Database Info

[Q] Getting back to stock from unlocked bootloader

I unlocked my MT4GS's bootloader a few months ago using HTC's tool, but I now find myself in a place where I need to reflash a stock ROM due to miscellaneous malfunctions. It's not for warranty/damage, I tried to restore my ROM to factory settings and couldn't due to removing the Sense UI for ADWLauncher. I tried to reflash my ClockWorkMod stock ROM backup, but it had a MD5 mismatch (and, sadly, was deleted accidently last night in organizing my SD card).
I am on an unlocked bootloader with S-ON RL showing on the boot screen. I have tried downloading one of the SG59IMG.zip files (both the latest 1.63 release, and the 1.55 release), but those do not work. I place them on my SD Card's root and allow HBOOT to find them, but it reports "Wrong ZIP!". I've read that re-locking my bootloader will fix this; any confirmation?
At this point, what I really want to do is get my phone back on a stock ROM, with or without ClockWorkMod, and start over again with the rooting process. As I said, this isn't for warranty service; I want to make sure I have a good stock recovery image available and that I have a solidly working phone while I wait for an ICS ROM that's stable for everyday use to come around.
Thanks in advance for any help.

WinterHalliwell said:
I unlocked my MT4GS's bootloader a few months ago using HTC's tool, but I now find myself in a place where I need to reflash a stock ROM due to miscellaneous malfunctions. It's not for warranty/damage, I tried to restore my ROM to factory settings and couldn't due to removing the Sense UI for ADWLauncher. I tried to reflash my ClockWorkMod stock ROM backup, but it had a MD5 mismatch (and, sadly, was deleted accidently last night in organizing my SD card).
I am on an unlocked bootloader with S-ON RL showing on the boot screen. I have tried downloading one of the SG59IMG.zip files (both the latest 1.63 release, and the 1.55 release), but those do not work. I place them on my SD Card's root and allow HBOOT to find them, but it reports "Wrong ZIP!". I've read that re-locking my bootloader will fix this; any confirmation?
At this point, what I really want to do is get my phone back on a stock ROM, with or without ClockWorkMod, and start over again with the rooting process. As I said, this isn't for warranty service; I want to make sure I have a good stock recovery image available and that I have a solidly working phone while I wait for an ICS ROM that's stable for everyday use to come around.
Thanks in advance for any help.
Click to expand...
Click to collapse
Get the stock recovery from the devs section, Change " SG59IMG.zip" to " PG59IMG.zip", relock the bootloader so that hboot will see the zip. I think the lock command is "fastboot oem lock". To unlock it again you would have to flash the unlock token again
Sent from my DoubleShot Lite using Tapatalk

ac3theone said:
Get the stock recovery from the devs section, Change " SG59IMG.zip" to " PG59IMG.zip", relock the bootloader so that hboot will see the zip. I think the lock command is "fastboot oem lock". To unlock it again you would have to flash the unlock token again
Sent from my DoubleShot Lite using Tapatalk
Click to expand...
Click to collapse
Whoops, it is PG59IMG already, just at work and wasn't in front of my phone at the time to confirm the file name. Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.

WinterHalliwell said:
Whoops, it is PG59IMG already, just at work and wasn't in front of my phone at the time to confirm the file name. Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.
Click to expand...
Click to collapse
Theres no other way that i know of sry
Sent from my DoubleShot Lite using Tapatalk

http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24
That covers everything.

WinterHalliwell said:
... Is there a way to relock my bootloader without using the fastboot program from my computer? I've already uninstalled all of the HTC/ADB stuff to save processing power on my netbook and I'd like to avoid reinstalling it all if at all possible.
Click to expand...
Click to collapse
Ask and ye shall receive - I put together a package with the bare minimum you need to use ADB or fastboot. At about 736kb I think it's exactly what you were looking for.
(windows machine)
You don't need to install the entire SDK just to get the ADB or fastboot tools - all you need is what's here.
doubleshot_adb-fastboot.zip
Download Link
MD5: 47e72c0a2e2c1caaabd95b5df83e8913
Size: 736.03 KB
I also included a command prompt .bat file (Command.bat) so that when you unzip the archive to a folder, open that folder and double-click the Command.bat file and it will open you up to a command prompt already in the folder with the tools, wherever it is.
No more typing in some annoying CD command to get to the directory with the tools - simply open the folder (wherever it is at the time) and run Command.bat.
You will be ready to just dive right into ADB or fastboot commands (which is all you want, anyway, right?)
You will need the fastboot drivers for the doubleshot installed if they are not - get them here:
HTCDriver.exe
Download Link
MD5: 7fe1a01a816722718c6d369a3dc49166
Size: 13.08 MB
...and these are the same drivers that originally came on the SDcard of the doubleshot when you first got it. If you lost them, you can grab them again.
Enjoy!

Sensation 4G Boot Problems

I was attempting to root my phone and I believe my system files are now deleted or corrupted (This is my best guess from what I have read online) as my phone will not get past the boot screen which is the white background with the "htc" logo. I am able to hit the down volume button with the power button to see the screen where you see the following:
-Revoluntionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.17.1111
I have the PG58IMG.zip file on my SD Card and when in the above screen, it gives me the prompt "Do you want to start update?". I hit yes, it shows a successful update but when you reboot, it still refuses to boot the phone past the "htc" logo screen. I must admit that I did not do enough research before attempting this "Root" and I'm having difficultly understanding what to do next. If possible, I would like to get the phone back to factory setting. Any help would be greatly appreciated!

Otahy said:
I have the PG58IMG.zip file on my SD Card and when in the above screen, it gives me the prompt "Do you want to start update?". I hit yes, it shows a successful update but when you reboot, it still refuses to boot the phone past the "htc" logo screen. I must admit that I did not do enough research before attempting this "Root" and I'm having difficultly understanding what to do next. If possible, I would like to get the phone back to factory setting. Any help would be greatly appreciated!
Click to expand...
Click to collapse
#1 - do you have a custom recovery installed?
#2 - remove the PG58IMG.zip file from your SD card or you will never be able to get past the bootloader.
#3 - if you REALLY want to go back to factory, you will need to install an official HTC RUU.

Thanks for the response JWhipple. Here are your answers:
1: Custom Recovery is installed, I've tried 2 different ones, still refuses to boot.
2: I have removed the zip file from the SD Card, still refuses to boot.
3: I haven't tried the HTC RUU yet because I still can't get the phone to boot.

If you boot the phone into bootloader mode you should be able to run the RUU. Someone please correct me if I am wrong!

Otahy said:
Thanks for the response JWhipple. Here are your answers:
1: Custom Recovery is installed, I've tried 2 different ones, still refuses to boot.
2: I have removed the zip file from the SD Card, still refuses to boot.
3: I haven't tried the HTC RUU yet because I still can't get the phone to boot.
Click to expand...
Click to collapse
Do a full wipe from recovery.....including the /system and /boot. Then reflash your ROM. Also, ensure your using the correct firmware for the ROM your using.
Sent from my FireStorm StockMod (Release Date 5.18.2012) Sensation 4G

I have a similar problem, except that my update failed!! Can I just delete the firmware file and the phone will get back to normal????

The easiest way to solve your issue, providing you DO have a custom recovery e.g. 4EXT or Clockwork, would be to go to the Sensation Android Development sub-forum, find an appropriate ROM, and then flash it through recovery. There are many tutorials online explaining this. Alternatively you could search for "Sensation 4g RUU" which is basically the official program for PC which restores the stock firmware of the device. You do need to get the correct one for the 4G Sensation or you could experience some issues.

try use fastboot to install recovery
http://forum.xda-developers.com/showthread.php?t=1599816
see if got to recovery, if work then u need to install new rom
if not work, just run ruu
http://d-h.st/lrt

I will send him a link to fix it
Sent from my HTC Sensation 4G using xda premium

Thanks you very much for all the input on my problems with my phone! It's nice to see a friendly and helpful community here! I'll start with the new ROM now and update you guys shortly.

Hey tragik74, when you say "run RUU", how exactly do you run it? The only method I see for running anything is to make a PG58IMG.zip file and install that on a SD Card. Which I'm a having an issue with since now my phone shows locked but still has S-OFF.

tragik74 said:
try use fastboot to install recovery
http://forum.xda-developers.com/showthread.php?t=1599816
see if got to recovery, if work then u need to install new rom
if not work, just run ruu
http://d-h.st/lrt
Click to expand...
Click to collapse
When you say "run ruu", how exactly do you do that? the only thing I can see to run anything is to use the PG58IMG.zip file method on your SD Card.

[Q] HTC One S Root OTA Update Questions

Hello Everyone,
As of today, my phone received the new OTA Update for my HTC One S. However, obviously I cannot update due to my phone being rooted. As a person who is still relatively new with rooting (about a month rooted with my phone-first time), I have a couple questions.
First and foremost, have you guys enjoyed the OTA Update so far? I have read about the list of improvements, and they look promising.
Secondly, I obviously want to stay rooted, are there any suggestions about how to update and then have my phone rooted? Preferably without losing my root, but I don't think that's possible.
Thirdly, I saw a thread about the viper (I believe that's what it's called) rom and that could be my possible solution. But, I am rooted on stock rom and have never put on another rom before. So what are your thoughts on this rom?
Thanks in advance
Sent from my HTC VLE_U using xda app-developers app

Problem Fixed
DrOfLife said:
Hello Everyone,
As of today, my phone received the new OTA Update for my HTC One S. However, obviously I cannot update due to my phone being rooted. As a person who is still relatively new with rooting (about a month rooted with my phone-first time), I have a couple questions.
First and foremost, have you guys enjoyed the OTA Update so far? I have read about the list of improvements, and they look promising.
Secondly, I obviously want to stay rooted, are there any suggestions about how to update and then have my phone rooted? Preferably without losing my root, but I don't think that's possible.
Thirdly, I saw a thread about the viper (I believe that's what it's called) rom and that could be my possible solution. But, I am rooted on stock rom and have never put on another rom before. So what are your thoughts on this rom?
Thanks in advance
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Hey Dr.
I had the same issue and fixed it. I'm enjoying the OTA update...seems snappier and the option to change the menu button and get rid of that eyesore at the bottom of the screen is great....See this post on how to fix it:
http://forum.xda-developers.com/showthread.php?p=32069130
All you have to do is download the stock recovery (link located in the post above), rename it "Recovery.IMG" and put it in the /Data/Recoveries folder that your All In One Kit uses. Then open up the All In One root kit, flash the stock recovery, and reboot your phone. It should look the same, and give you the same notification that an update is available. Install the update, and then reflash your TWRP or CWM and reroot (the OTA unroots the device, so you need to reinstall SuperSu.
Thanks to all the people that have helped me do the same!!!

fsustrength said:
Hey Dr.
I had the same issue and fixed it. I'm enjoying the OTA update...seems snappier and the option to change the menu button and get rid of that eyesore at the bottom of the screen is great....See this post on how to fix it:
http://forum.xda-developers.com/showthread.php?p=32069130
All you have to do is download the stock recovery (link located in the post above), rename it "Recovery.IMG" and put it in the /Data/Recoveries folder that your All In One Kit uses. Then open up the All In One root kit, flash the stock recovery, and reboot your phone. It should look the same, and give you the same notification that an update is available. Install the update, and then reflash your TWRP or CWM and reroot (the OTA unroots the device, so you need to reinstall SuperSu.
Thanks to all the people that have helped me do the same!!!
Click to expand...
Click to collapse
I keep flashing the stock recovery with all-in-one and then downloading and installing the update. Everytime, about halfway it goes back to the red triangle with the exclamation point and restarts the phone five minutes later.
I check software and its still 4.0.3 and the update redownloads. I've tried several "stock recoveries" and the update afterwards... never works.

TheAdictsPunk said:
I keep flashing the stock recovery with all-in-one and then downloading and installing the update. Everytime, about halfway it goes back to the red triangle with the exclamation point and restarts the phone five minutes later.
I check software and its still 4.0.3 and the update redownloads. I've tried several "stock recoveries" and the update afterwards... never works.
Click to expand...
Click to collapse
I have also tried the steps and have run into the same problem. All is well when I flash into recovery, but when the phone starts updating about quarter or half-way through it also gives me the same red error message and the phone restarts soon after with no update. I have tried several times with the same problem.
However, thanks fsustrength for the instructions, before I was getting no where, but now I almost got it
Sent from my HTC VLE_U using xda app-developers app

ckpv5 said:
As there are many questions on how to do OTA update & to revert to stock after a device is rooted and bootloader unlocked; I made this simple guide which I hope will help the newbies especially.
NOTE : always do a backup and a nandroid backup before trying any of these.
OTA update:
A) ROM is stock, bootloader unlocked, stock recovery and not rooted.
- just run the OTA update, there is no need to relock the bootloader
B) ROM is stock, bootloader unlocked, CWM recovery and not rooted.
- flash the stock recovery that comes with your RUU, extract the RUU for the stock recovery.
* boot to bootloader
* fastboot flash recovery recovery_signed.img
* fastboot reboot-bootloader
* fastboot erase cache
* fastboot reboot
- run the OTA update
C) ROM is stock, bootloader unlocked, stock recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- run the OTA update, there is no need to relock bootloader
- Once done, run OTA Rootkeeper and click restore root
D) ROM is stock, bootloader unlocked, CWM recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- no need to relock bootloader
- boot to bootloader and fastboot flash the stock recovery
- run the OTA update
- Once done, run OTA Rootkeeper and click restore root
E) ROM is custom, bootloader unlocked, CWM recovery and rooted and you have a stock nandroid backup
- flash the stock boot.img if after nandroid restore, you have a bootloop
- flash the stock recovery.img
- relock the bootloader - fastboot oem lock
- boot your device and run the OTA update
F) ROM is custom, bootloader unlocked, CWM recovery and rooted and you don't have a stock nandroid backup
- if you dont have the stock nandroid backup, you need to run RUU
- before you can run the RUU you need to:
* flash the stock recovery.img
* flash the stock boot.img (maybe no need)
* relock the bootloader - fastboot oem lock
* run RUU
- run device setup
- run the OTA update
Flashing RUU to revert to stock or to update your One V after you have a custom ROM installed.
- you must have the correct RUU for your device.
- if you are not sure, download CID Getter from Play Store and run it, it will show your CID.
- with your CID, you may be able to find a correct RUU for your device
then (even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- flash RUU
Note : for people with ERROR 155 UNKNOWN ERROR they need to go into HBOOT and select FASTBOOT and run the RUU to revert to stock (thanks Lloir)
And usually:
Error 155 - usually wrong recovery.img /wrong boot.img
Error 140 - wrong bootloader / bootloader unlocked
Error 131 - wrong RUU for your device
Credit to all XDA members that posted all the guides in various forum thread and some from own experience which I compiled here for easy reference.
Click to expand...
Click to collapse
Some wonderful person wrote a guide for the One V. Every though it's not the same phone the rules are the same. If these instructions help you click the link and thank the guy for writing it.
http://forum.xda-developers.com/showpost.php?p=27288357&postcount=1

Wow, that is a very useful guide right there! However, while reading the guide, Step D is exactly what both TheAdictsPunk and I seem to have done (I'm making an assumption that he did). I did in fact have and used the root keeper app, put it on temporary unroot, and flashed the stock rom and ran the update. Yet, I still run into the problem of the red error sign. I'm sure there is a factor that maybe could cause it to stop, but I cannot put a finger on it.
However, I did notice something while following the procedures of the guide on my phone. When I flash the stock rom on my phone, I have to re-download the system update. While downloading the system update I notice that some of my apps get root permissions from SuperSu in the background, even though in root keeper I temporarily took off root. Rootkeeper also states that my phone is unrooted. Could this problem cause the red error message? If so, any way to fix it?
Sent from my HTC VLE_U using xda app-developers app

DrOfLife said:
Wow, that is a very useful guide right there! However, while reading the guide, Step D is exactly what both TheAdictsPunk and I seem to have done (I'm making an assumption that he did).
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
I did! Last night I even tried flashing the recovery image through fastboot instead of the all-in-one kit. Then, even, the recovery image wouldn't flash all the way through... maybe our phones are having a problem with the recovery being reflashed and not the update at all.

I had the same exact issue. I finally got fed up and just flashed the RUU with my computer and then just used the All-in-one program to re-root. I am now enjoying 2.31 and really glad I updated. Obviously the RUU wipes everything, but I had done a full backup using Titanium Backup, and then restored all the important settings and data (like accounts, wifi list, bookmarks, dictionary, etc.) (but not the system apps themselves! ) and it worked out pretty well. Still had some things to adjust, like sounds and such. If you want to keep your SMS's use the built-in backup in the messaging app, then restore after the update.. more reliable than any other app I've tried.

mmceorange said:
I had the same exact issue. I finally got fed up and just flashed the RUU with my computer and then just used the All-in-one program to re-root. I am now enjoying 2.31 and really glad I updated. Obviously the RUU wipes everything, but I had done a full backup using Titanium Backup, and then restored all the important settings and data (like accounts, wifi list, bookmarks, dictionary, etc.) (but not the system apps themselves! ) and it worked out pretty well. Still had some things to adjust, like sounds and such. If you want to keep your SMS's use the built-in backup in the messaging app, then restore after the update.. more reliable than any other app I've tried.
Click to expand...
Click to collapse
I'm strongly considering doing that, I can back all my contacts and apps and sms messages via Mobile Go. So, wiping my phone isn't too big of an issue for me because I can restore almost everything I need back on my phone. If you don't mind me asking, where did you get the source that you got the RUU? Also, I have never flashed an ruu before so is their a guide for our phone to flash a RUU?
Sent from my HTC VLE_U using xda app-developers app

DrOfLife said:
I'm strongly considering doing that, I can back all my contacts and apps and sms messages via Mobile Go. So, wiping my phone isn't too big of an issue for me because I can restore almost everything I need back on my phone. If you don't mind me asking, where did you get the source that you got the RUU? Also, I have never flashed an ruu before so is their a guide for our phone to flash a RUU?
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
http://www.lastnite.de/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5.exe
Links to downloads are on that page.. just copy/paste.
Basically start your phone in fastboot, connect to usb, then run the ruu with admin privileges. Make sure you are on stock recovery, and already have the USB drivers installed on your PC (unless you're on Linux.. already has them.. and maybe Mac too?)

mmceorange said:
http://www.lastnite.de/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5.exe
Links to downloads are on that page.. just copy/paste.
Basically start your phone in fastboot, connect to usb, then run the ruu with admin privileges. Make sure you are on stock recovery, and already have the USB drivers installed on your PC (unless you're on Linux.. already has them.. and maybe Mac too?)
Click to expand...
Click to collapse
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Sent from my HTC VLE_U using xda app-developers app

DrOfLife said:
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Click to expand...
Click to collapse
Ok I figured out a couple answers to my questions. One, the Europe version and the T-Mobile Version are different. That explains why the RUU did not work and gave me Error 130. However, the T-Mobile RUU, RUU_Ville_U_TMOUS_1.84.531.2_R2_Radio_0.16.31501S, is the alternate version that also recieves the OTA update. The RUU is found here http://androidforums.com/one-s-all-things-root/560329-ruu-download-mirrors.html
Then, following the steps, I have successfully updated my phone to the newer softeware!
But of course, I run into another problem.... The CWM recovery does not work for my phone. I flashed the recovery via the HTC One S All-in-One Toolkit. But when getting my phone into recovery mode, it "crashes." (By crashes I mean the phone will go into the htc developmental screen, then turn to black, then reload the normal bootup screen and boot normally up) So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?

Rerooting
DrOfLife said:
So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?
Click to expand...
Click to collapse
I'm still running stock 1.84, but I'm rooted and unlocked. I do not have any kind recovery like CWM or TWRP. You may have to flash a stock recovery image in order to re-install the recovery of your choice. If you want to get rooted again try this method: http://forum.xda-developers.com/showthread.php?t=1577831 It's what I used to gain root. It's a rather easy to follow guide. I used this instead of the AIO kit.
I'm going to try and revert to locked and unroot in order to get the update. Wish me luck.

DrOfLife said:
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Oh lol sorry about that.
DrOfLife said:
Ok I figured out a couple answers to my questions. One, the Europe version and the T-Mobile Version are different. That explains why the RUU did not work and gave me Error 130. However, the T-Mobile RUU, RUU_Ville_U_TMOUS_1.84.531.2_R2_Radio_0.16.31501S, is the alternate version that also recieves the OTA update. The RUU is found here http://androidforums.com/one-s-all-things-root/560329-ruu-download-mirrors.html
Then, following the steps, I have successfully updated my phone to the newer softeware!
Click to expand...
Click to collapse
Awesome!
DrOfLife said:
But of course, I run into another problem.... The CWM recovery does not work for my phone. I flashed the recovery via the HTC One S All-in-One Toolkit. But when getting my phone into recovery mode, it "crashes." (By crashes I mean the phone will go into the htc developmental screen, then turn to black, then reload the normal bootup screen and boot normally up) So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?
Click to expand...
Click to collapse
I personally have never encountered that before, so I am of little help here. The suggestion above me sounds like the right direction though.

Red triangle error
dc211 said:
Some wonderful person wrote a guide for the One V. Every though it's not the same phone the rules are the same. If these instructions help you click the link and thank the guy for writing it.
http://forum.xda-developers.com/showpost.php?p=27288357&postcount=1
Click to expand...
Click to collapse
I'm using method C, i still get that red triangle error. Also i can't get the ruu for my phone. I'm desperate can you please help me.

lonegunman0 said:
I'm using method C, i still get that red triangle error. Also i can't get the ruu for my phone. I'm desperate can you please help me.
Click to expand...
Click to collapse
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!

skidmarc11 said:
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!
Click to expand...
Click to collapse
If this many people are running into this problem, maybe we can get a role call of whose using what method, if not stock ROM what custom they are using, and what carrier they us?
I'm stock ROM, Stock Recovery, and Tmobile US. I used Method C.
I'm wondering if they have changed the update in a way that is preventing some people from updating. like it detects a certain file before update or something idk. I'm not any sort of advanced android user so I am probably wrong, but it's the first thing that comes to mind. Otherwise, maybe they sent out a bad update file, but I feel like that probably wouldn't be the case since it's been happening for a couple days now.
Thought's ideas anyone, or am I alone in any of these thoughts?

Stock rom
mylegiscramped said:
If this many people are running into this problem, maybe we can get a role call of whose using what method, if not stock ROM what custom they are using, and what carrier they us?
I'm stock ROM, Stock Recovery, and Tmobile US. I used Method C.
I'm wondering if they have changed the update in a way that is preventing some people from updating. like it detects a certain file before update or something idk. I'm not any sort of advanced android user so I am probably wrong, but it's the first thing that comes to mind. Otherwise, maybe they sent out a bad update file, but I feel like that probably wouldn't be the case since it's been happening for a couple days now.
Thought's ideas anyone, or am I alone in any of these thoughts?
Click to expand...
Click to collapse
skidmarc11 said:
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!
Click to expand...
Click to collapse
Yes i agree about the file detection. I'm running stock rom but i think i've just realised my problem. Although i have a stock rom my problem is that the stock rom i'm running is deodexed. I read somewhere that if the stock rom is tweaked in any way or if any bloatware is deleted you can't get OTA updates.
Hope this helped

Wouldn't an RUU fix any of those problems?

Yes it would
Sent from my HTC One S using xda app-developers app

[Q] Totally stuck - Desire S. cant boot :(

Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
HTC Desire S GSM
unclocked via htcdev
S-ON
hboot: 2.02.0002
Radio: 3831.19.00.110
Latest CMWR
Gets stuck @ white screen
Tried:
factory reset / wipe / dalvik / batt stats
reboot to recovery: install SU, gapps, cwm rom 10.1 (also tried 7.1). reboot / then fastboot boot boot.img (from the CWM zip). nothing.
Ive tried re installing the EU RUU - also nothing. Renaming the rom.zip to PG**IMG.zip, it reading the file then stops 2 fastboot screen. nothing. nada.zip.

fstarockr said:
Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
Click to expand...
Click to collapse
There are so many people, blindly walking in to troubles just because they do not read,
and you seem to be one of them....
When you unlock your device via htc dev, your device stays s- on,
it means- whatever you flash, you have to flash boot.img from that thing ( meaning rom naturaly )
via fastboot
through command:
fastboot flash boot boot .img
Without it your phone will never boot...
Recovery you flash via fastboot as well via command:
fastboot flash recovery recovery.img
Then , when you have it, reboot your device to recovery
and flash superuser and its binaries
And that woud be all you have to do in order to have rooted and booting device...
Edit: Now i've seen your other post- it is a 100% the one im reading now,
You should know it is enough to post your question once,
people'll find it...
Because of impatience you're in trouble already with your phone

tx -
tx for that info - ill give it a go.
I reposted because some1 there said i was in the wrong section and supplied a link for the correct section (here) - so yes, i reposted to get the correct replies.
not to digress:
but as for not reading - i can assure u ive read alot. Been a freelance developer for 15 years. That doesnt mean that rooting often requires a handful of little hacks when things dont go smooth. Just like alot of programming tuts, the rooting ones have a similar "assumption" that u know whats half potting, and what will cause what and what wont. All the articles i read i made sure were either 2012 or 2013 - there is ALOT of old non applicable info around, I stick to xda of course as i really trust this place. as usual, not all is 1-2-3. thats all.
asgardr said:
There are so many people, blindly walking in to troubles just because they do not read,
and you seem to be one of them....
When you unlock your device via htc dev, your device stays s- on,
it means- whatever you flash, you have to flash boot.img from that thing ( meaning rom naturaly )
via fastboot
through command:
fastboot flash boot boot .img
Without it your phone will never boot...
Recovery you flash via fastboot as well via command:
fastboot flash recovery recovery.img
Then , when you have it, reboot your device to recovery
and flash superuser and its binaries
And that woud be all you have to do in order to have rooted and booting device...
Edit: Now i've seen your other post- it is a 100% the one im reading now,
You should know it is enough to post your question once,
people'll find it...
Because of impatience you're in trouble already with your phone
Click to expand...
Click to collapse

Well thats true, obvious things for me do not have to be obvious for
somebody else- one sometimes forgets that- begging your pardon
If not for XDA, i'd've known not much at all...
I've given the shortest and simpliest way that never failed me before
so, i truly hope, for you it'll turn out to be usefull as well- with no further accidents...
As for comming back to stock: you must relock device's bootloader before flashing,
otherwise procedure will always be throwing an error....
Success

details details
As for coming back to stock: you must relock device's bootloader before flashing,
otherwise procedure will always be throwing an error....
Im trying to get a picture of the inter relations ~ pls bear with me:i dont want to be trying to sys c: when i dont have a partition kind of scenario - absolute clarity is needed - my apologies as i try wrap this up..
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
#S-on/Off
I have been unable to get mine to off -
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Im trying to figure out what i can do once, and what i have to keep fiddling with, so i can hone in and get up and running.
If my questions appear ignorant - then ignore me. Im trying to paint a very clear picture of the tech relations between the various aspects and how they relate / interact - which is crucial to moving on from noobness - so pls bear with me and drop the remarks / attitude. Ive read my a$$ off and am still unclear for what many assume is basic understanding.
Im sure there are ALOT of sane unlazy logic ppl out there stuck in the same boat - and sometimes ppl who are VERY knowledgeable get a bit semi-aggressive putting ppl off from asking questions.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Success[/QUOTE]

fstarockr said:
Hi all. Ive finally managed to get a grasp of the principles of adb, shell, fastboot, etc.
Anyways - I have a Desire S which I unlocked via htcdev, and installer the lastest clockworkmod recovery. ive been trying to get S-off and nothing has worked for me. Ive spent the last 2 days downloading so much stuff my desktop if full of it - and im nowhere.
I had ICS for htc running before without any mods and wanted to try the root / mod thing.
My phone hangs at the htc boot screen. I have tried installing 3 different cw10.1 zip files all from xda to no avail, they always give me an error. Ive tried running the RUU exe and it ends in an error. I then fund the rom.zip file in the directory and renamed it to PB99IMG.zip, dropped it in root of sdcard and nothing.. it just skips past the lines and goes to fastboot. Should it not be named PB88IMG.zip? I recall seeing those numbers flit past.
Is it possible to force the bastard phone to take cwm this way by renaming the zip? (Ive read no - its only for official RUU's).
anyway - the oneclick didnt work, nor did ver1, ive tried various shell methods (which i cant even recall). Im currentlyunlocked, S-ON, firmware 20.2.2000 or something (the one that revolutionary WONT work on).
Ive been chasing my tail and just gave up.
please give me some info as to what i could have dobe wrong. I installed clockwork via lpay store. I factory reset, cleared caches and batt logs and was able to go into the OS a few times - but obviously one of the methods i tried did something.
thanks again great forum, but honestly, what a complete mess!! there are so many approaches with so many pitfalls its crazy.. esp for a noob when the noob apps dont work either!
HTC Desire S GSM
unclocked via htcdev
S-ON
hboot: 2.02.0002
Radio: 3831.19.00.110
Latest CMWR
Gets stuck @ white screen
Tried:
factory reset / wipe / dalvik / batt stats
reboot to recovery: install SU, gapps, cwm rom 10.1 (also tried 7.1). reboot / then fastboot boot boot.img (from the CWM zip). nothing.
Ive tried re installing the EU RUU - also nothing. Renaming the rom.zip to PG**IMG.zip, it reading the file then stops 2 fastboot screen. nothing. nada.zip.
Click to expand...
Click to collapse
i think u have MDDI pannel (not the one compatible with cianogen) try to flash a sense rom
have a look of THIS

Hi
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
Click to expand...
Click to collapse
On HTC devices, the bootloader is called HBOOT. This is a 100% device-specific program whose sole purpose is to initialize the hardware so that an operating system (such as Android, i.e. Linux) can load. If your bootloader is damaged, your device is 100% bricked.
To prevent tampering with the system, HTC have locked ("S-ON") their bootloaders so that they won't accept unsigned ROM images. So, on your HTC phone, you cannot install any operating system other than what's provided by HTC. You can partially lift these restrictions by unlocking via htcdev, as you have, or you can fully lift all restrictions on your device by going S-OFF. S-OFF-ing the Desire S is done by exploiting a bug in HBOOT version 0.98 and overwriting the bootloader with a patched version ("Revolutionary") that has all write protection disabled.
In order to flash official HTC upgrade packages ("RUU"s), you can be either S-ON or S-OFF, but if you're S-ON you MUST lock the bootloader. Anything that's not a RUU can (only) be flashed without re-locking the bootloader.
Having an unlocked bootloader is only relevant when flashing new ROMs or recoveries. Having an unlocked or locked bootloader per se will not affect booting at all, with one well-known exception: if you're S-ON and htcdev unlocked, the write protection installed by the bootloader is still on for the bootloader, radio, and kernel partitions. This means that you can't flash kernels from a running OS -- only from the bootloader. This means that when you flash a custom ROM, it will not be able to flash the kernel automatically, you have to do that manually via fastboot. Failing to do that will result in your phone freezing on the white HTC screen when it tries to boot.
#S-on/Off
I have been unable to get mine to off -
Click to expand...
Click to collapse
That's expected, because you're most likely not running a ROM that has a HBOOT version that is vulnerable to the exploit used by Revolutionary.
edit: nope, your HBOOT is newer than 0.98 and is therefore not exploitable.
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
Click to expand...
Click to collapse
Only official HTC RUUs require that the bootloader be locked.
Cyanogenmod can only be installed with the bootloader unlocked, but you may always re-lock after installing it. Remember to manually flash the boot.img (that's the kernel) via fastboot directly after flashing CM through your custom recovery.
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
Click to expand...
Click to collapse
A RUU is a *complete* software package for your device made by HTC. It contains everything from bootloader to operating system. I don't really know what else you're trying to ask, so please elaborate.
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Click to expand...
Click to collapse
The recovery is a specialized mini-Android OS that allows you to flash new software (such as unofficial ROMs such as CM) to your device. What recovery you have installed has no bearing on your main OS. If you're htcdev unlocked, the only way you can install a custom (i.e. non-stock and non-crippled) recovery is via fastboot; if you're S-OFF you can use the 4EXT updater app from Google Play.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
Click to expand...
Click to collapse
Why do you want to install stock?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Click to expand...
Click to collapse
boot.img is inside the zip of the ROM you're going to flash.
I hope I've been able to answer most of your questions. If you require more help, please search first, and if you can't find what you're looking for, please do ask.

fstarockr said:
Im trying to get a picture of the inter relations ~ pls bear with me:i dont want to be trying to sys c: when i dont have a partition kind of scenario - absolute clarity is needed - my apologies as i try wrap this up..
#bootloader:
do the same rules apply for ALL installations? Does bootloader have to be locked FOR anything to boot or just the stock OS's? does it have to be in a sequence - ie do i have to do this each time i try install an OS or can i leave it? Will this break the booting if its wrong? Can i use a bootloader from company X and a rom from company Y? What files do i use/extract/where do i get them, and are they device specific - what r the base requirements?
#S-on/Off
I have been unable to get mine to off -
#unlocked bootloader
its been indicated that this will throw off a stock OS installer, will cyanogenmod work with this off?
#RUU / Mods
I assume these are the OS's - do i have to do this last/middle? and steps after? to duplicate: are they linked to the bootloader?
#recovery
this is just an upgrade to the stock junk and has no effect on booting, etc. can be left in place if working. can install via play or fastboot via zip. (and other methods im sure).
Im trying to figure out what i can do once, and what i have to keep fiddling with, so i can hone in and get up and running.
If my questions appear ignorant - then ignore me. Im trying to paint a very clear picture of the tech relations between the various aspects and how they relate / interact - which is crucial to moving on from noobness - so pls bear with me and drop the remarks / attitude. Ive read my a$$ off and am still unclear for what many assume is basic understanding.
Im sure there are ALOT of sane unlazy logic ppl out there stuck in the same boat - and sometimes ppl who are VERY knowledgeable get a bit semi-aggressive putting ppl off from asking questions.
So do i relock the bootloader before i install any mod - or is this for stock only? And do install stock first, or can i relock and follow the steps above to root / get cwm 10.7 or 7.1 running?
lastly - where do i get the boot.img from? is that device specific or can i extract it / dl it? reason im asking is because it appears this file is device specific - and needs to be backed up from stock device before rooting/unlocking etc?
Click to expand...
Click to collapse
# bootloader
The bootloader must be locked to install an RUU (stock rom), it must be unlocked to install a custom rom.
# s-on / s-off
If you unlock your bootloader through htcdev.com, the phone stays s-on. This means you can't install a different radio or hboot (mostly not necessary anyway), or write to the /boot partition or recovery apart from in fastboot.
That means, after every rom installation, you have to reboot to bootloader (fastboot), and flash the boot.img (extracted from the rom you installed)
# recovery
A custom recovery is a must for flashing custom roms (it's where you flash the zips) , I recommend 4ext, other known recoveries are Cwm and twrp. Be aware that you can only flash recoveries in fastboot (not through an app) , if your device is s-on

1.s-off means you can flash anything you want to all partitions on the phone..
S- on (htc dev unlocked) bootloader is unlocked so you gain acces to system partition,
but neither to radio partition nor bootloader itself, so you cannot freely change them at will.
While flashing rom via recovery, ( when s-on) each time you'll have to flash boot.img of that rom -via fastboot as well, because kernel partition is not reachable from recovery ,
Boot img is to bo found in the rom zip ( namely boot.img).
and is absolutely necessary to flash that particular one
or, if existing- other that is compatible with rom of you choice and phone model..
Assuming- to flash any custom:
-bootloader has to be unlocked
-you need custom recovery ( 4ext or clockworkmod)
-rom is packed in zip format ( flashing via recovery)
-each time you change roms, you have to flash boot img of that particular rom,
( to be found inside that rom.zip)
from recovery must reboot to bootloader (adb reboot bootloader)
then flash boot.img...
If it says ok you may now begin booting in to system
Recovery:
To flash anything like roms or mods etc.
custom recovery is required,
stock htc recovery is been there for slightly different purpose,
and is, well.. rather useless for any device customizing...
1.when s-on: is necessary to flash recovery via fastboot-as an < .img > file
so, when it is zipped- extract the file: xxxyy_recovery .img,
change its name just to recovery.img, and flash it...
2.when s-off : is possible to update it via market app (but only when s-off)
RUU: is a stock phone image, and ussualy contains radio and bootloader itself,
flashing it, may upgrade your device's components that normally -while s-on-
you'd not be able to touch, but there is a price:
1.you must relock bootloader: fastboot oem lock
otherwise you'll always be getting an error
(but if you still keep unlock_token from htc dev-can unlock it again)
2.you must establish
A) your device's CID - Customer IDentification number (whether is generic or carrier branded)
B) your phone's software version region ( wwe or asia or..etc)
C) software version ( froyo, gb, ics )
because, normally bootloader will not let you flash lower RUU version
than itself,
( every RUU contains bootloader, so the one working on the device
will never let downgrade itself- well not without a little trick of course-this is XDA)
Bootloader:
It is advised to use only bootloaders for your device- if you try to flash something slse,
you'll end up with a dead phone ( no fastboot no nothing- paperweight)
While s-on you cannot upgrade bootloader in any other way but by flashing official RUU...
While s-off it is possible to write to bootloader partition ( but always a bit risky)
There are:
- stock bootloaders
- patched ( revolutionary )
- eng bootloaders ( modified - possible to overwrite it by different one in case it is necessary)...
...well... now, there is much more to it if one wants to know everything
if there is something you'd like to know in particular- write back...

fantastic answers and explanations last 3 chaps!!!!
Guys - excellent answers thank you SO much! i have a MUCH better idea now thanks to your no attitude clear answers! I think this should be a sticky as it clears SOOO much confusion for a multitude of users - and fills the forums with the same problems over and over - simply because ppl lack this base understanding b4 opening the darn prompt lol (like me!!)
So to recap"
While flashing rom via recovery, ( when s-on) each time you'll have to flash boot.img of that rom -via fastboot as well, because kernel partition is not reachable from recovery ,
Click to expand...
Click to collapse
so by following these directions:
Assuming- to flash any custom:
-bootloader has to be unlocked
-you need custom recovery ( 4ext or clockworkmod)
-rom is packed in zip format ( flashing via recovery)
-each time you change roms, you have to flash boot img of that particular rom,
( to be found inside that rom.zip)
from recovery must reboot to bootloader (adb reboot bootloader)
then flash boot.img...
If it says ok you may now begin booting in to system
Click to expand...
Click to collapse
im basically working around the S-On / kernel & partition issue i take it?
Im gonna try all this now - reason i wanted to flash stock
Why do you want to install stock?
Click to expand...
Click to collapse
is so that i can apply the earlier exploits to gain S-Off - but ill try the steps above and see.
fwiw - at this point im only downloading roms specifically for my phone - its my 1st so im going with stable ones, cyanogen for now. Once I have a better grip ill explore after that
btw:
A RUU is a *complete* software package for your device made by HTC. It contains everything from bootloader to operating system. I don't really know what else you're trying to ask, so please elaborate.
Click to expand...
Click to collapse
I was trying to figure out if the OS / roms / RUU had to be tied to boot images - as it appears they do, and whether there was a specific sequence to installing them). Since u clarified the RUU's are all-in-ones i guess the installer takes care of that, where as the others have pointed out - flashing custom roms require the boot.img to be flashed AFTER installing the rom - not the best question i admit!!
If your bootloader is damaged, your device is 100% bricked.
Click to expand...
Click to collapse
So if i can access fastboot etc then i can assume mine is fine right?
Thanks again guys - if there was a ribbon bar instead of just thanks id hit all of u a few times - im SURE many noobs will find all this info really really helpful. Its hard to tie the parts together and get an idea of how they all fit - its really puzzling.. and I know u gotta break something before u really understand it - but its nice to avoid this if possible!
Ill keep u posted on progress/results

no luck .... yet
got it working guys - had to flash boot img BEFORE rom, not after.
cyanogen mod 10.1 running on Desire s.
2 days of pain over

fstarockr said:
so by following these directions:
im basically working around the S-On / kernel & partition issue i take it?
Click to expand...
Click to collapse
Exactly.
Im gonna try all this now - reason i wanted to flash stock
is so that i can apply the earlier exploits to gain S-Off - but ill try the steps above and see.
Click to expand...
Click to collapse
That's a valid reason, but in that case you don't need to flash a custom rom first. You just need to use misc_version to lower your mainversion (a fastboot variable) and then you must flash an old (exploitable) RUU. There are numerous guides on how to do this.
I was trying to figure out if the OS / roms / RUU had to be tied to boot images - as it appears they do, and whether there was a specific sequence to installing them). Since u clarified the RUU's are all-in-ones i guess the installer takes care of that, where as the others have pointed out - flashing custom roms require the boot.img to be flashed AFTER installing the rom
Click to expand...
Click to collapse
Correct, but only if you're S-ON and htcdev unlocked. If you're S-OFF the recovery has no problem writing the boot image by itself.
So if i can access fastboot etc then i can assume mine is fine right?
Click to expand...
Click to collapse
Hell, the mere fact that you can turn on your device means your bootloader is fine
got it working guys - had to flash boot img BEFORE rom, not after.
Click to expand...
Click to collapse
No you don't? The order doesn't matter, as long as you've flashed both.

HTC One SV Revert to Stock Help (for update)

Hi All,
Of course the first thing I did after getting my new HTC One SV is root it and install LBE privacy protection to stop data leakage. However recently ive been getting a notification of an update to jelly bean through my phone provider (Vodafone Australia). However this will not install due to custom recovery image so the pre-install check fails. I cannot find stock recovery images anywhere and even if I did, due to presence of clockwork mod cant push images via Android SDK (skips straight past hboot to clockworkmod so isn't detected as an available device).
Can anyone help me get my phone back in a state where I can install the new update and the re-root?
Am not 100% noob, am familiar with custom roms and basics required to root and use SDK, this is my 3rd android device ive played with so hopefully this question is not tooooo SIGH.
Seems like HTC one SV is too new to have its on page in XDA support?

Try find here something or sombody who can help. http://forum.xda-developers.com/showthread.php?t=2292432
Wysłane z mojego HTC One SV

Not helpful
marceli-szpak said:
Try find here something or sombody who can help. http://forum.xda-developers.com/showthread.php?t=2292432
Wysłane z mojego HTC One SV
Click to expand...
Click to collapse
Hi there,
Unfortunately I don't have permission to post messages in that thread, nor does it seem the appropriate place to ask my question as it is an area for resources not help.

You must have 10 posts to write in some threads. Try ask in thread root for One sv. Have you bootloader unlocked ? What is your hboot number? For now when you update to JB via OTA you can't make s-off and next you can't back to previous hboot version.
Wysłane z mojego HTC One SV

RE HTC One SV Revert to Stock Help (for update)
marceli-szpak said:
You must have 10 posts to write in some threads. Try ask in thread root for One sv. Have you bootloader unlocked ? What is your hboot number? For now when you update to JB via OTA you can't make s-off and next you can't back to previous hboot version.
Wysłane z mojego HTC One SV
Click to expand...
Click to collapse
Yes bootloader is unlocked, I have clockworkmod working, in fact I think that is the problem. If I could get back to original recovery image I think the OTA would work
HBOOT number is 1.01.000

snorglamp said:
Yes bootloader is unlocked, I have clockworkmod working, in fact I think that is the problem. If I could get back to original recovery image I think the OTA would work
HBOOT number is 1.01.000
Click to expand...
Click to collapse
What you have to do is, download the OTA Update (will be located to sdcard/download/), copy to pc and unzip it. You will find another firmware.zip, there is the jelly bean recovery inside. Flash this JB recovery over fastboot.
Boot.img/Kernel also have to be stock and maybe bootloader also locked (for this i'm not sure), then you should be able to install JB.
But think about, if you need S-Off, cause you only get this on ICS.

old.splatterhand said:
What you have to do is, download the OTA Update (will be located to sdcard/download/), copy to pc and unzip it. You will find another firmware.zip, there is the jelly bean recovery inside. Flash this JB recovery over fastboot.
Boot.img/Kernel also have to be stock and maybe bootloader also locked (for this i'm not sure), then you should be able to install JB.
But think about, if you need S-Off, cause you only get this on ICS.
Click to expand...
Click to collapse
Thanks this sounds like the best advice I have had yet. MANY THANKS SIR!
However at the moment I have problems getting ADB/fastboot to recognise the phone is connected (using command line). Just says waiting for device and nothing happens. Is this because I have clockworkmod installed? I just got a new PC and installed latest ADB/SDK and latest HTC sync software so everything should be latest. I cant do much if I cant give commands unfortunately. If I solve this I will post an update.

snorglamp said:
Thanks this sounds like the best advice I have had yet. MANY THANKS SIR!
However at the moment I have problems getting ADB/fastboot to recognise the phone is connected (using command line). Just says waiting for device and nothing happens. Is this because I have clockworkmod installed? I just got a new PC and installed latest ADB/SDK and latest HTC sync software so everything should be latest. I cant do much if I cant give commands unfortunately. If I solve this I will post an update.
Click to expand...
Click to collapse
Can be related to cwm! Look into my index thread, there is a link to cwm with working adb or use TWRP2.5.
Good luck.

?????????????*

ismailnayir said:
?????????????*
Click to expand...
Click to collapse
If's there anything you don't understand, ASK!
So nobody knows, what you want, sorry.

old.splatterhand said:
Can be related to cwm! Look into my index thread, there is a link to cwm with working adb or use TWRP2.5.
Good luck.
Click to expand...
Click to collapse
Yes I thought that might be the case but was not having any luck with search results to find out what to do. Thank the internet gods for you! Going to your thread now XD!

I had similar issue with an update, the reason is that the stock recovery has some commands that neither cwm nor twrp have.
Here's what I did to fix it and update succesfully:
- extracted recovery.img from the update itself
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
- after that I was able to update without problems
note that you need to flash back twrp or cwm if you want root.
Of course you need unlocked bootloader, android-sdk's platform tools and adb drivers to do this, but you should already have them if you flashed cwm
good luck!

madpausa said:
I had similar issue with an update, the reason is that the stock recovery has some commands that neither cwm nor twrp have.
Here's what I did to fix it and update succesfully:
- extracted recovery.img from the update itself
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
- after that I was able to update without problems
note that you need to flash back twrp or cwm if you want root.
Of course you need unlocked bootloader, android-sdk's platform tools and adb drivers to do this, but you should already have them if you flashed cwm
good luck!
Click to expand...
Click to collapse
DUDE! THATS TOTALLY WHAT I WANNA HEAR, however, ive been having enormous trouble getting fastbood/ADB to recognise the phone is attached, I have tried the universal clockwork mod ADB driver which didnt work, and I havent had any luck folloing the instructions on Splatterhand's other threads in getting it recognised. The command fastboot devices just leaves a flashing cursor FOREVER! Other commands leave the message "waiting for device". According to splatterhand ADB/Fastboot wont recognise the phone as attached because of clockworkmod and therefore I cant push any commands or files...how did you solve this?

OMG
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhand for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!

snorglamp said:
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhead for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!
Click to expand...
Click to collapse
Just a thought, if you're upgrading from ics to jb, I think you should use ics recovery (I guess you can grab it from another ruu)... anyway, glad to be of any help

madpausa said:
Just a thought, if you're upgrading from ics to jb, I think you should use ics recovery (I guess you can grab it from another ruu)... anyway, glad to be of any help
Click to expand...
Click to collapse
So I took your advice and pulled a recovery image from the ICS Cricket (using the link in splatterhand's thread to stock resources) image. Downloaded the OTA and went to apply it, got past boot/recovery screen checks and all was looking good until i got to a screen with what looked to be an SD card icon and a loading bar under a larger phone icon with a green recycle type circle over it. That loading bar stopped about half way with a red triangle and exclamation mark (i.e. during the update process). Fortunately not bricked. It may be that I need the original Vodafone AU recovery image, or that there was something about the ICS OTA image that I used that made it fail. Not sure. Will try to find another stock recovery image.

Applied recovery from EU RUU stock and while that went fine and can boot into htboot no problem, when applying the OTA update it skips the fastboot and gets stuck on HTC One screen like normal loading except stuck.
I think I will try old.splatterhand's recommendation now that I am able to push things to the phone through adb/fastboot, so thanks for your commandline tip but now I must try flashing the JB recovery etc as outlined in his post.
The problem may be that the OTA is expecting a vodafone australia stock recovery as i seem to be getting different outcomes depending on which stock recovery image I apply...
I have sent Old.Splatterhand the Vodafone Australia JB OTA file for the main thread collection in case anyone wants it or the images therein, but at the moment it is of little use to me hehe.

SUCCESS! How to update to Jelly Bean from modded/rooted HTC One SV ICS
Ok so I should probably post this somewhere else so old.splatterhand can just post the summary. But here is what happened and a combination of your advice helped me so super thanks to both of you (madpausa and old.splatterhand)!
So I was in a situation where having rooted my stock HTC One SV and flashed clockworkmod I couldnt apply the Jellybean update that was constantly in my notifications bar (referred to as OTA update). When I tried to reboot into recovery clockworkmod would take over instantly and I was unable to run commands from fastboot command lines.
I was however able to download the update which could be found in (internal memory) "Downloads" folder "OTA_K2_UL_JB...zip".
In order to apply the advice of madpausa I had to first revert to stock recovery image before applying the recovery image from the OTA. So I got a stock recovery image from the cricket version (see old.splatterhand's thread) and flashed that first.
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc (select HTC Sync) and fire up the CMD interface for command line time (cd Android)
- command 'adb reboot bootloader' which actually did boot the phone into Hboot and not clockworkmod, so that solved the ADB/fastboot issue for me
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Once I had reverted to stock recovery I was then able to apply the rest of madpausa and old.splatterhand's advice
What finally worked for me was copying that OTA JB update zip to pc my and unzipping it. Inside there was firmware.zip, which also needed to be unzipped and inside is the jelly bean version recovery.img.
- put it in the same directory as fastboot program (and remove the other recovery.img or overwrite)
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Then when I booted up my phone again it asked me if wanted to download and install the update, which I did. The phone rebooted, update applied, all good!
Hboot did not have to be re-locked, so dont go as far as locking your phone again.
Thanks to everyone's help for this one, I am now a happy use of Jellybean on my previously modded HTC One SV...now to get superuser back and stock that data leakage with LBE again!!!

Good to see you got your problem sorted out!:highfive:
And the download of OTA was succesful, thanks!:good:

snorglamp said:
Ok so I should probably post this somewhere else so old.splatterhand can just post the summary. But here is what happened and a combination of your advice helped me so super thanks to both of you (madpausa and old.splatterhand)!
So I was in a situation where having rooted my stock HTC One SV and flashed clockworkmod I couldnt apply the Jellybean update that was constantly in my notifications bar (referred to as OTA update). When I tried to reboot into recovery clockworkmod would take over instantly and I was unable to run commands from fastboot command lines.
I was however able to download the update which could be found in (internal memory) "Downloads" folder "OTA_K2_UL_JB...zip".
In order to apply the advice of madpausa I had to first revert to stock recovery image before applying the recovery image from the OTA. So I got a stock recovery image from the cricket version (see old.splatterhand's thread) and flashed that first.
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc (select HTC Sync) and fire up the CMD interface for command line time (cd Android)
- command 'adb reboot bootloader' which actually did boot the phone into Hboot and not clockworkmod, so that solved the ADB/fastboot issue for me
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Once I had reverted to stock recovery I was then able to apply the rest of madpausa and old.splatterhand's advice
What finally worked for me was copying that OTA JB update zip to pc my and unzipping it. Inside there was firmware.zip, which also needed to be unzipped and inside is the jelly bean version recovery.img.
- put it in the same directory as fastboot program (and remove the other recovery.img or overwrite)
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Then when I booted up my phone again it asked me if wanted to download and install the update, which I did. The phone rebooted, update applied, all good!
Hboot did not have to be re-locked, so dont go as far as locking your phone again.
Thanks to everyone's help for this one, I am now a happy use of Jellybean on my previously modded HTC One SV...now to get superuser back and stock that data leakage with LBE again!!!
Click to expand...
Click to collapse
This is the exact problem I had. I started trying to root my HTC One SV (Boost Mobile) a couple of months ago. I got past the HTC unlock bootloader, but I got confused by the rest of the rooting guide, so eventually I gave up on finishing the rooting process. Ever since then, it has said ***TAMPERED*** in hboot when I go in there. Well, just like you, I started getting the JB update notification in the OTA. I tried to install it like 15 times, but it always just rebooted into the existing image I had, which was the stock image.
So today I decided to try and finish the root and then find a JB ROM to install. old.splatterhand helped me out with getting it rooted, and it was a success. But when I asked him about JB ROMs, he said I had to have S-off. When we spoke a little more about it, he pointed me here, telling me that he helped you get the root back after you got through the OTA update.
So now, I guess I need to try and follow your instructions on getting the OTA update, and then go back to the thread where he helped you get the root back.
I'm a complete n00b to rooting android devices, but I'm pretty confident that I can do this with the proper guidance. I have rooted 2 Samsung SCH-i500s and today I finally got this HTC One SV rooted. I'm starting to see how it all works.
If you don't mind, let me know of any details of issues you faced that may not be in the guides you followed. That would be a great help.
Congrats on getting yours all done.
Thanks.
---------- Post added at 07:32 PM ---------- Previous post was at 07:15 PM ----------
snorglamp said:
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhand for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!
Click to expand...
Click to collapse
Do you type "adb reboot bootloader" in the command line? I wanna be clear on this before I make any moves.