Hi everyone.
First of all I must say I've searched in this forum before I decided to ask here but I haven't seen anything clear so please accept my apologies if this was already answered. Also my English is not really good.
So this is my question, How can I unroot my Iconia A510??? I need to send it back to the Official Service to be checked.
I used this method to root: http://forum.xda-developers.com/showthread.php?t=1531646
Thanks a lot
You have to flash a stock rom to achieve this. In the following post you can view any version of the stock ROM list. You should notice that not every version is available for download, though any of them should do the job:
http://forum.xda-developers.com/showpost.php?p=27816722&postcount=2
After downloading one of the stock ROMS, rename the .zip file to update.zip, put it in the root of your A510 and then press the volume down button (with the 2 dots) and press the power on switch.
Thanks to nikagl
(Devvers, isn't it also possible to only keep a stock bootloader.blob in the update.zip and than flash it? Or will it only lock the bootloader? Or will it give an error (most likely)?)
Ey, thanks a lot for your fast reply!!
Unfortunately at the moment my A510 has this stock rom "Acer_AV041_A510_1.044.00_WW_GEN1" and it's not avaliable to download :-(
-Do you know If I install another rom it will work?
-Would I lose my guarantee if I change the rom?
-Could I install a lower version and then use the automatic update to go back to the current version?
Sorry for all these questions but I'm in a kind of a hurry trying to take my tablet to the after-sales TS.
Thanks again
The most popular method of rooting the A510 uses the A100 mempodroid exploit. To remove it, you can follow the A100 unrooting instructions in this post:
http://www.acertabletforum.com/foru...g-iconia-a100-made-easy-method.html#post28361
Note that for A510, I think busybox was placed in xbin while su was placed in bin. But the instructions should be pretty much similar.
If you also have custom recovery, it's more tricky to remove that.
Warning: Please make sure that you are using the mempodroid exploit.
You're welcome!
I have had that too with my A700, so I flashed a beta ROM instead. I sent it back with the beta ROM installed and just got a brand new one device back. You could ask on the forum here if anyone could upload the stock ROM "Acer_AV041_A510_1.044.00_WW_GEN1", but trust me, you're lucky if someone will take the time to do that.
Now to answer your questions:
- Yes. It works.
- They're probably not going to even check if you're rooted or having another ROM installed. If unlocking the bootloader voids warranty, then yes. Are they able to see if you've ever unlocked the bootloader, most likely not.
- Depends. If an update has been released by Acer, then yes. If not, then no. But probably not.
You could also try the method mentioned by the user above me (I'm having an A700, so I'm not that familair with the rooting methods with the A510. My apologies.).
Edit:
By the way, flashing a new ROM will of course remove all of your files and settings, so beware.
firstly.... good evening to all,ive been a casual observer of xda for a few years now and have chosen to sign up for a niggling qiestion! i have n Sony Xperia E (c1505) single sim and just wondering how safe(ish) is frammaroot and which version is the best to use? my device is as follows:
model number c1505
android version 4.1.1
baseband 76xxu-usnskolym-2540
kernel version 3.4.0-perf
build number 11.3A.0.59
at the moment its telling me an update is ready which will make the build number up to 11.3.A.2.23...
i dont wish to update yet if i can get away with using frammaroot,also im sure i read somewhere that the update will erase root access (will cross that bridge when i come to it) ive flashed roms before so not really interested in that side of things,mainly just adblocking and removing some of the google junk!! i have done a search on here but with so many threads relating to it i hope this is just a simple question although a long post!!
you can use cydia impactor to root it after you update
link to it: http://www.cydiaimpactor.com/
if it doesn't work for you, you can also flash the old 11.3A.0.59 kernel with flashtool, root it with framaroot apk and then flash the 11.3.A.2.23 kernel again.
both methods are pretty safe if you follow instructions and even if something goes wrong (again, pretty impossible) you can just fix the phone with Sony pc companion.
here's a small guide by another member on how to do the kernel flashings with flashtool and root: http://forum.xda-developers.com/showthread.php?t=2409525
-Ric- said:
you can use cydia impactor to root it after you update
link to it: http://www.cydiaimpactor.com/
if it doesn't work for you, you can also flash the old 11.3A.0.59 kernel with flashtool, root it with framaroot apk and then flash the 11.3.A.2.23 kernel again.
both methods are pretty safe if you follow instructions and even if something goes wrong (again, pretty impossible) you can just fix the phone with Sony pc companion.
here's a small guide by another member on how to do the kernel flashings with flashtool and root: http://forum.xda-developers.com/showthread.php?t=2409525
Click to expand...
Click to collapse
thank you sir,yes ive seen cydiaimpactor also another one i was thinking about,i was really trying to avoid any flashing but i was unaware of fixing any problems via sony pc companion,what are its limitations as in if i completely mess it up would that do all the hard work for me so to speak,i dont really want to change any effect it would have on the other apps for example the facebook app and notifications etc?
also i see many have used it but cant seem to find a tut for it? also the links on the mentioned thread are all 404's
whisker56 said:
thank you sir,yes ive seen cydiaimpactor also another one i was thinking about,i was really trying to avoid any flashing but i was unaware of fixing any problems via sony pc companion,what are its limitations as in if i completely mess it up would that do all the hard work for me so to speak,i dont really want to change any effect it would have on the other apps for example the facebook app and notifications etc?
Click to expand...
Click to collapse
Rooting is very safe. Even if you mess up and the phone is unbootable, Sony PC Companion will 1-Click restore your phone to a working state. There is always the change of hardware-breaking your phone but you have more chance of winning the lottery.
You can also easily un-root using the same tool so any problems found after rooting can easily be rectified. Another benefit of rooting is the ability to install a recovery manager (I recommend CWM) which will allow you to fix most problems with the device if something goes wrong at a later stage. (You can also install a custom ROM but thats a whole other discussion)
If you would like some more information then send me a PM or leave a reply.
If I helped then please leave me a "thanks"
-James
deadwarrior63 said:
Rooting is very safe. Even if you mess up and the phone is unbootable, Sony PC Companion will 1-Click restore your phone to a working state. There is always the change of hardware-breaking your phone but you have more chance of winning the lottery.
You can also easily un-root using the same tool so any problems found after rooting can easily be rectified. Another benefit of rooting is the ability to install a recovery manager (I recommend CWM) which will allow you to fix most problems with the device if something goes wrong at a later stage. (You can also install a custom ROM but thats a whole other discussion)
If you would like some more information then send me a PM or leave a reply.
If I helped then please leave me a "thanks"
-James
Click to expand...
Click to collapse
cheers james yes have used cwm to dump a custom rom on my galaxy-y,i dont really want new rom as im happy with its features as it is and i only got it on saturday lol! ive tried to find a guide on how to use Cydia Impactor,if you could furnish me with a simple tut it would bemore than appreciated... i always hit thanks because every little helps
Use UnlockRoot , Framaroot is detected as Malware both by phone and PC
fonetalker101 said:
Use UnlockRoot , Framaroot is detected as Malware both by phone and PC
Click to expand...
Click to collapse
thanks but i dont want to have to pay for it!
Pay? You don't need the pro version, There is a free version, you could also Try DoomLord's version or SUper One Click. Just remember Rooting is by your own liking if your phone gets bricked don't put the finger at me
fonetalker101 said:
Pay? You don't need the pro version, There is a free version, you could also Try DoomLord's version or SUper One Click. Just remember Rooting is by your own liking if your phone gets bricked don't put the finger at me
Click to expand...
Click to collapse
thanks all for your help have done it by framaroot 1.4.1 and allis well and no pointing fingers just a..... cruise missle!!
Hello
(sorry for my english)
I'm a noob in this world and i need some help.
In the past few days i've been reading a lot of posts in this forum but to a noob it's a little bit hard to understand somethings.
So, i'm using this topic to ask some questions. If there is another thread that answer all my questions and explain things for a newbie, feel free to tell me and apologize to create this new thread.
I have a smartphone android, Galaxy S2 with android 4.1.2, all locked to the provider (I know that there is a specific forum for this smartphone and i read some threads).
Now, i want to make it a ROOT and maybe try new ROM's.
Let's start with the questions:
-To make a root, it's better with kernel exchange or with a simple file?
-In the future, if i want to install another ROM, having the root made from the kernel that is with the phone (using a file in the SD Card) may cause some problems? To do this it's better to go to root insecure kernel?
-Why i need to change kernel? which is the benefits?
-It's possible to restore to the previous kernel?
-What are necessary to backup the ROM that actually i have?
-Changing one time the kernel, i can install all the roms i want or i need to install another kernel's?
Thank you for your atention, and one more time, sorry for my english!
@pedrocrv,
Your English is fine! Don't worry about that, man.
Here is my opinion.
Generally speaking, you don't need to replace your kernel. Replacing the kernel can both drastically change your device's performance for the better, as well as render your device completely unusable, which in Android terminology is called "bricked". If your device is "bricked", it is completely useless as an electronic device, making it nothing more than a brick.
But to get back on topic, it's normally only developers like myself who need to replace the kernel, and even then only every once in a while. It's somewhat unsafe for new users, because one little mistake can lead to a huge problem. Trust me, I've seen them here on XDA myself. Don't become one of them.
However, using and flashing ROMs is a whole different story. ROMs normally change aesthetic parts of your device, like the look and features. If you follow the instructions given to install the specific ROM very well, it is practically impossible to brick your device.
If you find a good ROM, go for it. It's almost definitely going to change your device in a very good way.
So to wrap up this post, basically (for you):
Replace the kernel = bad idea, don't do it until you have more experience
Install/flash a ROM = a great idea, go for it if you find a nice one!
The most important thing to remember, however, is to m a k e a b a c k u p. Once you make a backup, you can mod your system however you want without fear of bricking.
Hope this helps.
@thenookieforlife3
Thank you for your explanation!
I understand what you said, but in one thread of my smartphone i see a lot of people talking about rooting their phones but for this is needed to use another kernel.
I want to root my device, and in a near future maybe install one ROM of CyanogenMod (and try others too), but i'm afraid of rooting because that story of changing the device kernel and using Odin... I don't want a brick
Another question:
If i find a file to root my device without Odin, but i don't have the 100% that it's the file indicated for my device, there is some problem if I try to root with that?
And, as i see, there is some diferent files, how i choose one? it's indifferent or one file have specific itens that another don't have?
Thanks a lot!
pedrocrv said:
@thenookieforlife3
Thank you for your explanation!
I understand what you said, but in one thread of my smartphone i see a lot of people talking about rooting their phones but for this is needed to use another kernel.
I want to root my device, and in a near future maybe install one ROM of CyanogenMod (and try others too), but i'm afraid of rooting because that story of changing the device kernel and using Odin... I don't want a brick
Another question:
If i find a file to root my device without Odin, but i don't have the 100% that it's the file indicated for my device, there is some problem if I try to root with that?
And, as i see, there is some diferent files, how i choose one? it's indifferent or one file have specific itens that another don't have?
Thanks a lot!
Click to expand...
Click to collapse
like Thenookieforlife3 said you do not need a kernel, you dont need one to root or install roms/custom recovery's, they are just for tweaking things or being able to overclock. So, first of all, you are going to have to tell us your model number (or which carrier your phone is on) so we can direct you to the right root guide, s2's are fairly easy to root so dont be scared we will hold your hands the entire way!
Trozzul said:
like Thenookieforlife3 said you do not need a kernel, you dont need one to root or install roms/custom recovery's, they are just for tweaking things or being able to overclock. So, first of all, you are going to have to tell us your model number (or which carrier your phone is on) so we can direct you to the right root guide, s2's are fairly easy to root so dont be scared we will hold your hands the entire way!
Click to expand...
Click to collapse
This. ^
We can definitely give you a hand, but we do need a few details to make sure everything works out.
hello again!
@Trozzul and @thenookieforlife3,
Thank you!
So there is the information asked for: (see the attachment for more details)
Bandbase: I9100BULS1
Kernel: 3.0.31-889555 [email protected] #3 SMP PREEMPT Thu Jan 31 14:48:54 KST 2013
Compilation Number: JZO54K.I9100XWLSD
I have another questions to do:
-What vary from file to file on root?
-What is a AOSP ROM? Where I can find a rom that is almost empty of trash, like i think it is a Stock Rom?
-In the information given above, wich is more important to see if I can install that rom? Can I install a rom that is not XWLSD?
Many thanks!
Answers to your questions are in red.
Thank you! You're very welcome!
So there is the information asked for: (see the attachment for more details)
Bandbase: I9100BULS1
Kernel: 3.0.31-889555 [email protected] #3 SMP PREEMPT Thu Jan 31 14:48:54 KST 2013
Compilation Number: JZO54K.I9100XWLSD
I have another questions to do:
-What vary from file to file on root? Normally not much changes from root method to root method - basically, if anything does, it's negligible to you, meaning that it won't really matter. What does matter is that the root method actually roots your phone.
-What is a AOSP ROM? ASOP stands for Android Open Source Project, and it pretty much means that it's a ROM that is as minimalistic and "free of trash", as you say, as you can get it.
-Where I can find a rom that is almost empty of trash, like i think it is a Stock Rom? Here are a few good ones:
AOSP NeatROM for S2
CarbonRom KitKat for S2
SuperNexus for S2
-In the information given above, which is more important to see if I can install that rom? Can I install a rom that is not XWLSD? The ROMs that you can install will be labelled "S2" and "I9100". Don't try to install any other ROMs unless they have those labels.
Hope these help!
I understand what you said!
For example, the AOSP NeatROM have a version that is not AOSP. What it means?
To Install other ROM's i need to root first?
And now, how i simply root by a file?
@pedrocrv,
Answers to your questions in red.
For example, the AOSP NeatROM have a version that is not AOSP. What it means? That means that there is another version of that ROM that is more full of extra features, a.k.a "trash".
To Install other ROM's i need to root first? Yes.
And now, how i simply root by a file? It depends from method to method - some methods are apps that you install and then hit a "big red button", some methods are files that you have to flash through a custom recovery, for example, ClockworkMod. Basically, just read and follow the instructions that come with each root method.
again, thank you!
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done?
how I know that i need a custom recovery? mine doesn't work?
what is flashing?
Thank you for your attention!
@pedrocrv,
Once again, answers to your questions in red.
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done? Yes, that's right.
how I know that i need a custom recovery? mine doesn't work? The rooting method will tell you in the instructions whether or not you need a custom recovery, and if it does, it will tell you which one to use and how to use it.
what is flashing? Simply put, flashing is installing a file (normally a .zip) that has been specially formatted via a recovery method (custom or stock).
Thank you for your attention! No problem!
thenookieforlife3 said:
@pedrocrv,
First, please make sure to hit "Thanks" on each of my helpful posts.
Once again, answers to your questions in red.
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done? Yes, that's right.
how I know that i need a custom recovery? mine doesn't work? The rooting method will tell you in the instructions whether or not you need a custom recovery, and if it does, it will tell you which one to use and how to use it.
what is flashing? Simply put, flashing is installing a file (normally a .zip) that has been specially formatted via a recovery method (custom or stock).
Thank you for your attention! No problem!
Click to expand...
Click to collapse
im sure we should introduce him to cyanogenmod, cyanogenmod can be more stock than Asop most of the time, Asops nice but there are most of the time little additions that the creator likes, plus if cyanogenmod installer is compatible for your device he shouldn't have todo much!
@pedrocrv , im not trying to steal his thunder but im trying my best to explain it to you too if he left anything out, otherwise if you guys want me to i will back out .
Custom recovery's are basically a way of getting out of a bad spot and being able to Flash new Roms, if you get stuck in a bootloop (stays stuck at the samsung screen for a very long time, the first time you flash a rom you should let it sit for it can take awhile for the first time you turn it on.) you can most likely get out of the problem and be able to backup your stock firmware if you decide you dont like rooting/custom roms, it does stuff the Stock recovery does not do.
Flashing is basically as thenookieforlife3 said its so you can install Roms, when you hear the term flashing think "installing".
@Trozzul and @thenookieforlife3,
Thank you for both atention! i'm learning a lot of things with both of you!
I know cyanogen, and as i search in the wiki of cyanogen page i think my phone is compatible.
What I need to do with the installer? And if i use the installer, how I backup my actual ROM to future problems or needs to come to origins?
stock ROM-> My actual ROM?
Custom ROM-> a new one
So, if i understand everything:
With my actual recovery i'm not able to install other ROM's. But, with my recovery, i'm able to root my device unless the root method needs a custom recovery and it say's how to install it right?
With the root by my recovery, i'm able to install other ROM's but I will need to further install a custom recovery right?
Many thanks :good:
pedrocrv said:
@Trozzul and @thenookieforlife3,
Thank you for both atention! i'm learning a lot of things with both of you!
I know cyanogen, and as i search in the wiki of cyanogen page i think my phone is compatible.
What I need to do with the installer? And if i use the installer, how I backup my actual ROM to future problems or needs to come to origins?
stock ROM-> My actual ROM?
Custom ROM-> a new one
So, if i understand everything:
With my actual recovery i'm not able to install other ROM's. But, with my recovery, i'm able to root my device unless the root method needs a custom recovery and it say's how to install it right?
With the root by my recovery, i'm able to install other ROM's but I will need to further install a custom recovery right?
Many thanks :good:
Click to expand...
Click to collapse
Yes your stock rom is what the device comes with when you buy it. every device method of being able to get custom roms is different, so when you do get a new phone always do your research, sometimes you can root it and dont need a custom recovery (thats only if you want to stay on stock rom) sometimes you need a custom recovery to get root. with my S2 what i needed todo was get a custom recovery first, installing cyanogenmod already comes rooted so you can make a backup of your stock rom without rooting it.
so i dont also exactly know which device you have, where are you from? it looks spanish in your phones setttings with that screenshot, region is important. is it a GT-i9100 or a GT-i9100b? take out the battery and tell us what the model number says there. this is important for the cyanogenmod installer.
Trozzul said:
Yes your stock rom is what the device comes with when you buy it. every device method of being able to get custom roms is different, so when you do get a new phone always do your research, sometimes you can root it and dont need a custom recovery (thats only if you want to stay on stock rom) sometimes you need a custom recovery to get root. with my S2 what i needed todo was get a custom recovery first, installing cyanogenmod already comes rooted so you can make a backup of your stock rom without rooting it.
so i dont also exactly know which device you have, where are you from? it looks spanish in your phones setttings with that screenshot, region is important. is it a GT-i9100 or a GT-i9100b? take out the battery and tell us what the model number says there. this is important for the cyanogenmod installer.
Click to expand...
Click to collapse
No i'm from portugal
so:
Model: GT-I9100
SSN:-I9100GSMH
Wich is the diference?
pedrocrv said:
No i'm from portugal
so:
Model: GT-I9100
SSN:-I9100GSMH
Wich is the diference?
Click to expand...
Click to collapse
There's very little difference between the i9100 and the i9100b, but the difference is enough that there is a separate CyanogenMod installer for both models.
thenookieforlife3 said:
There's very little difference between the i9100 and the i9100b, but the difference is enough that there is a separate CyanogenMod installer for both models.
Click to expand...
Click to collapse
@thenookieforlife3 i think the cyanogenmod installer installs a CWM right for his question on it? also look at these stated on the Cyanogenmod wiki for the GT-i9100
WARNING:
Some second-generation Samsung Exynos devices are potentially susceptible to a "superbrick" caused by performing a factory reset with the stock kernel, which effectively kills the internal memory in the device. It is highly recommended you do not perform this operation while using a stock kernel for safety reasons. To make sure you aren't running the stock kernel (only needed when coming from the stock ROM), fully install CM without performing a factory reset and reboot to recovery before you perform the factory reset.
WARNING:
If you used a non-official method to remove a provider lock, your /efs partition may become corrupt! It is highly recommended you make a backup of this for safe keeping before attempting to modify your device, especially if you plan to remove such a lock.
WARNING:
The newest Gapps package (20140606) is too big for the /system partition of i9100. Please use the 20140105 package instead. This message will disappear when this is resolved.
Click to expand...
Click to collapse
Should we tell him to run a benchmark and tell us his CPU?
@pedrocrv (Edit:https://play.google.com/store/apps/details?id=com.antutu.ABenchMark download this app real fast and tell us what CPU you have) so the cyanogenmod installer will be the easiest thing for you, even though installing a custom rom is insanely easy this is basically a one click method, note that all of your data will be deleted so back that up somewhere where you can save it and put it on your phone when its done installing. so as i asked thenookieforlife3i believe that the cyanogenmod installer will also install the latest and best custom recovery for you (CWM: Clockworkmod will be a huge term like CM: Cyanogenmod you will hear a lot, they are both very popular for being the most stable.) it would be stupid enough for it not to install it as well, but if it does not we will show you an easy app that will install a custom recovery, basically one click just like cyanogenmod. now as i looked on the cyanogenmod site, the installer IS compatible with your phone and will install a Stable version of Cyanogenmod 10.2 which is android 4.3. note that the highest right now is CM 11 which is android 4.4.4 kit kat but right now is what we call a "Nightly".
i will try my best to explain this to you, there are four stages that cyanogenmod puts out i will rate them from lowest to highest: "experiments" "snapshot" "nightly" and "Stable", you only need to worry about nightly and stable, Stable is basically the final product the last update for that android version so its the most stable and with less bugs and this is what you want to aim for, Nightlys are Nightly generated updates that update bugs every night asked by people like us to be fixed, Honestly Nightlys are Very stable and are perfectly fine.
Now you might like Cyanogenmod 10.2, personally a lot of my phones run 10.2 if its available, you might like kit kat (Cyanogenmod 11) better instead, honestly try out 10.2 first and if you dont like it, you can update to Cyanogenmod 11 (they push updates out like how samsung would push out updates.) without deleting your information on CM 10.2, im sorry if i confused you at all please ask a lot of questions if needed!
Trozzul said:
@thenookieforlife3 i think the cyanogenmod installer installs a CWM right for his question on it? also look at these stated on the Cyanogenmod wiki for the GT-i9100
Should we tell him to run a benchmark and tell us his CPU? …
Click to expand...
Click to collapse
Yes, installing CyanogenMod installs ClockworkMod as the default recovery.
Yes, let's have him run a benchmark and tell us the results.
@thenookieforlife3 and @Trozzul
Again, thank you for your patience!
I'm now running the benchmark!
Let's put new question's..
-With CM 10.2, it comes with root, and how to unlock the SIM?
-With CM 10.2, in wich phase of the installation I will be able to backup my stock ROM?
-Imagine that after sometime I want to go back to my stock ROM, What I need to do, because i will have another recovery?
-WIth the CM 10.2 I will have my RAM memory more free?
In the attachment are the images of the test
thank you again!
Pedro
@pedrocrv,
As always, answers to your questions in red.
-With CM 10.2, it comes with root, and how to unlock the SIM? @Trozzul, if you'd please answer this question, that would be great, because I don't know much about SIM unlocking.
-With CM 10.2, in wich phase of the installation I will be able to backup my stock ROM? You will want to make a Nandroid backup before you do anything at all in relation to rooting and CyanogenMod.
-Imagine that after sometime I want to go back to my stock ROM, What I need to do, because i will have another recovery? You will use either the "Install update from SD card" or the "Install .zip from SD card" feature. I don't know exactly, but if that time comes, please let me know and I'll do the research necessary to help you out.
-WIth the CM 10.2 I will have my RAM memory more free? It all depends on what apps you have running at one time. I personally use Advanced Task Killer Free to kill apps directly after I'm finished using them, and that frees up a lot of RAM. CM probably overall will make your RAM memory less free, but if you use the app killing trick, you won't ever have a problem with it.
In the attachment are the images of the test Great, thank you for doing that.
Hello, this is my first post on XDA forums so take it easy on me. Recently I've started taking interest in rooting my Xperia Z5. However I don't really know much at all about Linux, and I've never rooted an android device before. I am actually a coder, in fact I'm using a laptop with a HEAVILY modded version of Win10, and with several apps of my own. I've only recently, about a few months ago, bought a decent android phone. I got the Xperia Z5 off eBay for a good price, brand new for a couple hundred bucks. I'm interested in slowly learning basic coding and hacking on android, so I figured I'd go with the first major step and getting it rooted so I can actually mod the thing. The operating system is nice, doesn't have much bloatware, but I'd like to flash a new ROM on it. I've dug around a bit, and I've seen a few root and flash methods, but I really don't have any idea which one is trusted, or which would be the most stable option. I figured my best option would be to signup here, and ask for some advice. I saw ROMX here on the forums, and it looked very promising. But since I'm new to all this, I thought it would be wise for me to ask for advice on where to start what what would be a good rom to flash. I have the E6603 Model, Android 6.0.1, with the April 1, 2016 security patch. And yes, I do fully understand the risks and dangers as well as security concerns of rooting, and flashing. But to be honest, I probably do far more dangerous things on a weekly basis. I thank you all for your time, any help is appreciated.
spynathan said:
Hello, this is my first post on XDA forums so take it easy on me. Recently I've started taking interest in rooting my Xperia Z5. However I don't really know much at all about Linux, and I've never rooted an android device before. I am actually a coder, in fact I'm using a laptop with a HEAVILY modded version of Win10, and with several apps of my own. I've only recently, about a few months ago, bought a decent android phone. I got the Xperia Z5 off eBay for a good price, brand new for a couple hundred bucks. I'm interested in slowly learning basic coding and hacking on android, so I figured I'd go with the first major step and getting it rooted so I can actually mod the thing. The operating system is nice, doesn't have much bloatware, but I'd like to flash a new ROM on it. I've dug around a bit, and I've seen a few root and flash methods, but I really don't have any idea which one is trusted, or which would be the most stable option. I figured my best option would be to signup here, and ask for some advice. I saw ROMX here on the forums, and it looked very promising. But since I'm new to all this, I thought it would be wise for me to ask for advice on where to start what what would be a good rom to flash. I have the E6603 Model, Android 6.0.1, with the April 1, 2016 security patch. And yes, I do fully understand the risks and dangers as well as security concerns of rooting, and flashing. But to be honest, I probably do far more dangerous things on a weekly basis. I thank you all for your time, any help is appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/xperia-z5/general/guide-rooting-unlocking-bootloader-t3354307
there is this which i followed to root my Z5 but with marshamall you do have to have a unlocked bootloader so you can use systemless root, it isnt neccisary to downgrade and backup your DRM but it is advised since sony doesnt seemingly like wanting to repair phones with missing DRM
basic how to:
- Download flashtool and a FTF of your choice
- use flashtool the extract the kernel.sin using tools > sin extractor (you will have to open the FTF file in winrar or something like to copy it)
~ you should get a kernel.elf when extracted
you can then use rootkernel to repack the kernel with a recovery menu like twrp and also disable some system verification stuff that will prevent things from working or the phone booting
this is when you need a unlocked bootloader
- from there you can flash your kernel and boot the device and flash superSU systemless (from the recovery menu )unless you havent downloaded that already
~ you can get to the recovery menu by pressing volume up while the yellow LED shows up on the bootsplash
i may have missed some stuff but that guide I linked has everything i explained here ^ this above is how ive rooted my phone and re-rooted when needed
Envious_Data said:
http://forum.xda-developers.com/xperia-z5/general/guide-rooting-unlocking-bootloader-t3354307
there is this which i followed to root my Z5 but with marshamall you do have to have a unlocked bootloader so you can use systemless root, it isnt neccisary to downgrade and backup your DRM but it is advised since sony doesnt seemingly like wanting to repair phones with missing DRM
basic how to:
- Download flashtool and a FTF of your choice
- use flashtool the extract the kernel.sin using tools > sin extractor (you will have to open the FTF file in winrar or something like to copy it)
~ you should get a kernel.elf when extracted
you can then use rootkernel to repack the kernel with a recovery menu like twrp and also disable some system verification stuff that will prevent things from working or the phone booting
this is when you need a unlocked bootloader
- from there you can flash your kernel and boot the device and flash superSU systemless (from the recovery menu )unless you havent downloaded that already
~ you can get to the recovery menu by pressing volume up while the yellow LED shows up on the bootsplash
i may have missed some stuff but that guide I linked has everything i explained here ^ this above is how ive rooted my phone and re-rooted when needed
Click to expand...
Click to collapse
Awesome thanks! I'll try it first thing tomorrow after work.
Ok so I've gotten everything done, backed up my drm unlocked the bootloader, and what not. Got to the last bit and I can't seem to get fastboot to work, it just says waiting for device. I've tried reinstalling all the drivers a few times, but nothing worked. Flashtool recognized the device, just couldn't get fastboot to recognize it. I'm running windows 10, I've made sure all the drivers are there but still no go. Any help would be greatly appreciated, I'm kinda stuck atm. EDIT, I found a fix for my case. Even though the drivers were installed, for some reason they weren't being read. Anyway all working now, thanks again.
spynathan said:
Ok so I've gotten everything done, backed up my drm unlocked the bootloader, and what not. Got to the last bit and I can't seem to get fastboot to work, it just says waiting for device. I've tried reinstalling all the drivers a few times, but nothing worked. Flashtool recognized the device, just couldn't get fastboot to recognize it. I'm running windows 10, I've made sure all the drivers are there but still no go. Any help would be greatly appreciated, I'm kinda stuck atm. EDIT, I found a fix for my case. Even though the drivers were installed, for some reason they weren't being read. Anyway all working now, thanks again.
Click to expand...
Click to collapse
atleast on windows 10 i found that i had to disable driver signature verifacation and sometimes i had to run command prompt in admin