Database Info

The complete solution to repair dead boot and unbrick and update LG P920 O3D

The complete solution to repair dead boot and unbrick and update & root LG P920 O3D to Android 4.0.4 without any problems with the official Rom ICS{ all fix}full 3D and camera work perfect all the most languages support.
Before anything make sure that all LG Drivers and everything Installed and run under Windows 7 ultimate and disable user account control settings don't run under Windows 8
LG Drivers https://docs.google.com/file/d/0Bwirw62bfRfebUNQNjJzUHlNbHM/edit?usp=sharing
First, download the following files:
1- flash fastboot and Replace the original boot and download mode http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
or
https://drive.google.com/file/d/0Bwirw62bfRfeY2hsY3JRTDIybTQ/edit?usp=sharing
2- download Rom https://drive.google.com/file/d/0Bwirw62bfRfeM0dXbUVpcmNUOEU/edit?usp=sharing
3- download SmartFlashTool-3D to flash rom by fls and bin file https://docs.google.com/file/d/0Bwirw62bfRfeY0hKNjlqZFRSdUU/edit?usp=sharing
Second
Instructions:
After downloading the files previous
1- flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}View attachment 2067365
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
when is waiting for omap44 connect usb cable to your phone he start .
then insert battery to your phone when is waiting5 Seconds and follow the instructions on screen after this you see logo LG Gray
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in phone and He asks you entered fastboot Answer no and accept to flash and Replace the x-loader and u-boot source then inter to download mood and flash .
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot .
Another method to flash fastboot {Flash Wkpark boot loader +cwm normal recovery } use this tool and and follow the instructions on the screen https://docs.google.com/file/d/0Bwirw62bfRfeUWw0QU5jRVV4UlU/edit?usp=sharing
A Small Guide if Anyone has troubles installing Omap4430 Driver in Windows 7
arsen4oo said:
When plugging the phone in,find OMAP4430 in "Other Devices" in Device Manager.
Right click on OMAP4430,then click "Update Driver Software..."
Then browse to your omap4boot 1.8 folder that you have extracted from zip
Choose the usb_drv_windows folder and click OK
While installing the driver,ignore any warning messages
After installation finished you will be able to ressurect your phone
Good Luck!
Click to expand...
Click to collapse
2-flash Rom:
Connect phone usb with pc and Enter in download modeView attachment 2067367
Enter in download mode : Pull out battery then Hold Vol+ then connect usb cable to your phone then insert battery to your phone with Hold Vol+ .
run SmartFlashTool-3D and select mode Rom copy D/L and in destination binary file select CP.fls file in CP bin and select AP.bin file in AP bin from extract rom folder Then press Start .
After flash rom If the screen appears encryption unsuccessful
Make hard reset for phone by turn off phone then press hold down volume and power button and Make hard reset for phone.then restart phone.
Root:
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
1. Download This Drives and Install Them Both
2. Download This Root and Than Extract The Zip and Install The Root Program
3-A. In Your Phone Go To Settings -- Security And Enable Unknown sources
3-B. In Your Phone Go To Settings -- Developer options And Enable USB debugging
4. Connect your Phone To PC using Cable and Than Open The Root Program and Wait until u see your Device Name.
5. Your Phone Well Auto Reboot after Complete
6. Done
Install CWM & TRWP recovery mood :
install this as normal application and run after root your phone
https://docs.google.com/file/d/0Bwirw62bfRfeb2JPbEhKTXQ2OEE/edit?usp=sharing
FM Radio:
https://docs.google.com/file/d/0Bwirw62bfRfeX1BMWGFvMDVzSEk/edit?usp=sharing
extract then put FM Radio for ics 4.0.4 Lgp920.zip in external sd card then flash it by inter cwm mood recovery then choose install from sdcard then choose zip from sdcard then choose FM Radio for ics 4.0.4 Lgp920.zip
that's all after root phone and install cwm mood recovery.
Thank you for all
have a nice time

Where is the difference of this one:
http://forum.xda-developers.com/showthread.php?t=2246001
Sent from my LG-P920 using xda app-developers app

Difference in that it is easier with ROM no one touched and stable
p-vlad said:
Where is the difference of this one:
http://forum.xda-developers.com/showthread.php?t=2246001
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest

GrMo Hady said:
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest
Click to expand...
Click to collapse
This slight difference doesn't make it worthy a new thread.
This is called copying, it's 99% the same.
+ It's not clear and organized for an "easy" tutorial.

GrMo Hady said:
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest
Click to expand...
Click to collapse
Well... As I said already to Karim Kahale before. SmartFlash make more problems than good stuff. I know that LGFlashTools is a bit more complicated but it do much better and clean job. Take a look here. Your threat is the same like Karim Kahale one just with another bin file. You have not opportunity to use large partition, the rom is not Rooted, 90% of the cases you end up with lost IMEI... so you end up with much more work to do.

this topic for a realistic experience
p-vlad said:
Well... As I said already to Karim Kahale before. SmartFlash make more problems than good stuff. I know that LGFlashTools is a bit more complicated but it do much better and clean job. Take a look here. Your threat is the same like Karim Kahale one just with another bin file. You have not opportunity to use large partition, the rom is not Rooted, 90% of the cases you end up with lost IMEI... so you end up with much more work to do.
Click to expand...
Click to collapse
Karim Kahale said:
This slight difference doesn't make it worthy a new thread.
This is called copying, it's 99% the same.
+ It's not clear and organized for an "easy" tutorial.
Click to expand...
Click to collapse
this topic for a realistic experience My Phone works very well and I m not lost my IMEI Tested frequently and successfully.
I do not care if he was in another similarity with the theme is normal to use the same tools
Of course these official rom not touched one of which is for anyone who wants to update and repair only.
All I want that permeated the interest of all
Thank you generally

thanks for this guide it helped me when Lg flash tool diden't work

+1 , I flashed twice with LG Support Tool, but this method is working and my SU760 is alive again.
Thank's!

thanks
sioxz said:
thanks for this guide it helped me when Lg flash tool diden't work
Click to expand...
Click to collapse
thanks

jorrddan said:
+1 , I flashed twice with LG Support Tool, but this method is working and my SU760 is alive again.
Thank's!
Click to expand...
Click to collapse
Thanks)

GrMo Hady said:
Thanks)
Click to expand...
Click to collapse

thanks this saved my day

[Guide] LG G Flex 2 Stock Firmware (Go Back to Stock) KDZ & TOT Method

2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T (stock rooted TOT) , T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
At the moment you cannot downgrade the Sprint G Flex 2 if your latest/updated, But thankfully there is NOW ZV8 to restore
http://oceanhost.eu/hsjpdmctwfd4/LGLS996-ZV8-tot.7z.html
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Firmwares Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem It may be LG Serial Port, Depends on current firmware.
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
​
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)​
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download (You`ll place this in the flashtool folder (Step 7)
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2!
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Click to expand...
Click to collapse
[/CENTER]
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs,Coffee, Lunch, if you feel my work has helped you Thank you!

Reserved!

Can you flash Lollipop 5.1.1 (for example from this link) to LG G Flex 2 with this method?

Heads up for rooted
If your device is rooted select the BOARD DL option, if not your device will go to a blue screen with LG Factory Reset Status 2, well at least that what it happened to mine, had a mini heart attack. Thanks for the guide!

I followed the procedure to bring my ls996 to stock with the zv5.tot but it is bootlooping at the minios screen.
Edit: I managed to enter recovery, I performed a factory reset but the phone still bootloops at the minios screen (doesn't even load minios). Does anyone have any idea on what to do next?

desudecchi said:
I followed the procedure to bring my ls996 to stock with the zv5.tot but it is bootlooping at the minios screen.
Edit: I managed to enter recovery, I performed a factory reset but the phone still bootloops at the minios screen (doesn't even load minios). Does anyone have any idea on what to do next?
Click to expand...
Click to collapse
you should follow this procedure to avoid minios
Http://forum.xda-developers.com/g-flex2/help/ls996-tot-t3094660/page5

muzammil457 said:
you should follow this procedure to avoid minios
Http://forum.xda-developers.com/g-flex2/help/ls996-tot-t3094660/page5
Click to expand...
Click to collapse
I followed everything that post #43 said but it still doesn't load minios. It reboots, shows it is loading minios and stays there for a few minutes then reboots again and does the same thing until it discharges. A minios bootloop as it doesn't let me do anything.
It stays at this screen:

Is this for the G Flex or the G3??
And it looks like its only sprint version.

desudecchi said:
I followed everything that post #43 said but it still doesn't load minios. It reboots, shows it is loading minios and stays there for a few minutes then reboots again and does the same thing until it discharges. A minios bootloop as it doesn't let me do anything.
It stays at this screen:
Click to expand...
Click to collapse
I'm having the same issue. It attempts to load into mini os and just sits on loading screen then power cycles. I tried escalating with a different pc and cable with the same result. Any ideaz
Sent from my LGLS991 using XDA Free mobile app

stickshift88 said:
I'm having the same issue. It attempts to load into mini os and just sits on loading screen then power cycles. I tried escalating with a different pc and cable with the same result. Any ideaz
Sent from my LGLS991 using XDA Free mobile app
Click to expand...
Click to collapse
I have used the lgflashtool on different lg devices besides the Flex 2 and this has never happened before. So I don't know what is happening with this phone.

Zip files?
Sevillesv said:
If your device is rooted select the BOARD DL option, if not your device will go to a blue screen with LG Factory Reset Status 2, well at least that what it happened to mine, had a mini heart attack. Thanks for the guide!
Click to expand...
Click to collapse
Will this work with a zip file?

AsianWakaFlocka said:
Will this work with a zip file?
Click to expand...
Click to collapse
No, you need to follow this steps: http://forum.xda-developers.com/g-flex2/general/sprint-ls996-5-1-1-ota-update-zip-t3132917

AT&T ?
Have the H950. You show AT&t Lg g flex 2. Do you have the KDZ files please ??

HI i need lg g flex 2 f510s/k..... Firmware (kdz file)please.

This method does not work with kdz files. There are no model dll files for kdz, and this software only works with tot and a dll file. I tried the method that was on the storage account you provided, that was for kdz files, but that too does not work with my H955. I have the firmware file for my device, but no kdz method available works for my device.
I don't know why you would load a tutorial and say it is for kdz and tot files, but it is only for tot files... Not judging, just wondering.
Any idea on a viable method for flashing kdz files?

Thanks broski

Restarts on MiniOS screen my sprint g flex 2.....help!!!
i have flashed my g flex 2 sprint modeil with the files in the storage cow mentioned but the device is stuck on minios display and then restarts again and again.
Please help me as download mode flashes for 10 seconds only..

gomhtog said:
This method does not work with kdz files. There are no model dll files for kdz, and this software only works with tot and a dll file. I tried the method that was on the storage account you provided, that was for kdz files, but that too does not work with my H955. I have the firmware file for my device, but no kdz method available works for my device.
I don't know why you would load a tutorial and say it is for kdz and tot files, but it is only for tot files... Not judging, just wondering.
Any idea on a viable method for flashing kdz files?
Click to expand...
Click to collapse
You are correct. This only for TOT method. If you have KDZ file then you should use LG Flash Tools.

Rully Hidayat said:
You are correct. This only for TOT method. If you have KDZ file then you should use LG Flash Tools.
Click to expand...
Click to collapse
LG Flash Tools do not work, unfortunately. I have tried it about a hundred times, with different configurations, with different methods that are available on here, and on two different computers, but it always stops at 9% and tells me that there is no connection to the server and to retry.

gomhtog said:
LG Flash Tools do not work, unfortunately. I have tried it about a hundred times, with different configurations, with different methods that are available on here, and on two different computers, but it always stops at 9% and tells me that there is no connection to the server and to retry.
Click to expand...
Click to collapse
That is the problem, you should flash the KDZ without internet connection.

[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method

Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient​
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
​
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)​
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2!
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Click to expand...
Click to collapse
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped you Thank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd​

Thread now opened!

hyelton said:
Thread now opened!
Click to expand...
Click to collapse
You mean you found the firmware files for the H901?

NYLimited said:
You mean you found the firmware files for the H901?
Click to expand...
Click to collapse
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk

hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi,
I bought my V10 at expansys australia, and the version is H961N Dual Sim,
but the software version is v10b-SEA-XX instead of v10b-HKG_XX, I believe it is a singapore version.
Any one has the v10b-SEA-XX kdz file?
or
Is that compatible to flash v10c-HKG-XX on my Singapore version of V10???

These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064

[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
burnsky05 said:
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
All my kdz files come from LGs site that are on all my guides. I also have KDZs that are no longer available as well for other models.
Sent from my iPhone using Tapatalk

Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787

burnsky05 said:
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
Click to expand...
Click to collapse
Thanks, I've been keeping watching and uploading as I get them !

hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't understand.. This thread is, according to the title, for LG v10...

NYLimited said:
I don't understand.. This thread is, according to the title, for LG v10...
Click to expand...
Click to collapse
Yes, Remember there are close to 10 different models for the V10. There are more than just the T-Mobile H901 V10

Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk

mwebb34 said:
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Go to this thread
http://forum.xda-developers.com/showthread.php?t=3244237

Thanks
Sent from my VS990 using Tapatalk

Is it possible to install a different kdz on an identical spec phone?
I have h960a, can I install the new Turkish mm 6.0 kdz?

Keep in mind that Tr version is 64gb.

Is there kdz for H960A 32gb ?

Is this confirmed working for the VS990?

hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot

[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
nocomp said:
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
Click to expand...
Click to collapse
Did you drag that window over?? That's normal. That message is supposed to come up.. In most cases when you drag it over you'll see it's actually flashing. It says that because there's not as it's not needed. But you should be using LGUP not the older flash tool
Sent from my iPhone using Tapatalk

[HOW TO] Recover from any hardbrick or red case in 9008 mode without ANY BOXEs

Well guys, its finally here!! You can finally unbrick your device without any jtag,medusa, octopus box!!
DISCLAIMER: IM NOT RESPONSIBLE IF THIS DOES SOMETHING BAD TO YOUR DEVICE WHICH IT SHOULDNT.
WARNING: THIS WILL DELETE EVERYTHING IN THE INTERNAL STORAGE OF THE DEVICE!!
FAQ"
1.,)My phone blinks red and i cant boot into 9008 mode at all. What can i do?
A. From what ive expreniced, you need to take out the back and touch two test points on the g7 while connected to the pc with a tweezer.
from another thread :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2,) I keep getting shara failed, the firehose is in the right folder and the xml files as well. Everything is in the same folder.
A. There are two reasons why it may fail.
1 Make sure you install the drivers correctly.!! Windows 10 has driver signature enforcment enabled on default so you need to disable that and install the 9008 drivers. To check if your drivers are installed correctly open up Device manager via searching it in the windows bar then go into ports and make sure theres no question mark or an yellow exclamation (!) sign next to it. If there is you have you disable signature enforcement and install the drivers manually. To do that you can google it cause theres a bunch of ways to do it.
2. if the drivers are installed correctly then you should try two things. One run it as admin and check if you can open up parition manager or load the files. and two is to reboot into edl mode by holding down Vol - and then power then once it turns off and on again at the lg logo, hold it down and reboot into edl mode again.
3.Red case:
You may have the red case cause you locked your bootloader by accident or you never unlocked it or something happened. Just use this guide to flash the abl file https://forum.xda-developers.com/lg-g7-thinq/how-to/how-to-partitions-flash-abl-t-mo-t4051249 then do fastboot oem unlock then flash back the abl for your android verison.
Requirments:
-A computer of course
-USB cable to connect your phone to the pc
-This oreo firmware https://lg-firmwares.com/downloads-file/17341/G710ULM11g_01_NAO_US_OP_1112.kdz
-The unbrick files from here: https://drive.google.com/open?id=1gozwGTc8BT1w_gb230GUT4RP_Mwe5fz4
-KDZ Tools: https://github.com/ANEP-ET/kdztools/archive/master.zip
-Python installed :https://www.python.org/downloads/
Steps:
AA. You can download this, extract them and skip steps 1, and 5-9
https://drive.google.com/file/d/19JBomkFdFglUqFhF3jFsJ-H2WJN4Dwp0/view?usp=sharing Thanks to @avilav
BB. You can do it your self too ill leave them in the steps
1. Download and install python
PYTHON INSTALL STEPS:
a. Download and install python 2.7
b.Download and install C++ Compiler for python2.7: https://www.microsoft.com/en-us/download/details.aspx?id=44266
c. Download and install thus redistruble
https://www.microsoft.com/en-us/download/details.aspx?id=48145
D. After everything is done installing open C:/Python2.7/Scripts folder and right click and open powershell
E. Type CMD then enter and then put
Code:
pip install zstandard
F. After thats done continue with the next steps. And you can close that window
2, Download all the files above and extract them into one folder. Make sure to extract everything INSIDE the kdztools folder.
3. Run the qpst file you extracted and install it
4. A.If your phone is already in 9008 mode and stuck there make sure to hold down and power for at least 10-20 seconds while connected to your pc and should reboot back to it.
B. If it doesnt boot into download mode or android at all but theres a picture or bootlooping or at fastboot mode etc... or at the white lg logo: https://www.youtube.com/watch?v=__MY0qB1G8c use this tutorial to boot into 9008 mode. Plug your device into the computer, then hold power then down the turn it off and then quicky let go of power and press and hold power then rapidly press the vol+ button and you should be at a black screen and should be in 9008 mode. To check: Open up device manager and check ports and should say qualcomm 9008 mode. If it says something like qhubulk usb an theres an exclamation on it make sure to right click update drivers and search automatically on the internet. Otherwise youre gonna have to find the drivers your self online which isnt hard.
5. Once you confirm that you are there right click in the folder where you extracted everything open up Powershell or if you have it to set to command prompt open that.
6. In powershell type cmd and press enter.
7. Type:
Code:
unkdz.py -f G710ULM11g_01_NAO_US_OP_1112.kdz -x
then press enter
8. Wait a while and ignore the warning about offsets and stuff like that and dont close it yet.
9. After its done open up the kdz extracted folder and move the .dz file it generated back into where you extracted everything and then run this command in that same command prompt:
Code:
undz.py -f G71011g_01.dz -c
10. Wait while this also finishes, again ignore the warnings.
11. Place the rawprogramfiles0-6.xml's into the dzextracted folder it created this time
12. Now its time to flash, so open up qfil, you can just search it in the search bar on windows 10.
13. In the qfil window, select click configuration on top then firehouse configuration then make sure you change device type to UFS then click ok
14. Select Flat Build then in the programmer path select the prog_ufs_firehose_Sdm845_lge.elf file.
15. In the search path put the location of the dzextracted where all the files are extracted should be where theres a bunch of different bins
16. In the Rawprogram and Patch place click load xml then navigate to where the rawprogramfiles are (should be where dzextracted ) if you dont see it. If you do see it then shift then click Rawprogramfile0 then Rawprogramfile6 and it should select all of them. Then it should say select patch file. just click cancel on the patch file.
17. Click download and it should start flashing the files and wait till it done.
18 Hold power and down for 10-20s it should reboot and it should be able to boot android. It may restart once so it erases user data.
19. You should be able to boot into android now
If it doesnt boot:
You should be able to enter download mode now to flash fw with lgup
Lets Thank:
@Xsavi For finding the firehose file for sdm devices
@quickwshell for the rawprogram generator.

THANK YOU!!!!!!!!!!!!!!
Thank you thank you it worked with my lg g7 g710n

Hi there,
is there a way to recover my lost s/n number with that?
And many thanks for your work!

bongster said:
Hi there,
is there a way to recover my lost s/n number with that?
And many thanks for your work!
Click to expand...
Click to collapse
I can restore you S / N

motogvasyag said:
I can restore you S / N
Click to expand...
Click to collapse
Hi,
and how do you do that?

heres another link for the kdz if the lge link is slow
https://androidfilehost.com/?fid=4349826312261728482

Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?

Smouk said:
Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?
Click to expand...
Click to collapse
The python windiw where you opened the script folder

Smouk said:
Where to enter "D. after the installation is complete, go back to another cmd window and type: pip install zstandard"? In adb, python?
Click to expand...
Click to collapse
It'z easier to use Cygwin. Download it and install. Open Cygwin
After the $ type pip install zstandard as zstd press enter it will find the .whl file it needs to run in python to extract any dz file your having problems with or other files you need for python.

Hi, @Awesomeslayerg, would your method wipe efs along with s/n or imei?

zacox123 said:
Hi, @Awesomeslayerg, would your method wipe efs along with s/n or imei?
Click to expand...
Click to collapse
Possibly, depends how you bricked it.

can anyone provide the extracted *11g kdz* files in a link. i managed to run evrything exept to extract the *G71011g_01.dz* in python. its says that the zstandard tool not found, and dosnt extract with LG_Firmware_Extract_v1.2.6.1 eather , idont know why.
or help me with the *prog_ufs_firehose_Sdm845_lge* and *rawprograms* for the *G710ULM21d_00_NAO_US_OP_0711.kdz* firmware to flash pie
thnks for your help frnds plz help me

ghani mal said:
can anyone provide the extracted *11g kdz* files in a link. i managed to run evrything exept to extract the *G71011g_01.dz* in python. its says that the zstandard tool not found, and dosnt extract with LG_Firmware_Extract_v1.2.6.1 eather , idont know why.
or help me with the *prog_ufs_firehose_Sdm845_lge* and *rawprograms* for the *G710ULM21d_00_NAO_US_OP_0711.kdz* firmware to flash pie
thnks for your help frnds plz help me
Click to expand...
Click to collapse
Cross flash to the G710ULM21d_00_NAO_US_OP_0711.kdz and use qfil to backup what you need. (Boot_a.img, Boot_b.img).
Here's a good guide to help you. It's from the of LG v40 forum but you can use it for your device.
https://forum.xda-developers.com/lg-v40/development/unlock-lg-v40-via-9008-root-t-mobile-t4042207
Remember all this is at your own risk!!! Good luck.
All the files you need are in the thread.

netookska05 said:
Cross flash to the G710ULM21d_00_NAO_US_OP_0711.kdz and use qfil to backup what you need. (Boot_a.img, Boot_b.img).
Here's a good guide to help you. It's from the of LG v40 forum but you can use it for your device.
https://forum.xda-developers.com/lg-v40/development/unlock-lg-v40-via-9008-root-t-mobile-t4042207
Remember all this is at your own risk!!! Good luck.
All the files you need are in the thread.
Click to expand...
Click to collapse
i want to flash 11g oreo rom and i need somone to provide 11g firmware extracted files; to flash it. i get erour when i flash the 21d firmare cause of *size does not match*, so if you can just provide a link to the 11g firmware extracted files in *androidfilehost* or *mega* i will be greatfull
thank you

ghani mal said:
i want to flash 11g oreo rom and i need somone to provide 11g firmware extracted files; to flash it. i get erour when i flash the 21d firmare cause of *size does not match*, so if you can just provide a link to the 11g firmware extracted files in *androidfilehost* or *mega* i will be greatfull
thank you
Click to expand...
Click to collapse
How are you flashing the 21d kdz?

netookska05 said:
How are you flashing the 21d kdz?
Click to expand...
Click to collapse
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.

ghani mal said:
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.
Click to expand...
Click to collapse
So your device is bricked? I can share the kdz and dz files. Let me get things together and I will provide a link.

ghani mal said:
I extracted it with lg kdz extractor and try to flash it with the files that's found on top of this thread (rawfiles and everything else) exept the extracted files i changed theme to the 21d firmware.
Click to expand...
Click to collapse
You cant use the 21d with the rawprogran files. These are only for that oreo kdz. You can flash them back to pie later.

Awesomeslayerg said:
You cant use the 21d with the rawprogran files. These are only for that oreo kdz. You can flash them back to pie later.
Click to expand...
Click to collapse
This is why i need oreo files, to flash them but i couldn't extract this firmware 11g , if you did extract it could you upload them for me, and thank you for your help.

netookska05 said:
So your device is bricked? I can share the kdz and dz files. Let me get things together and I will provide a link.
Click to expand...
Click to collapse
Thanks man for your help, i am waiting....

How To Guide UNBRICK GUIDE FOR ONEPLUS 9 EU(LE2113) ONLY

So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.

Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped

I'm trying my best but my internet isn't really doing a great job at uploading them at fast enough pace.

[email protected] said:
Please add the files soon buddy, i have a bricked oneplus 9 indian variant and i tried all the methods in the forum but none helped
Click to expand...
Click to collapse
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing

To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.

EtherealRemnant said:
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too.
Click to expand...
Click to collapse
Thank you for this I shall add this at the top of the instructions

alihaider9083 said:
These files are only for the EU model (LE2113) but there's already indian varient's stock available on XDA that work.
OnePlus 9 Oxygen OS India MsmDownloadTool
Oxygen OS 11.2.4.4.LE25DA Repack ZIP by MlgmXyysd Size: 3.57GB (3833362493) MD5: a8840b5bad0ef53922db084c6fac3304 Download: TeraBox (Password: cn1d) BaiduNetdisk (Password: 0000) Changelog: https://t.me/s/OnePlusOTA/128 Source...
forum.xda-developers.com
the links are not broken incase you can't download anything use a VPN to access the links it's just a regional thing
Click to expand...
Click to collapse
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q

jab5555 said:
You can cross flash put EU or Global on EU or Chinese variants, done it myself . It's usually the driver issue especially if I have a AMD CPU. Here's a link to global version, driver MSM tool (O2) driver ROM etc all works fine. https://mega.nz/folder/wTZRkKyA#q146JvIeKkD2B6qnIN9F2Q
Click to expand...
Click to collapse
If these things had worked for most user we would've done so but since nothing was working for us this was the only way

alihaider9083 said:
...I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
Click to expand...
Click to collapse
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.

chrisrg said:
Thank you very much for posting this; wish I'd seen it earlier. Worked smoothly first time for me too. I cannot understand why there appears to be no official source for this one. Nice one.
Click to expand...
Click to collapse
Appreciate the remarks. I guess no one has tried or was lucky to get their hands on the files for this specific varient.

alihaider9083 said:
So recently I bricked my OnePlus 9 and I was lost looking for solutions to just get this thing to turn on and I came across a thread where I found out that I could use OnePlus 9 pros Indian MSM tool to boot my phone and then flash OnePlus 9's own stockrom on top of it to make it useable. Now this was all fine but the problem came when I updated it to stock OOS 12 and surprise surprise TOUCHSCREEN DEATH! I thought something went wrong and I did the same thing over again and SURPRISE no touch screen. Then I tried OB1 and BAAM! DEATH. at this point I was frustrated and looking for answers so I contacted OnePlus on their global chat and I requested a flash to factory firmware. They agreed and their level 2 technician was trying to get my phone to boot into EDL(which be keeps referring it to as *Flash Mode*) anywho he thought I was doing something wrong and not following his instructions I knew that using the method I mentioned above it doesn't boot into EDL mode via button combo so I asked him to let me do my thing and get the phone where he wanted it to be. He was not happy with it saying that anything I do will brick my phone and I was I know I'm doing it on purpose that way it'll get stuck in edl and you'll be able to flash it. He got annoyed because his method wasn't working and he didn't like the fact that maybe I knew more about the phone than him so he just ends the session midway. #RUDEE!! anywho I noticed he forgot to delete the drivers and the extracted MSM TOOL AND FILES(note they're encrypted) I quickly took that opportunity and tried flashing it myself and SURPRISE WORKED ON THE FIRST TRY .
GUIDE!!
To anyone who wants to download this, since the tool isn't zipped, you will have to download the .ops file manually. If you select all folders, right-click, and download, Google Drive won't grab the ops file because it's too large so just make sure you go into the lemonade repack folder and download the .ops too
Disable your windows defender and enable test signing of drivers.
Enter this in terminal or CMD
bcdedit -set TESTSIGNING OFF
To install drivers open your desired bit version according to your windows.
Click on qcser64
View signatures
View certificates
Install certificates
Select Current user
Select place all certificates in the following store
Click on Browser and double click on *TRUSTED ROOT CERTIFICATION AUTHORITUES
AFTER THAT CLICK FINISH AND IT WILL BEGIN IMPORTING
Files to download on this link
upload data - Google Drive
drive.google.com
install the drivers in the folder named as L2 Drivers
Download the folder of lemonde re-pack
download the MSM tool in the root directories and replace the MSM tool in the repack folder with the tools in root directory
uncheck the *lite firehouse* option and the *SHA check* option
boot the phone in edl mode and start flashing
Note! either use a high-quality cable or the original one that came with the phone.
Click to expand...
Click to collapse
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...

xpli7 said:
Hey,
Thanks a lot for this. Unfortunately it didn't solve my problem. My OP9 is completely unresponsive and keeps going in and out of edl mode... So I keep getting the Sahara connection error at 18 sec...
Click to expand...
Click to collapse
Could you please confirm the model number of your phone

alihaider9083 said:
Could you please confirm the model number of your phone
Click to expand...
Click to collapse
One plus 9 LE2113

xpli7 said:
One plus 9 LE2113
Click to expand...
Click to collapse
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.

alihaider9083 said:
I'm really sorry to hear that, but I can suggest an alternative to you that is flashing a op9 pro Indian ROM and then flashing an official op9 (oxygen os11.10.10) "ZIP" on top of it and then try this tool. It's how I was using my phone until I got my hands on these files.
Click to expand...
Click to collapse
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care

xpli7 said:
Oh, I'll try that! I have looked at many ways and always need different files (some I actually extracted from your .ops file). I'm a Linux user... Had to rebuild a windows machine hoping it would get solved easily but no luck. I'll try what you said above or I read about a Qfil software ? Need to look into that too if nothing works. It needs files I've see around but can't remember where, though . .. thanks for the answer anyways! Take care
Click to expand...
Click to collapse
I'm really sorry man I wish you all the best. But if you can find a windows Laptop to do these things it'll make all the difference. But hoping you manage to fix it asap.

https://forum.xda-developers.com/t/...to-recover-from-a-brick-windows-only.4460859/
Try this method I came across this today thinking it might prove to be useful to you

Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
It's the first time using MSM tool
Thanks!

aldoc01 said:
Hi,
I have chinise version, but with EU ROM installed.
I have a brick (crashdump mode).
I have downloaded and follow drivers steps. (I couldnt download ...V4_win7.exe because Google drive says its a virus and doesnt allow me)
My phone is in fastboot. Now, what I have to do?
Thats what I see when I execute it:
View attachment 5662811
My device it's not being shown. But I have drivers installed and thats what I see in Device manager:
View attachment 5662835
It's the first time using MSM tool
Thanks!
Click to expand...
Click to collapse
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post

alihaider9083 said:
Hey! Would you mind telling me the model number of the phone? Like I have in the name of the topic le2113 if your phone is of any other model none of this is going to work. So if you could tell me your model number I'll guide you to the correct post
Click to expand...
Click to collapse
Hi!
Mine it's chinese version (LE2110). And I had installed EU ROM.
I don't know how or why, but I rebooted and started successfully after showing crashdump mode.
Anyway, If I learn how to unbrick it, It would be perfect for next time
Thanks!