Database Info

[Q] "No command." error while trying to access recovery?

I have unlocked the bootloader on my Moto G.
I have also flashed ClockworkMod Touch sucsessfully, but it did not boot after the first reboot, even when I said yes to "Disabling the stock recovery reflashing".
Now, whenever I enter fastboot mode (POWER + VOLDOWN) and select RECOVERY, it comes up with "No command." and a picture of an android lying down, with its front open, with warning symbol. (See attached)
I have tried reflashing the recovery using fastboot, but the same problem happens.
Any help?

Press volume up for 10 seconds and then just tap power button once and release both.

mokkami said:
Press volume up for 10 seconds and then just tap power button once and release both.
Click to expand...
Click to collapse
Nope, not working. Nothing coming on the screen.

TheParanoidPickaxe said:
Nope, not working. Nothing coming on the screen.
Click to expand...
Click to collapse
Get the same issue after flashing a recovery with fastboot...
how i fixed it :
Flashed another one (CWM swipe on the cm11 thread) through fastboot mode
once recovery flash is done, go in the recovery RIGHT NOW (volume down to scroll, volume up to select ; don't touch power button)
once in the recovery, flash supersu if it has to be done, then reboot
Worked for me

Left it overnight plugged into my laptop, now my phone isn't turning on.
So yay, I have bricked my first smartphone!

TheParanoidPickaxe said:
Left it overnight plugged into my laptop, now my phone isn't turning on.
So yay, I have bricked my first smartphone!
Click to expand...
Click to collapse
That said, it has been unbricked.
Whenever I flash a recovery, I still get "No command.", Phenom.
Thanks

That new step above is the thing to do: hold Vol Up for like 15 seconds and then just tap power. It should work, but kinda tricky to get the first times.

I got the same "No Command" screen when I flashed TWRP recovery. Then I went back to bootloader mode and flashed it again. This time I noticed a "Mismatched partition size" error (it's probably there before but I didn't pay attention). Then I flashed CWM recovery & got the same mismatched partition size error. Then I flash TWRP again & again got the mismatched partition size error. At that point I searched xda forum & found someone said it's OK. That error message just means the new recovery size is different from the old one. So I tried going to recovery (vol down then vol up) and magically it worked!

Get the normal CWM, then
fastboot erase recovery
fastboot flash recovery recovery.img
then right away enter in it, vol down to highlight it, vol up to select/enter.It should work

TheParanoidPickaxe said:
That said, it has been unbricked.
Whenever I flash a recovery, I still get "No command.", Phenom.
Thanks
Click to expand...
Click to collapse
If your flashing CWM, flash it then select recovery and press volume up, if it ask for something choose yes, if it still shows no command press UP + POWER button if nothing happens just keep pressing up + power until it boots into recovery.

rogeriorp said:
That new step above is the thing to do: hold Vol Up for like 15 seconds and then just tap power. It should work, but kinda tricky to get the first times.
Click to expand...
Click to collapse
What is this supposed to do? It gives me some commands but doesn't look like clockworkmod recovery. I think it is default android recovery but I thought cwm was supposed to replace that?
When I first flashed CWM and booted into recovery it worked fine. Then I chose 'Reboot Now' and selected 'Disable system recovery' and 'Enable root'. However now when I reboot into recovery CWM doesn't work and I can't tell if I have root.

nexus_87 said:
What is this supposed to do? It gives me some commands but doesn't look like clockworkmod recovery. I think it is default android recovery but I thought cwm was supposed to replace that?
When I first flashed CWM and booted into recovery it worked fine. Then I chose 'Reboot Now' and selected 'Disable system recovery' and 'Enable root'. However now when I reboot into recovery CWM doesn't work and I can't tell if I have root.
Click to expand...
Click to collapse
That's for the stock recovery indeed, try reflashing CWM.

liveroy said:
Get the normal CWM, then
fastboot erase recovery
fastboot flash recovery recovery.img
then right away enter in it, vol down to highlight it, vol up to select/enter.It should work
Click to expand...
Click to collapse
Tks a lot. You save me!

romanoqz said:
Tks a lot. You save me!
Click to expand...
Click to collapse
Hey there I ran in to the same issue as you... How did you "Erase recovery from fastboot"?

Thugness said:
Hey there I ran in to the same issue as you... How did you "Erase recovery from fastboot"?
Click to expand...
Click to collapse
Code:
fastboot erase recovery
to erase the stock recovery
then
Code:
fastboot flash recovery recoveryname.img
to flash a custom recovery, where recoveryname is the name of the file of your custom recovery
If it doesn't work try flashing twice

1506
remo0073 said:
Code:
fastboot erase recovery
to erase the stock recovery
then
Code:
fastboot flash recovery recoveryname.img
to flash a custom recovery, where recoveryname is the name of the file of your custom recovery
If it doesn't work try flashing twice
Click to expand...
Click to collapse
I'm assuming you mean to do this through CMD prompt? when I try to put that in it just says < waiting for device > and it sits there. (regarding to the fastboot erase recovery part)
Edit: Okay so It was saying waiting because I wasnt in fastboot mode... (Im an idoit but learning) so I beleive I got done with the fastboot erase part but now when Im trying fastboot flash my CWM (recovery-clockwork-6.0.4.7-falcon.img) its saying "Unknown Partition" and "Error: cannot determine image filename for"
---------- Post added at 03:21 PM ---------- Previous post was at 02:45 PM ----------
Okay after messing around with CMD and your previous instructions I got it! (I think) Im in CWM recovery and trying to install my Supersu from zip. which is already on my phone but when I pick choose zip from /sdcard it says "e: can't mount /sdcard" I', useing a moto g that does not have a external sd card

Thugness said:
I'm assuming you mean to do this through CMD prompt? when I try to put that in it just says < waiting for device > and it sits there. (regarding to the fastboot erase recovery part)
Edit: Okay so It was saying waiting because I wasnt in fastboot mode... (Im an idoit but learning) so I beleive I got done with the fastboot erase part but now when Im trying fastboot flash my CWM (recovery-clockwork-6.0.4.7-falcon.img) its saying "Unknown Partition" and "Error: cannot determine image filename for"
---------- Post added at 03:21 PM ---------- Previous post was at 02:45 PM ----------
Okay after messing around with CMD and your previous instructions I got it! (I think) Im in CWM recovery and trying to install my Supersu from zip. which is already on my phone but when I pick choose zip from /sdcard it says "e: can't mount /sdcard" I', useing a moto g that does not have a external sd card
Click to expand...
Click to collapse
If your phone is XT1032 try to install this TWRP instead of CWM using the same procedure (of course in fastboot mode)
Code:
fastboot erase recovery
fastboot flash recovery recoveryname.img
Replace your zip with this SuperSU zip and copy it in SD Card
Then
- go in recovery mode
- INSTALL
- select SuperSU zip
- swipe
I think it should work

serophia said:
If your flashing CWM, flash it then select recovery and press volume up, if it ask for something choose yes, if it still shows no command press UP + POWER button if nothing happens just keep pressing up + power until it boots into recovery.
Click to expand...
Click to collapse
Your solution it worked for me, thanks a lot

liveroy said:
Get the normal CWM, then
fastboot erase recovery
fastboot flash recovery recovery.img
then right away enter in it, vol down to highlight it, vol up to select/enter.It should work
Click to expand...
Click to collapse
Thanks, this worked!

same problem here. tried install twrp recovery in fastboot without unlock the bootloader. error.. no command in recovery.. cant do anything.. tried all flash recovery method.. anyone pls help
---------- Post added at 03:50 AM ---------- Previous post was at 03:09 AM ----------
mobifree said:
Thanks, this worked!
Click to expand...
Click to collapse
thanks worked for me.. after flash recovery suddenly go to recovery option in bootloader menu. dont reboot the phone.. thanks all

[Q] moto g stuck in bootloop.

Hello everyone i am new here..
my moto g stuck in bootloop
fastboot -recovery and facatory reset also not working..
how can i fix this ?
moto g single sim 8gb
4.4.2 kitkat version
please reply me soon... waiting....

What you did and why you got the boot loop?
Sent from my XT1032 using XDA Premium 4 mobile app

padhu1989 said:
What you did and why you got the boot loop?
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
may be after moto g update to kitkat version... i dont remember.....
last night my mobile switched off and morning i just put on charging... and bootloop starting......
my moto g is from UK tesco mobile. comes with jeally bean..
and i update OTA in india kitkat version...

I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....

jayrocky11 said:
I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....
Click to expand...
Click to collapse
same in here :crying:

jayrocky11 said:
I can't seem to get into the recovery menu!
When I boot into fastboot I can select ‘Recovery’.
so i have unlocked bootloader...
now...
It displays 'bootloader unlocked' warning, then screen goes blank for a few seconds.
Then 'bootloader unlocked warning' displays again and again.....
Click to expand...
Click to collapse
Are you sure you are using volume up button to select a choice.
Pressing power button just reboots, volume down navigates and volume up selects
I made that mistae quite a number of times!
---------- Post added at 10:22 PM ---------- Previous post was at 09:35 PM ----------
jayrocky11 said:
may be after moto g update to kitkat version... i dont remember.....
last night my mobile switched off and morning i just put on charging... and bootloop starting......
my moto g is from UK tesco mobile. comes with jeally bean..
and i update OTA in india kitkat version...
Click to expand...
Click to collapse
Did you try flashing your phone back to Stock from fastboot?
http://forum.xda-developers.com/showthread.php?t=2542219

deej_roamer said:
Are you sure you are using volume up button to select a choice.
Pressing power button just reboots, volume down navigates and volume up selects
I made that mistae quite a number of times!
---------- Post added at 10:22 PM ---------- Previous post was at 09:35 PM ----------
Did you try flashing your phone back to Stock from fastboot?
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
yes i am using volume up to select.. but not working any factory - recovery.. same bootloop comming again....
now i am goin to flash phone..... downloading stock.....

For you to be able to update the firmware (-> Android) there must not be root or a custom recovery on the phone. Remove both, flash again. Otherwise the updater throws an error and the phone will always reboot.

cyrus_ae said:
For you to be able to update the firmware (-> Android) there must not be root or a custom recovery on the phone. Remove both, flash again. Otherwise the updater throws an error and the phone will always reboot.
Click to expand...
Click to collapse
hmmmm..okk
thanks

[Q][D2303] How to root with unlocked bootloader?

Hi guys! Im on 4.4.4 with unlocked bootloader, the only way to root this device that i found on the internet is to use locked bootloader tutorials.
Is there any easy way to root unlocked bootloader D2303 on 4.4.4 18.3.1.C.1.15? I tried flashtool but when it installs towel root and i press make it rain! it says this device is not supported. Thanks in advance!

Here is one easiest way, but its over chinese app called KingRoot.
1. Download latest KingRoot.
2. Press Root button
3. Allow USB debug in Developer settings(Tap 10 times in Phone info on Build number to get Dev. settings)
4. Install Philz Recovery
5. Flash SuperSU V.249 BETA! Important!
6. Flash RICDefeat.zip
Same way is described here
http://forum.xda-developers.com/xperia-m2/general/how-to-permanently-root-xperia-m2-t3106534
But dont forget to flash SuperSU V2.49 BETA and RICDefeat & remove KingRoot apps.

Lothgar said:
Hi guys! Im on 4.4.4 with unlocked bootloader, the only way to root this device that i found on the internet is to use locked bootloader tutorials.
Is there any easy way to root unlocked bootloader D2303 on 4.4.4 18.3.1.C.1.15? I tried flashtool but when it installs towel root and i press make it rain! it says this device is not supported. Thanks in advance!
Click to expand...
Click to collapse
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Enycz11 said:
Here is one easiest way, but its over chinese app called KingRoot.
1. Download latest KingRoot.
2. Press Root button
3. Allow USB debug in Developer settings(Tap 10 times in Phone info on Build number to get Dev. settings)
4. Install Philz Recovery
5. Flash SuperSU V.249 BETA! Important!
6. Flash RICDefeat.zip
Same way is described here
http://forum.xda-developers.com/xperia-m2/general/how-to-permanently-root-xperia-m2-t3106534
But dont forget to flash SuperSU V.249 BETA and RICDefeat & remove KingRoot apps.
Click to expand...
Click to collapse
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...

linuxct said:
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...
Click to expand...
Click to collapse
Thanks! Trying right now!

linuxct said:
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...
Click to expand...
Click to collapse
Wait! How to flash recovery? Via flashtool by androxyde or emma?
EDIT: Tryed via fastboot the cm12 recovery, all what i got is grey screen with blue lines yey.

Lothgar said:
Wait! How to flash recovery? Via flashtool by androxyde or emma?
EDIT: Tryed via fastboot the cm12 recovery, all what i got is grey screen with blue lines yey.
Click to expand...
Click to collapse
But you have to do a fastboot flash recovery recovery.img . Did you do that ?

linuxct said:
But you have to do a fastboot flash recovery recovery.img . Did you do that ?
Click to expand...
Click to collapse
Yep.

Lothgar said:
Yep.
Click to expand...
Click to collapse
Then there's no reason to happen that. The lines appear when you boot it normally or when you try to enter recovery by keep holding the Vol- button?
In my D2303 is fine working...

linuxct said:
Then there's no reason to happen that. The lines appear when you boot it normally or when you try to enter recovery by keep holding the Vol- button?
In my D2303 is fine working...
Click to expand...
Click to collapse
The phone is off. I press the power button it vibrates, then for 5-6 second the screen is black. Then the lines shows up and no boot. Vol- pressed or not is the same.
EDIT: Reflashed now only if i try to enter recovery the lines shows up!

Lothgar said:
The phone is off. I press the power button it vibrates, then for 5-6 second the screen is black. Then the lines shows up and no boot. Vol- pressed or not is the same.
Click to expand...
Click to collapse
Go in fastboot mode and run fastboot erase recovery .
Again, I see no reason why this could be happening as this recovery runs in it's partition, isolated, so if you don't run it (Vol- button from the beggining) then it should not interfere with device boot up. Try flashing the latest kernel from the .15 ftf also.

linuxct said:
Go in fastboot mode and run fastboot erase recovery .
Again, I see no reason why this could be happening as this recovery runs in it's partition, isolated, so if you don't run it (Vol- button from the beggining) then it should not interfere with device boot up. Try flashing the latest kernel from the .15 ftf also.
Click to expand...
Click to collapse
I reflashed the recovery trough fastboot and now only if i try to boot recovery the blue lines shows up. I think that is a problem of the recovery.

Lothgar said:
I reflashed the recovery trough fastboot and now only if i try to boot recovery the blue lines shows up. I think that is a problem of the recovery.
Click to expand...
Click to collapse
Maybe is a screen driver problem, but on a D2303?? For me it's working

linuxct said:
Maybe is a screen driver problem, but on a D2303?? For me it's working
Click to expand...
Click to collapse
I remember that you gave me and alternative recovery for the locked bootloader becouse the standard doesn't working. Maybe the same issue?

Lothgar said:
I remember that you gave me and alternative recovery for the locked bootloader becouse the standard doesn't working. Maybe the same issue?
Click to expand...
Click to collapse
No, it shouldn't as the problem only was the GPIO Keys... Not screen driver problem... But yes, looks like you can't use the CM Recovery.
Format your fastboot partition with fastboot erase recovery and use the locked bootloader procedure... What a pity.

linuxct said:
No, it shouldn't as the problem only was the GPIO Keys... Not screen driver problem... But yes, looks like you can't use the CM Recovery.
Format your fastboot partition with fastboot erase recovery and use the locked bootloader procedure... What a pity.
Click to expand...
Click to collapse
I'll try but i dont know how to get the root because the procedure of downgrading the kernel doesn't work i tryed several times!
Here what i got:

Lothgar said:
I'll try but i dont know how to get the root because the procedure of downgrading the kernel doesn't work i tryed several times!
Here what i got:
Click to expand...
Click to collapse
But that pic is from CM recovery or from kernel downgrade?
And in what step you get stuck in the kernel downgrade root method?...

linuxct said:
But that pic is from CM recovery or from kernel downgrade?
And in what step you get stuck in the kernel downgrade root method?...
Click to expand...
Click to collapse
CM recovery. If i downgrade the kernel the adb doesn't start! And yes is enabled in the settings.
EDIT: Solved trying now for the locked bootloader method!

Installed philz recovery with locked bootloader method but i cant flash omnirom! (status 7)

Twrp red exclamation

Tried installing​ twrp but everytime I reboot the red exclamation keeps popping if I choose recover as I fail to install the latest twrp. Any fix? Thank you. Currently on stock MM and not rooted.

Try it in this order:
1. fastboot flash recovery twrpfilename.img
2. fastboot boot twrpfilename.img

berbat0v said:
Try it in this order:
1. fastboot flash recovery twrpfilename.img
2. fastboot boot twrpfilename.img
Click to expand...
Click to collapse
Still the same. Already tried that on latest twrp.

Can you take a photo of it and post here?

aciupapa said:
Can you take a photo of it and post here?
Click to expand...
Click to collapse
I'll post it tomorrow. Still wonder why can't i install the recovery. Can't wait to flash nougat ROMS right now. Nexus is so complicated compared to my previous LG G2.

Every time I reboot to system I still can't go to recovery as the exclamation persists when I press recovery on fastboot mode. What could be missing?

Hiyaslalabs said:
Every time I reboot to system I still can't go to recovery as the exclamation persists when I press recovery on fastboot mode. What could be missing?
Click to expand...
Click to collapse
On the exclamation screen if you press and hold the power button and then press the volume up button you will go into stock recovery. If you want TWRP, I say restart from scratch. Its never failed me. Update to the latest bootloader by flashing the latest factory image(M4B30Z) with instructions found here: https://developers.google.com/android/images#hammerhead
Keep the bootloader unlocked then flash the latest twrp and see the result.

Device is already in latest stock marshmallow. Still the same.

berbat0v said:
Try it in this order:
1. fastboot flash recovery twrpfilename.img
2. fastboot boot twrpfilename.img
Click to expand...
Click to collapse
This helped me, thanks very much.
Rebooting with adb reboot recovery or fastboot reboot-recovery did not work and resulted in the red exclamation mark android.
Android version for my bullhead device is Oreo
Edit: The red exclamation is just stock recovery btw. You can still enter recovery mode with Power Button + Tap Volume Up.

ROOT NOKIA 3 TA-1032 Android 8.0

Hi !
I tried to root my Nokia 3 TA-1032 with Android Oreo following the instructions on supersu.com/gettingstarted#recovery
My problem is that I can't access to recovery mode and don't know how to activate it. How can i access it ? Or have you an another simplest way to root it ?
Thanks

>Taps< said:
Hi !
I tried to root my Nokia 3 TA-1032 with Android Oreo following the instructions on supersu.com/gettingstarted#recovery
My problem is that I can't access to recovery mode and don't know how to activate it. How can i access it ? Or have you an another simplest way to root it ?
Thanks
Click to expand...
Click to collapse
What about adb reboot recovery?

redweaver said:
What about adb reboot recovery?
Click to expand...
Click to collapse
Hi !
I will try adb and reply after it.

anybuddy please help me my Nokia 3 android 8.0 I am trying to unlock bootloader in fastboot mode but fastboot command window always give me error wrong command I tried almost commands like fastboot oem unlock, I 2x0b4ed oem unlock, fastboot oem unlock codekey etcs but always keep getting massage wrong command I already enabled usb debugging and unlock oem in developers option I have ta1032 model.

redweaver said:
What about adb reboot recovery?
Click to expand...
Click to collapse
Ok, so, adb reboot recovery don't work, it just normaly reboot the phone.
How can i fix it ?

>Taps< said:
Ok, so, adb reboot recovery don't work, it just normaly reboot the phone.
How can i fix it ?
Click to expand...
Click to collapse
I hope you didn't unplug your phone from your PC when rebooting. Phone has to be plugged in to enter recovery

I hadn't unplug my phone during the reboot

>Taps< said:
I hadn't unplug my phone during the reboot
Click to expand...
Click to collapse
or you can use usual method:
connect phone to charger/PC and turn off your phone. Hold power + vol up button and counting will begin. When counting ends, hold for 2 sec more and it should boot to recovery.

SkaboXD said:
or you can use usual method:
connect phone to charger/PC and turn off your phone. Hold power + vol up button and counting will begin. When counting ends, hold for 2 sec more and it should boot to recovery.
Click to expand...
Click to collapse
Yes but it doesn't work I have the error "No command" I tried also power +vol - but it's just the fastboot mode.

>Taps< said:
Yes but it doesn't work I have the error "No command" I tried also power +vol - but it's just the fastboot mode.
Click to expand...
Click to collapse
When you get to the no command screen you have to press power + volume up. There's a trick to it, I don't get it all the time either.

redweaver said:
When you get to the no command screen you have to press power + volume up. There's a trick to it, I don't get it all the time either.
Click to expand...
Click to collapse
I just tried and it worked I arrived in the recovery mode but I did not find " install" ?

>Taps< said:
I just tried and it worked I arrived in the recovery mode but I did not find " install" ?
Click to expand...
Click to collapse
What exactly are you trying to install?
One other thing, if you want to root your phone on Oreo, this is the way to go:
https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768

redweaver said:
What exactly are you trying to install?
One other thing, if you want to root your phone on Oreo, this is the way to go:
https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
Click to expand...
Click to collapse
Ok I will try it and reply after

>Taps< said:
Yes but it doesn't work I have the error "No command" I tried also power +vol - but it's just the fastboot mode.
Click to expand...
Click to collapse
I too got same no command on my phone too, try this it will work 99% press power and volume+ same time then Nokia logo flash just release power button only not volume+ you will enter on no command screen then now the trick is to press both button at same time volume+ and power for 2-3 sec release buttons again press both buttons and release do this simultaneously you will get into recovery mode.

redweaver said:
What exactly are you trying to install?
One other thing, if you want to root your phone on Oreo, this is the way to go:
https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
Click to expand...
Click to collapse
Ok,I tried the flash way and tried the two different steps :
For the one - Step 2,
*I'm blocked, I don't know when start the phone, click on download... and sometimes i have an error about the authentication file
For the two -Step 2
*Magisk Manager don't want to download zip and create patched boot image. Nothing happens
I really don't know.

>Taps< said:
Ok,I tried the flash way and tried the two different steps :
For the one - Step 2,
*I'm blocked, I don't know when start the phone, click on download... and sometimes i have an error about the authentication file
For the two -Step 2
*Magisk Manager don't want to download zip and create patched boot image. Nothing happens
I really don't know.
Click to expand...
Click to collapse
This is how I do mine, click on download, then if the phone is on, shut it down. It doesn't always work but sometimes it does. You have to finish that step before the next.
What version of spflashtool did you download?

redweaver said:
What version of spflashtool did you download?
Click to expand...
Click to collapse
I use the version 5.1804.
redweaver said:
This is how I do mine, click on download, then if the phone is on, shut it down. It doesn't always work but sometimes it does. You have to finish that step before the next.
Click to expand...
Click to collapse
What's next ?

>Taps< said:
I use the version 5.1804.
What's next ?
Click to expand...
Click to collapse
Did the progress bar change? If not try unplugging your phone then plugging it back. If that doesn't work, start the phone again and shutdown
By the way what did you try to flash?

I didn't see any bar progress ??*
I want to flash TWRP to install magisk or supersu

>Taps< said:
I didn't see any bar progress ??*
I want to flash TWRP to install magisk or supersu
Click to expand...
Click to collapse
So the download button is still greyed out? Start phone and try again