So I got a 710 Lumia, Im passing it down to my mom, I havent used it in years, running 1 custom rom 7.8, my problem is that is kinda slow, slower than I remember, factory reset did not help, so after some searching I read it might be 7.8's fault in this model so Im trying to downgrade
After some searching on "Internetz" I got into the idea I need both Navifirm to download the firmware and Nokia Care Suite to install it.
After some more searching I fount this list of product codes, I did not copy pasted it here because I coulnt find the way to put it as spoilers and its too long, it would spam.
seidea.com/2013/08/09/product-codes-of-nokia-lumia-710 (sorry for the half-ass link, apparently I cant even link unless I have certain number of posts, just add www's)
Anyways, how do I know which model/product code whatever version I need for my phone? also it would help if anyone got a link to a tread on how to downgrade from 7.8 to 7.5 properly, thanks
Related
i have samsung omnia w - i8350
Model - SAMSUNG GT-I8350
Os Version : 7.10.8107.79
Firmware Version : 2424.11.11.7
how to jailbreak or unlock for installing third party apps in it
i have tried windowbreak but after dialing ##634#
diagnosis ver. 1109
and after dialing *#9908#
it shows
GUMI Test Band
Suwon2G Test Band
Suwon3G Test Band
and i also tried chevronwp7 tool with installing certificate to my phone but it always shows
"Sorry I'm having trouble communication with the phone"
-Please Make sure its connected using USB
-Please Start Zune Application
but i always get this error
so will you help me to jailbreak my phone
and please tell me step by step method
I have had the connection error twice and restarting my phone fixed it. I am dev unlocked but not interop.
Cheers! -M Xda member since 2007.
ChevronWP7 Unlocker hasn't worked in nearly a year (since NoDo came out). If your OS version is 7389 or higher, you can't use it. This was pretty clearly documented, not just here on XDA-Devs but on a number of tech sites and phone hacking blogs and so forth.
I'll look into your Windowbreak problem. Typically, it means you have the KK2 or later firmware version from Samsung. Flashing an older version to the phone may let you use Windowbreak. Annoyingly, Samsung doesn't seem to use easily-distinguishable version numbers for their significant firmware updates, or at least not ones that I find easily memorable...
GoodDayToDie said:
ChevronWP7 Unlocker hasn't worked in nearly a year (since NoDo came out). If your OS version is 7389 or higher, you can't use it. This was pretty clearly documented, not just here on XDA-Devs but on a number of tech sites and phone hacking blogs and so forth.
I'll look into your Windowbreak problem. Typically, it means you have the KK2 or later firmware version from Samsung. Flashing an older version to the phone may let you use Windowbreak. Annoyingly, Samsung doesn't seem to use easily-distinguishable version numbers for their significant firmware updates, or at least not ones that I find easily memorable...
Click to expand...
Click to collapse
i have found a 7720 build samsung omnia w rom, but it is a plus poland brand rom.
So if i flash it to my omnia w, which is not a plus poland mobile, will it cause me problems. I just want to jailbreak my phone and i already have updated my phone to 8107
smartshubhamlive said:
i have found a 7720 build samsung omnia w rom, but it is a plus poland brand rom.
So if i flash it to my omnia w, which is not a plus poland mobile, will it cause me problems. I just want to jailbreak my phone and i already have updated my phone to 8107
Click to expand...
Click to collapse
It will cause the problem. Windows phones are not just like others where flashing goes smooth.
Cross your fingers and wait for jailbreaks. We are all waiting from last 3 months
Guys new diagnosis update for omnia w has been arrived. I update my diagnosis ver . but now it is not showing GPRS menu . What to do ?? ( Ver.0210)
hey how did u get the updated diagonosis ver???
i dont know. Update had come in marketplace. so i updated it. later it was showing ver 0210 before it was 1109. but now it is not opening the gprs menu. After dialing *#9908# it doesnt show gprs menu !
yap We are waiting from last 3 months
Since there is no news about interop/jailbreak omnia w
I was thinking: In gprs menu the windows break xml dont appers,
but there is a text box, if we write the windowbreak.xml code to the box and save it it is possible the jailbreak?
I can try it but I dont have the file and I dont know how to take it.
any help?
Here is the file!
How can i use this file now..Please tell me step by step
brunooz said:
Here is the file!
Click to expand...
Click to collapse
Thanks man, It didn't work
Best regards
Exodusrasta said:
Since there is no news about interop/jailbreak omnia w
I was thinking: In gprs menu the windows break xml dont appers,
but there is a text box, if we write the windowbreak.xml code to the box and save it it is possible the jailbreak?
I can try it but I dont have the file and I dont know how to take it.
any help?
Click to expand...
Click to collapse
maybe u should ask this to heathcliff or jaxbot. After all, they are the creator of window break me.
smartshubhamlive said:
maybe u should ask this to heathcliff or jaxbot. After all, they are the creator of window break me.
Click to expand...
Click to collapse
it's not possible
Sorry anyone can help me to unlock my windows phone 7? i have an omnia w upgraded to 8773 firmware, i can do the downgrade with zune until the 8170 firmware, help me please, i need to unlock!
Hi guys, first of all I don't know if you need a General presentation of me... anyway... I have that good toy mentioned in the title and I'm looking for a way to interop-unlock it... I've studied for a week (I'm a computer programmer and I spend much of day on the computer so it's usual for me... ) and I would like to know if after the download of Network _Setup v.1.0.0.0.xap I can reset the phone firmware to the first (the one that was on the phone when I bought it, with no upgrades...) and try to fully unlock it (I have already unlock it with the student's developer account, app hub and so on... but it's not enough for me... ) with the Heathcliff interop-unlocker.xap... Is this possible?
Here's my device information:
Nokia Lumia 800
Vodafone SW variant ID212 v.01
Windows Phone 7.5 Mango
OS version: 7.10.8107.79
Firmware Revision Number: 1600.2487.8107.12070
Hardware Revision Number: 112.1402.2.3
Bootloader version: 7.35.0.0
SOC Processor Version: 0.74.2.1
I used the Nokia_Interop_Unlock_by_Heathcliff74.xap but no results, now I can't install more .xap, I have the error Error - 0x81030120
I tried too... Same results, but I think it should be due to the updates of OS... Windows, as I read, made an update to fix a bug that allowed app to entry or modify register keys... but... If you don't have the updates (virgin OS, the first) you should be able to do that... Am I wrong guys of xda?
So probably if you reflash the first OS that was in the device, and retry the heathcliff hacking after got a "Network Setup" not upgraded (v. 1.0.0.0 ???) version and deployed it in the phone using the Application deployer...
I think I will try this way soon... If anybody as any suggestions.......
Hi,
Unfortunately not possible (yet). No-one managed to do this on a NOKIA so far. I'm trying, but the NOKIA's are well-protected.
I hope to find an unlock asap, but there is really no way to tell if or when I will succeed.
Ciao,
Heathcliff74
Well... I have a strange issue... but on the other hand I feel I´m not alone. However it´s kind of messy trying to get a full picture from XDA how to get around my problem.
I have a 3-branded Omnia 7 with the following info:
OS 7.10.7720.68
Firmware 2424.11.9.1
Hardware 3.15.0.4
Radio Software 24.24.11.9.1
Radio Hardware 0.0.0.800
Bootloader 5.9.0.6
Chip SOC 0.36.2.0
My issue... well Zune keeps telling me Update 7740.16 is available (iI guess the Tango will come after that update, right?). I let Zune update but it comes back as a failure "error 80180048". Ok, so I tried to update using this guide http://forum.xda-developers.com/showthread.php?t=1306415
I got all files downloaded (lang files for each update... ) and it started ok... but after installation it came back with the same error as via Zune.
I tried to make a hard reset to eliminate the possibility that the unlock (rootacces) had anything to do with it... same problem.
As I understand I should go back to the Samsung Omnia 7 version as it came in the box, right? After that letting Zune handle the complete update from scratch? Well... how do I do that? I have found som threads but I´m not really sure witch one to use...
Can someone please give me some directions to get this to work? What files do I need and how do I restore the phone to it´s original state? (in the box-state).
I bought the phone secondhand since I use 3 (Three) in Sweden. I have had NO problem with it at all... But I get soooo anoyed with Zune telling me to update... so I thought "What the heck!?"...
Well... I guess I sorted it myself... followed the guide here: http://forum.xda-developers.com/showpost.php?p=11713948&postcount=1
I have to admit I was really uncomfortable doing this... But after getting the correct files downloaded it was really easy. The phone downgraded to the first version of Windows Phone 7... I screamed out loud when I saw the old green round Windowslogo... but after a couple og updates via Zune Mango was installed... the the updates rolled on and now I´m on the latest release. I feel quite happy since I don´t have to do this when WP 7.8 arrives this fall.
// Manneman
My Flex2 is LS996ZV4, i bought it in Cuba. It never got any OTA update since i rooted it very early and the software update notification didnt showed up there. Im living now in Peru and the notification does show up (by the way it can be seen in the screenshot), but... the update does not work because the phone is rooted and i find no way to unroot it due to its old software version(V4). Im in some kind of a loophole here
In the mean time, my phone overheat and lags like crazy! And i've been using it like this for almost a year now...
I asked this before, and i got no response, guess is not something easy to do.
Thanks in advance. Any tips will be higly appreciated.
Do some search in the forum and you will find similar threads about this issue for H950 or other variants check if it applies to your model or try it on your own if it works good then you are fine if it doesnt you will have to wait for professional support by other members who have exp with this device
Thanks for the tip @yeyoo. Im starting to believe there is no solution at hand...
I have searched... and almost every advice i read implies going back flashing the stock image and unrooting. But i cant do It because i cant find an image of this old software vers.(v4) to download.
I think you dont need the same version you have you can flash higher version kdz easily and it will remove root automaticly or you can try to update through lg mobile support tool on a pc
(Please delete, post moved to other forum)
Hi all,
So i,ve been reading the forums here for a little while, gathering as much info as i possibly could. This is my first post, in hopes of getting a little more clarification from some of the more experienced people on here.
Im currently living in China, where I plan to buy a couple of P20 pro’s, one for me and the other for the wife. The phones here in China are normally locked down, with no google play, and normally installed with a whole bunch of local apps.
I would like to flash an international stock firmware back to the phones. From what I’ve read, i will need to first need to install TWRP. Im using a MBP, so im guessing ill need to install the Android Debug Bridge.
Im a little confused when it comes to the firmware file versions. I realise that the handset model changes somewhat, so I guess im asking what do I need to be careful of in this regards? What do all of the different letters and numbers in the firmware file mean? I’ve worked a few out, but a definitive guide would be much appreciated.
If I want to get to a non-country modified version, of the stock firware, then what file should I be looking for? Im guessing its a non-region specific version. Is it fine to just flash this to the phone using TWRP, as long as its the correct version, dual sim, 6Gig mem, 128G storage, and the P20 Pro. Or do I also need to be aware of some other differences?
Finally what is the preffered method for unlocking the bootloader? I’ve seen different post, some mentioning registering with Huawei, and other talk about an unlock tool... what do you use?
Any help gratefully appreciated.
Bp_tec
Bootloader
Deleted