This is a guide to help you root and install cwm recovery on Micromax bolt a35.
This is a tested method and is working fine.
NOTE: FOLLOW ALL THE STEPS CAREFULLY OR YOU WILL END UP BRICKING YOUR PHONE.
NOTE: ROOTING YOUR PHOINE VOIDS IT'S WARRANTY
TO ROOT YOUR PHONE:-
1.Download Moborobo from here and install drivers for your phone(ENABLE USB DEBUGGING BY GOING IN SETTINGS -> APPLICATION -> DEVELOPMENT -> ENABLE USB DEBUGGING)
2.Downlaod kingo root app from here
3.Now open kingo root app and root your phone by clicking root again button.(USB DEBUGGING SHOULD BE TURNED ON)
4.VOILA.. YOUR PHONE IS ROOTED...
Now, how to install CWM Recovery on your phone.
1.First downlaod cwm recovery from here
2.Download adb drivers from here.
3.install adb drivers and connect your phone, then right click on computer properties and click on device manager then look for e56 with ! sign right click it and click on update drivers then locate the adb drivers you downloaded and install them.
4.now copy the recovery.img file to adb driver folder
5..Now turn off your phone and press volume down key + power button.
6.open command prompt in where you installed the adb drivers by holding shift button and right clicking on command prompt
7.then write this command :-
fastboot devices
Click to expand...
Click to collapse
and if it shows your device id , you are good to go.
8.now write this command:-
fastboot flash recovery recovery.img.img
Click to expand...
Click to collapse
9.recovery will be flashed.
10.download quick boot app form google play and click on recovery and you will have cwm recovery.:good:
Will this method works for Micromax A116
Hi,
Will this method works for Micromax A116 ?
You can download framaroot to root your phone in 1 click. Link :- http://forum.xda-developers.com/showthread.php?t=2130276
For cwm go here and follow the instructions:- http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A110Q using xda app-developers app
@aarish1 iam looking forward to rooting my a35 bolt ... but i'd found that there is no thread for a35 and no roms... for the phone ....... KINDLY can You please help me in finding things for a35.......
sameerfardeen said:
Hi,
Will this method works for Micromax A116 ?
Click to expand...
Click to collapse
it wont work on your canvas hd it will infact brick your canvas hd
cant mount sd card
working now i used (RecoveryManager_v0.37b) and flashed it in the phone thanks friend....
adb drivers
hey how to install adb drivers after downloading the zip file?
I am unable to install via device manager
Can you help me on how to install custom recovery in A35
Sent from my Micromax A117 using XDA Premium 4 mobile app
Hey can you send link of recovery manager !
Sent from my HTC Vision using XDA Free mobile app
help
hi bro help cant root when trying with SRS root asks to select FRODO or ARAGORN or LEGOLAS on my phone but can't find when checking in frama root gives me the vulnerability error shows device seems not vulnerable to exploit in framaroot also tried with kingo root and unlockroot but no help pls help I just want to root it
Rooting
Hi
Guys kingo root doesn't work just uses srsroot and you can root easily.
it uses many different exploits till root is achieved.
thanks
Moborobo Help
Hi aarish1,
I have tried every USB driver available on the internet, but can't find the e56 driver and therefore no root for my Bolt A35.
Can you please share your version of Moborobo, does it support the A35 out of the box?
Can you just host the pre-requisite files somewhere?
Thanks,
sunshinekhan
siraj2cool said:
working now i used (RecoveryManager_v0.37b) and flashed it in the phone thanks friend....
Click to expand...
Click to collapse
Not showing device id when in cmd
what to do
Twrp for q324 bolt
How to root micromaxax bolt q339
How to root micromax bolt q339
gaurav247star said:
@aarish1 iam looking forward to rooting my a35 bolt ... but i'd found that there is no thread for a35 and no roms... for the phone ....... KINDLY can You please help me in finding things for a35.......
Click to expand...
Click to collapse
There are many ROMs ....plzzzzzzzz Google for ROMs
Sent from my MotoG3-TE using XDA-Developers mobile app
This Procedure for baseband R06
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
download link http://forum.xda-developers.com/attachment.php?attachmentid=2164433&d=1375631419
This Procedure for R03
1.download and install in vroot in pc,
2.download your phone driver if are you using win xp
3.next step connect your phone from PC,Laptop
4.open vroot in pc and see green root bottom
5. then see your phone is rooted succesfully
6.your phone is rebooting your's phone succes rooted
download lik http://get.file2desktop.com/DownloadManager/Get?p=3383&d=11334&l=10775&n=1
hit thanks botton
Q&A for Micromax Unite 2 Root and Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Micromax Unite 2 lock screen app misbehaving after root
Sudeep Duhoon said:
Don't mix this guide with some other as i will not help in that case.
First of all, use read back to get rom dump (backup) as there is no stock rom available on net.
Go here and follow the guide.
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download and copy/move KingUser to your memory card. (Fix provided by sagarwep:op)
3. Download any kitkat recovery from here and place it in pc.
4. Open SP Flash tools and load this MT6582_Android_scatter.txt in it. (alternative download link of sp flash tools)
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery .
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+down+power on, then press volume up to select recovery.
Note: in ctr recovery you can swipe right to go forward and swipe back to go backward, use it to navigate, save volume buttons.
8. Tap on install from sd card and swipe right on screen to go forward, select Unite_2_4.4.2_Proper root......zip and say yes to flash.
9. Reboot, Done.
In case any one wants working MTK droid tools, here or here
Please subscribe, rate and like this thread.
Any problem, ask in fb group or pm me on facebook.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've rooted my Micromax Unite 2 as per your root guide line, just after finishing root my lock screen app started misbehaving. after I restart my phone it first shows me the launcher and then after approx 20-30 seconds it shows lock screen. also I see an error message every time it boots which says that the process "system" is not responding -> kill or wait, choosing kill restores the normal phone function until next restart. restoring my backup of stock rom fixes the problem. could you please guide me how to solve this problem?
Not working
I did every single step correctly but idk why its showing no root access on my unite2 ...
then i tried rooting through mtk droid tools n im getting this error
ERROR:file abdb not install
the file isn't chosen
PLEASEEE HELP ... what to do
recovery mode problem
hey,
i have downgraded my micromax a106 to jeallybean of myphone aqua rio lite. now my recovery mode option is not working. on choosing recovery mode phone doesn't entering to recovery mode and it is booting to desktop. my phone is rooted. please help how to fix this
mmx unite 2 sd card mount/detect issue
Have recently bought micromax unite A106 june 2014 through flipkart. unable to detect/ mount external sd card .
tried with different sd cards which are working well in other phones.
Kindly help !!
Rooting Micromax unite 2- Problems
Hi Sudeep Duhoon,
I tried to root the Micromax Unite 2 using the software you have listed and followed the process to the T using the CTR 2..2 as recovery of choice.
1 When i try to activate the Root Explorer option on it gives me message"Sorry Test Failed, This feature can not run on your device"
2 When I connectbot i still get the $ sign in root
Please help.
Sadanand
Micromax Unite 2 Root and Custom Recover
Hi Sudeep ,
I had use the Tools and Rom given you to Root my Micromax Unite 2 . I had followed all the processes as shown.
Later on today When I tried to install Titanium It asked for SU Permission and It failed to get access and further message is its not rooted.
please help......
Use King Root ... 100 % success
Sent from my Micromax A106 using xda app-developers app
micromax unite 2 root
sir im unable to root my micromax unite 2. sp flash tools shows nothing n phone shows nothing but pc recognizes my device. developer is on plz help me
I want to upgrade to kit kat from jelly bean (mmx a106), but want to have flip to mute functionality of jelly bean
Can anyone guide me step by step for above 2 questions please
Sent from my Micromax Unite 2 using XDA Free mobile app
No command screen
I am using micromax unite 2
when i go to recovery mode i can see a no command screen... whenever i do something. any solution?
Recover Not Working Micromax Unite 2 After Flashing Stock Rom Of Android One?????
I have flashed rom of Micromax Canvas A1 on my Micromax Unite 2 By useing SP Flash tools. I thought it will work since both has almosh same specification (MTK 6582). And I will get new version of android on my Micromax Unite 2. Now my phone is not working. It is not even detected by SP flash tools. Otherwise i would have flashed the stock rom of my phone on it to make it work. Please help me with some guite by which i can recover my device.
Rooting Issue
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
HELP PLZ
pmt changed for the rom it must be downloaded
what to do now plz help me guys
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Presuming you are referring to error in sp flash tool while flashing :
1)If you are flashing same Rom (jb to jb or kk to kk) then that means the partitions are changed, if you have changed ebrs then restore them first, then the error will go
2)if you are flashing jb to kk or kk to jb then use format all & download option.
---------- Post added at 12:12 PM ---------- Previous post was at 11:42 AM ----------
Sumit Mandal said:
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
Click to expand...
Click to collapse
Use any custom recovery and flash koushik datta's superuser zip for rooting (he is the founder of cwm) to root your a106
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Thnks sir now my device is successfully rooted
Root Micromax Canvas 4
In the 5th step you said :
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
But I have to backup my Micromax Canvas 4 [ A210 ]. What numbers should I enter there ?
Please tell me asap. Or any other link or post about Canvas 4 [ A210 ]
Thanks in advance.
this error is coming bro
PMT changed for the ROM; it must be downloaded
Rooting Micromax Unite 2
Hello Guys I followed Sudeep Duhoon and was successfull in installing TWRP custom Recovery and flashing superuser [it installed as system app and I wonder how to remove it now!!!], but still my phone doesn't seem rooted as Root Checker app says "This device doesnt have proper root access". I want to root this anyway please help.
No emmc backup
Hello. I have a wiko bloom (same phone as micromax unite 2 and myphonerio lite), I have flashed TWRP on kitkat, I couldn´t use the scatter file provided in the post so I used the one that I had from my phone. Once I flashed the recovery, I tried to backup my phone, but I have an error saying Error: couldn´t mount /emmc
I have looked for that folder with root explorer but there is no /eemc folder but some files intead (like [email protected], [email protected])
Before trying anything by myself I would like to know it there is any way to fix that. I would like to install roms and that things but I´m not sure they would work if the architecture of the software is not the same :/
TThank you in advance
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment MT6592_Android_scatter.txt
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..
twrp download link not working
Hello sir, please provide me the working download link of twrp for micromax e352, your given link is not working. I badly need the file. You can also share the file in email attachment : [email protected] . Thanks in advance.
Twrp for micromax F666
Sir please make Twrp for my device as it is not available
MICROMAX F666
ANDROID 5.0
MT6582
RAM1GB
KERNEL 3.10.54
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment 3851592
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..