Database Info

Galaxy Chat GT-B5330 SUPER Thread !!

This Thread is Dedicated to Galaxy Chat
ROOT Procedure (By Androsamace) : ​
(Note : You Need to Flash Poland Firmware before doing this procedure as rooting works only on Poland Firmware. Get Poland Firmware from here : Poland Firmware)
Steps / Instructions on how to Flash Poland Firmware :
Once You Downloaded the Poland Firmware from above link , Extract it on the Desktop
Download Odin from here.
Then , Open Odin and click on PDA And select the file from Extracted Zip
Then click on start , wait for minutes.
Then , Enjoy You just flashed the Poland Firmware
Steps / Instructions for Rooting:
Download Root Package and put it in Your External SD Card.
Download recovery.zip and PIT file and Extract it on Your Desktop
Switch of your Phone.
Then , Go to Download Mode by pressing Volume UP and Power button together .
Connect your pc with phone in download mode
Download Odin from here.
Them , Open Odin on Pc and Click on PDA and choose “recovery.tar.md5″ from exracted zip
Click on Start , Wait for Few Minutes . Then reboot your phone
After Rebooting , Turn of your phone
Then , Go to Recovery Mode by pressing Volume Up and Power button together .
Choose “apply update from sdcard”
Choose “Galaxy_chat_Root.zip”
Then After This , Reboot Phone
Enjoy , Your Phone is Rooted
CWM (By Androsamace) :​
Only Backup Works as of Now and Nothing else Work
Do not factory Reset
Download
MODS / ROMS :​
1) Xperia ICS MOD : http://forum.xda-developers.com/showthread.php?p=36733589

somebody fix the poland firmware

[Completed] how to update my rooted samsung galaxy s4 GT i9500 to kitkat version?

I have rooted my phone.
Its still running in 4.3 version.
My phone is asking for the updates but i am not able to update it.
Somebody please help me on this

Hi there,
Go to www.sammobile.com/firmware sign up then search for your device "gt-i9500" and follow the instructions from there, listed bellow:
Instructions
•Extract (unzip) the firmware file
•Download Odin v3.09
•Extract Odin zip-file
•Open Odin v3.09
•Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
•Connect phone and wait until you get a blue sign in Odin
•Add the firmware file to AP / PDA
•Make sure re-partition is NOT ticked
•Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
Good luck

Thread closed, thank you

[Completed] Unbricked your galaxy y? Help is here.

Steps How to Unbrick your galaxy y
1.Download Odin V1.85 on your Computer Odin3-v1.85.zip - 4shared.com - online file sharing and storage - download
2.Download S5360DDLA1 Android AdvicesGalaxy Y S5360 - Steps to Install Official Global Gingerbread DDLA1 2.3.6 Firmware
After you Install it Extract the Odin on your computer and Click Odin v1.85 and After you downloaded your original firmware, extract it also to your computer..
3.After that shut down your phone and put it on download mode
4.Connect your Android Phone to your PC and Open Odin
5.And u will see a yellow box on the left side it means your phone is connected with the PC
6. Now click PIT and go to your extracted s5360 ddla1 and open that file and select totoro_0623.pit
7.same thing you do on Bootloader, PDA, Phone and CsC
8.now check if everything is done and press start ..
9.wait for the flashing to finish
10. If its finish do not unplugged the usb cable yet until rebooting is done
11. AND NOW..!! CONGRATSS!! YOU HAVE A NEW UNBRICKED PHONE

Hi there,
This isn't the right place for that share.
here is the device forum related where you can share your work:
Samsung Galaxy Y GT-S5360
Good luck
Thread closed, thank you

[Completed] How to flash a stock ROM using Odin?

I have a Samsung galaxy ace GT-S5830
I tried to install a custom ROM and messed up, and now I cannot access recovery mode but can access download mode. So I tried to flash the stock ROM using Odin but when I connected the phone to the computer, an error comes up saying "USB device not recognized". I have tried numerous drivers without getting results, I tried on different computers, I tried using different USB cables, but no results.
Please does anyone know of a way to fix this ? thanks in advance

Hi there,
Please take a look at this solved thread: rescue / recover bricked samsung galaxy ace s5830
For questions you can do it there but first you must register an account on XDA. Also for any other questions related to your device please post here:
[S5830 + B/D/L/T ONLY] A Newbie Guide for your Galaxy Ace
Official instructions for flashing stock firmware with Odin here:
Instructions
 Extract (unzip) the firmware file
 Download Odin v3.09
 Extract Odin ZIP file
 Open Odin v.3.09
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Good luck

What you suggested didn't work. But thanks anyway.
I have submitted my issue to the forum you have mentioned.
Thanks for the speedy reply

[solved] pit for sm-n9005 32 gb pit [bri-tgy]

BEFORE MY PHONE RUNNING ON XSI 5.0 FIRMWARE
AND NOW BY THIS PROCEDURE
SUCCESFUL TO INSTALL BRI 5.0
THIS IS FOR MISMATCH CATCH.IMG.EXT4
ODIN FAIL WHO TRY IT
FOR FLASH WTH HONGKONG TAIWAT FIRMWAE 5.0 WORKING THIS PIT
FIRST U DOWNLOAD
N9005ZSUGOK2 N9005OZSGOK2 N9005ZSUGOK2 FROM SAMMOBILE
THEN DOWNLOAD PIT FILE GIVEN LINK
then download Odin_v3.09
select pit
pad tab select firmware
before connect phone enable usb debugging
then connect phone with download mode
FLASH FIRMWARE
WAIT 5 MINUTE YOUR PHONE STUCK IN BOOT
MUST CWM RECOVERY n9005-cwm-recovery-6.0.4.7-kk(0125) COMPALSARY FLASH
NOW REMOVE BATTERY AND INSERT IT AGAIN
AND GO IN DOWNLOAD MODE
THEN DOWNLOAD CWM RECOVERY FILE GIVEN LINK
CWM RECOVERY.TAR UNDER PDA TAB AND FLASH IT
THEN YOUR PHONE START IN NORMAL BOOT AND EVERYTHING WORKING PERFECTLY