is it possible to makre scr26 working with z1 compact? I bought it buf after nnfc parrying I can see only new tag found
is's all about coverapp.apk and coverwidget.apk, from z3, any ideas?
Have you been able to get the cover display working? How does the Z1C fit into the cover? I was wondering if I dare to order one as the Z1C is ~10% thicker.
Related
does it work with xperia z or is it for z1 only.
stryker.jp said:
does it work with xperia z or is it for z1 only.
Click to expand...
Click to collapse
Had a look at the cable as I was interested myself and the spacing between the pins is much larger and the phone has a matching metal plate or magnet on it for the cable to stick to. I just placed a magnet over the connections on my XZ and there is no reaction, nothing to stick to. Also have an X Acro S and it is the same, no reaction.
Was hoping I could be able to make a magnetic cable, for in-car use, which could be used for both devices
stryker.jp said:
does it work with xperia z or is it for z1 only.
Click to expand...
Click to collapse
It will not work because it doesnt fit..
Although theres some uncompletely-revealed tutorials for how to build a DIY magnetic stuff that might "Convert" the size of the z1's magnetic charger to work with us..
I can't link or describe more because I too am searching for that.. never found exactly..
I'ev been trying to find a case for my Z but I only find Z1 cases.
I know that the Z1 is a little bit larger than the Z.
But would the Z1 case fit on the z?
Aliivictoria said:
I'ev been trying to find a case for my Z but I only find Z1 cases.
I know that the Z1 is a little bit larger than the Z.
But would the Z1 case fit on the z?
Click to expand...
Click to collapse
I don't think so. As you've said previously, it's a little bit bigger than our loving Z. That's mean, the phone won't fit correctly as it should to. Therefore between the corners, screen, back may be spaces left, and due to your phone will be like in some shaker, mixer or sth, I guess.
And there's a lot of cases for Z. You can surf the whole net and e-shops, in that list including : eBay, aliexpress, amazon, dx.com, tinydeal and many others.
Aliivictoria said:
I'ev been trying to find a case for my Z but I only find Z1 cases.
I know that the Z1 is a little bit larger than the Z.
But would the Z1 case fit on the z?
Click to expand...
Click to collapse
Nope & they have different their camera position are different.
Search for "xperia z -z1" to exclude Z1 results. I usually end up going -z1 -z2 -z3 -ultra -tablet
On sites such as eBay you can also search for L36i or L36h, the Z's model number.
My Z3 has a really visble touchscreen grid. I don't live in the Sahara and this little spring sun makes it light up and sparkle like it wanted to remind me it's there.
They said Z2 was affected and Z3 was problem free, probably Z2 had a grill more than a grid.
Tell me I'm the only one and Sony will be happy to swap my unit for a new one.
Please tell me
ps a part from that (and other problems my screen has) I'm absolutely in love with this phone and it has been only a dozen hours.
The Grid is on every Z3 I've seen so far. One mate has an protection cover and its the only way to make it "barely" visible.
I let my phone repair under warranty because of this dots but the new touchscreen is only slighly better. The dots and grid is still visible in sunlight.
The iPhone and Samsung I owned before didn't have this "grid". It annoys me a bit and for sure I will never buy an phone again which shows these.
Z...Z1...Z2 and now Z3 - all devices had or have those dots..
That's digitaliser Sony is using...
If I can remember well, I think my old Xperia S had same digitaliser as well...
That's right, I also saw this only on Sony devices but I really don't care a bit for that....
It's not problem, it's not hardware failure - Sony built it that way...
Z3 powered by Tapatalk
Im getting a Z3 used, where the back cover is coming off (comes with new back cover and adhesive). Since the back cover is basically already off i'll have access to the battery.
I figured I might as well replace the battery to make the phone as new-ish as possible, and I see that the Z2 and Z3 batteries look virtually identical, with the Z2 battery being 100mah more.
Has anyone tried the swap?
Never tried it, but why not test it instead of sealing the back? - I would probably upgrade it
Yeah that's what I am thinking of doing. The added thickness of 100mah should be negligible but would probably be enough to cause the back to not seal completely. Just wondering if anyone else has done it first.
Hi!
I broke the screen from my Xperia Z5. I ordered a new one from ebay with the screen and frame, installed it, and afterwards the mic and GPS are not working. I ordered a new microphone thinking I broke it when disassembling the phone, but even with the new one it doesn't work. Does anyone have any tips on what to try before I get rid of the phone?
Google didn't help much except that someone had the same mic problem with the original Xperia Z - didn't work after screen replacement. Also I couldn't find any info on where the GPS is located on the Z5 so I could check it for damages or something.
I replaced my screen too, but I haven't got any issues. Maybe you broke the motherboard connectors