Database Info

5210 Odin stock files..

had a hard time finding stock files to flash via odin for the 5210 after a soft brick.. and sammy takes forever to download.
so i figured i share them for anyone that needs to get back to stock and has a hard time finding a tar file.:good::good:
Model: GT-P5210
Model name: GALAXY Tab3
Country: Spain
Version: Android 4.2.2
Product Code: PHE
PDA: P5210XXUANB4 https://www.dropbox.com/s/li4cj8t24g657bb/P5210XXUANB4_P5210OXXANB1_PHE.zip
CSC: P5210OXXANB1
Instructions
Extract (unzip) the firmware file
Download Odin v3.09 (CAN BE FOUND IN THE BOTTOM LINK)
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes:victory::victory:

[Completed] Unbricked your galaxy y? Help is here.

Steps How to Unbrick your galaxy y
1.Download Odin V1.85 on your Computer Odin3-v1.85.zip - 4shared.com - online file sharing and storage - download
2.Download S5360DDLA1 Android AdvicesGalaxy Y S5360 - Steps to Install Official Global Gingerbread DDLA1 2.3.6 Firmware
After you Install it Extract the Odin on your computer and Click Odin v1.85 and After you downloaded your original firmware, extract it also to your computer..
3.After that shut down your phone and put it on download mode
4.Connect your Android Phone to your PC and Open Odin
5.And u will see a yellow box on the left side it means your phone is connected with the PC
6. Now click PIT and go to your extracted s5360 ddla1 and open that file and select totoro_0623.pit
7.same thing you do on Bootloader, PDA, Phone and CsC
8.now check if everything is done and press start ..
9.wait for the flashing to finish
10. If its finish do not unplugged the usb cable yet until rebooting is done
11. AND NOW..!! CONGRATSS!! YOU HAVE A NEW UNBRICKED PHONE

Hi there,
This isn't the right place for that share.
here is the device forum related where you can share your work:
Samsung Galaxy Y GT-S5360
Good luck
Thread closed, thank you

note 2 N7100 boot logo loop or stack tested solution

hello guys i bought a new samsung note 2 N7100 and the rom on it was a custom rom so i wanted to change it to stock rom but then after downloading odin 3.07 and also the flashfile from sammobile.com i run into a fail error many times when i tried to flash it but i didnt loose hope still went looking for solutions and got this one .
1. download odin 3.07
2.download the flash file i attached
3. download the PIT file
4. download kies 3 for the drivers
5. connect your phone in download mode before lunching odin 3.07
load the PIT file and the pit tab and then load the flash file at the PDA section and wait for them to load when all is ready then with ur phone in download mode (vol down +home button +power) then vol up button to enter into download mode .
link to roms file :http://forum.xda-developers.com/showthread.php?t=1915386
and http://forum.xda-developers.com/showthread.php?t=2466405

bronzy2020 said:
hello guys i bought a new samsung note 2 N7100 and the rom on it was a custom rom so i wanted to change it to stock rom but then after downloading odin 3.07 and also the flashfile from sammobile.com i run into a fail error many times when i tried to flash it but i didnt loose hope still went looking for solutions and got this one .
1. download odin 3.07
2.download the flash file i attached
3. download the PIT file
4. download kies 3 for the drivers
5. connect your phone in download mode before lunching odin 3.07
load the PIT file and the pit tab and then load the flash file at the PDA section and wait for them to load when all is ready then with ur phone in download mode (vol down +home button +power) then vol up button to enter into download mode .
link to roms file :http://forum.xda-developers.com/showthread.php?t=1915386
and http://forum.xda-developers.com/showthread.php?t=2466405
Click to expand...
Click to collapse
Follow these steps
http://forum.xda-developers.com/showthread.php?t=1896696
-sent from mobile using android 5.0

[Completed] How to flash a stock ROM using Odin?

I have a Samsung galaxy ace GT-S5830
I tried to install a custom ROM and messed up, and now I cannot access recovery mode but can access download mode. So I tried to flash the stock ROM using Odin but when I connected the phone to the computer, an error comes up saying "USB device not recognized". I have tried numerous drivers without getting results, I tried on different computers, I tried using different USB cables, but no results.
Please does anyone know of a way to fix this ? thanks in advance

Hi there,
Please take a look at this solved thread: rescue / recover bricked samsung galaxy ace s5830
For questions you can do it there but first you must register an account on XDA. Also for any other questions related to your device please post here:
[S5830 + B/D/L/T ONLY] A Newbie Guide for your Galaxy Ace
Official instructions for flashing stock firmware with Odin here:
Instructions
 Extract (unzip) the firmware file
 Download Odin v3.09
 Extract Odin ZIP file
 Open Odin v.3.09
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Good luck

What you suggested didn't work. But thanks anyway.
I have submitted my issue to the forum you have mentioned.
Thanks for the speedy reply

[Completed] Galaxy a3 downgrade to 4.4.4 phone doesn't turn on

Hello everyone.
My friend asked me to downgrade her galaxy a3 a300fu from 5.0.2 to 4.4.4. I followed instructions:
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
and odin3 said: PASS! After this screen is black, and i can't turn on the phone.
Guys could you please help me?

mateusz112 said:
Hello everyone.
My friend asked me to downgrade her galaxy a3 a300fu from 5.0.2 to 4.4.4. I followed instructions:
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
and odin3 said: PASS! After this screen is black, and i can't turn on the phone.
Guys could you please help me?
Click to expand...
Click to collapse
Hello dear
Please look Galaxy A3, A5, A7, A8 Q&A, Help & Troubleshooting for more information.
Thank you
Paget96