Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
----------------------------------------------------------
after fast reboot i disconect device to go to recovery in cwm, but i shouldnt do that and i should waited for violet led and continue that,so my xperia miro st23i is now dead, is there any help with flashtool or similar things to revoke my phone, or i should rma it ? thank you very much ((((
Try repair using Pc Companion.
If dont work use flashtool,
Download and flash a firmware .ftf for Xperia st23.
This is a french tutorial:
http://www.phonandroid.com/forum/xperia-miro-installer-un-firmware-kernel-officiel-t30288.html
Sent from my ST25i using xda app-developers app
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
keewee23 said:
in device manager it says semc flash device, seus update says hone has modified software and cannot be updated, flashtool 0.9.8 see device and it says device connected in flash mode, but when i click on flash it says error preparing files, and i did download ST23i_4_0_4_xperia.ftf, that its official firmware,. help
Click to expand...
Click to collapse
Download again the ftf. Follow this tutorial
http://translate.google.be/translat...aller-un-firmware-kernel-officiel-t30288.html
vol up gives adb mode, vol down gives flash mode, tryed flashboot boot boot.img, then flash reboot, nothing, tryed flashtool 0.9.9m stuck on reading device information, flashtool 0.6.8.0, says unpluged the device press and hold back button, it's xperia miro, back button is on touchscreen, help
SUCCESSFULLY FLASHED with flashtool by tutorial from that french forum, thank you, BUT, when i turn on phone it wont start green led blink once and nothing, i dont have locked bootloader maybe is that a problem?
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Sent from my ST25i using xda app-developers app
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
did you use flashtool for reviving your phone???is it your phone is miro????please help me...my phone is dead now and i cant resurrect it...please help me...
---------- Post added at 03:48 AM ---------- Previous post was at 03:15 AM ----------
keewee23 said:
PHONE REVIVED FROM THE DEAD :laugh:, THANK YOU, METHOD 2 from that french forum SAVED MY PHONE , THANK YOU
Click to expand...
Click to collapse
i performed the method 2 from flasher official kernel.....you did perform that to revive your miro right???the problem is...i'm stucked in "reading device information" thing....did you also experienced it???should i be worrying about it??or is it normal.......any help please????please......i'm begging you and i'm stuck in this problem for a couple of days....any help and reply will be a great thing to me......
How to Fix Dead Miro
I was Flash Rom my Miro and i got dead i downloaded flash 0.8.0 and 0.8.6 but when i connect my phone it show green light but its doesn't show in flash tool show some error and closed plz help which version of flash you used . i really need help :crying:
I need your great help.
My Xperia E3 (D2203) always stuck on Sony logo and can't power off after below step.
1. Upgrage to Kikat 4.4.4 --- OK
2. Unlock bootloader --- OK
3. Flash Kernel 4.4.2 --- OK
4. Open CWM and flash SuperSU --- OK
5. I choose the wrong instruction, Reboot to system. --- Stuck on Sony logo.
I have tried Sony PC Companion. It can detect my phone but it identify memory isn't enough after I excute update.
But I can't find any big files to delete via PC companion.
I also try flashtool to flash it again.
Flashtool can detect my phone but I don't know how to switch to flash mode.
I press volume - and plug USB cable to PC but flashtool don't work.
Please kindly help me to solve this problem.
Thanks.
Same problem exactly same problem
:crying::crying: please help me
Chevy1216 said:
I need your great help.
My Xperia E3 (D2203) always stuck on Sony logo and can't power off after below step.
1. Upgrage to Kikat 4.4.4 --- OK
2. Unlock bootloader --- OK
3. Flash Kernel 4.4.2 --- OK
4. Open CWM and flash SuperSU --- OK
5. I choose the wrong instruction, Reboot to system. --- Stuck on Sony logo.
I have tried Sony PC Companion. It can detect my phone but it identify memory isn't enough after I excute update.
But I can't find any big files to delete via PC companion.
I also try flashtool to flash it again.
Flashtool can detect my phone but I don't know how to switch to flash mode.
I press volume - and plug USB cable to PC but flashtool don't work.
Please kindly help me to solve this problem.
Thanks.
Click to expand...
Click to collapse
cherrywtz said:
:crying::crying: please help me
Click to expand...
Click to collapse
This problem has been solved.
Thanks for Vinay's help.
Hi Cherry.
Please follow Vinay's instruction as followings.
Open back of phone near sim card thare is small hole and off written on it.
Use a pen to press button inside hole. Your device will turn off.
Now connect usb press vol down.
Device Connected in FlashMode.
Now you can follow my guide to root after flashing cwm and power off.
(flash stock kernel from ftf of 4.4.4 kitkat)
(firmware 18.5.C.0.19 is 4.4.4 kitkat)
thanks
will try now
Chevy1216 said:
This problem has been solved.
Thanks for Vinay's help.
Hi Cherry.
Please follow Vinay's instruction as followings.
Open back of phone near sim card thare is small hole and off written on it.
Use a pen to press button inside hole. Your device will turn off.
Now connect usb press vol down.
Device Connected in FlashMode.
Now you can follow my guide to root after flashing cwm and power off.
(flash stock kernel from ftf of 4.4.4 kitkat)
(firmware 18.5.C.0.19 is 4.4.4 kitkat)
Click to expand...
Click to collapse
Hi
I have the same problem and allot of frustration.....
Where do I find?:
"Now you can follow my guide to root after flashing cwm and power off."
Best regards
/Lazarov
MrLazarov said:
Hi
I have the same problem and allot of frustration.....
Where do I find?:
"Now you can follow my guide to root after flashing cwm and power off."
Best regards
/Lazarov
Click to expand...
Click to collapse
guide is updated now no one get this problem any more.
they are saying to follow this guide
http://forum.xda-developers.com/xperia-e3/general/simplified-guide-to-root-sony-xperia-e3-t3012248
please can anyone help me i am not able to start my xperia C after i did the cwm install which was followed by the step of this site
can tell me how to again start
it will be also okay if it is factory reset
one important thing
there is only a red light on the bottom:crying::crying::crying::crying::crying::crying::crying:
Hi,
You need flash stock back Following links can help you
[GUIDE] Root Sony Xperia C3 Dual D2502 , D2503 On Windows
- INSTRUCTIONS to Install CWM Recovery - (For Everyone)
"perfect flash" repair brick and flash firmware simply(picture guide )
Good Luck!
No Response Thread Closed ..
I'm using Xperia SP from 3 years. Recently, I was about to flash CM12.1 Lollipop ROM.
I did these things seqentially as below -
1. I rooted the phone via Towelroot app.
2. Backup DRM keys with Bakup_TA_Master.
3. Then, Unlocked the Bootloader via Fastboot cmd. (link : http://forum.xda-developers.com/showthread.php?t=2354721 )
4. After that I flashed CWM v6.0.3.5 & created full Backup.
5. Wiped Chahe, Dalvik Chahe, Data & System.
6. Tried to Flash CM 12.1 ROM (downladed from LINK: https://github.com/CyanogenMod/android_device_sony_huashan )
BUT soon after a few minutes of installalation my device showed an error message and it shut down and doesn't started.
It don't shows bootloader, no SONY logo, not reboots to CWM Recovery. It is almost dead, But.....
The only two things it allows me to do is boot to Fastboot Mode & Flashboot Mode when connecting to PC via usb cable.
I dont know what to do now..........
Hi,
Zip from Github have not to be flashed from a recovery.
Try posting your question here to recover your device:
Xperia SP Q&A, Help & Troubleshooting
The experts there may be able to help.
EDIT: Thread closed - Support provided in another thread and by PM.
Hello *,
after unlocking the boot loader and installing a new ROM with flashtool, the device only shows
1. the SONY XPERIA splash screen
2. very short the powered by android
3. endless animated blue waves
Since the device is unlocked, the XPERIA companion refuses to repair it. I tried to flash other roms but with no change. Always the blue waves.
I already tried some of the hints given in all the threads about bricked E3s, but now help yet.
Could please someon give me a hint, how to rescue my phone?
Thanks
Stephan
Download and install Flashtool.
Then open the program and find an icon with an XF (Xperifirm), click on that, select your phone model and country and download a rom.
Then clic the thunder icon, choose Flash mode and in the window, select your rom and mark to flash everything.
Follow the guide.