SHORT: I need the filesystem block size (location would be nice too; however, I can guess that) so I can use e2fsck to restore my super-block.
LONG: I have been having issues for the past several days where I cannot umount /system. I thought it may have been a bad conversion going to/from or from/to rfs and ext4 and thought doing the conversion again had fixed it. But alas...it didn't.
I cannot umount the files system from adb ("device is busy" error) or CWMR ("Couldn't find valid filesystem superblock" in the log) on any version of ROM or using any kernel that I can find. Voodoo can seem to convert the filesystem (back/forth), but it only seem to work if I tell it to from the Voodoo Control and then reboot, which is odd. Still cannot umount.
When I try and use Navenedrob's Ext4 Formatter, it fails for /system. CWMR's log shows:
/tmp/tune2fs: Bad magic number in super-block while trying to open /dev/block/stl10
Couldn't find valid filesystem superblock
Should be fixable with e2fsck, if I can get the correct information from tune2fs.
Typically, the command should be:tune2fs -l /dev/block/stl10 OR tune2fs -l -L /system
That said, tune2fs is tell me "-l" is an unknown option.
Can someone who is familiar with tune2fs (or other filesystem tools) in the Android/BusyBox environment please post either the correct command or a list of the contents of the filesystem super-block? Please be sure to include if your /system is in EXT4 or RFS.
Man, I haven't see this **** in years. Even then, it was pretty exclusive to virtual/networked file system (e.g. LVM).
Any-who, much appreciated....
So, after sleeping on it, I came to realize an error in my thinking...
I cannot use e2fsck to fix an RFS filesystem. Even more upsetting is that I cannot seem to find anything on The Google about command line RFS tools. Guess I could try a conversion and EXT filesystem, then change the superblock, then convert back to RFS, but that seems awfully convoluted.
Suggestions?
I suggest you odin with pit and check repartition. That *usually* fixes everything.
Sent from my debloated ep1q charge......bro.
Thanks for the tip...I probably should have mention that I've used Pit+ED1 numerous times in a effort to fix this. It goes through successfully; however, it doesn't actually wipe the partition and I've found old files in /system.
UPDATE:
Last thing I tried is manually wiping everything from /system (in CWMR + adb shell). Also, wiped everything I could find having anything to do with voodoo or EXT4 (just in case). After power off then back to recovery, I found I could umount /system. Created a new partition, formatted, then wacked the partition.
I just (successfully) ran ED1+pit from the Samsung Flashing Utility (which I have NOT tried using before) and I am now in the process of upgrading. Once I have root back, I'll go see if the fix for /system was permanent.
When I installed Android 5.0 and later 6.0 ROM on our Xperia L experience was much better than stock. These ROM's are simply fantastic! However, we have memory issues. Yeah we can use apps like Link2SD or foldermount, but that's too much of a hassle. Thet's not really a long-term solution.
The main problem is that /data partition is too small to handle modern app file sizes. It's only 1GB.
And /sdcard partition also exists (which is seperate from data) and represents internal memory - that's 4GB.
On top of that our phone has externalSD slot - /extSD option.
When you install an app it always directly installs to /data. Yeah you can move it. But still 1GB is not enough, somehow I keep getting not enough memory notification.
So the first solution by @Kahana82 was to repartition. That way we could remove 2GB from /sdcard and give it to /data. But the problem is that when we change partitions our phone gets bricked when stock ROM is flashed again.
But I have come across a new idea that could work. Just need community help for that as I am not that experienced.
So instead of repartitioning we could simply mount /SDCard as /data (just rename it!) and mount /data as /SDCard. That way we could increase /data from 1GB to 4GB and I think it is enough for basic app needs. And therefore flashing stock ROM should work as it is just change in kernel or system. Only 1GB internal memory wouldn't be a problem since Android 6.0 allows us to mount externalSD as internal memory.
Now how to do it. I have taken a look at this thread for 2011 Xperia Arc. Looks like ramdisk could be modified to do so as I see that mountpoint is there.
EDIT: OK, I've managed to unpack boot.img and ramdisk. Here's what I get:
fstab.qcom file
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults recoveryonly
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,barrier=1 wait
/dev/block/platform/msm_sdcc.1/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check,encryptable=/persist/footer
/dev/block/platform/msm_sdcc.1/by-name/userdata /data f2fs rw,nosuid,nodev,noatime,nodiratime,inline_xattr wait,formattable,check,encryptable=/persist/footer
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check
/dev/block/platform/msm_sdcc.1/by-name/cache /cache f2fs rw,nosuid,nodev,noatime,nodiratime,inline_xattr wait,check
/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel /recovery emmc defaults defaults
/devices/platform/msm_sdcc.1/mmc_host/mmc0* auto auto defaults voldmanaged=sdcard0:32,nonremovable,noemulatedsd
/devices/platform/msm_sdcc.3/mmc_host* auto auto nosuid,nodev voldmanaged=sdcard1:auto,encryptable=userdata
I propose another solution.
Format "SD 0" as EXT4.
Then mount during the boot of Android, "SD 0" as DATA partition.
Simply replace "date" with "SD 0" at the time of installation of partitions.
This does not alter the structure of partitions and would give the 4 GB device for apps installation.
I've done tests. It's easy to format using the TWRP "SD 0" as EXT4.
The same process is easy to reverse.
It is safe because it does not change the structure of the partitions. If there is any problem just restore the Stock ROM.
Soon just need help to know which Android configuration files need to change mount "SD 0 in EXT4" like the DATA unit.
The Xperia L pass from 1,57GB to 4 GB !!!
Help, please !!!!
All the MM ROMs for Xperia L should have Adoptable Storage. You could format a partition of your SD Card as Adoptable Storage (using Apps2SD). And you can then move most of the apps to that partition in its entirety. Apps downloaded from Play Store would automatically go to the Adopted Storage.
Only certain apps like WhatsApp and Maps would refuse to move. You could use Link2SD to force move such apps to Internal SD of your device. It will move a big part of it.
On older ROMs, you should be able to setup a partition of your SD as linkable storage, allowing Link2SD or Apps2SD to move the whole app to the partition.
DragonClawsAreSharp said:
All the MM ROMs for Xperia L should have Adoptable Storage. You could format a partition of your SD Card as Adoptable Storage (using Apps2SD). And you can then move most of the apps to that partition in its entirety. Apps downloaded from Play Store would automatically go to the Adopted Storage.
Only certain apps like WhatsApp and Maps would refuse to move. You could use Link2SD to force move such apps to Internal SD of your device. It will move a big part of it.
On older ROMs, you should be able to setup a partition of your SD as linkable storage, allowing Link2SD or Apps2SD to move the whole app to the partition.
Click to expand...
Click to collapse
There are advantages to swap partitions instead of using the SD Card:
- The new partition date would be within the device's NAND memory. So there are the risks involved in using a sdcard always fragile ...
- How the partition is within the NAND memory beyond the security there is the highest performance.
The only downside is that the restriction would increase from 1,57GB to 4GB.
In my case I not use the smartphone for gaming. All of my APPs would fit into 2.5GB.
If I still needed more space, could use "Adoptable Storage".
- Could unmount and remove the SD card when wanted, after all was being used only for personal files and not apps.
Also it would be a great experimental situation of low risk to learn how to configure mount partitions on Android.
ConceptBR said:
There are advantages to swap partitions instead of using the SD Card:
- The new partition date would be within the device's NAND memory. So there are the risks involved in using a sdcard always fragile ...
- How the partition is within the NAND memory beyond the security there is the highest performance.
The only downside is that the restriction would increase from 1,57GB to 4GB.
In my case I not use the smartphone for gaming. All of my APPs would fit into 2.5GB.
If I still needed more space, could use "Adoptable Storage".
- Could unmount and remove the SD card when wanted, after all was being used only for personal files and not apps.
Also it would be a great experimental situation of low risk to learn how to configure mount partitions on Android.
Click to expand...
Click to collapse
Guys, devs are apparently working on unifying partitions. That's the best solution.
It is already working on Xperia T. So it is possible on Xperia L as well.
Let's just wait and see for now.
IMO This is actually top priority for Xperia L lol other that this the device is working just fine.
ConceptBR said:
I propose another solution.
Format "SD 0" as EXT4.
Then mount during the boot of Android, "SD 0" as DATA partition.
Simply replace "date" with "SD 0" at the time of installation of partitions.
This does not alter the structure of partitions and would give the 4 GB device for apps installation.
I've done tests. It's easy to format using the TWRP "SD 0" as EXT4.
The same process is easy to reverse.
It is safe because it does not change the structure of the partitions. If there is any problem just restore the Stock ROM.
Soon just need help to know which Android configuration files need to change mount "SD 0 in EXT4" like the DATA unit.
The Xperia L pass from 1,57GB to 4 GB !!!
Help, please !!!!
Click to expand...
Click to collapse
That's the same thing I was thinking. But yeah, thanks for the info that SDCard can be formatted to ext4. Then I think this can happen:
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults recoveryonly
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,barrier=1 wait
/devices/platform/msm_sdcc.1/mmc_host/mmc0 /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check,encryptable=/persist/footer
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check
/dev/block/platform/msm_sdcc.1/by-name/cache /cache f2fs rw,nosuid,nodev,noatime,nodiratime,inline_xattr wait,check
/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel /recovery emmc defaults defaults
/devices/platform/msm_sdcc.3/mmc_host* auto auto nosuid,nodev voldmanaged=sdcard1:auto,encryptable=userdata
Ehh, will try to make boot.img soon. You guys think this code would succeed? Then /sdcard wouldn't exist but let's just see if data would.
I've tried it and it f..ked my phone. I had to reflash stock and go to mm from there ...
cojocar.andrei said:
I've tried it and it f..ked my phone. I had to reflash stock and go to mm from there ...
Click to expand...
Click to collapse
Sorry to hear that...
In my case I need an even simpler solution ...
Using TWRP formatted "SD 0" as EXT4.
I managed to UnMount "/DATA" and "/sdcard".
I would like to reverse the mounts.
Partitioning modifies the structure of partitions.
Mounting is by software changes and safe.
The solution will allow any time to install the ROM Stock since the structure of the partitions will not be changed.
As in TWRP Terminal can ride correct partitions?
if I'm wrong then correct me, please ...
Device Configuration Partitons
sdcard -> /dev/block/mmcblk0p32
Userdata-> /dev/block/mmcblk0p31
CHANGE
sdcard -> /dev/block/mmcblk0p31
Userdata-> /dev/block/mmcblk0p32
------------------------------------------------------------
Is it correct? ADB Shell or Terminal?
unmount /sdcard/
unmount /Userdata/
mount -o rw /dev/block/mmcblk0p32/ /userdata/
mount -o rw /dev/block/mmcblk0p31/ /sdcard/
And reboot smartphone?
/system/init/init.rc?
------------------------------------------------------------
Sorry my bad english...
ConceptBR said:
In my case I need an even simpler solution ...
Using TWRP formatted "SD 0" as EXT4.
I managed to UnMount "/DATA" and "/sdcard".
I would like to reverse the mounts.
Partitioning modifies the structure of partitions.
Mounting is by software changes and safe.
The solution will allow any time to install the ROM Stock since the structure of the partitions will not be changed.
As in TWRP Terminal can ride correct partitions?
if I'm wrong then correct me, please ...
Device Configuration Partitons
sdcard -> /dev/block/mmcblk0p32
Userdata-> /dev/block/mmcblk0p31
CHANGE
sdcard -> /dev/block/mmcblk0p31
Userdata-> /dev/block/mmcblk0p32
------------------------------------------------------------
Is it correct? ADB Shell or Terminal?
unmount /sdcard/
unmount /Userdata/
mount -o rw /dev/block/mmcblk0p32/ /userdata/
mount -o rw /dev/block/mmcblk0p31/ /sdcard/
And reboot smartphone?
/system/init/init.rc?
------------------------------------------------------------
Sorry my bad english...
Click to expand...
Click to collapse
In theory it should work. I've tried it but it didn't come up right for me. I suspect the line in fstab.qcom for the user data that I've replaced (/devices/platform/msm_sdcc.1/mmc_host/mmc0).
I think we should replace
/dev/block/platform/msm_sdcc.1/by-name/userdata
with
/dev/block/platform/msm_sdcc.1/by-name/sdcard
and of course format sdcard as ext4.
I see no reason why it shouldn't work. Probably I'll try it again in a few weeks, when I'll have some spare time ...
So for this to work the fstab.qcom needs to look like this:
#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/platform/msm_sdcc.1/by-name/boot /boot emmc defaults recoveryonly
/dev/block/platform/msm_sdcc.1/by-name/system /system ext4 ro,barrier=1 wait
/dev/block/platform/msm_sdcc.1/by-name/sdcard /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check,encryptable=/persist/footer
/dev/block/platform/msm_sdcc.1/by-name/sdcard /data f2fs rw,nosuid,nodev,noatime,nodiratime,inline_xattr wait,formattable,check,encryptable=/persist/footer
/dev/block/platform/msm_sdcc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc,journal_async_commit,errors=panic wait,check
/dev/block/platform/msm_sdcc.1/by-name/cache /cache f2fs rw,nosuid,nodev,noatime,nodiratime,inline_xattr wait,check
/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel /recovery emmc defaults defaults
/devices/platform/msm_sdcc.1/mmc_host/mmc0* auto auto defaults voldmanaged=sdcard0:31,nonremovable,noemulatedsd
/devices/platform/msm_sdcc.3/mmc_host* auto auto nosuid,nodev voldmanaged=sdcard1:auto,encryptable=userdata
Great job! It's usable?
Option58 said:
Guys, devs are apparently working on unifying partitions. That's the best solution.
It is already working on Xperia T. So it is possible on Xperia L as well.
Let's just wait and see for now.
IMO This is actually top priority for Xperia L lol other that this the device is working just fine.
Click to expand...
Click to collapse
That's great, but what are people who can't use SD cards are supposed to do? Where will they store their data?
stuckbootloader said:
That's great, but what are people who can't use SD cards are supposed to do? Where will they store their data?
Click to expand...
Click to collapse
Want to hear my advice? Install ROM that gives you most data space, I don't know which ROM that is. And use your device as-is until you buy new one. You could also replace your motherboard.
I know this is not xda-spirit like, but I have to say give up messing with your existent motherboard before you hard-brick your device, I destroyed mine. Had to buy new device. Xperia L can be hard-bricked if you mess with partitions.
stuckbootloader said:
That's great, but what are people who can't use SD cards are supposed to do? Where will they store their data?
Click to expand...
Click to collapse
In Xperia T, i think what @Adrian DC use a sdcard emuled for this...
Option58 said:
Want to hear my advice? Install ROM that gives you most data space, I don't know which ROM that is. And use your device as-is until you buy new one. You could also replace your motherboard.
I know this is not xda-spirit like, but I have to say give up messing with your existent motherboard before you hard-brick your device, I destroyed mine. Had to buy new device. Xperia L can be hard-bricked if you mess with partitions.
Click to expand...
Click to collapse
Other Roms? In Galaxy S2 for example, with PIT partitions(other method), all ROMS working today with pits (official cyanogenmod inclusive) . I'm sorry, but, this is the price of testing
Thread closed at OPs request