Database Info

Full root for A700 and A701 tablets

WARNING. THIS is ONLY for tablets running ICS. If you are running Jelly Bean, You May Brick your device!!
Again, this is for ICS ONLY!
Running this root on a Jelly Bean OS can cause your tablet to stop functioning as it is designed for ICS only. If you have a Jelly Bean Operating system, then please use Vorbeth's or Moscow Desire's Easy Root Package located in the Development Forum. If you do not know which OS you currently have, then you should ask questions before rooting.
Method 1. Universal for A700 and A701 Tablet
1. Enable adb mode: Settings -> Developer options -> USB debugging - check it point.
2. Unlock your bootloader for fastboot, follow here. Then reboot a tablet.
3. Download arhive. Unpack it to any place.
4. Open the directory with the unpacked archive. Execute file:
for windows with the rights of administrator:
Code:
runit.bat
Your firmware is now rooted.
5. At first it is necessary to start the Superuser program, at least 1 time after receiving root. And only then programs that require root access.
ATTENTION!
Don't install Busybox! It is already installed and established! If you reinstall it, some programs will become unable to access root permissions!
------------------------------------------------------------------------------------------------------
Method 2. With the patched kernel from the A700 tablet
For ICS A700 firmware only!
1. Enable adb mode: Settings -> Developer options -> USB debugging - check it point.
2. Unlock your bootloader for fastboot, follow here. Then reboot a tablet.
3. Download this arhive. Unpack it to any place.
4. Open the directory with the unpacked archive. Execute file:
for windows with the rights of administrator:
Code:
flash-ICS-patchedBoot.bat
Your boot.img is now patched and firmware is now rooted.
5. At first it is necessary to start the Superuser program, at least 1 time after receiving root. And only then programs that require root access.
6. Now you will have to install the following programs:
BusyBox
Titanium Backup
7. Run BusyBox and go through the install steps. During this SU should ask permission to give BB root access, if it does, it worked!
------------------------------------------------------------------------------------------------------
Method 3. From CWM recovery for A700 and A701 Tablet - Not available due to problems in the work of CWM recovery!
1. At the tablet must be installed CWM recovery.
2. Download arhive ICS_Rooting_recovery.zip. Put it on SD-card. Insert the SD-card in the tablet.
3. Run CWM recovery on the tablet and flash ICS_Rooting_recovery.zip.
Your firmware is now rooted.
4. Now you will have to install the following programs:
SuperUser
Titanium Backup
At first it is necessary to start the Superuser program, at least 1 time after receiving root. And only then programs that require root access.
ATTENTION!
Don't install Busybox! It is already installed and established! If you reinstall it, some programs will become unable to access root permissions!
------------------------------------------------------------------------------------------------------
Method 1, in contrast to method 2, does not affect the core of the system. This makes it possible to receive future firmware update. But only if you do not forget to make backups before making changes to the system and restore it before upgrading.
PS: I tried to make a method 1 as safe as possible. But I have not had a chance to test it completely. So if it does not work, be sure to let me know in this thread and I modified it.

great work ! Thank you for this :good:
BTW the the script is called "flashpboot.bat" and not "flash-ICS-patchedBoot.bat" in the archive.

Really great thanks for it.
Just a question, can it be unrooted/undone by flashing 028-stock rom?
Gesendet von meinem A700 mit Tapatalk 2

KruSan said:
Really great thanks for it.
Just a question, can it be unrooted/undone by flashing 028-stock rom?
Gesendet von meinem A700 mit Tapatalk 2
Click to expand...
Click to collapse
yes

the patch with Acer_AV043_A700_1.028.00_EMEA_FR doesn’t work after flashing the patched boot the tablet doesn’t boot it stuck at Acer logo

moom999 said:
the patch with Acer_AV043_A700_1.028.00_EMEA_FR doesn’t work after flashing the patched boot the tablet doesn’t boot it stuck at Acer logo
Click to expand...
Click to collapse
same problem here

moom999 said:
the patch with Acer_AV043_A700_1.028.00_EMEA_FR doesn’t work after flashing the patched boot the tablet doesn’t boot it stuck at Acer logo
Click to expand...
Click to collapse
Rename Acer_AV043_A700_1.028.00_EMEA_FR to update.zip and put it in an external sd card.
There's a startup mode that installs it automatically, you have to press the left volume+power buttons at startup if I remember well.

alx5962 said:
Rename Acer_AV043_A700_1.028.00_EMEA_FR to update.zip and put it in an external sd card.
There's a startup mode that installs it automatically, you have to press the left volume+power buttons at startup if I remember well.
Click to expand...
Click to collapse
you missunderstand, they mean, when you have 1.028 you cant flash the patched bootloader because they stuck onn boot screen

No problem to flash again Acer_AV043_A700_1.028.00_EMEA_FR or Acer_AV043_A700_1.025.00_EMEA_CUS1
The problem the patch doesn’t work with any of this two rom

moom999 said:
No problem to flash again Acer_AV043_A700_1.028.00_EMEA_FR or Acer_AV043_A700_1.025.00_EMEA_CUS1
The problem the patch doesn’t work with any of this two rom
Click to expand...
Click to collapse
The size of the patched bootloader seems wrong, I guess that's why it's faulty.

OK, so how do we fix this ??
Edit, reflashed with update.zip, so all OK, phew !

Cannot reproduce with Acer_AV043_A700_1.028.00_EMEA_FR !
Just stays at Acer logo with unlocked bootloader and forces me to re-install as update.zip which leaves me without root.

Which Firmware is working ?
Has anybody allready tested with which firmware this method is working and with which not ??

Be careful, same issue on NORMAL french firmware, not the crappy totally unknown one everybody seems to like, so i guess that's it : this patch STUCK YOUR TABLET ON ANY KNOWN FIRMWARE THIS FAR

Okay, so i just tried to push insert the superuser.apk into the Acer_AV043_A700_1.028.00_EMEA_FR file and flashing this, but as i was expecting, it didn't work out... it didn't even install.
edit: i can confirm, that it does neither work with the Acer_AV043_A700_1.028.00_EMEA_FR, nor the Acer_AV043_A700_1.025.00_EMEA_CUS1 !
so, i guess we have to wait for ZeroNull to come up with another way to get this to work.

Flashboot.bat not responding
I unlock my bootloader with Blackthund3r's A510 Bootloader Unlocker v1.0.0 and go the "unlocked" status. Rebooted the tablet, went into the patched-boot folder and ran as administrator "flashboot.bat". The screen displayed a bunch of what looks like gibberish and when I pressed the Enter key, the screen went to :
"Flashing patched boot.img
<waiting for device>
Then the process just sits there and doesn't go any further. Am I missing something in what I am doing?
---------- Post added at 02:27 PM ---------- Previous post was at 02:18 PM ----------
I used Root Checker Pro to verify root and here is what the app displayed:
"Root Access is not properly configured or was not granted.
Superuser Application Status:
Superuser application - version 3.0.7 installed!
(I had downloaded and installed this from the Market after the first attempt failed)
System File Properties for Root Access:
Standard Location
Check Command: ls -l /system/bin/su:
Result: /system/bin/su: No such file or directory
Analysis: File /system/bin/su does not exist.
Standard Location
Check Command: ls -l /system/xbin/su:
Result: /system/xbin/su: No such file or directory
Analysis: File /system/xbin/su does not exist.
Alternative Location
Check Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Check Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status:
SU binary not found or not operating properly
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User:
ADB shell setting for standard access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1"
Anybody got any ideas on what to do next?
Thanks!

You have to reboot into bootloader for the script to work.
But if you had read the comments above, you might have seen, that the described method does not yet work and several people state, that after flashing the Boot.img the device is stuck in boot.
Gesendet von meinem A700 mit Tapatalk 2

Just to be clear : This method specific to A700 does not work at all yet BUT this WORKS PERFECTLY with the A701 patched rom ZeroNull released at the same time
check this post for the a701 patched rom, you don't need to put it on sdcard it includes BAT files to flash it all from bootlader
http://forum.xda-developers.com/showpost.php?p=27742776&postcount=39

Hello jpearn or doanb555,
With which release of the "update.zip" you can restore your Iconia Tab A700 ?
thx

spoque said:
Hello jpearn or doanb555,
With which release of the "update.zip" you can restore your Iconia Tab A700 ?
thx
Click to expand...
Click to collapse
i'm not jpearn or doanb555 but what kind of question is that ? you got only two roms, both are working. what's your point ?

Zopo ZP500 (Libero) ADB Push file, file went back to 0 byte

I use the official root software for this device in the chinese website and this is what i get
Rebooting (1/3) - Continue once device finishes rebooting
╒²╘┌╓╪╞⌠╩╓╗·ú¿╡┌1┤╬ú¼╣▓3┤╬ú⌐- ╟δ╡╚┤²╓╪╞⌠═Ω▒╧ú¼╓«║≤░┤╚╬╥Γ╝ⁿ╝╠╨°
Press any key to continue . . .
Rebooting (2/3) - Continue once device finishes rebooting
╒²╘┌╓╪╞⌠╞╜░σú¿╡┌2┤╬ú¼╣▓3┤╬ú⌐- ╟δ╡╚┤²╓╪╞⌠═Ω▒╧ú¼╓«║≤░┤╚╬╥Γ╝ⁿ╝╠╨°
Press any key to continue . . .
uid=0(root) gid=0(root)
If the id is 0 / root then continue, otherwise ctrl+c to cancel and start over
╚τ╣√╔╧├µ╧╘╩╛╡─id╬¬0╗≥╒▀rootú¼░┤╚╬╥Γ╝ⁿ╝╠╨°ú╗╖±╘≥░┤Ctrl-C▓ó╗╪╕┤Y└┤╚í╧√▒╛┤╬root│ó╩╘
ú¼╚╗║≤╓╪╩╘
Press any key to continue . . .
remount succeeded
1091 KB/s (22364 bytes in 0.020s)
2038 KB/s (2005736 bytes in 0.961s)
1232 KB/s (432931 bytes in 0.343s)
failed to copy 'RootExplorer.apk' to '/system/app/RootExplorer.apk': Read-only f
ile system
Unable to chmod /system/app/RootExplorer.apk: Read-only file system
Unable to chmod /system/app/RootExplorer.apk: Read-only file system
Click to expand...
Click to collapse
IT seems that pushing SU is successful while pushing ROOTEXPLORER.APK files with system read only. Then I try to go to shell and list the size of SU, it is 0 byte. Then I try to push it again, it says system is read only.
Anyone please help me, is this because of my phone problems or is it because of the firmware?

can anyone know why system is read only?

any linux expert can help me?

ZOPO ZP500 Libero 3G WCDMA Android 4.0 ICS Dual Sim 4.0"FWVGA
I found a nice video for zp500:
youtube.com/watch?feature=player_embedded&v=egpanqD4y48

same problem here. It seems to be impossible to mount the system partition as RW...

blubb0211 said:
same problem here. It seems to be impossible to mount the system partition as RW...
Click to expand...
Click to collapse
thanks for confirming, i thought i am the only one having this problem. do you have any clue why this happen to us? is it because of the ICS?

I'm still looking in other threads for information about this specific error.
I read about changing the bootloader, changing the kernel... but I think the main problem is,
that our device is too new, only few people owns a ZP500. THe only way for us is to wait.... :-(
You can try this rom: http://115.com/file/e7jae9ni
it has su preinstalled, but you will get the same problem with Read-only file system.

blubb0211 said:
I'm still looking in other threads for information about this specific error.
I read about changing the bootloader, changing the kernel... but I think the main problem is,
that our device is too new, only few people owns a ZP500. THe only way for us is to wait.... :-(
You can try this rom: http://115.com/file/e7jae9ni
it has su preinstalled, but you will get the same problem with Read-only file system.
Click to expand...
Click to collapse
yeah i tried, that ROM failed in rooting, can't mount RW and copy file.
yeah our phone is too new, I am actually trying various method found on web but all fail. Btw do you know how to put clockworkmod in this device?

when I try to root my ZP500 (Firmware 0702) with different methods (MTK Tools, unlockroot, etc), it still stay half-rooted(
I can not change /system RO permission.
"mount" shows next info about /system :
[email protected] /system ext4 ro,noatime,user_xattr,commit=1,barrier=1,data=ordered,
noauto_da_alloc 0 0
Click to expand...
Click to collapse
Then I flash rooted Vietnam firmware (based on 0702), root is full now. I can freely change /system permission...
But "mount" shows some different info about /system folder:
[email protected] /system ext4 rw,realtime,user_xattr,commit=1,barrier=1,data=ordered,
noauto_da_alloc 0 0
Click to expand...
Click to collapse
Maybe someone clever finds this info useful and help us to made full root access on stock 0702 firmware?

delete chinese, install google apps
I got a ZP500 rooted.
The problem is that it is full of chinese apps (keyboard, 360 mobile safe and many others)
Also I cannot install some google apps (browser, maps)
Do you know a way to uninstall the chinese apps and install google apps?
Sorry to post this at this topic, but I cannot create new topic yet
Regards

Final Steps of Rooting Issue (Using DooMLoRD's root.zip)

Hello
I am new / a noob... [For Below I have highlighted what the issue is in RED on the code part of the issue]
I have looked on this site for three days running. I have made steady progress towards rooting my HTC Sensation XE, as a noob I have download alsorts of unecessary things and misunderstood alot of what is describe but I have done well so far - I believe.
Brief run down of things done:
- Installed all required drivers
- used this awesome guide: http://forum.xda-developers.com/showthread.php?t=1660831][All In One][Guide] How To Root...
- Follwed guide and currently down at Step 2.3 - open extracted zip folder and click runme. thats all. (if experience any daemon hanging problems pls install htc sync and plug in phone so drivers are installed. once done delete htc sync and repeat root procedure) PC will open a cmd screen with prompts that you need to follow. The app does rest... So its nice and easy
Ok so to the point of this thread.
I downloaded DooMLoRD's root.zip doo dar (Lack the correct terminollogy - Im a noob so handicap is allowed)
Extracted all files
Opened up the 'Run Me.exe'
A cmd pops up, with info of preparation before hiting any key.
I hit the any key and below is what I get:
--- STARTING ----
--- WAITING FOR DEVICE
--- creating temporary directory
mkdir failed for tmp, File exists
--- cleaning
rm failed for *, No such file or directory
--- pushing zergRush
1443 KB/s (23060 bytes in 0.015s)
--- correcting permissions
--- executing zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[-] Not a 2.2/2.3 Android ...
--- WAITING FOR DEVICE TO RECONNECT
if it gets stuck over here for a long time then try:
disconnect usb cable and reconnect it
toggle "USB DEBUGGING" (first disable it then enable it)
--- DEVICE FOUND
--- pushing busybox
862 KB/s (1075144 bytes in 1.216s)
--- correcting permissions
--- remounting /system
mount: permission denied (are you root?)
--- checking free space on /system
0 KB/s (439 bytes in 1.000s)
df: /mnt/secure/asec: Permission denied
df: /data/DxDrm/fuse: Permission denied
--- Free space on /system : 87% bytes
test: 87%: bad number
--- NOT enough free space on /system!!!
--- making free space by removing Google Maps
--- copying busybox to /system/xbin/
/system/xbin/busybox: cannot open for write: Read-only file system
--- correcting ownership
Unable to chmod /system/xbin/busybox: No such file or directory
--- correcting permissions
Unable to chmod /system/xbin/busybox: No such file or directory
--- installing busybox
/system/bin/sh: /system/xbin/busybox: not found
--- pushing SU binary
failed to copy 'files\su' to '/system/bin/su': Read-only file system
--- correcting ownership
Unable to chmod /system/bin/su: No such file or directory
--- correcting permissions
Unable to chmod /system/bin/su: No such file or directory
--- correcting symlinks
rm failed for /system/xbin/su, No such file or directory
link failed Read-only file system
--- pushing Superuser app
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only
file system
--- cleaning
--- rebooting
ALL DONE!!!
Press any key to continue . . .
This restarts my phone but nothing else.
I have the su apps on my phone, I have root explorer too.
I've looked in the \system\bin and \system\xbin for an su or something titled su or su binary
Can't find anything so I am worried about that. - does my phone have an su?
Also from the code above it mentions 'cannot open for write: read-only file...' how do I change this if this is the source of the problem?
If not, further down it mentions not being able to copy 'superuser.apk' over - do I remove this from the extracted files and replace with a current version?
Please can you experts help me out - I have searched the forums but they only resolve other makes / models.
Additional info is I didn't S-OFF as I couldn't understand what to do, but skipping that step I still got this far so unsure if I needed it.
I appolagise for the lengthy post but it should help shortlist possible problems down abit.
Thanks for reading.

Dude the guide u used is for sensation xl and it is not suitable for sensation/xe/4g
Basicly I think u want to root it phone so plzz give the bootloader info
Arey u unlocked bootloader?
Hboot?
Etc if u hve unlocked your bootloader
Thn install a custom recovery and install su.app for details search at development sectors of HTC sensation
U can use sensation files for HTC sensation/xe/4g but cannot use sensation xl files
HIT THANKS IF I HVE HELPED YOU
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
U may also get some hlp.from here
http://forum.xda-developers.com/showthread.php?t=1631861
HIT THANKS IF I HVE HELPED YOU

shrex said:
Dude the guide u used is for sensation xl and it is not suitable for sensation/xe/4g
etc....
Click to expand...
Click to collapse
Whilst waiting for a reply I had a browse through the search again and realised exactly what you told me.
used HTCdev and I am unlocked via bootloader.
so if I can't use DooMLoRDs stuff I decided to find others.
I found this: http://forum.xda-developers.com/showthread.php?t=1497404
I download his zip but not doing anyhting yet.
All i bloody want to do is customise system sounds and its insane how much you gotta do just to get it haha. But yeah I just need it rooted and an updated su so I'll go ahead with the above downloaded zip and I'll see what happens.
Thanks for replying you were helpful appreciate it

The link wch u hve mentioned is grt u can go ahead with that but b sure u read everything n fill the prerequisites
HIT THANKS IF I HVE HELPED YOU

[Q] HTC Inspire 4G Not installing CWM or SU

HTC Inspire 4G - AT&T
Android - Stock GB 2.3.5 + HTC Sense 3.0
Build - 3.20.502.52
PC OS - Windows XP Pro SP3
Method - Easy Ace Root Tool
Noob - Yes
Problem - Bootloader unlock successfully achieved, but installation of BusyBox, Clockworkmod, and SuperUser interrupted during process.
Text from Post-Unlock on shown below. Trouble Areas Colored Red
Summary of Problem according to Tool - "Parameter Format not correct," "Read-Only file system," and "No such file or directory"
USB Debugging and Unknown Sources enabled when errors occur
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
< waiting for device >
sending 'recovery' (3554 KB)... OKAY [ 0.641s]
writing 'recovery'... OKAY [ 0.953s]
finished. total time: 1.594s
rebooting...
finished. total time: 0.297s
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Make sure that USB debugging is enabled and charge only is set as default
Achieving Temp Root
cannot stat '/tools/tmp/fre3vo': No such file or directory
Unable to chmod /data/local/tmp/fre3vo: No such file or directory
/data/local/tmp/fre3vo: not found
Pushing Busybox, SU and Superuser
1 KB/s (536 bytes in 0.312s)
1829 KB/s (380532 bytes in 0.203s)
1906 KB/s (1372660 bytes in 0.703s)
Trying to gain Perm Root
mount: permission denied (are you root?)
/system/xbin/busybox: cannot open for write: Read-only file system
Unable to chmod /system/xbin/busybox: No such file or directory
Unable to chmod /system/xbin/busybox: No such file or directory
/system/xbin/busybox: not found
failed to copy 'tools\su\su' to '/system/bin/su': Read-only file system
failed to copy 'tools\su\Superuser.apk' to '/system/app/Superuser.apk': Read-onl
y file system
Unable to chmod /system/bin/su: No such file or directory
Unable to chmod /system/app/Superuser.apk: No such file or directory
Unable to chmod /system/bin/su: No such file or directory
rm failed for /system/xbin/su, Read-only file system
link failed Read-only file system
FIND: Parameter format not correct
rm failed for EasyAceRoot.cmd, No such file or directory
Perm Root achieved...

I too am looking for the answer. I'll edit this post if I find something

If CWM would install, that wouldn't be a problem
Scozzar said:
I too am having this issue at the moment. The bootloader is unlocked, but I will not get perm root, even though it says it was achieved...
EDIT: Turning off Fastboot yields different results. But still no SuperSU.
EDIT2: I GOT IT! Basically, I downloaded the latest SuperSU .zip off XDA, put it on the phone, then flashed it in CWM. SuperSU now appears as an app!
Click to expand...
Click to collapse
I'll try turning off fastboot, but I can't get CWM to install at the moment either. SuperSU and Busybox also can't install.
Again, I'll try turning fastboot off and see how it behaves.

Prestige0813 said:
I'll try turning off fastboot, but I can't get CWM to install at the moment either. SuperSU and Busybox also can't install.
Again, I'll try turning fastboot off and see how it behaves.
Click to expand...
Click to collapse
What have you done? Also, you can't turn off fastboot; it's a mode selected from the bootloader. Do you mean ADB? Turning that off won't do anything either, other than making your phone's system inaccessible from the computer.

Scozzar said:
Fastboot, as in the check box in the stock ROM. You can't get into bootloader with it on. Also, if I was able to flash a new ROM, does that mean busybox is installed?
Click to expand...
Click to collapse
Depends on the ROM.

Scozzar said:
V2 Oxygen JB is what I'm using.
Click to expand...
Click to collapse
Er, I don't know for every ROM. If it's a custom ROM, probably. If you're rooted (and again, if you're using a custom ROM, you probably are), you can always install it from the play store.

Update:
First off, I've already downloaded the SuperSU App from Google Play, and it's failed to obtain root abilities, so a perm root is not being acheived.
Also, I've downloaded the latest SuperSU via PC, and it's ready to go once I manage to successfully install CWM (however, if the Ace Root Kit succeeds, then using CWM to install root isn't a needed method)
I've tried continuing the process with the Fastboot setting disabled, and I didn't see any difference in the end result. It seems that recovery is successfully written, but it doesn't succeed in installing SuperSU, CWM, or busybox.
On another note, I've downloaded the busybox installer app from Google Play, and it states the phone is rooted; but runs into errors when I attempt to install (regardless of the version I select). I've run two root checking apps, and both say that the phone is not rooted.
In short, All I've been able to achieve is getting the Boot Loader unlocked.

Can you flash recovery manually from fastboot?

New Update
I just found that CWM is in fact installed. I did not realize until just now that from the HTC bootloader I had to select recovery to access it.
I placed the SuperSU.zip on the phone and installed it via CWM, as scozzar had suggested, and the phone is now rooted (verified by two root checking apps)!
From there I installed busybox via Google Play with no hiccups.
I apologize for not trying this sooner I hope that others find success. The Inspire's a great phone, and now I've made mine even better!

Yess
bananagranola said:
Can you flash recovery manually from fastboot?
Click to expand...
Click to collapse
Yes! here is the tutorial
1- Download Android.zip and unzip it
2- make a folder called "Android" in C:/ like that: C:/Android.
3- put inside of the folder Android the files: adb.exe, fasttboot.exe, AdbWinApi.dll and the recovery.img
4- go to cmd and write:
cd \Android
fastboot flash recovery recovery.img
READY! now you have a CWM Recovery
Sorry for my bad english

[SOLVED]Need file System/bin/debuggerd for 4.4.2 update

i need this file System/bin/debuggerd from the 4.4.1, i tried using the krt16m stock image, used this to extract it and get the debuggerd file, used es file explorer and even total commander to replace it, change its permissions to chmod 755 and root shell, but this ota just doesn't install, in twrp still getting error debuggerd file problem, i use stick mount and i dont know why but i deleted the debuggerd.backup file:crying::crying::crying:
Update: I used this which I extracted from 4.4.2 odexed rom from here, I can confirm it is working, just check the sha1sum which should be 1A008709F0945E8EACA2166D143622EB8D94C3D0
Also i used adb commands to push the file from here

Hi,
If that helps: https://www.dropbox.com/s/eu2x01fkr11x9rh/debuggerd.
Don't forget to set the correct permissions, like this:

viking37 said:
Hi,
If that helps: https://www.dropbox.com/s/eu2x01fkr11x9rh/debuggerd.
Don't forget to set the correct permissions, like this:
Click to expand...
Click to collapse
Thanks a lot for the quick reply, it still doesnt work, i dont freaking undrerstand what the problem is, i double checked the md5 checksum through adb command even of the file, it matched but it the ota still shows
"system/bin/debuggerd" has unexpected contents.
E:Error in /tmp/update.zip
(status 7)
Installation aborted

imrock said:
i need this file System/bin/debuggerd from the 4.4.1, i tried using the krt16m stock image, used this to extract it and get the debuggerd file, used es file explorer and even total commander to replace it, change its permissions to chmod 755 and root shell, but this ota just doesn't install, in twrp still getting error debuggerd file problem, i use stick mount and i dont know why but i deleted the debuggerd.backup file:crying::crying::crying:
Update: I used this which I extracted from 4.4.2 odexed rom from here, I can confirm it is working, just check the sha1sum which should be 1A008709F0945E8EACA2166D143622EB8D94C3D0
Also i used adb commands to push the file from here
Click to expand...
Click to collapse
Thank you, it works! Although I had the debuggerd.backup file, renamed it to debuggerd and still failed. But with your file, I upgrade to 4.4.2 successfully. BTW, I use Root Explorer to change the right.