I was using and at the same time charging my phone by my pc I trope it by mistake from 5cm high and the device closed no response and no red light any more.
A few weeks before the phone download the HTC firmware and the win 8.1 (8.10.14219.341) Preview rom.
The device is not responding to any of the hard keys combination but when I connect it to my pc I see that found the device Qualcomm HS-USB QDLoader 9008 (com9).
Is there any way to install again the ROM ?
Related
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
4tunecookie said:
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
Click to expand...
Click to collapse
It is hard bricked my friend a lot of us have suffered this also, JTAG or maybe warranty is your only option.
hi,
first of all i have a qualcomm drivers 9008 and a nexus that not booting no recovery no download mode
and now it's show no thing no drivers no sound when i plug to pc
now i know that it's gone :crying:
Depressed huh, how did you brick it ?
9008 on a Nexus 5 means you can't do anything more, send it to LG for repairs or get a replacement.
I'm wondering if anyone has a Nexus 5 D821 motherboard in working condition that they would like to get rid of. Or if anyone knows of a way to get into Qualcomm 9008 mode from LGE Android Platform USB Serial Port. The phone seems dead, doesnt react to button presses, Vol Up+Vol Down+ Power doesnt change anything, the phone restarts back into LGE Android Platform USB Serial Port mode. No download mode. From what I know my EMMC wasn't dead (passed all the Board Diag Tests). Phone died after I flashed SBL1 with boarddiag (Even though I was told not to...)
There is a guide in general forums.
wangdaning said:
There is a guide in general forums.
Click to expand...
Click to collapse
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Excudent said:
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Click to expand...
Click to collapse
I hard bricked my phone yesterday and was stressing out quite a bit! Luckily I found this guide: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Note: I assume that you know what you are doing. Since you know about Qualcomm HS-USB QDLoader 9008 mode, you probably do, but you can do some serious harm with this mode.
Essentially, the gist of the guide comes down to installing the qualcomm drivers so that the phone becomes detected as a Qualcomm HS-USB QDLoader 9008. After this, you can use Boarddiag as you are used to to reflash the partitions. Note that for me, the phone was not in sahara dload mode and Boarddiag would not work. What I had to do was the following (these steps are done after the drivers are properly installed)
Unplug the Nexus 5 from your computer
Open the back cover and remove the 6 top screws holding the other protective cover
Disconnect the battery cable for 5 seconds. Reconnect it after
While holding the volume up and down button, plug it into your computer. It should now be in Sahara download mode and Boarddiag should work.
Let me know how everything goes!
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
UP
UP
eyznec said:
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
Since there is no information about harbricked Acer Z330 on XDA, I sugedt you put your question on Questions and Answers to see if any member has a solution for your problem.
Hi everyone,
I have a second device as LG_G2 D802 and i gave it to a my friend. He said he rooted it and after a while bricked it.
Phone is not turning on normally, lights green and blue, LG logo appears and after a short while the phone is restarting. I can only enter download mode.
I've tried some options with using XDA topics but i couldn't solve it unfortunately. The last situation is: pc doesn't detect phone in download mode.
With short circuit, sometimes it seems as Qualcomm HS-USB Diagnostics 9006, sometimes Qualcomm HS-USB QDLoader 9008 in device manager.
I used SRK TOOL for 9006, it finished successfully but when i unplugged phone and plug battery and plug usb and enter in download mode, pc didn't detect phone, any devide, etc.
I used Boarddiag for 9008, AP TEST: Successful EMMC TEST: Successful SDRAM TEST: Successful, all process is successful. But again, in download mode, PC doesn't detect anything of the phone.
In the videos I watched, after successful SRK TOOL or Boarddiag processes, pc must detect phone in download mode but the same thing didn't happen to me
I used Win 8.1 64 bit and Win 7 X86, but same thing happened. Stuck in pc detecting problem in download mode. I installed drivers, too.
Is there anything that can be done about it?
Does anyone have an idea?
Thanks.