Hi, I know many of XL users have the problem that their camera just at once went down and doesn't work anymore. Well, I have a question around that.
My friend has a xperia M, she is almost fully broken (screen and lcd doesn't work after a hard fall) and I wondered how would it be to replace my camera with his. I know the XM has a 5mpx and XL 8mpx, I'm just wondering would that be possible? Or just the flat cabel to replace if it fits.
Any ideas are wellcome.
Bolonjez said:
Hi, I know many of XL users have the problem that their camera just at once went down and doesn't work anymore. Well, I have a question around that.
My friend has a xperia M, she is almost fully broken (screen and lcd doesn't work after a hard fall) and I wondered how would it be to replace my camera with his. I know the XM has a 5mpx and XL 8mpx, I'm just wondering would that be possible? Or just the flat cabel to replace if it fits.
Any ideas are wellcome.
Click to expand...
Click to collapse
You mean to change them??
Whoa!! Not possible!!
Lazynestor said:
You mean to change them??
Whoa!! Not possible!!
Click to expand...
Click to collapse
YAP, that was the question
I found out already that they are not the same at all, so, my plan to try to be dr. Frankenstein felt of.
Related
Hi,
I´m looking for a new digitizer and frontfacing camera, does anyone know where i can find those?
thanks in advance!
hiraj_panosian said:
Hi,
I´m looking for a new digitizer and frontfacing camera, does anyone know where i can find those?
thanks in advance!
Click to expand...
Click to collapse
the european/asian version of the SGS i9000 has a build in front facing camera out of the box, why didn't you get that one instead?
AllGamer said:
the european/asian version of the SGS i9000 has a build in front facing camera out of the box, why didn't you get that one instead?
Click to expand...
Click to collapse
He's from the Netherlands, why wouldn't he have the European version? Maybe he just wants to replace his broken etc. screen and/or camera?
rkantos said:
He's from the Netherlands, why wouldn't he have the European version? Maybe he just wants to replace his broken etc. screen and/or camera?
Click to expand...
Click to collapse
Ok im gonna say something very stupid but i wanted to replace my x10s screen and light sensor by ff camera. But I did something smarter i bought a SGS XD
hi all,
i just fixed my polaris with a new LCD screen.
and now i want to boot android but neither sd and nand breaks the boot.
when i boot it, i get verry weird lines, all colored lines.
i already changed the lcd type panel from 1 to 3 but the lines stil remain
i REALLY want to boot into android.
so someone with the same problem who solved it can you help me fix it please!
Thanks,
Nick
Probably the lcd is not compatible,
which model of lcd do you have?
could you post a photo?
l1q1d said:
Probably the lcd is not compatible,
which model of lcd do you have?
could you post a photo?
Click to expand...
Click to collapse
this is the screen i bought.
cgi.ebay.nl/LCD-LC-Display-Fit-HTC-Touch-Cruise-P3650-XDA-Orbit-II-/260721932197?pt=DE_PDA_Zubeh%C3%B6r_KM&hash=item3cb43cf7a5&autoredirect=off
thank-you for your reply
please,
no one had a similair issue ?
nickislauw said:
please,
no one had a similair issue ?
Click to expand...
Click to collapse
I've sold the 'fixed' phone and bought a non-fixed, geniune one (though also used).
The experienced fixers told me the lcd being put in place of originals, are not 10% compatiblewith stock ones, WM deals with this, but android does not.
vovkav said:
I've sold the 'fixed' phone and bought a non-fixed, geniune one (though also used).
The experienced fixers told me the lcd being put in place of originals, are not 10% compatiblewith stock ones, WM deals with this, but android does not.
Click to expand...
Click to collapse
ok thanks, so this mean i must buy another screen to run android ?
Hello! I have the same problem may have already found a solution?
Ive just recently bought the Pantech burst p9070 and so far im impresst with the phone except for a couple of things like screen viability in the sun, HD pics & video and one of my favorites, HDMI. I very much do hope Pantech will add these great features to the burst soon. With that said is their a legitament root that works for the Pantech burst p9070 and are their any custom roms and kernels developed for this phone? I would love to know what you guys think about the phone. It seems to me its a playground of development and possibilitys waiting to happen but thats only my opinion but again some help with rooting would be greatly appreciated guys and thanks so much...
Sent from my PantechP9070 using xda premium
Its already been rooted. Search pantech burst love anyone thread. No custom rom yet.
Sent from my PantechP9070 using xda app-developers app
No need to search through that whole thread just go here http://forum.xda-developers.com/showthread.php?t=1765846
No roms yet but its being worked on, as for now i just use UOT Kitchen http://uot.dakra.lt/kitchen/
the Love and Essentials links in my sig are the 2 main ones that we've been gravitating to for information. also there is a link in my sig for the IRC chat room if you have any questions or if your a dev wanting to help.
Gizmolord 3.0 Best Rom Till Now
Waiting for Gizmolord 3.1 !
Digging up old posts bad!
Sent from my PantechP9070 using xda app-developers app
I'm Stuck !
Yo Pantech Burst users ! How are you all ? Can anyone help me to ged rid of that new member thing ??:good:
What new member thing
Sent from my PantechP9070 using xda app-developers app
kagedws6 said:
What new member thing
Sent from my PantechP9070 using xda app-developers app
Click to expand...
Click to collapse
Never mind !
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
cyclops13 said:
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
Click to expand...
Click to collapse
its broken
ninjah said:
its broken
Click to expand...
Click to collapse
Your port is broke buddy.
Sent from my PantechP8010 using xda app-developers app
cyclops13 said:
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
Click to expand...
Click to collapse
Mine is also split, however the metals align together. If your jack goes in fine without any resistance, it should be fine? I dont know. You can try. If it doesnt go in fine, you can try taking a small screwdriver and pushing one of the metals (the one that "violated" the alignment) into the phone so they align better.
Thanks all for your comments. Looks like this has to go back to the seller for replacement.
BTW, I bought this off ebay from phonestoreusa. The seller is pretty responsive, anybody has first hand experience with him?
Thats where I got my pantech burst too. That was new.
cyclops13 said:
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
Click to expand...
Click to collapse
I would guess its defective. Mine isn't and never seen one split before on any thing like that. Does it charge and seem to work? Maybe go to store you got it or any store actually and look at display model and show them.
Well when I replied there was no others? Oh well. Lol.
cyclops13 said:
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
Click to expand...
Click to collapse
Mine also has the split however yours looks a little out of place (the gap looks wider) because in my case the two pieces are right next to each other and look perfectly in place.
What is your exact concern, are facing trouble while connecting to the port?
cyclops13 said:
Guys, need help. I recently got a pantech burst and noticed one odd thing.
The micro USB port is different than most of my other devices, its kinda split on one side. Is it defective or normal? Can you check yours and confirm?
I am enclosing a picture for reference, tried my best to show what I see. Thanks.
Click to expand...
Click to collapse
While the split is normal (part of the build) yours seem to have one portion out of alignment with the other. Check whether your phone charges properly.
Just wanted to update, I got a replacement from phonestoreusa. But seriously, the guy needs to reword his listing, no way the phones he is selling as "New" are new!
Can't connect to camera
My burst is rooted and right after I rooted it, I installed PAC-MAN ROM KK RC-3 dev 4.4.4.
The kernel version is 3.0.101-cyanogenmod-g83586a2
[email protected] #1
Wed Nov 19 18:31:20 EST 2014
Now it will no longer connect to my camera nor my camera flash (ie: I can't use a camera or torch).
How can I remedy this situation?
Hi Community,
sorry if this exists anywhere, but I didnt found something in the forum so I'll just ask for it
I heard that the Z3 is able to be used with a pencil.
I just tried this out with the standart draw app from the Xperia Z3 and it didnt worked.
Did I missed an option or something ?
Google don't found something or maybe I'm just too stupid
Thanks for your answers
( Sorry for my bad english )
this works with previous Zs, but not the Z3. I think it has something to do with the new panel supporting glove mode but not pencil operation
I've never heard of that! How did it work on previous models?
work on Z ULTRA and Z2
Not on Z3
freddy1991 said:
work on Z ULTRA and Z2
Not on Z3
Click to expand...
Click to collapse
Do you think it's possible after a root with some hidden function ?
I bought the Z3 because of that feature that's really dissappointing to me :/
Dangit!
I really wanted this feature in my z3!
You want to draw on your screen using a pencil? Is this serious? Or do you mean like a tablet pen ?
BeschdeSpieler said:
Do you think it's possible after a root with some hidden function ?
I bought the Z3 because of that feature that's really dissappointing to me :/
Click to expand...
Click to collapse
No idea
Lol
wolf0491 said:
I saw some video of a guy playing fruit ninja with a knife so something was allowing input there
Click to expand...
Click to collapse
I really don't know how this is possible - I heard that it's possible too.
But Google just don't want to tell me how this is possible :/
Hey,
I had to replace my screen some days ago, and by opening my phone, I was just thinking, is it possible to change the camera by another one ?
Of course, I mean a better one than the original we have.
I have no idea if the connector is the same between every Sony camera for exemple.
Thanks in advance for the answer !
PS : I have a Oneplus One and I find the camera really ****ty
pocj30 said:
Hey,
I had to replace my screen some days ago, and by opening my phone, I was just thinking, is it possible to change the camera by another one ?
Of course, I mean a better one than the original we have.
I have no idea if the connector is the same between every Sony camera for exemple.
Thanks in advance for the answer !
PS : I have a Oneplus One and I find the camera really ****ty
Click to expand...
Click to collapse
no you can't ...the camera needs a hardware that support it ...and even if that was found it's impossible i think :silly:
flash- said:
no you can't ...the camera needs a hardware that support it ...and even if that was found it's impossible i think :silly:
Click to expand...
Click to collapse
okey, thank you for the information !