Hey Guys,
I am not sure if this is in the right thread but I need help with my Samsung Galaxy Note 10.1, 2012 edition, GT-N8010 16gb wifi model. I flashed it about a year ago with a custom ROM and it was working 100%. It hasn't been used in a while and this happened when I turned it on after a it wasn't used for a few weeks. It currently cannot get past the samsung logo when I start it up. If I start it holding the volume and power button I can get it to Odin mode/download mode where the screen says, "Downloading, Do not turn off target!!" In the top corner it says that the current binary is custom and the system status is official and finally RP SWREV: A2.
I have flashed this with stock software AND a custom Rom with Odin 3.9 and whilst flashing I can see a status bar going across the screen and then Odin say Pass and reboots the tablet but the reboot stalls at the samsung logo. I have also tried to flash CWM and again, Odin says pass but still not getting past the boot logo. When I flashed a stock ROMI think the current binary changes to samsung official, or maybe the system status says samsung official, either way it seems like Odin is successful but yet I still don't get a successful boot.
Should I flash a pit file? To be honest I am not quite sure what that would do, I know as much to say a pit file will repartition but beyond that I really have no idea what a pit file is, or where to get a 100% legitimate one as I know it is incredibly risky.
Seeing as how Odin recognises the tablet I am confident I have not bricked it, softbrick maybe, but surely something can be done to get this up and running due to the fact I can still send and receive a signal through usb? One question I have is, now that i have flashed a custom ROM and stock ROM without any success would USB Debugging be deactivated due to the new stock ROM?
I have got the profession version of Skipsoft Toolkit for this model but cannot seem to make any headway.
Sorry about the long post but I wanted to get all the details in for you guys to reduce the questions going back and forth. Any help would be HUGELY appreciated.
Thanks a million in advance!!!!
Hi
Thanks for writing to us at XDA Assist. I can see you've already posted the same topic in the Note q&a section here:
Samsung Note 10.1 (2012) Stuck on logo. HELP PLEASE!!!
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. That thread is in the right place, it's just a matter of waiting for someone to come to the thread and help you out now.
Good luck!
Thread closed.
Related
i have tried to root my phone, then got error message about su has stopped, so i tried following directions to unroot, i have downloaded several stock firmwares, 1 worked and brought my phone back to OS 4.1.1, i thought it was fixed and unrooted, so i did software update, and now stuck on power up, i have tried to go back and download the 4.1.1 back on it with no success, i cant even get in recovery mode. i have tried kies, and that doesnt work, have searched and nothing is helping, or spending hours downloading stock firmware that does not work, it will either fail, and 2 of them do say pass, but phone still locked on power up. any help would def be appreciated
Hi,
You should definitely ask for help in your device section Q&A, so the experts who own your device can assist you,
http://forum.xda-developers.com/galaxy-note-2-att/help
Keep in mind Odin will usually fail if Kies is running. End all kies processes in you pc's task manager.
Good luck!
Thank you. Thread closed.
I installed a stock rom for my Galaxy Tab 7.7 (P-6800) and it was stuck at the flashing SAMSUNG logo (the one with the tune) and so I juct left it there and went to sleep. The next day I tried turning on the tabalet but it didn't work so I booted into Download Mode and did a NAND erase. I was planning to install a stock rom from SAMMOBILE but now I can't boot into Download Mode. When I try to, it goes into the warning screen and after a second or so, it becomes black. I figured it could have been out of battery or a button is broken. I have tried charging the tablet with wall charger (2.1A) but it doesn't seem to work. I could occasionaly get it succesfully into Download Mode but it will turn off itself for no reason.
THERE IS NO OS INSTALLED SO DON'T TELL ME TO GO THE TERMINAL OR ANYTHING. IT IS ABSOULUTLY EMPTY ONLY HARDWARE AND DOWNLOAD MODE.
Anyways, please help. I am trying to get daniel_hk's cyanogen mod on this for my friend and I don't think he would expect me giving a bricked tablet to him.
Hi there,
All you need for recover your stock firmware is in this threads:
[GUIDE] Flash Official JB 4.1.2 Firmware on P6810 Wi-Fi Device
[GUIDE][Noob-Friendly][adb] How to avoid Superbrick // How to revive your bricked Tab
Need ics/jb stock rom for galaxy tab 7.7?
For more/other questions please register an account on XDA and ask directly here:
Galaxy Tab 7.7 Q&A, Help & Troubleshooting
Good luck
Hello,
I have managed to successfully root and install cyanogenmod 13 onto my Galaxy Note 3.
I have been trying to do the same on my partners Galaxy S5 SM-G901F - It currently has Lollipop on it.
I connect the S5 via Odin and download mode, Select TWRP, Apply it to the phone, Odin says its passed. The phone will reboot, then load back up to the normal lock screen as if nothing has happened. Turning the phone off then rebooting in recovery mode just gives the stock recovery.
I have read online that there is a line of code that runs on bootup on the phone that checks the recovery.img file and replaces it if it has been tinkered with. When I did my Note3 I found a script that somebody had made to stop a Note3 from doing this. I cannot find the equivilent though for the S5.
Could anyone please advise, provide a solution etc? A bit stumped now.
Many thanks
Neil
XDA Visitor said:
Hello,
I have managed to successfully root and install cyanogenmod 13 onto my Galaxy Note 3.
I have been trying to do the same on my partners Galaxy S5 SM-G901F - It currently has Lollipop on it.
I connect the S5 via Odin and download mode, Select TWRP, Apply it to the phone, Odin says its passed. The phone will reboot, then load back up to the normal lock screen as if nothing has happened. Turning the phone off then rebooting in recovery mode just gives the stock recovery.
I have read online that there is a line of code that runs on bootup on the phone that checks the recovery.img file and replaces it if it has been tinkered with. When I did my Note3 I found a script that somebody had made to stop a Note3 from doing this. I cannot find the equivilent though for the S5.
Could anyone please advise, provide a solution etc? A bit stumped now.
Many thanks
Neil
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, please have a look at the Note 3 homepage:
Samsung Galaxy Note 3
Most of the guides and helpful discussion threads can be found in the General Forum.
If you create an XDA account, you can ask for help in the Q&A section.
Good luck and welcome to XDA!
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
androcrazy24 said:
Hello guys,
A few months ago, I rooted my phone using kingroot. After a few weeks, i tried to install TWRP custom recover to unlock bootloader. I accidently downloaded a wrong version of it and flashed it using flashify app, after which i booted into recovery to check the new recover mode. But, something awkward happened. THE BOOT MODE DIDN'T OPEN AND THE SCREEN GOT STUCK AT "Booting into recovery". I read on the internet and realised that my device has got soft-bricked. Also, phone wasn't rebooting. So, i found a solution atleast start my phone. I took out my battery, pressed the buttons for download mode and then placed the battery back in and pressed the buttons for download mode and somewhow rebooted my phone (i read about this technique in xda forums). Now, although my phone works but i cannot access the recovery mode as it has got soft-bricked. Thus, i cannot perform a hard reset as it gets caught in that "recovery booting stuck cycle". So, can anyone tell me how to fix this? PLS QUICKLY. aLSO, i don't know much about ADB, so pls explain that too as my friend suggested me to use ADB to fix softbrick but im not sure!!
Click to expand...
Click to collapse
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
my phone is samsung galaxy s4 mini DUOS GT-I9192, OBVIOUSLY BY SAMSUNG..........
Kdio said:
Hi androcrazy24
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we would better approach your issue guiding you to the appropriate experts? Your last post from November 2015 is referring to the S III. It is still that?
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
androcrazy24 said:
"mY phone is samsung galaxy s4 mini duos GT-19192 RUNNING ANDROID 4.4.2
Click to expand...
Click to collapse
Hi androcrazy24
Thank you for your answer
Our experts at the below forum should be able to help you. Please be welcome to ask in there.
Galaxy S 4 Mini Q&A, Help & Troubleshooting
Nice regards and good luck.
.
I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
XDA Visitor said:
I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the Note 3 homepage:
http://forum.xda-developers.com/galaxy-note-3
If you create an XDA account, you can ask the experts for help, here:
http://forum.xda-developers.com/galaxy-note-3/help
Good luck and welcome to XDA!