[Q] Phone doesnt turn on, only red blinking light - Sony Xperia M2

My M2 wont turn on again, but i can go in CWM recovery
its in a kinda semi-off state and the screen is black but still like on-black. so its still shining, also i can only reboot my phone when i attach it to a computer and run ''adb reboot bootloader''
is it bricked? because i tried clearing the cashe and restoring to factory settings, can somebody help me fix this?
android 4.4.4
Installed CWM before but i think i installed it twice.

Have you tried to flash a new firmware with wiping everything? Also if you can provide a logcat that would be great

DavidMKD said:
Have you tried to flash a new firmware with wiping everything? Also if you can provide a logcat that would be great
Click to expand...
Click to collapse
I'll try that but i notist that my touch screen does work, i can click on everything and it beeps but i cant see anything. ill try this too.

DavidMKD said:
Have you tried to flash a new firmware with wiping everything? Also if you can provide a logcat that would be great
Click to expand...
Click to collapse
My adb doesnt recognise my device, and i cant get into download mode

You could try to flash a stock ftf with flashtool in flashmode

I have the same problem, only flashing red light when charging the battery. have any idea as it could refresh this external battery?

If you cant connect ur device as ADB try downloading latest google android drivers from here and try again

Related

i think my phone is bricked

hey today my phone switch off by it self so i recharged it and turn it on but it didnt load then i tried going on recover but it only flashes the screen black then it goes back to the same menu the recovery dont open i had CW recovery installed it says it the top
FASTBOOT MODE- NO BOOT OR RECOVERY IMG
i tried flashing cw recover by adb but it dont find the phone it the bottom of the screen it says
USB Control init
USB control init End.
anyone help?
sir ithink it is not yet bricked based on the description just make sure that all drivers for your phone is installed and flash the recovery again
hey thx for your quick respond i dont seem to find my device look at the printscreen attached.
the phone is underwarrenty can anyhouse lock the bootloader so i can sent it for repair? thx again
abdalah2004 said:
hey thx for your quick respond i dont seem to find my device look at the printscreen attached.
the phone is underwarrenty can anyhouse lock the bootloader so i can sent it for repair? thx again
Click to expand...
Click to collapse
Your adb setup isn't working. Have you booted your phone holding VOL+ and power? Are your ADB drivers installed?
It's either the first or the last one, check your stuff. I doubt it's bricked.
look thats what the phone do exactly when i restart it normal it keeps on the boot screen it just keep going on but when i boot with vol + i get into that menu not sure what its called where it say
REBOOT BOOTLOADER
REBOOT
RECOVERY
POWER OFF
not sure which driver i had but can u give me one to install just in case? thanks
PS. i just reinstalled the drivers from Android SDK still having the same problem
abdalah2004 said:
look thats what the phone do exactly when i restart it normal it keeps on the boot screen it just keep going on but when i boot with vol + i get into that menu not sure what its called where it say
REBOOT BOOTLOADER
REBOOT
RECOVERY
POWER OFF
not sure which driver i had but can u give me one to install just in case? thanks
Click to expand...
Click to collapse
I've never had good luck with the Android SDK driver, I use the PDANet driver instead.
http://junefabrics.com/android/index.php
That always got my phone to be detected after.
Edit: That's the fastboot screen. You should have used this when you rooted your phone, if you did it "manually".
You will use fastboot flash recovery recoveryimage.img
to flash a recovery. Recoveryimage.img will be the name of the recovery you're trying to flash.
i did and thats what i get when im trying flash the recovery
wow i restarted the phone and tried and it worked
abdalah2004 said:
i did and thats what i get when im trying flash the recovery
Click to expand...
Click to collapse
sir also try renaming the file so it will be easier to type...sir and it was flashed if it restarted in the recovery please let me know what happened

[Q] Phone Stuck In Error Screen

My Phone (Obviously T769) is stuck in the Download mode saying
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried that, Kies does not detect my phone in this mode. (I think. may be wrong)
What I did that got me up to here:
Tried to reflash to stock using Odin since my ROM was damaged.
Loads the PIT and TAR
Goes into download mode
Starts.
IT FAILS.
I try to just go back to android.
End up wid dis screen.
F
M
L.
EDIT:Fixed this by flashing AGAIN with Odin.
NOW IM IN A MOTHER
FREAKING
BOOTLOOP. (I did uncheck re-partition)(ALSO, I cannot enter download mode. Does not work for whatsoever reason.)
If anyone can help this, that would be nice
Synchorizer said:
My Phone (Obviously T769) is stuck in the Download mode saying
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried that, Kies does not detect my phone in this mode. (I think. may be wrong)
What I did that got me up to here:
Tried to reflash to stock using Odin since my ROM was damaged.
Loads the PIT and TAR
Goes into download mode
Starts.
IT FAILS.
I try to just go back to android.
End up wid dis screen.
F
M
L.
EDIT:Fixed this by flashing AGAIN with Odin.
NOW IM IN A MOTHER
FREAKING
BOOTLOOP. (I did uncheck re-partition)(ALSO, I cannot enter download mode. Does not work for whatsoever reason.)
If anyone can help this, that would be nice
Click to expand...
Click to collapse
Boot to the recovery and factory reset.
If still no go, use Odin to flash cwm and boot to it and do a factory reset, wipe cache, and davlik cache.
And again, if it still wont boot get into cwm again and do a full wipe (all of the previous wipes and format /system), then rerun Odin to flash the stock firmware.
Romman0 said:
Boot to the recovery and factory reset.
If still no go, use Odin to flash cwm and boot to it and do a factory reset, wipe cache, and davlik cache.
And again, if it still wont boot get into cwm again and do a full wipe (all of the previous wipes and format /system), then rerun Odin to flash the stock firmware.
Click to expand...
Click to collapse
How do I boot into recovery?
Also, how am I gonna flash CWM if I cannot access download mode? O_O
Synchorizer said:
How do I boot into recovery?
Also, how am I gonna flash CWM if I cannot access download mode? O_O
Click to expand...
Click to collapse
I didn't see your edit down there.
To get in into the recovery, with the phone off, hold both the volume up and down (the whole rocker) and the power button until you see the recovery.
If your having issues getting into Download mode take a look at these tips. http://forum.xda-developers.com/showpost.php?p=27360727&postcount=57
Romman0 said:
I didn't see your edit down there.
To get in into the recovery, with the phone off, hold both the volume up and down (the whole rocker) and the power button until you see the recovery.
If your having issues getting into Download mode take a look at these tips. http://forum.xda-developers.com/showpost.php?p=27360727&postcount=57
Click to expand...
Click to collapse
The phone just keeps to vibrate nonstop as I keep doing that. (Entering recovery mode) it doesnt seem to work.
Should I try ADB to force it into download mode? (If so, HALP? )
EDIT AGAIN: Im a ****ing idiot, I forghot to put the USB so I didnt go into download mode.
NOW when I try to flash something with Odin, it just detects but thenI start the process, it tells me it failed and then its not detected. . Using 1.8.5 by K0nane
What happens first : http://prntscr.com/19btkz
Romman0 said:
I didn't see your edit down there.
To get in into the recovery, with the phone off, hold both the volume up and down (the whole rocker) and the power button until you see the recovery.
If your having issues getting into Download mode take a look at these tips. http://forum.xda-developers.com/showpost.php?p=27360727&postcount=57
Click to expand...
Click to collapse
Synchorizer said:
The phone just keeps to vibrate nonstop as I keep doing that. (Entering recovery mode) it doesnt seem to work.
Should I try ADB to force it into download mode? (If so, HALP? )
Click to expand...
Click to collapse
You have to release the power button when the samsung logo appears. It should enter recovery then.
anactoraaron said:
You have to release the power button when the samsung logo appears. It should enter recovery then.
Click to expand...
Click to collapse
M04R Problems.
okay so I flashed k0nanes stock again. Since I managed to get Odin to work.
Never works, just stays in boot loop.
Dunno what to do...
Also, it didnt work...
EDIT: now its in clockwork
holy crap the dynamic crap that happens each time lol
I was dealing with this earlier today so here is how I fixed it I used the return to stock Odin thread instructions flashed the files from that thread using Odin then I got a bootloop so then I followed the instructions on this thread
http://forum.xda-developers.com/showthread.php?t=1917570
[FIX] "Your device does not support software upgrading via kies"
And soon after flashing those files I booted into recovery wiped data and cache and then rebooted fixed bootloop
Sent from my SGH-T769 using xda app-developers app
Sent from my SGH-T769 using xda app-developers app
All fixed!
Thank you guys for your help

Cannot Access CWM after flashing DoomsDayRom

Hi, I need help. I flashed the DoomsDayRom on my Xperia J ST26i. I followed all the steps and it went well until I wanted to flash a new rom. I found out that I could not access CWM on my phone even after doing the Vol. up button when there's the purple light. In fact, there was no purple light! There was only a blue light before the phone booted up. After that, I deleted the .zip file from my SD card and tried again. It was the same. Except this time, the error message "Unfortunately, the process android.process.acore has stopped.". That popped up every time I closed it and I couldn't do a thing. Please help me!:crying:
I downloaded the rom from here: http://forum.xda-developers.com/xperia-j-e/development/doomsday-rom-jlo-stock-based-t2636164
Try installing CWM from PC again.
If you still can't go to it, you may also try some xposed module (I am sorry, I forgot the name) which gives you options to reboot (even to recovery) when you try to turn off your phone by pressing and holding power button.
If that still doesn't work, you gotta flash your phone bro.
Thanks, but...
maxzeroedge said:
Try installing CWM from PC again.
If you still can't go to it, you may also try some xposed module (I am sorry, I forgot the name) which gives you options to reboot (even to recovery) when you try to turn off your phone by pressing and holding power button.
If that still doesn't work, you gotta flash your phone bro.
Click to expand...
Click to collapse
Thanks, but I've tried installing CWM again, but to no avail. I've also downloaded ROMmanager and tried to reboot into recovery, but the phone just hung. And what do u mean by flashing my phone?
Shuame
Death1792 said:
Thanks, but I've tried installing CWM again, but to no avail. I've also downloaded ROMmanager and tried to reboot into recovery, but the phone just hung. And what do u mean by flashing my phone?
Click to expand...
Click to collapse
Im using Shuame to re-unlock my bootloader and I will then root it...
By Flashing your phone, I mean using Flashtool which uses ftf files to install stock ROM into the phone. Its similar to Sony Update Service or PC Companion repair method, but doesn't require you to download firmware each time you flash.
P.S. Press Post Reply instead of Reply to avoid quoting yourself

[Q] Black screen. Please Help.

Hi guys I rooted my Z3 and installed TWRP so i could install a custom rom. So I downloaded the ROM, booted to TWRP, wiped everything, then installed the ROM. It said everything was successful so I rebooted my phone. Now there is a black screen. When I hold the power button, the phone vibrates for a second but nothing happens. When I plug my phone in, there is a red flashing light. What do I do?? Please help me.
shspeed said:
Hi guys I rooted my Z3 and installed TWRP so i could install a custom rom. So I downloaded the ROM, booted to TWRP, wiped everything, then installed the ROM. It said everything was successful so I rebooted my phone. Now there is a black screen. When I hold the power button, the phone vibrates for a second but nothing happens. When I plug my phone in, there is a red flashing light. What do I do?? Please help me.
Click to expand...
Click to collapse
which custom rom? And have you unlocked the bootloader?
gregbradley said:
which custom rom? And have you unlocked the bootloader?
Click to expand...
Click to collapse
It was the Validus ROM. I didnt unlock the bootloader. I feel like an idiot right now. Is there any way to fix this?
shspeed said:
It was the Validus ROM. I didnt unlock the bootloader. I feel like an idiot right now. Is there any way to fix this?
Click to expand...
Click to collapse
That has a custom kernel so you need to unlock the bootloader to flash it.
To repair it you can restore the backup you must have taken in recovery before flashing the rom
or
Flash a stock FTF in flashtool from flashtool.net
or
Force a software repair using PCCompanion.
gregbradley said:
That has a custom kernel so you need to unlock the bootloader to flash it.
To repair it you can restore the backup you must have taken in recovery before flashing the rom
or
Flash a stock FTF in flashtool from flashtool.net
or
Force a software repair using PCCompanion.
Click to expand...
Click to collapse
Ok thanks. How would i be able to restore the backup if i cant get into recovery?
shspeed said:
Ok thanks. How would i be able to restore the backup if i cant get into recovery?
Click to expand...
Click to collapse
The custom kernel should have recovery in it (Probably) so you can try entering by pressing the volume up or down button when you reboot the phone.
EDIT, my mistake, the kernel is not booting.
Flash a stock FTF ending in .93, root, install recovery and restore the backup
or
Force a software repair using PCCompanion, downgrade, root, install recovery, restore backup
gregbradley said:
The custom kernel should have recovery in it (Probably) so you can try entering by pressing the volume up or down button when you reboot the phone.
EDIT, my mistake, the kernel is not booting.
Flash a stock FTF ending in .93, root, install recovery and restore the backup
or
Force a software repair using PCCompanion, downgrade, root, install recovery, restore backup
Click to expand...
Click to collapse
OK im in flashtool but when i plug my phone in to flash, it asks for drivers, but I have all the drivers installed. What should I do? http://gyazo.com/29bbe3a0b82d333acc8efe03be4275c5
goto C:\flashtool\drivers
run drivers.exe
choose Z3, fastboot and flashmode drivers
restart PC and try again.
Also, it would help if you show the whole log from flashtool.....
gregbradley said:
goto C:\flashtool\drivers
run drivers.exe
choose Z3, fastboot and flashmode drivers
restart PC and try again.
Also, it would help if you show the whole log from flashtool.....
Click to expand...
Click to collapse
OK, so I updated flashtool, got all the drivers, then restarted my pc and flashed and it worked. Now I will re root and try again. Thank you so much for helping me out with this. If there is anything I can do to for you, let me know. I appreciate the time that you set out from your day to help.

Blank TWRP on Sm-g530h

Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Htxenuj said:
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Click to expand...
Click to collapse
There is already a guide available for how to flash stock rom, which you can check out here. You can get the stock rom from sammobile, the official samsung firmware resource which you can check out here.
Good luck!
Edit: You can then try to reflash twrp and if it doesn't work, post about it in the twrp thread for your device.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
RAZERZDAHACKER said:
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
Click to expand...
Click to collapse
adb works on Samsung, fastboot does not.
Sent from my SM-S903VL using Tapatalk
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
How can I boot to Download mode since I am stuck at blank screen?
Htxenuj said:
How can I boot to Download mode since I am stuck at blank screen?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=gYA3ZMlDO3Q
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Suryo75 said:
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Click to expand...
Click to collapse
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Suryo75 said:
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Click to expand...
Click to collapse
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
Just visit link with quote cwm for g530h
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
CWM is a dead project, it is no longer supported, that is why you are only finding TWRP. If you want custom recovery, use TWRP, it is a much better recovery than CWM anyway.
Sent from my LGL84VL using Tapatalk
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
try this
Is their any solution to use twrp on g530h xxu based?
On flashing many custom roms through cwm, their is nothing on screen but gray broken lines.
Please help if anyone have it's solution.

Categories

Resources