Database Info

[Q] Please Help

Every time i install a rom a phone my phone wont get service.
Everything works just fine just that it wont get signal.
under my network it say unknown
ive tried multiple roms to but end up getting the same result
i always install the gapps and delete cahe and data
can anyone tell me whats the problem or what im doing wrong ?

CaptainAlex014 said:
Every time i install a rom a phone my phone wont get service.
Everything works just fine just that it wont get signal.
under my network it say unknown
ive tried multiple roms to but end up getting the same result
i always install the gapps and delete cahe and data
can anyone tell me whats the problem or what im doing wrong ?
Click to expand...
Click to collapse
You're not installing the right ROM for your phone maybe? You need to install NS4G roms, not NS roms.

Since you have already tried other ROMs too, I guess that Its probably due to wrong Radio.
What is your phone model mentioned under the battery?
Secondly, boot into bootloader mode by pressing volume up and power button, and tell me the Radio version too.

DJBhardwaj said:
Since you have already tried other ROMs too, I guess that Its probably due to wrong Radio.
What is your phone model mentioned under the battery?
Secondly, boot into bootloader mode by pressing volume up and power button, and tell me the Radio version too.
Click to expand...
Click to collapse
what do you mean by Radio ?
its a SPH-D720
idk which one it is but heres everything sorry
PRODUCT NAME - HERRING
HW VERSION - REV 34
BOOTLOADER VERSION - D720SPRLFC1
BASEBRAND VERSION - D720SPRLF2
CARRIER INFO - SPR
SERIAL NUMBER - 3833FC5D52E800EC

Are you sure that the roms you're trying are for the Nexus S 4G and came from its specific development section? As the previous person mentioned this would be pretty typical if you're installing a wrong rom.
~Nexus S 4G~AOKP JB~Marmite Kernel~

dpeeps74 said:
Are you sure that the roms you're trying are for the Nexus S 4G and came from its specific development section? As the previous person mentioned this would be pretty typical if you're installing a wrong rom.
~Nexus S 4G~AOKP JB~Marmite Kernel~
Click to expand...
Click to collapse
yes i make sure i install the right version of the rom

CaptainAlex014 said:
what do you mean by Radio ?
its a SPH-D720
idk which one it is but heres everything sorry
PRODUCT NAME - HERRING
HW VERSION - REV 34
BOOTLOADER VERSION - D720SPRLFC1
BASEBRAND VERSION - D720SPRLF2
CARRIER INFO - SPR
SERIAL NUMBER - 3833FC5D52E800EC
Click to expand...
Click to collapse
So its a Nexus S 4G
Radio is baseband and it seems to be correct too. which android os version are you running?

DJBhardwaj said:
So its a Nexus S 4G
Radio is baseband and it seems to be correct too. which android os version are you running?
Click to expand...
Click to collapse
yep it is
im running 4.1.1

CaptainAlex014 said:
yep it is
im running 4.1.1
Click to expand...
Click to collapse
Download factory image "sojus" for your Nexus S 4G (d720)
When you extract the downloaded file, you will see some files. Take out the files starting with "radio".
Once you have that file, comment out here or drop me a PM, I will guide you further :good:

DJBhardwaj said:
Download factory image "sojus" for your Nexus S 4G (d720)
When you extract the downloaded file, you will see some files. Take out the files starting with "radio".
Once you have that file, comment out here or drop me a PM, I will guide you further :good:
Click to expand...
Click to collapse
where can i find this ?

CaptainAlex014 said:
where can i find this ?
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/images
guide to flash factory
http://forum.xda-developers.com/showthread.php?t=1785672&highlight=clean+install+4+1+1
http://forum.xda-developers.com/showthread.php?t=1572307&highlight=clean+install

DJBhardwaj said:
Download factory image "sojus" for your Nexus S 4G (d720)
When you extract the downloaded file, you will see some files. Take out the files starting with "radio".
Once you have that file, comment out here or drop me a PM, I will guide you further :good:
Click to expand...
Click to collapse
You seem to have a solution for every problem there is, around here! Good job. :thumbup:
Sent from my Nexus S using xda app-developers app

[Q] Bought a Maxx that says "UNLOCKED.. Status Code: 1"

As stated in the title, I bought a Droid Maxx that apparently is bootloader unlocked. Does this mean I accidentally got a dev edition? Because as far as I know, it's impossible to unlock the retail version...

kuz142 said:
As stated in the title, I bought a Droid Maxx that apparently is bootloader unlocked. Does this mean I accidentally got a dev edition? Because as far as I know, it's impossible to unlock the retail version...
Click to expand...
Click to collapse
does it say Developer Edition below the Verizon logo on the back of the phone? If not you might want to talk with a developer on here....

BladeRunner said:
does it say Developer Edition below the Verizon logo on the back of the phone? If not you might want to talk with a developer on here....
Click to expand...
Click to collapse
No it doesn't actually, I've looked at as many possible distinguishing characteristics on the device and it seems to be the retail version...

kuz142 said:
No it doesn't actually, I've looked at as many possible distinguishing characteristics on the device and it seems to be the retail version...
Click to expand...
Click to collapse
So are you able to flash a custom recovery on that?

BladeRunner said:
So are you able to flash a custom recovery on that?
Click to expand...
Click to collapse
Not sure, is it worth trying? As of now I'm still on 4.2.2 with root and write protect off, and don't want to have to do any full resets if I screw anything up. Also, are there even any custom recoveries available for these devices?

kuz142 said:
Not sure, is it worth trying? As of now I'm still on 4.2.2 with root and write protect off, and don't want to have to do any full resets if I screw anything up. Also, are there even any custom recoveries available for these devices?
Click to expand...
Click to collapse
Here is a version of TWRP for 4.2.2 http://forum.xda-developers.com/showthread.php?t=2458449&page=7 link is in post #3. You can try flashing it in fastboot to see if it will overwrite the stock recovery. I don't believe there is any risk. If it's not compatible it will simply fail.
Method is to flash via fastboot, reboot bootloader, reboot to recovery then reboot system.

BladeRunner said:
Here is a version of TWRP for 4.2.2 http://forum.xda-developers.com/showthread.php?t=2458449&page=7 link is in post #3. You can try flashing it in fastboot to see if it will overwrite the stock recovery. I don't believe there is any risk. If it's not compatible it will simply fail.
Method is to flash via fastboot, reboot bootloader, reboot to recovery then reboot system.
Click to expand...
Click to collapse
Worked great, running full TWRP now!
*survived a reboot too

kuz142 said:
Worked great, running full TWRP now!
*survived a reboot too
Click to expand...
Click to collapse
Was this a new phone or did you buy it used?

BladeRunner said:
Was this a new phone or did you buy it used?
Click to expand...
Click to collapse
Used, bought on swappa because I needed one with 4.2.2, screwed up my old maxx on 4.4 and no way to fix that w/o losing root

kuz142 said:
Used, bought on swappa because I needed one with 4.2.2, screwed up my old maxx on 4.4 and no way to fix that w/o losing root
Click to expand...
Click to collapse
anyway you can post a picture of your bootloader screen?
---------- Post added at 10:51 AM ---------- Previous post was at 10:45 AM ----------
kuz142 said:
Used, bought on swappa because I needed one with 4.2.2, screwed up my old maxx on 4.4 and no way to fix that w/o losing root
Click to expand...
Click to collapse
Which listing on Swappa was it? I was looking at the recently sold ones and am trying to figure out the history.

BladeRunner said:
anyway you can post a picture of your bootloader screen?
Click to expand...
Click to collapse
Differences from bootloader screen of my old maxx are: of course the "unlocked" and status code 1, and the option to "switch console"

Which listing on Swappa was it? I was looking at the recently sold ones and am trying to figure out the history.
Click to expand...
Click to collapse
http://swappa.com/listing/GGX337/view

kuz142 said:
http://swappa.com/listing/GGX337/view
Click to expand...
Click to collapse
Interesting. I think I've seen someone else post pics of a phone like this. They may have been factory test/development phones.

BladeRunner said:
Interesting. I think I've seen someone else post pics of a phone like this. They may have been factory test/development phones.
Click to expand...
Click to collapse
this is what i was about to post. but if not you should try and find out who actually had the phone before the swapa seller

Awesome! It could be just a developer unit, or you might have just found the holy grail of Maxx development. Either way, enjoy your unlocked bootloader and don't hold out for too much cash when some wonderful developer wants to buy it off of you and discover its secrets!

OMG its indeed and Regular Droid Maxx with unlocked bootloader!!
Good Find!
maybe its the first batch of new Droids by lenovo or the owner found a way to unlock the bootloader or was a test device, who knows, anyway its amazing!

[Q] Help me Unbrick my Moto G...please

Sorry for posting this, but please just try to understand me and help solve my problem. I know there is Threads for this, Please... I am just nowhere, my phone just treason me when I needed it most, It is very hard Bricked, nothing working, contacted support and they told me it need Replace (but I can't send to service #close this question)
My Story:
Constant restart loop, on Motorola logo. It can go in Bootloader when press Vol Down and Power Button, but that's it, (actually when going in recovery it goes to Broken Android sign, but than restart again)... so how it happened?? I do not know as u do not, I am just normal user, never done anything to crash system, never Rooted, even not installed any kind Launcher, nothing, just some normal Apps and only two game, and lot of music listening, that's it that's all (also physically it's like new, never ever droped or water splashed even). and one day come home, plug in for charging in my PC as always and boom, some strange app crashes and it restarted for EVERRR, wtf is this just do not understand, WHYY?????? so disappointed and so bored...
Question:
so Can it be Helped? Unbricked? I do not care Contacts or any kind Data, just work again....And if it can please step by step I will follow, and do not redirect me to other thread, just help me out here please
And if it cant be Helped, just say frankly and I will capture video how I am splashing it on REAL BRICK wall and will post it on this thread...this will be closing and **** sending of Motorola
My Spec:
Moto G (16GB Global GSM, no SD card slot, single SIM) - KitKat 4.4.4 (it bricked so I cant see Falcon version or other spec, but I have original Box)
I searched everywhere and seen lot, but all of them are 4.4.2 or 3 and also US versions, strange languages and so on. also here on XDA but as I'm Noob I do not know if it will work for me, and before destroy it completely I wanted to know from people who knows much more then me, what can do and what not, so please be patient for my Noobety, Thanks and Sorry...

help_me_if_u_can said:
Sorry for posting this, but please just try to understand me and help solve my problem. I know there is Threads for this, Please... I am just nowhere, my phone just treason me when I needed it most, It is very hard Bricked, nothing working, contacted support and they told me it need Replace (but I can't send to service #close this question)
Click to expand...
Click to collapse
Do you use Windows, Linux, Mac?
EDIT: Have you tried this yet? http://forum.xda-developers.com/showthread.php?t=2542219

StrangerWeather said:
Do you use Windows, Linux, Mac?
EDIT: Have you tried this yet? http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
I have Windows 8 x64, I did not tryed anything yet, want to know what would be clever and correct to do in my situation...which one should I download ???? from here
have no idea, all I know is before It bricked it was on 4.4.4 and I do not have US version, it is GLOBAL GSM
and it is Locked, never Unlocked Bootloader

help_me_if_u_can said:
I have Windows 8 x64, I did not tryed anything yet, want to know what would be clever and correct to do in my situation...which one should I download ???? from here
have no idea, all I know is before It bricked it was on 4.4.4 and I do not have US version, it is GLOBAL GSM
and it is Locked, never Unlocked Bootloader
Click to expand...
Click to collapse
Dual sim or single sim? What region?

StrangerWeather said:
Dual sim or single sim? What region?
Click to expand...
Click to collapse
Single Sim, Georgia (not in US)

help_me_if_u_can said:
Single Sim, Georgia (not in US)
Click to expand...
Click to collapse
Ok, is it XT1032?
Don't worry, we'll get there...

StrangerWeather said:
Ok, is it XT1032?
Click to expand...
Click to collapse
I do not remember, is there any way to check it? I will do that if so, thanks

help_me_if_u_can said:
I do not remember, is there any way to check it? I will do that if so, thanks
Click to expand...
Click to collapse
Not sure. Just one thought, why don't you try a factory reset? https://www.youtube.com/watch?v=LoTAsuPey_E

StrangerWeather said:
Not sure. Just one thought, why don't you try a factory reset?
Click to expand...
Click to collapse
Remember with Support Team I already did that, but not worked.
I will try again as in this video after couple hours and share results quickly.

StrangerWeather said:
Not sure. Just one thought, why don't you try a factory reset?
Click to expand...
Click to collapse
so, I can reach to wipe manu and wiped it also wipe cache from there but not like in this video, my device is laggin on every step and after I wiped it steel when restart it normaly stuckes on Motorola
one thing to add, my device is not Power Off, it constatnly restating, if I will try to power off it will power on again

help_me_if_u_can said:
so, I can reach to wipe manu and wiped it also wipe cache from there but not like in this video, my device is laggin on every step and after I wiped it steel when restart it normaly stuckes on Motorola
one thing to add, my device is not Power Off, it constatnly restating, if I will try to power off it will power on again
Click to expand...
Click to collapse
Ok, don't worry, just follow the tutorial to reflash stock firmware and it will work again.
You need this: http://www.filefactory.com/file/1dw..._4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip
The only thing to say is that when you reach:
Code:
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
you may have to try this instead if it doesn't work:
Code:
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
Let us know how it goes!

okey I will try it right now, thaanks

StrangerWeather said:
Let us know how it goes!
Click to expand...
Click to collapse
I tryed but no result, I think because that my bootloader is locked....here I made screenshot of whole process and every command gives me [OKEY] but after that is failure....it I think is permissions problem because locked bootloader
So, I need to unlock it right?????? I already have key from motorola, just get... I will wait your answer...

StrangerWeather
??????????????

help_me_if_u_can said:
StrangerWeather
??????????????
Click to expand...
Click to collapse
Oops, sorry, I forgot... It's up to you about unlocking bootloader. If you do, you can't send your phone back for them to sort out the problem. However, if you root your phone, you'll be able to install a custom recovery such as TWRP, sideload a rom, and hopefully all will work. But of course I can't guarantee that it will work, so it's a risk. If it were me, I would send it back as you haven't rooted it and really it shouldn't brick itself on its own for no reason.

StrangerWeather said:
Oops, sorry, I forgot... It's up to you about unlocking bootloader. If you do, you can't send your phone back for them to sort out the problem. However, if you root your phone, you'll be able to install a custom recovery such as TWRP, sideload a rom, and hopefully all will work. But of course I can't guarantee that it will work, so it's a risk. If it were me, I would send it back as you haven't rooted it and really it shouldn't brick itself on its own for no reason.
Click to expand...
Click to collapse
tell me, if I want to install this stock firmware I need to unlock bootloader??? and because it not installing? or my device is problematic and it can be installed on locked bootloader?

help_me_if_u_can said:
tell me, if I want to install this stock firmware I need to unlock bootloader??? and because it not installing? or my device is problematic and it can be installed on locked bootloader?
Click to expand...
Click to collapse
This what the op says:
I have only tested this on a UK Retail Moto G with an unlocked bootloader, however as these are the original stock signed image files from Motorola it should work on all devices.
[. . .]
Edit: tkm89 reports that he was able to use this guide to restore Stock Retail British firmware on a bootloader locked Tesco-mobile Moto G
Click to expand...
Click to collapse

StrangerWeather said:
This what the op says:
Click to expand...
Click to collapse
I unlocked BOOTLOADER but steel geting Fail after OKEY, what could be reason? can I do something??? any ****ing thing to start this device working??

help_me_if_u_can said:
I unlocked BOOTLOADER but steel geting Fail after OKEY, what could be reason? can I do something??? any ****ing thing to start this device working??
Click to expand...
Click to collapse
I'm not sure what the reason is but if I were you I would now try to root my device, install TWRP, sideload a rom, and hope for the best.
To root, use: http://www.theandroidcop.com/how-to-root-motorola-moto-g/
Hope it goes well!

no help....
on every step, I am getting Fails....What could be Problem??? drivers??? or what?????? ANYONE????????
Unlocked Bootloader

XT1250 wiped with TWRP... now can't install O.S.

So basically, after I rooted, I was stuck in a bootloop at the "warning: bootloader unlocked" screen when I tried to boot, so I tried "factory reset" with the same result. Then I DL'd the stock xt1250 firmware and the update back to 5.0.2 (which the phone had before I F'd it up), but TWRP won't install either of them.
I can access the bootloader, and TWRP recovery, but any other option from the bootloader, or restarting results back in the "warning: bootleader unlocked" screen loop
I've seen a few places on here that there is a Brazilian version of 6.0.1 that it TWRP-able, but living in the U.S.of.A. and not being able to speak Portuguese, I was wondering if that would work for me?
thanks,
N.K.

Actually, I just tried copying the Brazilian 6.0.1 onto the phone and I got an error that "the file is larger than the device limit", so I guess that option's out!
I feel horrible right now! I just got this awesome phone, and broke it within 2 days
I really hope someone can help!

Status Update:
-I downloaded a bunch of zips... American xt1250 4.4.4 and conversion to 5.0.2 (which the phone is), Brazilian xt1225 5.0.2 and 6.0.1
-I tried RSD because twrp was obviously doing nothing.
-I ended up getting one to work, which was the Brazilian 5.0.2 with some files from another one (I forgot which, but I think the American 5.0.2 conversion) because is was lacking some key components (which it seems they all were).
-none of the others worked at all
-I have yet to test my sim card in it, but...
Problem:
-I got my phone up and running, but now the wifi wont turn on. It says "turning on wifi..." but nothing ever happens. I looked it up and found lots of stuff about wifi and bluetooth not turning on, but my bluetooth seems to turn on as it should.

Aright... I installed Bliss Rom, and it all works! The camera sucks compared to the stock camera, but I can live with that. Thanks for the help everyone! :good: :good: :good:

albinoethiopian3 said:
I've seen a few places on here that there is a Brazilian version of 6.0.1 that it TWRP-able, but living in the U.S.of.A. and not being able to speak Portuguese, I was wondering if that would work for me?
Click to expand...
Click to collapse
The TWRP-flashable 6.0.1 ROM was made by a Verizon user who lives in the U.S. It works for ALL Quarks. It doesn't matter what language you speak, you choose the language you want at the bootup screen. Just like every other version of Android.
albinoethiopian3 said:
Actually, I just tried copying the Brazilian 6.0.1 onto the phone and I got an error that "the file is larger than the device limit", so I guess that option's out!
I feel horrible right now! I just got this awesome phone, and broke it within 2 days
I really hope someone can help!
Click to expand...
Click to collapse
Tons of people are using that TWRP-flashable ROM. You have 64GB storage space unless you've used it all up. So, there's no reason you shouldn't be able to transfer that file and flash it.
albinoethiopian3 said:
Status Update:
-I downloaded a bunch of zips... American xt1250 4.4.4 and conversion to 5.0.2 (which the phone is), Brazilian xt1225 5.0.2 and 6.0.1
-I tried RSD because twrp was obviously doing nothing.
-I ended up getting one to work, which was the Brazilian 5.0.2 with some files from another one (I forgot which, but I think the American 5.0.2 conversion) because is was lacking some key components (which it seems they all were).
-none of the others worked at all
-I have yet to test my sim card in it, but...
Problem:
-I got my phone up and running, but now the wifi wont turn on. It says "turning on wifi..." but nothing ever happens. I looked it up and found lots of stuff about wifi and bluetooth not turning on, but my bluetooth seems to turn on as it should.
Click to expand...
Click to collapse
Glad you got it running! However, in the future don't just download and flash anything. Brazilian 5.0.2 won't work because it's not made for your phone (U.S. Moto Maxx XT1250), and the radio/modem won't work. The Brazilian TWRP flashable 6.0.1 file works in part because @iiWoodstocK used custom @bhb27 kernel to make it compatible. It's stock Motorola Marshmallow ROM otherwise. So, that one was OK, but just flashing XT1225 firmware for your XT1250 is not wise.
Also, you can't downgrade bootloaders, so be careful when flashing different versions of software. You can downgrade from MM to Lollipop or even Kitkat, but you have to leave out gpt.bin.
It seemed you were just flashing a lot of stuff, so be careful.
albinoethiopian3 said:
Aright... I installed Bliss Rom, and it all works! The camera sucks compared to the stock camera, but I can live with that. Thanks for the help everyone! :good: :good: :good:
Click to expand...
Click to collapse
You can change the camera. There's stock Moto Camera files in this forum you can flash. This is from the Bliss ROM thread:
kitcostantino said:
^^ agreed. great ROM. as far as camera quality, that is just the stock CM camera. idk why. i never use it for that reason. there are a few "moto canera and gallery" flash able zip files on androidfilehost.com and mega. or you can try to install them from Play store. the moto ones are better in that aspect. the htc 10 camera works okay as do several others. find a replacement that works for you.
Click to expand...
Click to collapse
kitcostantino said:
the moto one works fine for me. i couldn't find the link i got it from, so i just uploaded it to mega. (where i got it from in the first place. ) https://mega.nz/#!ChsyQZSC!ULtLteziJ__n7GOt_XmlSvaFz_tf68u0RvEDsNq4NAs
Catch and release. lol
Click to expand...
Click to collapse

Hello all here is my situation, was running cf's Rom and backed up in twrp backed up all available options using mod 04 version of twrp.
Flashed the newest cm 13 for a day then this morning wiped and tried to restore my backup of cf's Rom all goes well until it's about done then then in red letters it says no modem installed system busy. My phone is a 1254 any assistance with this would be greatly appreciated.
Sent from my HTC6500LVW using XDA-Developers mobile app

Steve One said:
Hello all here is my situation, was running cf's Rom and backed up in twrp backed up all available options using mod 04 version of twrp.
Flashed the newest cm 13 for a day then this morning wiped and tried to restore my backup of cf's Rom all goes well until it's about done then then in red letters it says no modem installed system busy. My phone is a 1254 any assistance with this would be greatly appreciated.
Click to expand...
Click to collapse
Try reflashing the modem/radio in ADB. Not restoring in TWRP, but actually flashing the XT1254 radio again.

ChazzMatt said:
Try reflashing the modem/radio in ADB. Not restoring in TWRP, but actually flashing the XT1254 radio again.
Click to expand...
Click to collapse
Have no computer to do with.
Sent from my HTC6500LVW using XDA-Developers mobile app

Steve One said:
Have no computer to do with.
Sent from my HTC6500LVW using XDA-Developers mobile app
Click to expand...
Click to collapse
there's also a TWRP flashable version

ChazzMatt said:
there's also a TWRP flashable version
Click to expand...
Click to collapse
Thank you so much for your help ChazzMatt sir I don't suppose you could give me a link or pm me with a possible download kind sir, would this be a image file to flash like flashing twrp?
Sent from my HTC6500LVW using XDA-Developers mobile app

Steve One said:
Thank you so much for your help ChazzMatt sir I don't suppose you could give me a link or pm me with a possible download kind sir, would this be a image file to flash like flashing twrp?
Sent from my HTC6500LVW using XDA-Developers mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/development/droid-turbo-xt1254-bootloader-radio-t3259327
There's fastboot and TWRP flashable in that first post. Read carefully.

ChazzMatt said:
http://forum.xda-developers.com/droid-turbo/development/droid-turbo-xt1254-bootloader-radio-t3259327
There's fastboot and TWRP flashable in that first post. Read carefully.
Click to expand...
Click to collapse
Does one flash as an image file?
Sent from my HTC6500LVW using XDA-Developers mobile app

Steve One said:
Does one flash as an image file?
Sent from my HTC6500LVW using XDA-Developers mobile app
Click to expand...
Click to collapse
In TWRP it's just a zipped file for the radio.

ChazzMatt said:
In TWRP it's just a zipped file for the radio.
Click to expand...
Click to collapse
Apparently twrp was hung up,just got back home from apple orchard played around in twrp and was able to flash a ROM again. Seriously thinking of flashing back to twrp mod 2.
Sent from my DROID Turbo using XDA-Developers mobile app

Can't find matched carrier. Check NT-code: FFFFFF : 84

I had 10ulm and flashed it with the G710AWM and now every time I boot my phone i get:
WARNING: Current version is not available for user. Can't find matched carrier. Check NT-code: FFFFFF : 84
The phone works fine since it was unlocked, but I am getting a ton of calls go straight to voicemail and this may be the issue? How can I fix this?
any help appreciated. Thanks

also wifi calling is nowhere to be found under call settings. It seems like I don't have the setting on this version? thoughts

Don't bother pal, stick with the official rom, I had this same issue best option is to just stick with the same variant as your phone, might not be latest but it works good. FYI I have g710emw and was using g710em rom

rash.m2k said:
Don't bother pal, stick with the official rom, I had this same issue best option is to just stick with the same variant as your phone, might not be latest but it works good. FYI I have g710emw and was using g710em rom
Click to expand...
Click to collapse
You are probably right. What a pain to have to flash again and go back?
How are you guys backing up so that you just restore to the same phone you had without having to set up everything again?

Brighter85 said:
You are probably right. What a pain to have to flash again and go back?
How are you guys backing up so that you just restore to the same phone you had without having to set up everything again?
Click to expand...
Click to collapse
I didn't restore, I tried out the rom first, and then just wiped it. What broke it for me was the wifi mac address somehow became lost while using it, maybe some software glitch only by flashing the same variant was I able to restore it.
Best to root and then backup and restore

Brighter85 said:
I had 10ulm and flashed it with the G710AWM and now every time I boot my phone i get:
WARNING: Current version is not available for user. Can't find matched carrier. Check NT-code: FFFFFF : 84
The phone works fine since it was unlocked, but I am getting a ton of calls go straight to voicemail and this may be the issue? How can I fix this?
any help appreciated. Thanks
Click to expand...
Click to collapse
Just reinstall the kdz with refurbish option

dapolicy said:
Just reinstall the kdz with refurbish option
Click to expand...
Click to collapse
Hey there, how do you do this KDZ with refurbish option? Will this mean flashing again anyways?
I was hoping that by now the official android 10 version from LG would be out for the unlocked 10ulm, but it seems that they will never update this phone for some reason. This was the Google Fi unlocked G7.
Suggestions please. Thanks

Brighter85 said:
Hey there, how do you do this KDZ with refurbish option? Will this mean flashing again anyways?
I was hoping that by now the official android 10 version from LG would be out for the unlocked 10ulm, but it seems that they will never update this phone for some reason. This was the Google Fi unlocked G7.
Suggestions please. Thanks
Click to expand...
Click to collapse
It means flashing the phone again but select refurbish option in lgup

dapolicy said:
It means flashing the phone again but select refurbish option in lgup
Click to expand...
Click to collapse
Thanks for replying.
I noticed you are the leader of the other thread I posted, so I will ask here so not to bug you too much
Will the choosing of refurbish option erase the serial or IMEI or anything else that I should be aware of?
Also, when you say flash again you mean using the canadian version correct? I was wondering about the Korean version vs the canadian and what advantage would there be in any.
If you could, please lead me to the instructions to flash again. When I did it, I used a guide from some dude on youtube and I can't find that again.
Also, read somewhere that the error at boot could be fixed by rooting and then changing something with the explorer app. Not sure if that is worth it. I just hate backing up and restoring to find I am logged out of most every app and all settings have to be set up again. It takes me hrs and I am not that technically savvy as you guys.
Thanks for your time and have a good evening.

Brighter85 said:
Thanks for replying.
I noticed you are the leader of the other thread I posted, so I will ask here so not to bug you too much
Will the choosing of refurbish option erase the serial or IMEI or anything else that I should be aware of?
Also, when you say flash again you mean using the canadian version correct? I was wondering about the Korean version vs the canadian and what advantage would there be in any.
If you could, please lead me to the instructions to flash again. When I did it, I used a guide from some dude on youtube and I can't find that again.
Also, read somewhere that the error at boot could be fixed by rooting and then changing something with the explorer app. Not sure if that is worth it. I just hate backing up and restoring to find I am logged out of most every app and all settings have to be set up again. It takes me hrs and I am not that technically savvy as you guys.
Thanks for your time and have a good evening.
Click to expand...
Click to collapse
Flash with the kdz you used before, Canadian firmware is better than Korean. In lgup select refurbish instead of partition dl. It won't tamper with your IMEI and you will loose all your data

Hi dapolicy,
I am done with the LG G7ULM since it will never be updated officially.
I really like having the fingerprint sensor on the back and it seems that the LG G8 is the last iteration of phones from LG with this feature and it is an upgrade from the G7.
It is cheap here in the US.
Which version of this phone should I look for? I will be using it on Mint Mobile, so an unlocked one sounds great and all, but then you see what happened to the G7 ULM that never got android 10 unless it was tied to a carrier.
So, what do you suggest I do so I can get the next couple of updates for android with the G8?
Thanks man!

dapolicy said:
Just reinstall the kdz with refurbish option
Click to expand...
Click to collapse
I get the sime problem with my LG WING and I don't know to solve it

Daoud ben said:
I get the sime problem with my LG WING and I don't know to solve it
Click to expand...
Click to collapse
If the firehose was available for the Wing/Velvet you can hex the FTM and fix the NT Code on the Wing.You can try the engineering service menu,but I highly doubt the IMPL is 0 under MID.