Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.
Hi guys. i've been searching and trying to solve this problem for the past two weeks. can't fcking deal with it anymore. $20 for anyone that can help me , PLEASE!
p5110 here. had cm10.1 working for more than 1 year. when i updated to cm.10.3-rc2 , problems appeared.
Tried flashing stock firmware via odin. Says successfull but still in cm10.3 after reboot. boots up , however, it reboots after 1-3 mins.
tried flashing different roms, error.
Please, how can i revert back to stock or any working state ???
thanks,
alex
Anyone ?!
Try installing Clockworkmod (newest version) and then flash the stock firmware with that. Be sure to clear cache and dalvik cache first, and also factory reset (all through clockwork mod)
Latest official CWM won't help as it's to old for anything (stopped at 6.0.2.7 if i am not wrong), better use latest TWRP.
But: it sounds like your emmc got read only because it reached end of lifetime.
Indicator for that:
- flashing a different recovery via Odin doesn't change the recovery - it still boots the old.
- factory reset inside recovery doesn't change anything
Only way i know to get back write access would be to update the emmc firmware via JTAG. If there's no one with a JTAG near your place, replacing the emmc will be the solution.
GT-P5110 16 GB or 32 GB?
What recovery (also recovery version) are you using?
Using a custom kernel?
i flashed my p5110 with the files philz_touch_5.00.5-p5100.tar (through odin) and philz_touch_5.00.5-p5100 from the recovery menu.
everytime i try to install a new rom i always get status 7 error
the roms i tried are:
lineage-11-20171126-1223-UNOFFICIAL-espresso3g
Slim-p5110-4.4.4.build.9.0-OFFICIAL-8287
DhollmenK-4.4.4_p5110-20150619
any ideas what to do???:crying::crying::crying:
hombregr said:
i flashed my p5110 with the files philz_touch_5.00.5-p5100.tar (through odin) and philz_touch_5.00.5-p5100 from the recovery menu.
everytime i try to install a new rom i always get status 7 error
the roms i tried are:
lineage-11-20171126-1223-UNOFFICIAL-espresso3g
Slim-p5110-4.4.4.build.9.0-OFFICIAL-8287
DhollmenK-4.4.4_p5110-20150619
any ideas what to do???:crying::crying::crying:
Click to expand...
Click to collapse
Use the latest espresso-common twrp by Andi.
Also keep in mind that you should never flash your device with incompatible recoveries or roms because it could get bricked. Don't flash stuff for a p5100 to your p5110; they are different devices.
Thank you... I changed the twrp and it worked like a charm..
hello everyone
i have this typical probleme with my samsung galxy s advance
it got stuck on boot logo
i want to reset it but it wont enter te recovery mode
after that
i passed JB ROM and GB ROM with Odin
and i didn't solve the probleme
so my question is : is it a firmware issue or a hardaware one
and if there is a solution to this probleme can u redirect me to the link please
thank you all
still waiting for you gays
flash rom with pit for ur device
I DID so with both GB and JB
But still the same nothing happend
redaboy said:
I DID so with both GB and JB
But still the same nothing happend
Click to expand...
Click to collapse
So did you flash JB forcing repartition by PIT file as suggested by edi194 and still no results? neither recovery?
Did odin give you any kind of message in the flashing process?
If everything pass then I can't get why recovery seems to be corrupted, it can be an hardware failure, probably related to internal emmc.
You can try flashing only stock kernel again (not whole rom) trying a different version.
Another option you probably can still have a try is flashing over jb a custom kernel with odin, I would suggest cocore (https://forum.xda-developers.com/showthread.php?t=2140597 ), first of all creating the correct odin img file following the method indicated by a2n over here: https://forum.xda-developers.com/showpost.php?p=76414423&postcount=8449
Maybe this way we can hope to restore the broken recovery and then go on
Dear xda community,
I recently have been given a gt-p5110 to play around with.
Sadly i have not succeed in flashing a rom onto it...
I have some basic knowledge on flashing rom's but so far I hadn't had much luck...
I plan on flashing slimrom7 but I can't even get a proper recovery flashed...
I have tried flashing TWRP recovery using ODIN.
Even tough it says that the recovery is flashed successfully it doesn't appear to be working...
I also tried using ADB but I couldn't maintain a stable connection...
Hopefully someone is able to help me!
Kind regards,
Kevin Jansen.
After flashing with Odin you need to directly boot into TWRP, else stock rom restores stock recovery at boot.
How?
Android-Andi said:
After flashing with Odin you need to directly boot into TWRP, else stock rom restores stock recovery at boot.
Click to expand...
Click to collapse
Thanks for your reply,
How would I do this??
And do you know where I can find the original stock rom + recovery in case I would like to restore it to stock?
Kind regards,
Kevin Jansen.
Uncheck auto reboot in Odin.
After flashing wait 1 minute.
Disconnect your tablet from PC.
Boot recovery.
That's it
Stock firmware (.tar.md5) most of the time includes stock recovery.img. the .tar.md5 can be flashed with odin too.
you should find stock firmware here for your Device: http://samsung-updates.com