Hi, I got a new tablet called E-BODA Izzycomm Z80.
It came with a buggy OS and even the reseller (E-BODA, romanian rebrander, as the tablet is chinese) recommended updating the OS, Android 4.4.
I followed all the instructions. installed required drivers (for MTK) and with the SPFlashTool, but after selecting the scatter, pressing download button and connecting the usb cable, nothing happened - it didn't start doing anything even after waiting.
In the end, i have no idea what happened, but my tablet now will not start/charge.
But, when i connect it to the pc (windows 8.1) it makes the new device sound and i can see it in the device manager. but after a while, 6-7-10min it's icon get's that yellow exclamation mark saying that "This device cannot start"
It doesn't seem to be a "hard brick". Any ideas?
nevermind, dunno what happened to it, meta state or whatever. i help power and volume- for about 10 sec and it booted normally and works good now.
sorry for the trouble
Related
Hello. I broke the phone display and touchscreen. I found a tutorial on youtube.com how to disassembly and I changed both components. Now the phone displays only the LG logo, a few striped background and then black screen.
I did have escaped phone little hard.
I tried to rewrite the software but not working. Software LG says the phone has the latest software version.
It can be a hardware problem?
Already try LG Mobile Support Tool ? It can recovery your software problems (if it is the problem).
Download this B2Capp Setup
- install and run
- select Option & Help for changing your country
- install usb driver and choose P920 (if you already install the usb driver than skip this)
- unplug your battery , press and hold vol up while connecting your 3D to PC until found new driver install.
- after finish, and you are connected with the PC, select Customer Support and choose Recovery Phone
- input your EMAI and S/N
- wait until download and installation finish than your software should be recover.
Hope this help and sorry my english.
I followed the steps described above. System is download, but when is installing, phone start to disconnect and connect to the computer very quickly (I heard the sound from connecting and disconnecting driver in speakers) and an error occured.
I unplug the phone and I have reconnected pressing Volume + and restart the installation. Did not work.
The next step seems to be an authorized LG.
It is true I have not tried a rebranding the phone before. It's the first time. Motorola Milestone software system change is easier.
Hi there,
I just retry the steps that I wrote above, and it's work and download the software as soon as I input IMEI and check. I don't know why the phone disconnecting from your PC, did OMAPflash already installed in your PC ? If not, try to install it and retry the steps, I hope it works. If not... I'm sorry mate, that's the far that I know.
Hello to all,
It happened so that I obtained a Voosoo V75 based on MStar MSW8868 with android 4.03 (kernel=3.0.8) from Banggood webpage.
Superoneclick helped to root it without any problem. The device is very acceptable, has Wi-Fi, BT and Edge connectivity, battery for about 4-5 hours .
but it had one problem, the google play did not work on it.
I started editing /system/build.prop file. Changed initial names according to Samsung tablet and after restart it started looping.
Shows android for about 20 seconds and restarts ( I suppose so because it switches display for about 2-3 seconds)
Trying to boot in recovery mode ( pushing volume minus and power buttons) it first for one second shows droid on it's back with a spinning crystal inside and after a red triangle with excalmation sign.
No other button combinations work, or seems so.
PC with Vista shows ADB composite device as a device and VID_1f3a_PID_efe8 (this device can not start and marked as yellow)
No attempts to connect device through ADB terminal were successfull.
But what is the most interesting PDA Net software detects the connection to the tablet.
May be somebody has any ideas how I could bring this device to life?
Any help, any idea is welcome.
Dedicated driver,
Firmware,
Tools.....
evkapoc said:
Hello to all,
It happened so that I obtained a Voosoo V75 based on MStar MSW8868 with android 4.03 (kernel=3.0.8) from Banggood webpage.
Superoneclick helped to root it without any problem. The device is very acceptable, has Wi-Fi, BT and Edge connectivity, battery for about 4-5 hours .
but it had one problem, the google play did not work on it.
I started editing /system/build.prop file. Changed initial names according to Samsung tablet and after restart it started looping.
Shows android for about 20 seconds and restarts ( I suppose so because it switches display for about 2-3 seconds)
Trying to boot in recovery mode ( pushing volume minus and power buttons) it first for one second shows droid on it's back with a spinning crystal inside and after a red triangle with excalmation sign.
No other button combinations work, or seems so.
PC with Vista shows ADB composite device as a device and VID_1f3a_PID_efe8 (this device can not start and marked as yellow)
No attempts to connect device through ADB terminal were successfull.
But what is the most interesting PDA Net software detects the connection to the tablet.
May be somebody has any ideas how I could bring this device to life?
Any help, any idea is welcome.
Dedicated driver,
Firmware,
Tools.....
Click to expand...
Click to collapse
Follow this thread too..
http://forum.xda-developers.com/showthread.php?t=2342249
Hi everybody, i would appreciate if any can help me to get my son's Lenovo iDeaPad back
originally device had Android 3.1.x but i want to upgrade it to a higher version. found a handfull of ROMs online but i picked the official upgrade at Lenovo webite.
I followed their PDF file to the letter but for some reason flashing stopped at some point while sending a file to device. after more than 30min i decided to unplug K1 pad and tried to re-do the whole process again.
plug K1, push it to recovery mode (2 LEDs light at home button are on) and windows detects it (under device manager, it shows NVIDIA USB boot-recovery driver for Mobile devices). BUT, once i start Flash.bat (or any other flash file), windows loses connection to device .. NVIDIA USB driver disappears and i had to unplug K1, turn it off and push i back to recovery mode for windows to detect it again
Running the nvFlash commands one by one i noticeds once nvflash command try to start, driver disappears and i get error "USB device not found" !!!! any idea would help, thanks to you all
Same issue here!
Well... I have the same issue. I tried everything and anything I could find on line to no avail.
At this point I am more than willing to pay some "expert" in the forum to unbrick the dammed thing, otherwise I just own a nice paper weight.
Anyone interested? We can exchange emails and arrange a payment method (Paypal preferred).
I will ship my Lenovo K1 tablet for repair, pay for the service and send a pre-paid return envelope via FedEx...
Please help!!! I used it EXTENSIVELY for work.
Thanks all.
Jorge
joo! said:
Hi everybody, i would appreciate if any can help me to get my son's Lenovo iDeaPad back
originally device had Android 3.1.x but i want to upgrade it to a higher version. found a handfull of ROMs online but i picked the official upgrade at Lenovo webite.
I followed their PDF file to the letter but for some reason flashing stopped at some point while sending a file to device. after more than 30min i decided to unplug K1 pad and tried to re-do the whole process again.
plug K1, push it to recovery mode (2 LEDs light at home button are on) and windows detects it (under device manager, it shows NVIDIA USB boot-recovery driver for Mobile devices). BUT, once i start Flash.bat (or any other flash file), windows loses connection to device .. NVIDIA USB driver disappears and i had to unplug K1, turn it off and push i back to recovery mode for windows to detect it again
Running the nvFlash commands one by one i noticeds once nvflash command try to start, driver disappears and i get error "USB device not found" !!!! any idea would help, thanks to you all
Click to expand...
Click to collapse
I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.
bullracing said:
I guys I'm a noobie at this Stuff... But I make my Struggle, even trying it
I have a M4tel model SS1060 from Telcel, the phone was Ok, just one day it freezed , I removed the battery and when I put it back to the phone it get sttucked at M4 logo
So, I found at the web :cyclops: that with SPflashtool I could make it boot up correctly again, loading again the correct ROM or FIRMWARE with it:
I was making this procedure on a laptop with Windows 8.1pro 64bits.
1.- I get the firmware from MTK page I found
2.- I installed the mtk VCOM preloader drivers succesfully
3.- Extracted the RAR file of the Firmware.
4.- Opened Flashtool, I selected the respective scatter.txt file for my device, put the icon on "Donwload Only".
5.- I unpluged the battery, and conect it via USB, the program started to send the file . After a few secconds a error ocurred saying that the PMT was wrong. So i Try it again a few times, even with other version of SPflashtool, and different firmwares for the M4 ss1060 (diferent mobile operators ROMs) without good results.
At this point the phone was in the same condition... I could boot it into recovery normaly, but when triyng to boot it up it keeps stucked at M4's Logo.
I found that this issue was supposed to be fixed setting the program on "Firmware Upgrade" instead of "Download Only". So I make the same process changing it to Firmware Upgrade.....
7.- The progam started succesfully, and loaded the file completly with no errors, after eight minutes the "ok " icon" was shown :fingers-crossed: .
I unplugged the phone from the PC, insert the battery and nothing happened ANYTHING. I think that my mistake was to put "Firmware Upgrade".....
The phone keeps OFF I plug the Charger and it does not turns even the screen to Say "I'm Charging" :crying: I can't even get it into recovery mode, no logo screens. BUT.... When I plug the USB from the PC to the Phone I see that the Device Manager detects the phone with the Vcom Preloader of Mediatek.
So I tried to load the firmware again with SPflashtool on Download mode, the program send the file correctly, and it takes long as ten minutes showing the "OK" icon. But the phone keeps OFF, it makes nothing....
So I wonder If someone knows what to do, I was thinking on install a custom recovery, having on that the problem may be that I damaged the recovery of my phone making it unaviable to boot up. But I'm not shure, and I haven't found information about it.
I just knows that my phone has a MT6572 Chipset, I wonder if some one knows what to do.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!
lg optimus 3d won't turn on after baseband v20c flash and reboot, using the power button or power button, volume down and 3d key.
If I keep power and volume down while it's connected to the pc, then click power/volume down not sure the exact sequence, it starts making 3 short usb sounds, pause, 1 usb sound, then repeats forever
If I keep device manager open, in other devices with exclamation mark "OMAP4430" appears and device manager refreshes each time the sounds repeat, but it won't do anything else. If I pull the USB cable "OMAP4430" dissapears and sound loop stops
How can I fix this?
service sais I overwritten the bootloader. Baseband zip that I picked around here didn't say anything about bootloader... so far it made my phone inoperable. I'm trying to get this to work: https://forum.xda-developers.com/showpost.php?p=33650068&postcount=46
I unbricked it following this tutorial: https://forum.xda-developers.com/showthread.php?t=2246001
I'm pasting my post while I had some trouble with it:
Got P920 and I think I deleted my bootloader with a baseband zip: https://forum.xda-developers.com/op...ont-baseband-v20c-flash-t3654606#post73445561
I get stuck at step 7, can't find "LG port", basically what I get is fastloader mode, not downloader mode and LG port
then I get stuck at step 11, can't see "LG Cosmo"
If I pick step 13 and try to load gb bootloader it sais "waiting on device" forever, same as on fastloader trying to replace boots
What am I doing wrong?
EDIT1: Decided to do this on laptop (xp) not pc (windows 7). Now I see in ports section (which in windows 7 I don't at all) "LGE Bluetooth TransPort (COM15), not as in the tutorial but at least it's something... I set that to COM41 as instructed. Will edit here if I get any further
EDIT2: if I keep vol+ pressed it won't enter fastboot with os hacking tool. After it did, it found another hardware which I pointed to the only driver it finds in os hacking tool package, that is omap4430 which I already have installed, but this new one gives a code 10 this device will not work message, so I believe I'm stuck at step 11 again because I see no LG Cosmo in device manager.
EDIT3: I looked inside Device Manager > Android Device > OMAP4430 FastBoot USB Device, and is described in "Location:" as Location 0 (LG COSMO) ... which dissapears in a minute like while typing this Have no idea if this is what I'm suppose to get at step 11
EDIT4: seems that's LG COSMO after all because at step 13 after rebooting OS HACKING it did flash the GB BootLoaders (wrote a few lines of text)
...aaand ... drumroll ... it rebooted in my last rom (king's)
WOOOT! THANK YOU! THANK YOU! THANK YOU!
phone unbricked!
Now back to the problem of getting a proper rom that doesn't consume my battery idly in a day like 4.x unlike froyo (2.2.2) which can keep idle for a week, and that also gets a signal... tried them all except back to froyo (2.2.2) :-/
Click to expand...
Click to collapse