if you have backup of working ROM and can restore it, otherwise propably not.
---------- Post added at 07:52 PM ---------- Previous post was at 07:48 PM ----------
j0vi said:
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
---------- Post added at 07:48 PM ---------- Previous post was at 07:40 PM ----------
It's possible if you have backup of working ROM and can restore it, otherwise propably not.
Click to expand...
Click to collapse
To get to flashing mode in Windows
1. Shutdown your U9GT2
2. Press Volume down
3. While keeping Volume down pressed plug in USB cable (U9GT2 display stays blank. Do not press Power button)
4. Run RKAndroidTool.exe as Administrator
j0vi said:
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
I have the same problem, can't get it to boot neither CWM recovery.
Click to expand...
Click to collapse
Hello Guys,
since i saw a a bunch of posts with: "Help stucked on bootlogo" , "wiped OS", etc. ,
and i've done it by my selfe ^^ ,
I found the answer, so you need a working TWRP, and a SD-Card with a good /dload folder.
Go to the TWRP with power on key and at the same time vol + (up).
Now go to Reboot and Bootloader
now you flash the standard recovery.
Like you flashed the TWRP just with the restoration Recovery.img .
All you need is inside of this link provided by Hirs_E_Fruit from his Root Guide.
If you have finaly done flashing the stock recovery you can shutdown your phone and start it with power key + vol+ and vol-
all three at the same time for a solid amout of time idk about 8 sek or so i normaly release the power key after 5 seconds +-.
yea then you should see a blue circle a usb plug in middel of it and some chinese writing.
Hope this will help someone
Have Fun and Good Luck
Gadlion
not worked for me..
I can see blue circle... It will go till 90% but pausing...
in fastboot white screen It
still softbricked...
---------- Post added at 10:02 AM ---------- Previous post was at 09:50 AM ----------
How can I find and install TWRP while my phone is softbricked? Please provide some article
help????????
Gamexland said:
help????????
Click to expand...
Click to collapse
My phone logo is not only turned on DAV-701L
Hello guys!
Two days ago I was punched by a problem with my g955f: I bought it from my friend, I wiped it completely and I wanted to update it via Smart switch.I flashed the stock firmware with switch, the process was 100% succeded and then the phone tryed to boot up but everytime he pass the first screen with s8 plus galaxy text, he arrives at the second bootlogo with just the samsung text and then he restart itself continuously.
I flashed also a firmware with odin..I fully charged the phone and then tryed again with Smart Switch but the same problem still persist.I don't know what else I can do, I have no warranty because the back pannel is broken so what else I can do by myself? Anyone has been met with this strange problem?
Thank you guys !
You tried installing twrp with odin
---------- Post added at 05:21 PM ---------- Previous post was at 05:13 PM ----------
However there are all the directions on YouTube, try to see that you find, I also had this problem but I only tried with Odin. You have to download the right firmware for both the model and the nation, following the directions with Odin you should succeed.
Hello, thank you for your reply !
I already tried with the right firmware by searching it after csc and pda, I tried with anything else, I tried with smart switch but everytime the flashing process ends up successfull but the phone is continuously restarting, not even a first boot..
hello
is it fully charged?
Hello,
Yes it is fully charged and he keep restarting until he drains the entire battery
Have you tried installing twrp with odin? Or is twrp already installed?
I tried to install twrp and then flash a custom rom.Everything went succesfully(the flash process) but when the phone tried to boot up for the first time it went in the infinitly restart..
I mention that I choosed the corect twrp for my g955f.
There is only one way to start in twrp. Hold down the volume button - and power, the screen shuts off for 2 or 3 seconds, then you have to press volume + bixby and power at the same time until twrp appears. Then install it as by procedure. I did this and it works
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
You must be fast to press before it comes back on
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
There is only one way to start in twrp. Hold down the volume button - and power, the screen shuts off for 2 or 3 seconds, within that 2 or 3 seconds you have to press + bixby + power at the same time until the twrp is displayed. Then install it as per procedure. I did this and it works
---------- Post added at 01:22 PM ---------- Previous post was at 01:20 PM ----------
There is only one way to start in twrp. Hold down the volume button - and power, the screen shuts off for 2 or 3 seconds, within that 2 or 3 seconds you have to press + bixby end power at the same time until the twrp is displayed. Then install it as per procedure. I did this and it works
---------- Post added at 01:25 PM ---------- Previous post was at 01:22 PM ----------
There is only one way to start in twrp. Hold down the volume button - and power, the screen shuts off for 2 or 3 seconds, within that 2 or 3 seconds you have to press + bixby and power at the same time until the twrp is displayed. Then install it as per procedure. I did this and it works
zuzulic said:
I tried to install twrp and then flash a custom rom.Everything went succesfully(the flash process) but when the phone tried to boot up for the first time it went in the infinitly restart..
I mention that I choosed the corect twrp for my g955f.
Click to expand...
Click to collapse
if you have no guarantee...
you can try a combination file and see if it can boot
just ask google for one for g955f
I tried with the combination file one day ago..but I ended up into a screen like "KERNEL PANIC MODE" .He is entering in this screen when he's trying to boot up.
HELP HELP
hello, I saw your post on the problem that you had with your galaxy s8 after flashing it, I had the same problem and I need a solution if you have found on plaise help me
at the beginning I had a problem with the bootload after having made the last update, my phone reboot constantly (bootloops), then I flashed it with Odin, and I get another problem, after the flash the systems update stops at 32% ===== erasing then it restarts again, I even tried the PIT flash method it does not work
i use magisk module and ,y phone cant boot normally. bootloop on t-mobile screen. how i can enter twrp?
You enter Twrp the same way you enter the stock recovery. With phone off press and hold the power and volume down button. As soon as the first screen pops up (i believe its the lg logo) continue holding volume down but quickly release power button and then repress and hold it down again. Then follow the prompts click yes to wipe phone, instead of wiping the phone it'll put you into TWRP.
---------- Post added at 10:13 AM ---------- Previous post was at 10:09 AM ----------
Some Magisk modules are only for certain phones or OS. I had the same problem after installing a module that was supposed to help the gpu. The dev didnt say it was for a specific phone or OS, but i assume that it was. Always make sure to read the notes of the module.
can someone help me, please
I tried to flash rom but it is stuck on this screen.
If your phone has a non-working home button which is pretty important for everything, why did you try to mess with the software...
You can't do anything but fixing the home button.
AkinoKimeo said:
can someone help me, please
I tried to flash rom but it is stuck on this screen.
Click to expand...
Click to collapse
Is this in the boot logo, or ROM itself?
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
forumber2 said:
If your phone has a non-working home button which is pretty important for everything, why did you try to mess with the software...
You can't do anything but fixing the home button.
Click to expand...
Click to collapse
He could in theory be using software keys
yuimhc said:
Is this in the boot logo, or ROM itself?
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
He could in theory be using software keys
Click to expand...
Click to collapse
It is the rom that's not compatible with the phone
its stuck on the boot logo
A usb jig might get it into download mode.
For TWRP you might be able to reboot directly into the recovery but it requires booting.