Related
Hello guys!!!, Today I get the new OTA with the firmware 05Q and I install it. I see in the forum a version of 05Q rooted LINK HERE
I only want to ask if anyone know another way of get root actually or if I should wait until our amazing toolkits for 1+1 get updated.
Thanks i nadvance!!! :cyclops:
You can gain root following, This thread. If you already have a custom recovery install, might be easier to install the pre-rooted 05QA. I went the second route.
P.S. That toolkit will root 05QA, just does not have the new firmware to go back to stock.
I have a custom recovery installed ofc, if I install the pre-rooted 05Q I lost all my data and apps? Should I do a factory reset? Thanks for your fast answer mate!!
Istvan_86 said:
I have a custom recovery installed ofc, if I install the pre-rooted 05Q I lost all my data and apps? Should I do a factory reset? Thanks for your fast answer mate!!
Click to expand...
Click to collapse
If you have custom recovery installed. Do a back up first. You should not have to wipe or lose anything.
rraquib said:
If you have custom recovery installed. Do a back up first. You should not have to wipe or lose anything.
Click to expand...
Click to collapse
Really thanks again mate!! I do it, like you, as soon as possible.
Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??
timmaaa said:
Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??
Click to expand...
Click to collapse
@timmaaa Read carefully I mentioned both option and he was wondering about the pre-rooted version.
rraquib said:
@timmaaa Read carefully I mentioned both option and he was wondering about the pre-rooted version.
Click to expand...
Click to collapse
You said that flashing entire ROM would be easier, it isn't. All that's need to get root is to flash the SuperSU zip. He's already on 05Q so flashing the ROM zip is completely and utterly pointless. It's like telling someone who's run out of petrol to install a entirely new petrol tank that's full of petrol (when all that's actually needed is the fuel).
It doesn't matter what someone thinks might be the solution, if you're going to answer in the q&a section you need to give the best and easiest solution.
The thing is flashing update-supersu is not working... for me at least. I updated OTA.. After installation finished, rebooted to TWRP and tried to install update-supersuv2.37.zip...
It doesn't show any error, but when I reboot my phone there is no supersu installed ( actually there is one but it's greyed out with android icon and not showing up on application list )
timmaaa said:
Wait guys, all you need to do is flash SuperSU from your custom recovery. That's it, nothing more.
@rraquib, why on earth would you tell him to flash the entire ROM again??
Click to expand...
Click to collapse
+1
only SU from TWRP
plato79 said:
The thing is flashing update-supersu is not working... for me at least. I updated OTA.. After installation finished, rebooted to TWRP and tried to install update-supersuv2.37.zip...
It doesn't show any error, but when I reboot my phone there is no supersu installed ( actually there is one but it's greyed out with android icon and not showing up on application list )
Click to expand...
Click to collapse
Install a newer version
#stayparanoid
Sorry guys for don´t answer your comments, I have been working out of my country for a couple of weeks.
I get root on 05Q with just flashing SuperSU 2.46 from recovery. Easy and fast, just that.
Anyway you have my thanks in your respective buttons.
EDIT: If moe people with doubts read this. I use the info on this post. http://forum.xda-developers.com/showthread.php?t=2788632
I Have Bought OPO today....and when i boot it...it is already cyanogen based....but then i receive the OTA update notification...i downloaded and when i press on the install update button ....it rebooted into recovery then come out a progress bar...but then ...it will disappear and stay on the recovery....but no update is installed....any solution? :crying: :crying:
Unlock your bootloader and update it yourself or flash a custom ROM. Check out my guide thread
http://forum.xda-developers.com/showthread.php?t=2839471
Transmitted via Bacon
Is there anyway to make the phone install via OTA without uunlocking bootlooader?
SinWei97 said:
Is there anyway to make the phone install via OTA without uunlocking bootlooader?
Click to expand...
Click to collapse
It should install the OTA without unlocking the bootloader, but if that's failing then unlocking the bootloader is the best option. Why don't you want to? There's no benefit to keeping it locked, and no detriment to unlocking it.
Transmitted via Bacon
Well...I just bought it yesterday... and I don't know if this is offical device or fake device...because the backside of the device...don't have the cyaanogen mod based logo....and it has some Chinese word behind the phone cover...so I'm not sure that is this a regular one plus one device or a china fake one plus one.
SinWei97 said:
Well...I just bought it yesterday... and I don't know if this is offical device or fake device...because the backside of the device...don't have the cyaanogen mod based logo....and it has some Chinese word behind the phone cover...so I'm not sure that is this a regular one plus one device or a china fake one plus one.
Click to expand...
Click to collapse
The Chinese OnePlus One isn't a fake, it's just the Chinese model.
Transmitted via Bacon
so its all the same? root ,bootloader and all those hardware.
the only different thing are those word are write In Chinese?
The Chinese version is missing one LTE band, but that's the only hardware difference.
So..if I flash custom ROM or kernel...will it bootloop ? Cause of different hardware from the other one.
and can yoh tell me the use of bootloader? If unlocked in this device... and is it safe for me to flash custom stuff in this china 's OPO?
SinWei97 said:
So..if I flash custom ROM or kernel...will it bootloop ? Cause of different hardware from the other one.
and can yoh tell me the use of bootloader? If unlocked in this device... and is it safe for me to flash custom stuff in this china 's OPO?
Click to expand...
Click to collapse
They're identical in hardware, apart from the one missing LTE band. They're completely compatible with each other, so you can flash anything as long as it's for the OnePlus One.
Transmitted via Bacon
Bro...first of all I wan to thank you for the friendly And helpful reply and so the hardware are same...just the LTE bandwidth are different right? so I can flash everything as long as it is compatible with OPO. But after unlock bootloader...can it be update using OTA? I wan to stay to stock as possible
SinWei97 said:
Bro...first of all I wan to thank you for the friendly And helpful reply and so the hardware are same...just the LTE bandwidth are different right? so I can flash everything as long as it is compatible with OPO. But after unlock bootloader...can it be update using OTA? I wan to stay to stock as possible
Click to expand...
Click to collapse
That's right, and yes you'll still receive OTA updates with an unlocked bootloader, even with a custom recovery installed. Here's a few threads you might find useful:
OnePlus One How-To
OnePlus One FAQ
OnePlus One Compilation Index
Transmitted via Bacon
Thank! I found the latest cm11 update Zip...so just put in directory and flash right? I just bought this phone...I hope I wont mess it up that fast.
SinWei97 said:
Thank! I found the latest cm11 update Zip...so just put in directory and flash right? I just bought this phone...I hope I wont mess it up that fast.
Click to expand...
Click to collapse
Yes, as long as you're currently on the build that directly precedes the one that you're going to flash. They need to be flashed in order. For example, to go from 33R to 05Q it must be done in this order
33R > 38R > 44S > 05Q
You can't do this:
33R > 05Q
Transmitted via Bacon
Yea...I know...now I'm on XNPH44S...and I wanted to updste to 05Q
Edit: I dowbloaded the zIP file from the oneplus forum...while I predd apply uodate...it say error with syslink.status 7...why is this happening?
SinWei97 said:
Yea...I know...now I'm on XNPH44S...and I wanted to updste to 05Q
Edit: I dowbloaded the zIP file from the oneplus forum...while I predd apply uodate...it say error with syslink.status 7...why is this happening?
Click to expand...
Click to collapse
For me, I will do this. Wipe /system and /cache and Dalvik/ART partition, then flash Calkulin's stock rooted ROM. Then you are on the latest ROM.
http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033
Compatible with Chinese version? And how can I backup the stock ROM ?
soralz said:
For me, I will do this. Wipe /system and /cache and Dalvik/ART partition, then flash Calkulin's stock rooted ROM. Then you are on the latest ROM.
http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033
Click to expand...
Click to collapse
Hey bro...how to install this? Download then flash rom...after ROM then audio?
do I need other recovery?
SinWei97 said:
Hey bro...how to install this? Download then flash rom...after ROM then audio?
do I need other recovery?
Click to expand...
Click to collapse
I answered you in the ROM thread.
Transmitted via Bacon
SinWei97 said:
Hey bro...how to install this? Download then flash rom...after ROM then audio?
do I need other recovery?
Click to expand...
Click to collapse
You will need a custom recovery to install it.
http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-2-8-3-0-t2981495
Hi! My question is lame, i know.. But here it goes anyway, i couldn't find a simple and direct answer..
Is less than a week that i have this phone, and i've been reading a lot of guides of how to rollback to cm11s.. the thing is i've flashed the latest CM12S signed zip ota through CM Recovery, everything is fine as i'm testing it right now..
My question is: if i want to go back to CM11S (in the case that i don't like CM12S or have some bugs), can i just wipe data / factory reset and cache in CM Recovery, and then flash the cm11s signed zip?
I haven't rooted or unlocked bootloader, is it relatively easy from what i read around here.. but i wondered if i had to go through all those steps (unlock bootloader, custom recovery, and then flash) or just doing the steps mentioned before will work just fine..
Is it better to fastboot flash or through custom recovery is fine also?
Thanks in advance!
PD: I'm also asking what do you think about some other 5.1.1 Lollipop ROM, custom kernel, etc.. I'm kind of a flashaholic and i would be able to install the custom recovery if would be really worth it
PD2: sorry for the bad english, i'm from argentina
cesarp3791 said:
Hi! My question is lame, i know.. But here it goes anyway, i couldn't find a simple and direct answer..
Is less than a week that i have this phone, and i've been reading a lot of guides of how to rollback to cm11s.. the thing is i've flashed the latest CM12S signed zip ota through CM Recovery, everything is fine as i'm testing it right now..
My question is: if i want to go back to CM11S (in the case that i don't like CM12S or have some bugs), can i just wipe data / factory reset and cache in CM Recovery, and then flash the cm11s signed zip?
I haven't rooted or unlocked bootloader, is it relatively easy from what i read around here.. but i wondered if i had to go through all those steps (unlock bootloader, custom recovery, and then flash) or just doing the steps mentioned before will work just fine..
Is it better to fastboot flash or through custom recovery is fine also?
Thanks in advance!
PD: I'm also asking what do you think about some other 5.1.1 Lollipop ROM, custom kernel, etc.. I'm kind of a flashaholic and i would be able to install the custom recovery if would be really worth it
PD2: sorry for the bad english, i'm from argentina
Click to expand...
Click to collapse
Just unlock your bootloader now, the longer you leave it the more difficult it'll be to backup your internal storage beforehand. You should really have it unlocked anyway as insurance against anything going wrong with your phone. Once you have unlocked it you can flash TWRP recovery, then the correct procedure to go back to CM11S would be to perform a full wipe (system, data, cache, dalvik cache) and then just flash the zip. As far as custom ROMs for this device go, there are many excellent options to choose from that offer extra customisation that you won't find on the stock ROM.
Don't we have to flash the firmware prior to flashing back to CM11s to prevent a hardbrick? I'm looking into doing this as well, so I'm just asking for my own clarity.
uansari1 said:
Don't we have to flash the firmware prior to flashing back to CM11s to prevent a hardbrick? I'm looking into doing this as well, so I'm just asking for my own clarity.
Click to expand...
Click to collapse
The firmware is contained in the official zip.
Heisenberg said:
The firmware is contained in the official zip.
Click to expand...
Click to collapse
Thanks! Stupid question, but can you please link me to the official zip? I already have TWRP installed, so it would be nice to revert sooner than later.
uansari1 said:
Thanks! Stupid question, but can you please link me to the official zip? I already have TWRP installed, so it would be nice to revert sooner than later.
Click to expand...
Click to collapse
You'll find them all here:
http://forum.xda-developers.com/showthread.php?t=2906746
Thanks!
Thank you both, i believe that this week i'll have some time and unlock the bootloader and flashing the TWRP recovery right away.. Then i'll see which ROM suits my use (i'm looking to battery friendly and high screen on time, will see the forums accordingly) and start the journey on this beautiful and well supported device
Also, thanks for the clarification of the modems.. Will be looking after that and make sure not to miss that step if required :good:
cesarp3791 said:
Thank you both, i believe that this week i'll have some time and unlock the bootloader and flashing the TWRP recovery right away.. Then i'll see which ROM suits my use (i'm looking to battery friendly and high screen on time, will see the forums accordingly) and start the journey on this beautiful and well supported device
Also, thanks for the clarification of the modems.. Will be looking after that and make sure not to miss that step if required :good:
Click to expand...
Click to collapse
Once you've flashed the ROM, please do share your results. I am still unsure if reverting from a Lollipop ROM to CM11S will cause issues with the radio and/or a softbrick of the device, as I've read that this "can" happen.
uansari1 said:
Once you've flashed the ROM, please do share your results. I am still unsure if reverting from a Lollipop ROM to CM11S will cause issues with the radio and/or a softbrick of the device, as I've read that this "can" happen.
Click to expand...
Click to collapse
Reverting from Lollipop to KitKat won't brick your device, whoever said that is wrong, and would have caused a brick because they didn't know what they were doing. You do need to make sure you flash a KitKat modem though, otherwise you'll have issues with the prox sensor.
Heisenberg said:
Reverting from Lollipop to KitKat won't brick your device, whoever said that is wrong, and would have caused a brick because they didn't know what they were doing. You do need to make sure you flash a KitKat modem though, otherwise you'll have issues with the prox sensor.
Click to expand...
Click to collapse
Thanks Timaaa...last question, I'm downloading the latest modem from this thread http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033.
Is this the correct flashable modem file to use, or do you recommend another for XNPH05Q?
uansari1 said:
Thanks Timaaa...last question, I'm downloading the latest modem from this thread http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033.
Is this the correct flashable modem file to use, or do you recommend another for XNPH05Q?
Click to expand...
Click to collapse
That modem should be fine.
Hi, Is it possible to go back to 4.4.4 from 6.0.1?
i think its possible , with cm11s. just try it, and let us know ! dont forget to backup , just incase
its CM13 back to CM11. Which software should I use. Read a lot of topics but, which one is for my phone?
I think you'll have to download 44s firmware and install it before you proceed with the rom.
enshiu said:
Hi, Is it possible to go back to 4.4.4 from 6.0.1?
Click to expand...
Click to collapse
You can! There are multiple way to do it:
First of all, you have the option to dual boot your phone with 4.4.4 using multirom or EFIdroid (not sure about EFIdroid)
You can just flash the full 4.4.4 zip as secondary rom, however! you NEED to flash the 4.4.4 modem in order to make the proximity sensor to work.
You can also just flash 4.4.4 as main ROM without using multirom or EFIdroid, make sure you wipe all the partitions first, then flash the full rom.
There is also the QHS_Bulk way.
First restore your phone using the color.zip in this guide.
When on color os (the chinese 4.4.4) you can fastboot flash the cm11s rom over it (step 4 in the guide, but make sure you use the cm11s rom).
Have fun!
You can but you need to flash KitKat firmware for oneplus one, also you need to find a compatible recovery menu to flash the ROM and firmware. Be sure to keep a backup of anything goes wrong
try this https://forums.oneplus.net/threads/how-to-back-to-stock-repair-system.225170/#post-8737053 , it might help.
Thanks all for the replies. I am a complete noob at this.
So what do I need to do exactly. I know my mums phone still has 4.4.4. so it is possible.
I have backup everything now so not afraid to lose any data anymore.
enshiu said:
Thanks all for the replies. I am a complete noob at this.
So what do I need to do exactly. I know my mums phone still has 4.4.4. so it is possible.
I have backup everything now so not afraid to lose any data anymore.
Click to expand...
Click to collapse
1. unlock bootloader
2. install twrp
3. flash new rom
Possible, but stupid idea.
You can just flash stock COS from fastboot
Choose what you want, I suggest the glorious 44s
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
PS
That ROM was the most stable with KK back in the days, but on some devices it needs a custom kernel to fix ghost touches.
Azhar_Fahry said:
1. unlock bootloader
2. install twrp
3. flash new rom
Click to expand...
Click to collapse
sorry I am completely noob at this
Where to find the files for a 1+1 phone?
enshiu said:
sorry I am completely noob at this
Where to find the files for a 1+1 phone?
Click to expand...
Click to collapse
Follow this until you install twrp:
https://forum.xda-developers.com/oneplus-one/help/poor-call-quality-t3586537/post71782642
Then go here:
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
And download the signed flashable zip you want, and install it from twrp.
seanwlk said:
Follow this until you install twrp:
https://forum.xda-developers.com/oneplus-one/help/poor-call-quality-t3586537/post71782642
Then go here:
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
And download the signed flashable zip you want, and install it from twrp.
Click to expand...
Click to collapse
By the way I am in twrp but, when I try flashing CM11 it says:
could not find meta-inf/com/google/android/update-binary
How to install twrp?
Oneplus CS has flashed mine back to 5.0.1 android with CM13. If I flash back 44S Will the android version go back aswell?
Thanks all got it reflashed to Kitkat and done now. Was stuck at step 4,5 and 6 while I only need 7,8 and 9.
enshiu said:
Thanks all got it reflashed to Kitkat and done now. Was stuck at step 4,5 and 6 while I only need 7,8 and 9.
Click to expand...
Click to collapse
Yes sorry i forgot to explain better, but I though was implicit ?
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you